 | Up a level |
Collaboration networkThis graph maps the connections between all the collaborators of {}'s publications listed on this page.
Each link represents a collaboration on the same publication. The thickness of the link represents the number of collaborations.
Use the mouse wheel or scroll gestures to zoom into the graph.
You can click on the nodes and links to highlight them and move the nodes by dragging them.
Hold down the "Ctrl" key or the "⌘" key while clicking on the nodes to open the list of this person's publications.
Word cloudA word cloud is a visual representation of the most frequently used words in a text or a set of texts. The words appear in different sizes, with the size of each word being proportional to its frequency of occurrence in the text. The more frequently a word is used, the larger it appears in the word cloud. This technique allows for a quick visualization of the most important themes and concepts in a text.
In the context of this page, the word cloud was generated from the publications of the author {}. The words in this cloud come from the titles, abstracts, and keywords of the author's articles and research papers. By analyzing this word cloud, you can get an overview of the most recurring and significant topics and research areas in the author's work.
The word cloud is a useful tool for identifying trends and main themes in a corpus of texts, thus facilitating the understanding and analysis of content in a visual and intuitive way.
McNeill, J., VanDyk, R., Simha, C. H. M., Dadouche, A., Bäckman, D., Ensan, M. N., & Gholipour, J. (2025). Modeling impact of drones on flat plates. Aerospace Science and Technology, 161, 110103 (15 pages). Available
Dadouche, A., Galeote, B., Breithaupt, T., Greer, A., Backman, D., Li, G., Vidal, C., & Gould, R. (2020). Drone impact assessment on aircraft structure: flat plate testing and analysis. (Technical Report n° CR-GTL-2020-0053). External link
Dadouche, A., Greer, A., Galeote, B., Breithaupt, T., Vidal, C., & Gould, R. (2020). Drone impact assessment on aircraft structure: windshield and leading edge testing and analysis. (Technical Report n° CR-GTL-2020-0054). External link
Dadouche, A., & Yang, Q. (2020, September). Influence of Coating Technologies on Frictional Properties of Foil Bearings During Start/Stop Conditions [Abstract]. ASME 2020 Turbo Expo. External link
Rezaei, A., & Dadouche, A. (2017). Multi-sensor-based framework for gear condition monitoring - Part II. International Journal of Condition Monitoring, 7(1), 16-24. External link
Rezaei, A., Dadouche, A., Anderson, R., & Lipsett, M. (2016). Multi-sensor-based framework for gear condition monitoring – Part I. International Journal of Condition Monitoring, 6(1), 17-25. External link
Dadouche, A., & Conlon, M. J. (2016). Operational performance of textured journal bearings lubricated with a contaminated fluid. Tribology International, 93, 377-389. External link
Irissou, E., Dadouche, A., & Lima, R. S. (2014). Tribological Characterization of Plasma-Sprayed CoNiCrAlY-BN Abradable Coatings. Journal of Thermal Spray Technology, 23(1), 252-261. External link
Dmochowski, W. M., Conlon, M. J., Dadouche, A., & Fillon, M. (2013). Dynamic Characteristics of Fluid Film Bearings. In Wang, Q. J., & Chung, Y.-W. (eds.), Encyclopedia of Tribology (pp. 801-808). External link
Dmochowski, W. M., Dadouche, A., & Fillon, M. (2013). Finite Difference Method for Fluid-Film Bearings. In Wang, Q. J., & Chung, Y.-W. (eds.), Encyclopedia of Tribology (pp. 1137-1143). External link
Dadouche, A., Fillon, M., & DeCamillo, S. M. (2013). Hydrodynamic Fixed Geometry Thrust Bearings. In Wang, Q. J., & Chung, Y.-W. (eds.), Encyclopedia of Tribology (pp. 1718-1729). External link
Dmochowski, W. M., Dadouche, A., Fillon, M., & DeCamillo, S. M. (2013). Hydrodynamic Tilting-Pad Journal Bearings. In Wang, Q. J., & Chung, Y.-W. (eds.), Encyclopedia of Tribology (pp. 1749-1757). External link
Dadouche, A., DeCamillo, S. M., & Fillon, M. (2013). Hydrodynamic Tilting-Pad Thrust Bearings. In Wang, Q. J., & Chung, Y.-W. (eds.), Encyclopedia of Tribology (pp. 1757-1765). External link
DeCamillo, S. M., Dadouche, A., & Fillon, M. (2013). Journal Bearings in Power Generation. In Wang, Q. J., & Chung, Y.-W. (eds.), Encyclopedia of Tribology (pp. 1877-1888). External link
DeCamillo, S. M., Dadouche, A., & Fillon, M. (2013). Thrust Bearings in Power Generation. In Wang, Q. J., & Chung, Y.-W. (eds.), Encyclopedia of Tribology (pp. 3682-3690). External link
Rezaei, A., & Dadouche, A. (2012). Development of a turbojet engine gearbox test rig for prognostics and health management. Mechanical Systems and Signal Processing, 33, 299-311. External link
Conlon, M. J., Dadouche, A., & Dmochowski, W. M. (2011, June). Comparison of the Steady-State and Dynamic Performance of Two Fixed-Geometry Journal Bearings [Paper]. ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition (TURBO EXPO 2011), Vancouver, BC. External link
Rezaei, A., Dadouche, A., Wickramasinghe, V., & Dmochowski, W. (2011). A Comparison Study Between Acoustic Sensors for Bearing Fault Detection Under Different Speed and Load Using a Variety of Signal Processing Techniques. Tribology Transactions, 54(2), 179-186. External link
Dadouche, A., Conlon, M. J., Dmochowski, W., Koszela, W., Galda, L., & Pawlus, P. (2011, June). Effect of Surface Texturing on the Steady-State Properties and Dynamic Coefficients of a Plain Journal Bearing: Experimental Study [Paper]. ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition (TURBO EXPO 2011), Vancouver, BC. External link
Thomson, J., Zavadil, R., Sahoo, M., Dadouche, A., Dmochowski, W., & Conlon, M. (2010). Development of a Lead-Free Bearing Material for Aerospace Applications. International Journal of Metalcasting, 4(1), 19-30. External link
Conlon, M. J., Dadouche, A., Dmochowski, W. M., Payette, R., Bédard, J.-P., & Liko, B. (2009, June). Experimental Evaluation of Foil Bearing Performance: Steady-State and Dynamic Results [Paper]. ASME Turbo Expo 2009: Power for Land, Sea, and Air (TURBO EXPO 2009), Orlando, Florida. External link
Dadouche, A., Conlon, M. J., Dmochowski, W., Liko, B., & Bedard, J.-P. (2008, June). Experimental Evaluation of Abradable Seal Performance at High Temperature [Paper]. ASME Turbo Expo 2008: Power for Land, Sea, and Air (TURBO EXPO 2008), Berlin, Germany. External link
Dmochowski, W., Dadouche, A., & Fillon, M. (2008). Numerical Study of the Sensitivity of Tilting-Pad Journal Bearing Performance Characteristics to Manufacturing Tolerances: Dynamic Analysis. Tribology Transactions, 51(5), 573-580. External link
Dadouche, A., Rezaei, A., Wickramasinghe, V., Dmochowski, W., Bird, J. W., & Nitzsche, F. (2008). Sensitivity of Air-Coupled Ultrasound and Eddy Current Sensors to Bearing Fault Detection. Tribology Transactions, 51(3), 310-323. External link
Domchowski, W., Dadouche, A., & Fillon, M. (2007, May). Sensitivity of Tilting-Pad Journal Bearing Performance to Manufacturing Tolerances: Dynamic Properties [Paper]. 62nd Annual Meeting of the Society of Tribologists and Lubrication Engineers, Philadelphia, Pennsylvania. Unavailable
Dadouche, A., & Dmochowski, W. (2006, October). On the Effect of Oil Contamination on the Performance of Plain Journal Bearings [Paper]. 5th EDF/LMS Poitiers Workshop, Poitiers, France. Unavailable
Dadouche, A., Fillon, M., & Dmochowski, W. (2006). Performance of a Hydrodynamic Fixed Geometry Thrust Bearing: Comparison between Experimental Data and Numerical Results. Tribology Transactions, 49(3), 419-426. External link
Dadouche, A., Fillon, M., & Bligoud, J. C. (2000). Experiments on thermal effects in a hydrodynamic thrust bearing. Tribology International, 33(3), 167-174. External link
