Up a level |
This graph maps the connections between all the collaborators of {}'s publications listed on this page.
Each link represents a collaboration on the same publication. The thickness of the link represents the number of collaborations.
Use the mouse wheel or scroll gestures to zoom into the graph.
You can click on the nodes and links to highlight them and move the nodes by dragging them.
Hold down the "Ctrl" key or the "⌘" key while clicking on the nodes to open the list of this person's publications.
Boulvert, J., Humbert, T., Romero-Garcia, V., Gabard, G., Fotsing, E.-R., Ross, A., Mardjono, J., & Groby, J.-P. (2022). Perfect, broadband, and sub-wavelength absorption with asymmetric absorbers: Realization for duct acoustics with 3D printed porous resonators. Journal of Sound and Vibration, 523, 116687 (21 pages). External link
Boulvert, J., Costa-Baptista, J., Fotsing, E.-R., Cavalieri, T., Romera-García, V., Gabard, G., Ross, A., Mardjono, J., & Croby, J.-P. (2021, March). 3D printed folded porous material for sub-wavelength absorption of sound [Paper]. 6th Symposium on the Acoustics of Poro-Elastic Materials (SAPEM 2020) (2 pages). External link
Boulvert, J., Costa-Baptista, J., Cavalieri, T., Perna, M., Fotsing, E.-R., Romero-García, V., Gabard, G., Ross, A., Mardjono, J., & Groby, J.-P. (2020). Acoustic modeling of micro-lattices obtained by additive manufacturing. Applied Acoustics, 164, 9 pages. External link
Boulvert, J., Costa-Baptista, J., Cavalieri, T., Romero-Garcia, V., Gabard, G., Fotsing, E.-R., Ross, A., Perna, M., Mardjono, J., & Groby, J.-P. (2020). Folded metaporous material for sub-wavelength and broadband perfect sound absorption. Applied Physics Letters, 117(25), 6 pages. External link
Boulvert, J., Cavalieri, T., Costa-Baptista, J., Schwan, L., Romero-Garcia, V., Gabard, G., Fotsing, E.-R., Ross, A., Mardjono, J., & Groby, J.-P. (2019). Optimally graded porous material for broadband perfect absorption of sound. Journal of Applied Physics, 126(17), 15 pages. External link
Billotte, C., Fotsing, E.-R., & Ruiz, E. (2017). Optimization of alumina slurry for oxide-oxide ceramic composites manufactured by injection molding. Advances in Materials Science and Engineering, 2017, 1-9. Available
Costa-Baptista, J., Fotsing, E.-R., Mardjono, J., Therriault, D., & Ross, A. (2023). Hybrid acoustic materials through assembly of tubes and microchannels: design and experimental investigation. Rapid Prototyping Journal, 29(6), 1230-1239. Available
Costa-Baptista, J., Fotsing, E.-R., Mardjono, J., Therriault, D., & Ross, A. (2022). Design and fused filament fabrication of multilayered microchannels for subwavelength and broadband sound absorption. Additive Manufacturing, 55, 102777 (17 pages). Available
Fotsing, E.-R., Dubourg, A., Ross, A., & Mardjono, J. (2019). Acoustic properties of periodic micro-structures obtained by additive manufacturing. Applied Acoustics, 148, 322-331. External link
Fotsing, E.-R., Rezabeigi, E., Ross, A., Wood-Adams, P. M., & Drew, R. A. L. (2019). Acoustical characteristics of ultralight polylactic acid foams fabricated via solution phase inversion. Journal of Porous Materials, 26(6), 1781-1794. External link
Favre, A., Fotsing, E.-R., Lévesque, M., & Ruiz, E. (2015). Comparative study of fiber-reinforced elastomer composites subjected to accelerated aging in water. Jounal of Elastomers and Plastics, 47(8), 719-737. External link
Kliem, M., Høgsberg, J., Vanwalleghem, J., Filippatos, A., Hoschützky, S., Fotsing, E.-R., & Berggreen, C. (2019). Damping analysis of cylindrical composite structures with enhanced viscoelastic properties. Applied Composite Materials, 26(1), 85-113. External link
Piollet, E., Fotsing, E.-R., Ross, A., & Michon, G. (2019). High damping and nonlinear vibration of sandwich beams with entangled cross-linked fibres as core material. Composites Part B: Engineering, 168, 353-366. External link
Sommier, E., Fotsing, E.-R., Ross, A., & Lavoie, M. (2016). Characterization of the injection molding process of passive vibration isolators. Journal of Elastomers and Plastics, 48(1), 58-79. External link