 | Monter d'un niveau |
Ashrafi, F., & Vo, H. D. (2024). Passive flow control at impeller radial bend for stall delay in centrifugal compressors with fishtail pipe diffusers. Aerospace Science and Technology, 145, 108840 (23 pages). Lien externe
Dammak, H., Versailles, P., & Vo, H. D. (2022). Coupled High Pressure-Temperature Effects on Performance of Dielectric Barrier Discharge Actuators. AIAA Journal, 60(6), 3917-3922. Lien externe
Gu, X., Vo, H. D., Mureithi, N. W., & Laurendeau, É. (2022). Plasma gurney flap flight control at low angle of attack. Journal of Aircraft, 60(1), 172-189. Lien externe
Cevik, M., Vo, H. D., & Yu, H. (2016). Casing treatment for desensitization of compressor performance and stability to tip clearance. Journal of Turbomachinery, 138(12), 16 pages. Lien externe
Akcayoz, E., Vo, H. D., & Mahallati, A. (2016). Controlling corner stall separation with plasma actuators in a compressor cascade. Journal of Turbomachinery, 138(8), 13 pages. Lien externe
Ashrafi, F., Michaud, M., & Vo, H. D. (2016). Delay of rotating stall in compressors using plasma actuators. Journal of Turbomachinery, 138(9), 12 pages. Lien externe
Erler, E., Vo, H. D., & Yu, H. (2016). Desensitization of axial compressor performance and stability to tip clearance size. Journal of Turbomachinery, 138(3), 12 pages. Lien externe
Michaud, M., Milan, P., & Vo, H. D. (2016). Low-Cost Rotating Experimentation in Compressor Aerodynamics Using Rapid Prototyping. International Journal of Rotating Machinery, 2016, 1-10. Disponible
Vo, H. D., & Trépanier, J.-Y. (2016). Undergraduate Project in Compressor Rig Design, Fabrication, and Testing for Complete Engineering Training. Journal of Engineering for Gas Turbines and Power, 138(5), 13 pages. Lien externe
Thomassin, J., Mureithi, N. W., & Vo, H. D. (2014). Mixing layer resonance under high-speed stream forcing. Journal of Sound and Vibration, 333(24), 6453-6473. Lien externe
Drolet, M., Vo, H. D., & Mureithi, N. W. (2013). Effect of Tip Clearance on the Prediction of Nonsynchronous Vibrations in Axial Compressors. Journal of Turbomachinery, 135(1). Lien externe
Versailles, P., Chishty, W. A., & Vo, H. D. (2012). Application of Dielectric Barrier Discharge to Improve the Flashback Limit of a Lean Premixed Dump Combustor. Journal of Engineering for Gas Turbines and Power, 134(3), 8-8. Lien externe
Versailles, P., Ghosh, S., Vo, H. D., & Masson, C. (2011). Preliminary assessment of wind turbine blade lift control via plasma actuation. Wind Engineering, 35(3), 339-356. Lien externe
Lemire, S., & Vo, H. D. (2011). Reduction of Fan and Compressor Wake Defect Using Plasma Actuation for Tonal Noise Reduction. Journal of Turbomachinery, 133(1), 011017-011017. Lien externe
Thomassin, J., Vo, H. D., & Mureithi, N. W. (2011). The tip clearance flow resonance behind axial compressor nonsynchronous vibration. Journal of Turbomachinery, 133(4). Lien externe
Boesch, G., Vo, H. D., Savard, B., Wanko-Tchatchouang, C., & Mureithi, N. W. (2010). Flight Control Using Wing-Tip Plasma Actuation. Journal of Aircraft, 47(6), 1836-1846. Lien externe
Versailles, P., Gingras-Gosselin, V., & Vo, H. D. (2010). Impact of pressure and temperature on the performance of plasma actuators. AIAA Journal, 48(4), 859-863. Lien externe
Vo, H. D. (2010). Role of tip clearance flow in rotating instabilities and nonsynchronous vibrations. Journal of Propulsion and Power, 26(3), 556-561. Lien externe
Vo, H. D. (2010). Rotating stall suppression in axial compressors with casing plasma actuation. Journal of Propulsion and Power, 26(4), 808-818. Lien externe
Thomassin, J., Vo, H. D., & Mureithi, N. W. (2009). Blade Tip Clearance Flow and Compressor Nonsynchronous Vibrations: the Jet Core Feedback Theory as the Coupling Mechanism. Journal of Turbomachinery, 131(1). Lien externe
Lemire, S., Vo, H. D., & Benner, M. W. (2009). Performance improvement of axial compressors and fans with plasma actuation. International Journal of Rotating Machinery, 2009, 1-13. Disponible
Vo, H. D., Tan, C. S., & Greitzer, E. M. (2008). Criteria for spike initiated rotating stall. Journal of Turbomachinery, 130(1), 1-9. Lien externe
Vo, H. D. (2007). Active suppression of rotating stall inception with distributed jet actuation. International Journal of Rotating Machinery, 2007, 1-16. Disponible
Dejour, Q., & Vo, H. D. (juin 2018). Assessment of a novel non-axial counter-rotating compressor concept for aero-engines [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (9 pages). Lien externe
Ashrafi, F., & Vo, H. D. (juin 2018). Assessment of flow control strategies for improving centrifugal compressor efficiency [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (11 pages). Lien externe
Souleimani, Y., Vo, H. D., & Yu, H. (juin 2018). Performance desensitization for a high-speed axial compressor [Communication écrite]. ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition (GT 2018), Oslo, Norway (14 pages). Lien externe
Bagade, P. M., Sengupta, T. K., Sengupta, S., & Vo, H. D. (décembre 2014). Frequency Dependent Capacitance SDBD Plasma Model for Flow Control [Communication écrite]. IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows, Goa, India. Lien externe
Akcayoz, E., Vo, H. D., & Mahallati, A. (juin 2015). Controlling corner stall separation with plasma actuators in a compressor cascade [Communication écrite]. ASME Turbo Expo : Turbine Technical Conference and Exposition (GT 2015), Montréal, Québec (11 pages). Lien externe
Ashrafi, F., Michaud, M., & Vo, H. D. (juin 2015). Delay of rotating stall in compressors using plasma actuators [Communication écrite]. ASME Turbo Expo : Turbine Technical Conference and Exposition (GT 2015), Montréal, Québec. Lien externe
Erler, E., Vo, H. D., & Yu, H. (juin 2015). Desensitization of axial compressor performance and stability to tip clearance size [Communication écrite]. ASME Turbo Expo : Turbine Technical Conference and Exposition (GT 2015), Montréal, Québec (14 pages). Lien externe
Milan, P., Demers, F., & Vo, H. D. (juin 2015). Modeling of saw-tooth DBD plasma actuators for flow control simulations [Communication écrite]. 45th AIAA Fluid Dynamics Conference, Dallas, TX, United states (11 pages). Lien externe
Djeghri, N., Vo, H. D., & Yu, H. (juin 2015). Parametric study for lossless casing treatment on a mixed-flow compressor rotor [Communication écrite]. ASME Turbo Expo : Turbine Technical Conference and Exposition (GT 2015), Montréal, Québec. Lien externe
Dumas, M., Vo, H. D., & Yu, H. (juin 2015). Post-surge load prediction for multi-stage compressors via CFD simulations [Communication écrite]. ASME Turbo Expo : Turbine Technical Conference and Exposition (GT 2015), Montréal, Québec. Lien externe
Vo, H. D., & Trépanier, J.-Y. (juin 2015). Undergraduate project in compressor rig design, fabrication and testing for complete engineering training [Communication écrite]. ASME Turbo Expo : Turbine Technical Conference and Exposition (GT 2015), Montréal, Québec. Lien externe
Drolet, M., Vo, H. D., & Mureithi, N. W. Effect of Tip Clearance on the Prediction of Non-Synchronous Vibrations in Axial Compressors [Communication écrite]. ASME Turbo Expo. Lien externe
Xu, X. F., Vo, H. D., Mureithi, N. W., & Zhang, X. F. (novembre 2010). Turbulent Boundary Layer Separation Control by Using Dbd Plasma Actuators: Part I - Experimental Investigation [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, BC, Canada. Lien externe
Xu, X. F., Vo, H. D., Mureithi, N. W., & Zhang, X. F. (novembre 2010). Turbulent Boundary Layer Separation Control by Using Dbd Plasma Actuators: Part II - Numerical Model Validation and Parametric Study [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, BC, Canada. Lien externe
Drolet, M., Thomassin, J., Vo, H. D., & Mureithi, N. W. (juin 2009). Numerical Investigation Into Non-Synchronous Vibrations of Axial Flow Compressors by the Resonant Tip Clearance Flow [Communication écrite]. ASME Turbo Expo: Power for Land, Sea, and Air (GT 2009), Orlando, Florida, USA. Lien externe
Vo, H. D., Cameron, J. D., & Morris, S. C. (juin 2008). Control of Short Length-Scale Rotating Stall Inception on a High-Speed Axial Compressor With Plasma Actuation [Communication écrite]. ASME Turbo Expo: Power for Land, Sea and Air (GT 2008), Berlin, Germany. Lien externe
Thomassin, J., Vo, H. D., & Mureithi, N. W. (juin 2009). Experimental Demonstration of the Tip Clearance Flow Resonance Behind Compressor Non-Synchronous Vibration [Communication écrite]. ASME Turbo Expo: Power for Land, Sea and Air (GT 2008), Berlin, Germany. Lien externe
Thomassin, J., Vo, H. D., & Mureithi, N. W. (mai 2007). Blade Tip Clearance Flow and Compressor NSV: The Jet Core Feedback Theory as the Coupling Mechanism [Communication écrite]. ASME Turbo Expo: Power for Land, Sea and Air (GT 2007), Montreal, Qc, Canada. Lien externe
Vo, H. D. (juin 2007). Control of rotating stall in axial compressors using plasma actuators [Communication écrite]. 37th AIAA Fluid Dynamics Conference, Miami, FL, United States. Lien externe
Vo, H. D. (mai 2007). Suppression of short length-scale rotating stall inception with glow discharge actuation [Communication écrite]. ASME Turbo Expo, Montréal, Québec. Lien externe
Vo, H. D. (2012). Apparatus and method for controlling a compressor. (Brevet no US8096756). Lien externe
Vo, H. D., Cevik, M., & Erler, E. (2016). Compressor casing. (Demande de brevet no US20160040546). Lien externe
Vo, H. D., & Mureithi, N. W. (2018). Improving aircraft performance with plasma actuators. Lien externe
