 | Monter d'un niveau |
Ajji, A., Jalali Dil, E., Saffar, A., & Kanani Aghkand, Z. (2023). Heat Sealing in Packaging. Lien externe
Ben Dhieb, F., Jalali Dil, E., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Effect of nanoclay orientation on oxygen barrier properties of LbL nanocomposite coated films. RSC Advances, 9(3), 1632-1641. Disponible
Ben Dhieb, F., Jalali Dil, E., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Erratum: Effect of nanoclay orientation on oxygen barrier properties of LbL nanocomposite coated films (vol 9, pg 1632, 2019). RSC Advances, 9(39), 22676-22676. Lien externe
Hoemann, C. D., Gonzalez, J. R., Guzman-Morales, J., Chen, G., Jalali Dil, E., & Favis, B. D. (2022). Chitosan coatings with distinct innate immune bioactivities differentially stimulate angiogenesis, osteogenesis and chondrogenesis in poly-caprolactone scaffolds with controlled interconnecting pore size. Bioactive Materials, 10, 430-442. Lien externe
Haji Abdolrasouli, M., Jalali Dil, E., & Khorshidi Mal Ahmadi, J. (2021). Interfacial lubricating effect in phase coarsening of polyethylene/polycaprolactone/polyethylene oxide tri-continuous polymer blends. Polymer Engineering and Science, 61(11), 2771-2781. Lien externe
Haji Abdolrasouli, M., Jalali Dil, E., & Khorshidi Mal Ahmadi, J. (2021). A new empirical model for quiescent annealing of binary co-continuous polymer blends. Iranian Polymer Journal, 30(6), 559-568. Lien externe
Jalali Dil, E., Arjmand, M., Otero Navas, I., Sundararaj, U., & Favis, B. D. (2020). Interface Bridging of Multiwalled Carbon Nanotubes in Polylactic Acid/Poly(butylene adipate-co-terephthalate): Morphology, Rheology, and Electrical Conductivity. Macromolecules, 52(22), 10267-10277. Lien externe
Jalali Dil, E., Ben Dhieb, F., & Ajji, A. (2019). Modeling the effect of nanoplatelets orientation on gas permeability of polymer nanocomposites. Polymer, 168, 126-130. Lien externe
Jalali Dil, E., Kim, S. C., Saffar, A., Ajji, A., Zare, R. N., Sattayapiwat, A., Esguerra, V., & Bowen, R. A. R. (2018). Surface characterization and free thyroid hormones response of chemically modified poly(ethylene terephthalate) blood collection tubes. Applied Surface Science, 442, 602-612. Lien externe
Jalali Dil, E., Arjmand, M., Li, Y., Sundararaj, U., & Favis, B. D. (2016). Assembling copper nanowires at the interface and in discrete phases in PLA-based polymer blends. European Polymer Journal, 85, 187-197. Lien externe
Jalali Dil, E., Virgilio, N., & Favis, B. D. (2016). The effect of the interfacial assembly of nano-silica in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends on the morphology, rheology and mechanical properties. European Polymer Journal, 85, 635-646. Lien externe
Jalali Dil, E. (2015). Localization of Solid Micro and Nano-Inclusions in Heterophase Bioplastic Blends [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Jalali Dil, E., & Favis, B. D. (2015). Localization of micro and nano- silica particles in a high interfacial tension poly(lactic acid)/low density polyethylene system. Polymer, 77, 156-166. Lien externe
Jalali Dil, E., & Favis, B. D. (2015). Localization of micro- and nano-silica particles in heterophase poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends. Polymer, 76, 295-306. Lien externe
Jalali Dil, E., Carreau, P., & Favis, B. D. (2015). Morphology, miscibility and continuity development in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends. Polymer, 68, 202-212. Lien externe
Jalali Dil, E., & Favis, B. D. (avril 2014). Effect of the localization of silica particles on the morphology of poly(lactic acid)/polyethylene blends [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Jalali Dil, E., Carreau, P., Ravati, S., & Favis, B. D. (avril 2012). Morphology of poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends and its composite with spherical silica particles [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Orlando, FL, United states. Lien externe
Jalali Dil, E., & Favis, B. D. (avril 2012). Selective localization of spherical silica particles in heterophase poly(lactic acid)/ low density polyethylene blends [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers 2012 (ANTEC 2012), Orlando, FL, United states. Lien externe
Jalali Dil, E., Pourmahdian, S., Vatankhah, M., & Afshar Taromi, F. (2009). Effect of dealcoholation of support in MgCl₂-supported Ziegler-Natta catalysts on catalyst activity and polypropylene powder morphology. Polymer Bulletin, 64(5), 445-457. Lien externe
Kanani Aghkand, Z., Jalali Dil, E., Ajji, A., & Dubois, C. (2018). Simulation of Heat Transfer in Heat Sealing of Multilayer Polymeric Films: Effect of Process Parameters and Material Properties. Industrial & Engineering Chemistry Research, 57(43), 14571-14582. Lien externe
Liberelle, B., Jalali Dil, E., Sabri, F., Favis, B. D., De Crescenzo, G., & Virgilio, N. (2021). Immobilizing Enzyme Biocatalysts onto Porous Polymer Monoliths Prepared from Cocontinuous Polymer Blends. ACS Applied Polymer Materials, 3(12), 6359-6365. Lien externe
Salehi Morgani, M., Jalali Dil, E., & Ajji, A. (2021). Effect of processing condition and antioxidants on visual properties of multilayer post-consumer recycled high density polyethylene films. Waste Management, 126, 239-246. Lien externe
Saffar, A., Jalali Dil, E., Carreau, P., Ajji, A., & Kamal, M. R. (2016). Phase behavior of binary blends of PP/PP‐g‐AA: limitations of the conventional characterization techniques. Polymer International, 65(5), 508-515. Lien externe
Wang, L., Jalali Dil, E., & Ajji, A. (2021). Effect of Uniaxial Stretching on Molecular Orientation, Crystallinity and Oxygen Permeability of Ethylene Vinyl Alcohol. International Polymer Processing, 36(3), 314-321. Lien externe
