 | Up a level |
Collaboration networkThis graph maps the connections between all the collaborators of {}'s publications listed on this page.
Each link represents a collaboration on the same publication. The thickness of the link represents the number of collaborations.
Use the mouse wheel or scroll gestures to zoom into the graph.
You can click on the nodes and links to highlight them and move the nodes by dragging them.
Hold down the "Ctrl" key or the "⌘" key while clicking on the nodes to open the list of this person's publications.
Ajersch, F., & Ilinca, F. (2017). Review of modeling and simulation of galvanizing operations. Steel Research International, 89(1), 12 pages. External link
Ajersch, F., Ilinca, F., & Goodwin, F. E. (2015, May). Experimental Study of Skimmings Generation in Galvanizing Baths With Variable Al and Mg Compositions [Paper]. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech 2015), Toronto, ON, Canada. Unavailable
Ajersch, F., Ilinca, F., Hetu, J.-F., & Goodwin, F. E. (2006). Numerical simulation of the rate of dross formation in continuous galvanizing baths. Iron and Steel Technology, 3(8), 93-101. External link
Blais, B., & Ilinca, F. (2018). Development and validation of a stabilized immersed boundary CFD model for freezing and melting with natural convection. Computers & Fluids, 172, 564-581. Available
Blais, B., & Ilinca, F. (2017, March). A robust modeling tool for the analysis of solidification and melting processes in SCR tanks [Presentation]. In Automotive Energy Storage Systems, Novi, Michigan. Unavailable
Giguere, J.-S., Ilinca, F., & Pelletier, D. (2010). Finite element and sensitivity analysis of thermally induced flow instabilities. International Journal for Numerical Methods in Fluids, 63(10), 1167-1192. External link
Ilinca, F., Yu, K. R., & Blais, B. (2019). The effect of viscosity on free surface flow inside an angularly oscillating rectangular tank. Computers & Fluids, 183, 160-176. External link
Ilinca, F., & Blais, B. (2018, May). Towards a parallel multiphysics model for phase change in enclosed [Paper]. 30th International Conference on Parallel Computational Fluids Dynamics (Parallel CFP 2018), Indianapolis, Indiana. Unavailable
Ilinca, F., Blais, B., & Yu, K. (2017, July). Modeling of solidification and thawing problems with free surfaces in rigid containers [Paper]. 14th US National Congress on Computational Mechanics (USNCCM 2017), Montréal, Québec. Unavailable
Ilinca, F., Blais, B., & Yu, K. (2017, July). On the solution of 3D free surface flows using enriched pressure shape functions [Presentation]. In 14th US National Congress on Computational Mechanics (USNCCM 2017), Montréal, Québec. External link
Ilinca, F., Ajersch, F., & Goodwin, F. E. (2015, May). Numerical Analysis of the Modification of Flow Using a Pumping System in the Galvanizing Bath [Paper]. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech 2015), Toronto, ON, Canada. Unavailable
Ilinca, F., & Hétu, J.-F. (2010). Three-dimensional numerical simulation of injection moulding. In Numerical simulations: Examples and applications in Computational Fluid Dynamics (pp. 173-192). External link
Ilinca, F., Hétu, J.-F., Moisan, J.-F., & Ajersch, F. (2008). Three-dimensional injection molding simulation of AZ91D semi-solid magnesium alloy. International Journal of Material Forming, 1(1), 3-12. External link
Ilinca, F., Hétu, J.-F., Ajersch, F., & Moisan, J.-F. (2008, September). Mold filling simulation of semi-solid magnesium alloys [Paper]. 10th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2008), Aachen, Germany. Published in Solid State Phenomena, 141-143. External link
Ilinca, F., Hetu, J.-F., & Ajersch, F. (2005, June). Numerical simulation of 3D turbulent flow and heat transfer in a continuous galvanizing bath [Paper]. 17th AIAA Computational Fluid Dynamics Conference, Toronto, ON, Canada. External link
Ilinca, F., Pelletier, D., & Garon, A. (1996, June). An approach for positivity preserving formulations for two equations turbulence model [Paper]. 4th Annual Conference of the Computational Fluid Dynamics Society of Canada, Ottawa, Ont. Unavailable
Ilinca, F. (1996). Méthodes d'éléments finis adaptatives pour les écoulements turbulents [Ph.D. thesis, École Polytechnique de Montréal]. Available
Ilinca, F., & Pelletier, D. (1996, January). A pressure based adaptive finite element algorithm for compressible viscous flows [Paper]. 34th Aerospace Sciences Meeting and Exhibit, Reno, NV, United States. External link
Ilinca, F., Pelletier, D., & Arnoux-Guisse, F. (1995, January). An adaptive finite element method for turbulent free shear flows [Paper]. Aiaa, Aerospace Sciences Meeting and Exhibit, 33rd, Reno, Nv. External link
Pelletier, D., & Ilinca, F. (2010, January). Adaptivity and uncertainty: Towards rigorous verification and validation of flow simulations [Paper]. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, FL, United states. External link
Pelletier, D., Ignat, L., & Ilinca, F. (1995, January). Adaptive finite element method for conjugate heat transfer [Paper]. 33rd AIAA, Aerospace Sciences Meeting and Exhibit, Reno, NV. Published in Numerical Heat Transfer. Part A, Applications, 32(3). External link
Pelletier, D., Ignat, L., & Ilinca, F. (1995, January). An adaptive finite element method for conjugate heat transfer [Paper]. 33rd Aerospace Sciences Meeting and Exhibit, Reno, NV, United states. External link
Pelletier, D., & Ilinca, F. (1994, June). An adaptive finite element method for forced convective heat transfer [Paper]. AIAA and ASME, Joint Thermophysics and Heat Transfer Conference, 6th, Colorado Springs, CO. External link
Pelletier, D., Hétu, J.-F., & Ilinca, F. (1994). Adaptive finite element method for thermal flow problems. AIAA Journal, 32(4), 741-747. External link
Pelletier, D., Ilinca, F., & Hétu, J.-F. (1994). Adaptive finite element method for turbulent flow near a propeller. AIAA Journal, 32(11), 2186-2193. External link
Pelletier, D., Ilinca, F., & Hétu, J.-F. (1994). Adaptive remeshing for convective heat transfer with variable fluid properties. Journal of Thermophysics and Heat Transfer, 8(4), 687-694. External link
Pelletier, D., Ilinca, F., & Hetu, J.-F. (1993, July). An adaptive finite element method for connective heat transfer with variable fluid properties [Paper]. 28th AIAA Thermophysics Conference, Orlando, FL. External link
Pelletier, D., Ilinca, F., & Hetu, J.-F. (1993, July). An adaptive finite element method for turbulent free shear flow past a propeller [Paper]. 11th Computational Fluid Dynamics Conference, Orlando, FL. External link
Willis, D. J., Ilinca, F., Ajersch, F., & Setargew, N. (2007). Fluid Flow Modelling in a 55% Al-Zn Coating Metal Pot. Progress in Computational Fluid Dynamics, 7(2-4), 183-194. External link
Willis, D. J., Ilinca, F., & Ajersch, F. Fluid flow modeling in a 55% Al-Zn pot [Paper]. Galvatech '04 : 6th international conference on zinc and zinc alloy coated steel sheet. Unavailable
Yu, K., Ilinca, F., Blais, B., & Goodwin, F. E. (2018, May). Three-dimensional numerical model development for the investigation of the gas jet wiping process on the flow behaviors near the galvanizing bath surface [Paper]. AIS Technical Conference, Philadelphia, Pennsylvania. External link
