 | Monter d'un niveau |
Farahani, R. D., Gagne, M., Sapieha, J.-E., & Therriault, D. (2016). Electrically Conductive Silver Nanoparticles-Filled Nanocomposite Materials as Surface Coatings of Composite Structures. Advanced Engineering Materials, 18(7), 1189-1199. Lien externe
Farahani, R. D., Sapieha, J.-E., & Therriault, D. (2015). Enhanced conductivity of nanocomposite films through heterogeneous distribution of nanofillers during processing. Materials & Design, 88, 1175-1182. Lien externe
Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., Navas, I. O., Lévesque, M., & Therriault, D. (2022). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible
Pierre, J., Chenier, G., Farahani, R. D., & Therriault, D. (2022). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible
Chauvette, J.-F., Hia, I. L., Farahani, R. D., & Therriault, D. (2022). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible
Farahani, R. D., Lévesque, M., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farahani, R. D., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Abderrefai, Y., Farahani, R. D., & Therriault, D. (2021). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible
Pierre, J., Verville, M., Farahani, R. D., & Therriault, D. (2021). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible
Chauvette, J.-F., Hia, I. L., Farahani, R. D., & Therriault, D. (2021). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible
Farahani, R. D., Lévesque, M., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farahani, R. D., Lévesque, M., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farahani, R. D., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., & Therriault, D. (2020). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible
Pierre, J., Farahani, R. D., & Therriault, D. (2020). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible
Chauvette, J.-F., Hia, I. L., Brzeski, D., Farahani, R. D., & Therriault, D. (2020). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible
Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of reinforced composites for aerospace applications – Phase 2. (Rapport technique). Non disponible
Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., & Therriault, D. (2019). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible
Pierre, J., Farahani, R. D., & Therriault, D. (2019). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible
Farahani, R. D., Hia, I. L., Chauvette, J.-F., Gregorio, P., Brzeski, D., & Therriault, D. (2019). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible
Himmiche, S., Trofimov, A., Eren, Z., Farahani, R. D., Lévesque, M., & Therriault, D. (2019). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible
Farahani, R. D., Brzeski, D., Hia, I. L., Diouf-Lewis, A., Piccirelli, N., & Therriault, D. (septembre 2021). 3D printing of abradable polymer composite materials: Materials formulations and characterization [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Non disponible
Therriault, D., & Farahani, R. D. (novembre 2021). Design of multifunctional composites and their advanced additive manufacturing [Communication écrite]. Additive Fabrication of Composites (ADDFABCONF 2021). Lien externe
Diouf-Lewis, A., Abderrafai, Y., Iervolino, F., Pierre, J., Farahani, R. D., Piccirelli, N., & Therriault, D. (septembre 2021). Fabrication and characterization of fiber-reinforced PEEK thermoplastic 3D printing filaments [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Non disponible
Diouf-Lewis, A., Mastromatteo, L., Farahani, R. D., Piccirelli, N., & Therriault, D. (novembre 2020). Characterization and additive manufacturing of aerospace-grade thermoplastics composites [Communication écrite]. 7th Global Conference on Polymer and Composite Materials (PCM 2020). Non disponible
Farahani, R. D., & Therriault, D. (octobre 2018). Advanced additive manufacturing of multifunctional composites [Communication écrite]. Society of Engineering Science (SES 2018), Madrid, Spain. Non disponible
Farahani, R. D., & Therriault, D. (juillet 2013). Electrical conductivity of hybrid/patterned nanocomposites films [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe
Farahani, R. D., Sapieha, J.-E., & Therriault, D. (septembre 2013). Improvement of electrical conductivity in polymer nanocomposites featuring heterogeneous nanofillers distribution [Communication écrite]. 28th Annual Technical Conference of the American Society for Composites (ASC 2013), State College, PA, United states. Lien externe
Farahani, R. D., Lévesque, M., & Therriault, D. (mars 2012). Nanocomposite materials in three-dimensional freestanding microsensors [Communication écrite]. NanoQuebec, Montréal, Québec. Non disponible
Aïssa, B., Therriault, D., Farahani, R. D., & Merle, P. (novembre 2011). Fabrication of three-dimensional microvascular single-walled carbon nanotubes/5-ethylidene-2-norbornene nanocomposite beams by infiltration [Communication écrite]. MRS Fall Meeting 2011, Boston, MA, USA. Non disponible
Moussaddy, H., Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Mechanical properties of chemically-treated carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Farahani, R. D., Moussaddy, H., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Ultraviolet direct-write fabrication of chemically treated single-walled carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible
Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). UV-assisted directwrite fabrication of microstructures using biotin-grafted single-walled carbon nanotubes/epoxy nanocomposites : mechanical and rheological studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible
Dalir, H., Farahani, R. D., Lévesque, M., & Therriault, D. (novembre 2010). UV-assisted direct-write assembly of scaffold-templated nanoclay composites via bioting-streptavidin interactions [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada. Lien externe
Farahani, R. D., & Therriault, D. (juillet 2019). Design of multifunctional composites and their multi-material additive manufacturing [Résumé]. International Conference on Advances in Functional Materials, Washington, DC, United States. Lien externe
Diouf-Lewis, A., Iervolino, F., Abderrafai, Y., Pierre, J., Farahani, R. D., Piccirelli, N., & Therriault, D. (août 2019). Design of high temperature resistant thermoplastic composites for FDM 3D printing [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia. Non disponible
Therriault, D., & Farahani, R. D. (août 2019). From the microfabrication of microvascular networks to the additive manufacturing of multifunctional composites [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia. Non disponible
Farahani, R. D., Dalir, H., Lévesque, M., & Therriault, D. (novembre 2010). Carbon nanotube spatial orientation in nanocomposite microstructures by high shear flow [Présentation]. Dans ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, British Columbia. Non disponible
