 | Up a level |
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R. R., & Brochu, M. (2020). High cycle fatigue behavior of hard turned 300 M ultra-high strength steel. International Journal of Fatigue, 131, 12 pages. External link
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R., Songmene, V., & Brochu, M. (2019). Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel. The International Journal of Advanced Manufacturing Technology, 104(1-4), 141-157. External link
Bretin, R., Lévesque, M., Pilvin, P., & Bocher, P. (2020). Neighborhood effect within polycrystalline materials: Elastoplastic micromechanical analysis by cellular automaton and finite element. International Journal of Fatigue, 137, 16 pages. External link
Bretin, R., Lévesque, M., & Bocher, P. (2019). Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 1 - Finite element study of the interaction between grains. International Journal of Solids and Structures, 176-177, 36-48. External link
Bretin, R., Lévesque, M., & Bocher, P. (2019). Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 2 - Cellular Automaton. International Journal of Solids and Structures, 176-177, 49-67. External link
Castro Moreno, A., Tu, F., Lévesque, M., & Bocher, P. (2017, September). Shot peening FEM simulation: A novel approach based on crystal plasticity [Paper]. 13th International Conference on Shot Peening, Montréal, Québec. External link
Delbergue, D., Lévesque, M., & Bocher, P. (2017, September). About the importance of X-ray elastic constant determination in the precise measurement of residual stress profiles [Paper]. 13th International Conference on Shot Peening, Montréal, Québec. External link
Elhadi, A., Bouchoucha, A., Jomaa, W., Zedan, Y., Schmitt, T., & Bocher, P. (2016). Study of surface wear and damage induced by dry sliding of tempered AISI 4140 steel against hardened AISI 1055 steel. Tribology in Industry, 38(4), 475-485. Available
Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). Erratum: On the Effect of the Peening Trajectory in Shot Peen Forming. Finite Elements in Analysis and Design, 74, 111-111. External link
Gariepy, A., Bridier, F., Hoseini, M., Bocher, P., Perron, C., & Lévesque, M. (2013). Experimental and numerical investigation of material heterogeneity in shot peened aluminium alloy AA2024-T351. Surface and Coatings Technology, 219, 15-30. External link
Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). On the effect of the orientation of sheet rolling direction in shot peen forming. Journal of Materials Processing Technology, 213(6), 926-938. External link
Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). On the effect of the peening trajectory in shot peen forming. Finite Elements in Analysis and Design, 69, 48-61. External link
Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2012, June). Finite Element Peen Forming Simulation [Paper]. 13th International Conference on Aluminum Alloys (Icaa13), Pittsburgh, Penn., USA. External link
Gariepy, A., Perron, C., Bocher, P., & Lévesque, M. (2012, June). Finite Element Simulation of Shot Peening: Prediction of Residual Stresses and Surface Roughness [Paper]. 13th International Conference on Aluminum Alloys (Icaa13), Pittsburgh, Penn., USA. External link
Gariepy, A., Cyr, J., Levers, A., Perron, C., Bocher, P., & Lévesque, M. (2012). Potential applications of peen forming finite element modelling. Advances in Engineering Software, 52, 60-71. External link
Herrera-Jimenez, E. J., Vanderesse, N., Bousser, É., Schmitt, T., Bocher, P., Martinu, L., & Sapieha, J.-E. (2021). Fracture mechanism of TiN coatings on Ti-6Al-4V substrates: Role of interfaces and of the residual stress depth profile. Surface and Coatings Technology, 426, 12 pages. External link
Jomaa, W., Gakwaya, A., & Bocher, P. (2019). Modelling of Materials behavior in finite element simulation of machining processes: Identification techniques and challenges. In Markopoulos, A. P., & Davim, J. P. (eds.), Advanced Machining Processes: Innovative Modeling Techniques . External link
Jomaa, W., Songmene, V., & Bocher, P. (2014, November). Experimental and Numerical Investigation on High Speed Machining of aluminums AA6061-T6 and AA7075-T651 [Presentation]. In Journées des Étudiants du Regal (JER 2014), Sherbrooke, Québec. Unavailable
Jomaa, W., Songmene, V., & Bocher, P. (2014, November). Material Behavior Modeling for High Speed Machining Simulation of 6061-T6 and 7075-T651 Aluminum Alloys [Poster]. Journées des Étudiants du Regal (JER 2014), Sherbrooke, Québec. Unavailable
Jomaa, W., Songmene, V., & Bocher, P. (2013, October). Effect of high-speed machining on surface integrity of AA7075-T651 alloy [Paper]. 12th International Aluminum Conference (INALCO 2013), Montréal, Québec. Unavailable
Jomaa, W., Songmene, V., & Bocher, P. (2013, October). Effect of tool/workpiece interaction on the surface integrity of machined AA7075-t651 parts [Poster]. Journées des Étudiants du Regal (JER 2013), Montréal, Québec. Unavailable
Jomaa, W., Songmene, V., & Bocher, P. (2013, October). On residual stress changes after orthogonal machining of induction hardened AISI 4340 steel [Paper]. Materials Science and Technology Conference and Exhibition 2013 (MS&T 2013), Montréal, Québec, Canada. Unavailable
Klotz, T., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Surface characteristics and fatigue behavior of shot peened Inconel 718. International Journal of Fatigue, 110, 10-21. External link
Klotz, T., Delbergue, D., Miao, H. Y., Bocher, P., Lévesque, M., & Brochu, M. (2017, September). Analytical fatigue life prediction of shot peened Inconel 718 [Presentation]. In 13th International Conference on Shot Peening, Montréal, Québec. External link
Miao, H. Y., Lebon, R., Lévesque, M., & Bocher, P. (2014, September). Residual stress measurement correction on shot peened AA2024 by finite element analysis [Paper]. 12th International Conference on Shot Peening, Goslar, Germany. External link
Tabiai, I., Texier, D., Bocher, P., Therriault, D., & Lévesque, M. (2019). In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load. Experimental Mechanics, 60(3), 359-377. External link
