 | Monter d'un niveau |
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Chakraborty, A., Tangestani, R., Batmaz, R., Muhammad, W., Plamondon, P., Wessman, A., Yuan, L., & Martin, E. (2022). In-process failure analysis of thin-wall structures made by laser powder bed fusion additive manufacturing. Journal of Materials Science and Technology, 98, 233-243. Lien externe
Ilia, E., Plamondon, P., Masse, J.-P., & L'Espérance, G. (2019). Copper precipitation at engine operating temperatures in powder-forged connecting rods manufactured with Fe–Cu–C alloys. Materials Science & Engineering A, 767, 138383 (9 pages). Disponible
Gervais, F., Rifai, K., Plamondon, P., Ozcan, L. C., Doucet, F., & Vidal, F. (2019). Compositional tomography of a gold-bearing sample by Laser-induced breakdown spectroscopy. Terra Nova, 31(5), 479-484. Lien externe
Bejjani, R., Balazinski, M., Attia, H., Plamondon, P., & L'Espérance, G. (2016). Chip formation and microstructure evolution in the adiabatic shear band when machining titanium metal matrix composites. International Journal of Machine Tools and Manufacture, 109, 137-146. Lien externe
Noël, A., L'Espérance, G., Cloutier, Y., Plamondon, P., Boucher, J., Philippe, S., Dion, C., Truchon, G., & Zayed, J. (2013). Assessment of the Contribution of Electron Microscopy to Nanoparticle Characterization Sampled With Two Cascade Impactors. Journal of Occupational and Environmental Hygiene, 10(3), 155-172. Lien externe
Dolez, P., Vinches, L., Wilkinson, K., Plamondon, P., & Vu-Khanh, T. (2011). Development of a test method for protective gloves against nanoparticles in conditions simulating occupational use. Journal of Physics: Conference Series, 304. Lien externe
Blais, C., L'Espérance, G., & Plamondon, P. (2009). Characterization of powders and pm components utilizing transmission electron microscopy. International Journal of Powder Metallurgy, 45(2), 29-38. Non disponible
Salehi, F., Zayed, J., Audusseau, S., Muller, C., Truchon, G., Plamondon, P., L'Espérance, G., Chevalier, G., & Mazer, B. (2009). Immunological Responses in C3h/Hej Mice Following Nose-Only Inhalation Exposure to Different Sizes of Beryllium Metal Particles. Journal of Applied Toxicology, 29(1), 61-68. Lien externe
Kunst, M., Fischersworring-Bunk, A., L'Espérance, G., Plamondon, P., & Glatzel, U. (2009). Microstructure and dislocation analysis after creep deformation of die-cast Mg-Al-Sr (AJ) alloy. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, 510-511(3-6), 387-392. Lien externe
Muller, C., L'Espérance, G., Plamondon, P., Kennedy, G. G., & Zayed, J. (2008). Characterization of Beryllium Particles From Calsifrit. Journal of Toxicology and Environmental Health-Part a-Current Issues, 71(16), 1091-1099. Lien externe
Rouleau, M., Dion, C., Plamondon, P., Kennedy, G. G., L'Espérance, G., & Zayed, J. (2005). Physical and Chemical Characterization of Beryllium Particles From Several Workplaces in Québec, Canada - Part A: Determining Methods for the Analysis of Low Levels of Beryllium. Journal of Toxicology and Environmental Health-Part a-Current Issues, 68(21), 1889-1905. Lien externe
Rouleau, M., Dion, C., Plamondon, P., L'Espérance, G., & Zayed, J. (2005). Physical and Chemical Characterization of Beryllium Particles From Several Workplaces in Québec, Canada - Part B: Time-of-Flight Secondary-Ion Mass Spectroscopy. Journal of Toxicology and Environmental Health-Part a-Current Issues, 68(21), 1907-1916. Lien externe
Beaupré, L. A., Salehi, F., Zayed, J., Plamondon, P., & L'Espérance, G. (2004). Physical and Chemical Characterization of Mn Phosphate/Sulfate Mixture Used in an Inhalation Toxicology Study. Inhalation Toxicology, 16(4), 231-244. Lien externe
Bernier, F., Gauthier, M., Plamondon, P., & L'Espérance, G. (mai 2011). Copper strengthening of PM steel parts [Communication écrite]. 2011 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2011, San Francisco, CA, United states. Non disponible
Plamondon, P. (2001). Contribution à la compréhension des facteurs influençant la compressibilité et l'usinabilité de poudres d'acier [Mémoire de maîtrise, École Polytechnique de Montréal]. Non disponible
