Documents dont l'auteur est "Tabatabaei, Seyed H."

Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement

Aller à : B | D | F | G | H | M | S | T

Nombre de documents: 27

B

Ben Dhieb, F., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Comparison of Crosslinking Efficiency in Dip and Roll-Deposited Coatings on Their Oxygen Barrier. ACS Omega, 4(14), 15772-15779. Lien externe

Ben Dhieb, F., Jalali Dil, E., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Erratum: Effect of nanoclay orientation on oxygen barrier properties of LbL nanocomposite coated films (vol 9, pg 1632, 2019). RSC Advances, 9(39), 22676-22676. Lien externe

Boutrouka, R., Tabatabaei, S. H., & Ajji, A. (avril 2014). Effect of molecular structure on the heat seal performance of polypropylene films [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe

D

Dhieb, F. B., García, A. C., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Study of the Crosslinking of PVA with Glyoxal in LbL Nanocomposites. Open Journal of Polymer Chemistry, 09(04), 100-116. Lien externe

F

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2015). Effect of Uniaxial Stretching on Thermal, Oxygen Barrier, and Mechanical Properties of Polyamide 6 and Poly(m-xylene adipamide) Nanocomposite Films. Polymer Engineering and Science, 55(5), 1113-1127. Lien externe

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2015). Properties of co-extruded nanoclay-filled aliphatic nylon (PA6)/linear low-density polyethylene and aromatic nylon (MXD6)/linear low-density polyethylene multilayer films. Journal of Plastic Film & Sheeting, 31(1), 45-77. Lien externe

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2014). Rheological, crystal structure, barrier, and mechanical properties of PA6 and MXD6 nanocomposite films. Polymer Engineering and Science, 54(11), 2617-2631. Lien externe

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2014). X-ray and Trichroic Infrared Orientation Analyses of Uniaxially Stretched PA6 and MXD6 Nanoclay Composite Films SO MACROMOLECULES VL 47 IS 7 BP 2384 EP 2395 DI 10.1021/ma402466c PD APR 8 2014 PY 2014 TC 2 ZB 0. Macromolecules, 47(7), 2384-2395. Lien externe

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (avril 2012). Comparative thermal and rheological study of aromatic and aliphatic polyamide nanocomposites and films [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012, Orlando, FL, United states. Lien externe

G

Ghasemi, H., Carreau, P., Kamal, M. R., & Tabatabaei, S. H. (2012). Properties of Pet/Clay Nanocomposite Films. Polymer Engineering and Science, 52(2), 420-430. Lien externe

H

Hesam, G., Carreau, P., Kamal, M. R., & Tabatabaei, S. H. (mai 2010). Study on morphology, crystallinity, barrier and mechanical properties of PET nanocomposite films [Communication écrite]. 68th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2010), Orlando, Florida USA. Lien externe

M

Mohammadi, R. S., Zolali, A. M., Tabatabaei, S. H., & Ajji, A. (2021). Interfacial localization of organoclay enhances the peelability of polyethylene/polybutene-1/organoclay nanocomposite films. Composites Part B: Engineering, 218, 9 pages. Lien externe

Mohammadi, R. S., Zolali, A. M., Tabatabaei, S. H., & Ajji, A. (2020). Nanoconfinement Induced Direct Formation of Form i and III Crystals inside in Situ Formed Poly(butene-1) Nanofibrils. Macromolecules, 53(4), 1346-1355. Lien externe

Mohammadi, R. S., Tabatabaei, S. H., & Ajji, A. (2018). Effect of nanoclay localization on the peel performance of PE based blend nanocomposite sealants. Applied Clay Science, 152, 113-123. Lien externe

Mohammadi, R. S., Tabatabaei, S. H., & Ajji, A. (2018). Peelable clay/PE nanocomposite seals with ultra-wide peelable heat seal temperature window. Applied Clay Science, 158, 132-142. Lien externe

Mohammdi, S. R., Ajji, A., & Tabatabaei, S. H. (juin 2014). Peel/seal properties of poly(ethylene methyl acrylate)/polybutene-1 blend films [Communication écrite]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (4 pages). Lien externe

S

Saffar, A., Tabatabaei, S. H., Carreau, P., Ajji, A., & Kamal, M. R. (2015). Rheology of PP/PP-g-MA and PP/PP-g-AA Blends and Incidence on Orientation and Crystalline Structure of Their Cast Films. Industrial & Engineering Chemistry Research, 54(43), 10787-10795. Lien externe

T

Tabatabaei, S. H., & Ajji, A. (2012). Crystal Structure and Orientation of Uniaxially and Biaxially Oriented Pla and Pp Nanoclay Composite Films. Journal of Applied Polymer Science, 124(6), 4854-4863. Lien externe

Tabatabaei, S. H., & Ajji, A. (2011). Effect of initial crystalline morphology on properties of polypropylene cast films. Journal of Plastic Film and Sheeting, 27(3), 223-233. Lien externe

Tabatabaei, S. H., & Ajji, A. (2011). Orientation, mechanical, and optical properties of poly (lactic acid) nanoclay composite films. Polymer Engineering and Science, 51(11), 2151-2158. Lien externe

Tabatabaei, S. H., & Ajji, A. (2011). Structure-orientation-properties relationships for polypropylene nanoclay composite films. Journal of Plastic Film and Sheeting, 27(1-2), 87-115. Lien externe

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2010). Rheological Properties of Blends of Linear and Long-Chain Branched Polypropylenes. Polymer Engineering and Science, 50(1), 191-199. Lien externe

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Effect of processing on the crystalline orientation, morphology, and mechanical properties of polypropylene cast films and microporous membrane formation. Polymer, 50(17), 4228-4240. Lien externe

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Microporous membranes obtained from PP/HDPE multilayer films by stretching. Journal of Membrane Science, 345(1-2), 148-159. Lien externe

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Rheological and thermal properties of blends of a long-chain branched polypropylene and different linear polypropylenes. Chemical Engineering Science, 64(22), 4719-4731. Lien externe

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2009). Structure and properties of MDO stretched polypropylene. Polymer, 50(16), 3981-3989. Lien externe

Tabatabaei, S. H., Carreau, P., & Ajji, A. (2008). Microporous membranes obtained from polypropylene blend films by stretching. Journal of Membrane Science, 325(2), 772-782. Lien externe

Liste produite: Sun Nov 24 04:54:30 2024 EST.

Pour citer ou exporter	Atom RSS 1.0 RSS 2.0

Documents dont l'auteur est "Tabatabaei, Seyed H."

Aide

B

D

F

G

H

M

S

T