 | Monter d'un niveau |
Ben Daly, H., Cole, K. C., Nguyen, K. T., & Sanschagrin, B. (2007). Characterization of Molecular Orientation in Injection-Stretch-Blow-Molded Poly(Ethylene Terephthalate) Bottles by Means of External Reflection Infrared Spectroscopy. Journal of Applied Polymer Science, 104(2), 1319-1327. Lien externe
Ben Daly, H., Cole, K. C., Sanschagrin, B., & Nguyen, K. T. (1999). An Experimental technique for the characterization of molecular orientation through the thickness of plastic products. Polymer Engineering and Science, 39(10), 1982-1992. Lien externe
Ben, D. H., Nguyen, K. T., Sanschagrin, B., & Cole, K. C. (1998). The build-up and measurement of molecular orientation, crystalline morphology, and residual stresses in injection molded parts : A review. Journal of injection molding technology, 2(2), 59-85. Non disponible
Ben, D. H., Nguyen, K. T., Cole, K. C., & Sanschagrin, B. (septembre 1998). Determination of the biaxial orientation in injection-blow-moulded bottles [Communication écrite]. International Symposium on Orientation of Polymers: Application to Films and Fibres, Boucherville, Qc. Non disponible
Cole, K. C., Ben Daly, H., Sanschagrin, B., Nguyen, K. T., & Ajji, A. (1999). A New Approach to the Characterization of Molecular Orientation in Uniaxially and Biaxially Oriented Samples of Poly(Ethylene Terephthalate). Polymer, 40(12), 3505-3513. Lien externe
Cole, K. C., Daly, H. B., Sanschagrin, B., Nguyen, K. T., & Ajji, A. (avril 1998). New approach to the characterisation of molecular orientation in uniaxially and biaxially stretched samples of petp [Communication écrite]. Antec '98. Volume II, Atlanta, Ga.. Lien externe
Daly, H. B., Cole, K. C., Ajji, A., Nguyen, K. T., & Sanschagrin, B. (mai 2002). Molecular orientation in injection-blow-molded bottles [Communication écrite]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. Lien externe
Daly, H. B., Sanschagrin, B., Nguyen, K. T., & Cole, K. C. (1999). Effect of polymer properties on the structure of injection-molded parts. Polymer Engineering and Science, 39(9), 1736-1751. Lien externe
Daly, H. B., Cole, K. C., Sanschagrin, B., & Nguyen, K. T. (avril 1997). Determination of molecular orientation in molded samples of PEEK, HDPE and LCP [Communication écrite]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can. Lien externe
Daly, H. B., Cole, K. C., Sanschagrin, B., & Nguyen, K. T. (avril 1997). Experimental technique for the characterization of molecular orientation through the thickness of plastic products [Communication écrite]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can. Lien externe
Harras, B., Cole, K. C., & Vu-Khanh, T. (1996). Optimization of the ultrasonic welding of PEEK-carbon composites. Journal of Reinforced Plastics and Composites, 15(2), 174-182. Lien externe
Harras, B., Cole, K. C., & Vu-Khanh, T. (mai 1995). Optimization of the ultrasonic welding of PEEK-carbon composites [Communication écrite]. ENERCOMP 95: international conference on composite materials and energy, Montréal, Québec. Non disponible
