<  Back to the Polytechnique Montréal portal

Items where Author is "Bernier, Fabrice"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | B | D | G
Number of items: 10.

A

Arsenault, A., Charpentier-Pépin, B., Forcier, A., Nassiri, N., Bellemare, J., Lacroix, C., Ménard, D., Sirois, F., Bernier, F., & Lamarre, J.-M. (2023). Large-scale vibrating coil magnetometer for the magnetic characterization of bulk superconductors. Review of Scientific Instruments, 94(8), 085116 (9 pages). External link

B

Bernier, F., Gauthier, M., Plamondon, P., & L'Espérance, G. (2011, May). Copper strengthening of PM steel parts [Paper]. 2011 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2011, San Francisco, CA, United states. Unavailable

Bernier, F., Plamondon, P., Bailon, J.-P., & L'Espérance, G. (2011). Microstructural characterisation of nickel rich areas and their influence on endurance limit of sintered steel. Powder Metallurgy, 54(5), 559-565. External link

Bernier, F. (2009). Étude des propriétés mécaniques statiques et dynamiques de pièces d'acier élaborées par métallurgie des poudres [Ph.D. thesis, École Polytechnique de Montréal]. Available

Bernier, F., Bailon, J.-P., & L'Espérance, G. (2009). Microstructural characterization and mechanical properties of free-machining sintered steel parts containing up to 1 Wt Pct MnS. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 40(10), 2291-2300. External link

Bernier, F., Boilard, P., Bailon, J.-P., & L'Espérance, G. (2005, June). Machinability and dynamic properties of sinter-hardened steel parts [Paper]. 2005 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2005, Montréal, Québec. Unavailable

Bernier, F. (2003). Caractérisation des alliages thermoélectriques et simulation numérique de l'extrusion à chaud [Master's thesis, École Polytechnique de Montréal]. Available

D

Desrosiers, C., Letenneur, M., Bernier, F., Piché, N., Provencher, B., Cheriet, F., Guibault, F., & Brailovski, V. (2024). Automated porosity segmentation in laser powder bed fusion part using computed tomography: a validity study. Journal of Intelligent Manufacturing, 21 pages. External link

Desrosiers, C., Letenneur, M., Bernier, F., Cheriet, F., Brailovski, V., Piché, N., & Guibault, F. (2022, February). Correlative laser confocal microscopy study and multimmodal 2D/3D registration as ground truth for x-ray inspection of internal defects in LPBF manufacturing [Paper]. 11th Conference on Industrial Computed Tomography (ICT 2022), Wels, Austria. External link

G

Giguère, J., Lamarre, J.-M., Bernier, F., Nascimento, A. R. C., Lacroix, C., Ménard, D., & Sirois, F. (2025). Cold Spray Additive Manufacturing of SmCo-Al Permanent Magnets. Journal of Thermal Spray Technology, 9 pages. External link

List generated on: Mon Mar 24 05:56:36 2025 EDT