Documents dont l'auteur est "Farahani, R. D."

Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement

Aller à : A | C | D | F | H | M | P | T

Nombre de documents: 39

A

Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., Navas, I. O., Lévesque, M., & Therriault, D. (2022). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible

Abderrefai, Y., Farahani, R. D., & Therriault, D. (2021). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible

Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., & Therriault, D. (2020). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible

Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., & Therriault, D. (2019). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible

Aïssa, B., Therriault, D., Farahani, R. D., & Merle, P. (novembre 2011). Fabrication of three-dimensional microvascular single-walled carbon nanotubes/5-ethylidene-2-norbornene nanocomposite beams by infiltration [Communication écrite]. MRS Fall Meeting 2011, Boston, MA, USA. Non disponible

C

Chauvette, J.-F., Hia, I. L., Farahani, R. D., & Therriault, D. (2022). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible

Chauvette, J.-F., Hia, I. L., Farahani, R. D., & Therriault, D. (2021). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible

Chauvette, J.-F., Hia, I. L., Brzeski, D., Farahani, R. D., & Therriault, D. (2020). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible

D

Diouf-Lewis, A., Abderrafai, Y., Iervolino, F., Pierre, J., Farahani, R. D., Piccirelli, N., & Therriault, D. (septembre 2021). Fabrication and characterization of fiber-reinforced PEEK thermoplastic 3D printing filaments [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Non disponible

Diouf-Lewis, A., Mastromatteo, L., Farahani, R. D., Piccirelli, N., & Therriault, D. (novembre 2020). Characterization and additive manufacturing of aerospace-grade thermoplastics composites [Communication écrite]. 7th Global Conference on Polymer and Composite Materials (PCM 2020). Non disponible

Diouf-Lewis, A., Iervolino, F., Abderrafai, Y., Pierre, J., Farahani, R. D., Piccirelli, N., & Therriault, D. (août 2019). Design of high temperature resistant thermoplastic composites for FDM 3D printing [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia. Non disponible

Dalir, H., Farahani, R. D., Lévesque, M., & Therriault, D. (novembre 2010). UV-assisted direct-write assembly of scaffold-templated nanoclay composites via bioting-streptavidin interactions [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, Canada. Lien externe

F

Farahani, R. D., Brzeski, D., Hia, I. L., Diouf-Lewis, A., Piccirelli, N., & Therriault, D. (septembre 2021). 3D printing of abradable polymer composite materials: Materials formulations and characterization [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Non disponible

Farahani, R. D., Lévesque, M., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible

Farahani, R. D., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible

Farahani, R. D., Lévesque, M., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible

Farahani, R. D., & Therriault, D. (2020). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible

Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible

Farahani, R. D., & Therriault, D. (2019). Advanced manufacturing of reinforced composites for aerospace applications – Phase 2. (Rapport technique). Non disponible

Farahani, R. D., & Therriault, D. (juillet 2019). Design of multifunctional composites and their multi-material additive manufacturing [Résumé]. International Conference on Advances in Functional Materials, Washington, DC, United States. Lien externe

Farahani, R. D., Hia, I. L., Chauvette, J.-F., Gregorio, P., Brzeski, D., & Therriault, D. (2019). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible

Farahani, R. D., & Therriault, D. (octobre 2018). Advanced additive manufacturing of multifunctional composites [Communication écrite]. Society of Engineering Science (SES 2018), Madrid, Spain. Non disponible

Farahani, R. D., Gagne, M., Sapieha, J.-E., & Therriault, D. (2016). Electrically Conductive Silver Nanoparticles-Filled Nanocomposite Materials as Surface Coatings of Composite Structures. Advanced Engineering Materials, 18(7), 1189-1199. Lien externe

Farahani, R. D., Sapieha, J.-E., & Therriault, D. (2015). Enhanced conductivity of nanocomposite films through heterogeneous distribution of nanofillers during processing. Materials & Design, 88, 1175-1182. Lien externe

Farahani, R. D., & Therriault, D. (juillet 2013). Electrical conductivity of hybrid/patterned nanocomposites films [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Farahani, R. D., Sapieha, J.-E., & Therriault, D. (septembre 2013). Improvement of electrical conductivity in polymer nanocomposites featuring heterogeneous nanofillers distribution [Communication écrite]. 28th Annual Technical Conference of the American Society for Composites (ASC 2013), State College, PA, United states. Lien externe

Farahani, R. D., Lévesque, M., & Therriault, D. (mars 2012). Nanocomposite materials in three-dimensional freestanding microsensors [Communication écrite]. NanoQuebec, Montréal, Québec. Non disponible

Farahani, R. D., Moussaddy, H., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Ultraviolet direct-write fabrication of chemically treated single-walled carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible

Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). UV-assisted directwrite fabrication of microstructures using biotin-grafted single-walled carbon nanotubes/epoxy nanocomposites : mechanical and rheological studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible

Farahani, R. D., Dalir, H., Lévesque, M., & Therriault, D. (novembre 2010). Carbon nanotube spatial orientation in nanocomposite microstructures by high shear flow [Présentation]. Dans ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), Vancouver, British Columbia. Non disponible

H

Himmiche, S., Trofimov, A., Eren, Z., Farahani, R. D., Lévesque, M., & Therriault, D. (2019). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible

M

Moussaddy, H., Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Mechanical properties of chemically-treated carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe

P

Pierre, J., Chenier, G., Farahani, R. D., & Therriault, D. (2022). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible

Pierre, J., Verville, M., Farahani, R. D., & Therriault, D. (2021). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible

Pierre, J., Farahani, R. D., & Therriault, D. (2020). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible

Pierre, J., Farahani, R. D., & Therriault, D. (2019). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible

T

Therriault, D., & Farahani, R. D. (novembre 2021). Design of multifunctional composites and their advanced additive manufacturing [Communication écrite]. Additive Fabrication of Composites (ADDFABCONF 2021). Lien externe

Therriault, D., & Farahani, R. D. (août 2019). From the microfabrication of microvascular networks to the additive manufacturing of multifunctional composites [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM22), Melbourne, Australia. Non disponible

Liste produite: Sat Dec 21 05:03:54 2024 EST.

Pour citer ou exporter	Atom RSS 1.0 RSS 2.0

Documents dont l'auteur est "Farahani, R. D."

Aide

A

C

D

F

H

M

P

T