 | Up a level |
Allard, P., Trudeau, F., Dansereau, J., Prince, F., Labelle, H., & Duhaime, M. (1992, August). Medio-lateral function in a computer-aided-design of a flexible foot prosthesis [Paper]. International Biomedical Engineering Days (IBED 1992), Istanbul, Turkey. External link
André, B., Dansereau, J., & Labelle, H. (1992). Effect of radiographic landmark identification errors on the accuracy of three-dimensional reconstruction of the human spine. Medical & Biological Engineering & Computing, 30(6), 569-575. External link
Archambault, R., Barkov, A., Lakis, A. A., & Irwin, M. (1992, February). Optimizing bearing life while minimizing the risk of failure through improved condition monitoring techniques and data management schemas baser superior discriminants analysis and operational reliability [Paper]. 4th International Machinery Monitoring and Diagnostic Conference, Houston, Texas. Unavailable
Balachandar, R., Robillard, L., & Ramamurthy, A. S. (1992). Some Characteristics of Counter Flowing Wall Jets. Journal of Fluids Engineering, 114(4), 554-558. External link
Bernier, M., & Baliga, B. R. (1992). A 1-D/2-D model and experimental results for a closed-loop thermosyphon with vertical heat transfer sections. [Modèle 1D/2D et résultats expérimentaux pour un thermosiphon à boucle fermée avec des sections verticales de transfert thermique]. International Journal of Heat and Mass Transfer, 35(11), 2969-2982. External link
Bojji, C., Boukhili, R., & Gauvin, R. (1992). Endommagement par chocs répétés de composites unidirectionnels. (Technical Report n° EPM-RT-92-24). Restricted access
Bui-Quoc, T., Gomuc, R., & Biron, A. (1992). Cyclic Stress-Strain Behavior and Low-Cycle Fatigue of Ti 6-4 at 260°C. Journal of Engineering Materials and Technology, 114(4), 390-398. External link
Chaaban, A., Ma, H., & Bazergui, A. (1992). Tube-Tubesheet Joint: A Proposed Equation for the Equivalent Sleeve Diameter Used in the Single-Tube Model. Journal of Pressure Vessel Technology, 114(1), 19-22. Presented at Pressure Vessels and Piping Conference, Nashville, TN, USA. External link
Denault, J., & Vu-Khanh, T. (1992). Crystallization and fiber/matrix interaction during the molding of PEEK/carbon composites. Polymer Composites, 13(5), 361-371. External link
Derenne, M., Payne, J. R., Marchand, L., & Bazergui, A. (1992). Development of Test Procedures For Fire Resistance Qualification of Gaskets. In Nau, B. S. (ed.), Fluid Sealing (pp. 193-207). External link
Dickson, J. I., Shiqiong, L., & Bailon, J.-P. (1992). Microstructural and fractographic aspects of corrosion fatigue. Materials Characterization, 28(3), 327-347. External link
Fang, Z., & Paraschivoiu, I. (1992). Numerical solutions of natural convection in enclosure with boundary condition switching method. Journal of Thermophysics and Heat Transfer, 6(2), 265-272. External link
Hammache, A., & Bilgen, E. (1992). Nuclear Hydrogen Production Based on Sulfuric Acid Decomposition Process. Journal of Energy Resources Technology, 114(3), 227-234. External link
Hasnaoui, M., Bilgen, E., & Vasseur, P. (1992). Natural convection heat transfer in rectangular cavities partially heated from below. Journal of Thermophysics and Heat Transfer, 6(2), 255-264. External link
Hétu, J.-F., & Pelletier, D. (1992). Adaptative remeshing for viscous incompressible flows. AIAA Journal, 30(8), 1986-1992. External link
Hétu, J.-F., & Pelletier, D. (1992). Fast, adaptive finite element scheme for viscous incompressible flows. AIAA Journal, 30(11), 2677-2682. External link
Ilinca, A. (1992, August). Aircraft model for multicriterial analysis in decision making [Paper]. Guidance, Navigation and Control Conference, Hilton Head Island, SC, USA. External link
Ilinca, A., & Basu, B. (1992, June). Prediction of laminar boundary layer using cubic splines [Paper]. 10th Applied Aerodynamics Conference, Palo Alto, CA, USA. External link
Kerachni, A., & Gauvin, R. (1992). Étude expérimentale de la compressibilité des mats pour le moulage par transfert de résine. (Technical Report n° EPM-RT-92-25). Restricted access
Kerachni, A., & Gauvin, R. (1992). Étude expérimentale de la perméabilité planaire des mats pour le moulage par transfert de résine. (Technical Report n° EPM-RT-92-26). Restricted access
Lakis, A. A. (1992). Analysis of contact stresses on cylindrical vessels. (Technical Report n° EPM-RT-92-29). Unavailable
Lakis, A. A. (1992). A hybrid finite element and classical shells theories : advantage and limitations. (Technical Report n° EPM-RT-92-28). Unavailable
Lakis, A. A., & Sinno, M. (1992). Free vibration of axisymmetric and beam-like cylindrical shells, partially filled with liquid. International Journal for Numerical Methods in Engineering, 33(2), 235-268. External link
Lakis, A. A., Archambault, R., & Selmane, A. (1992). Prediction of the response of a cylindrical shell to arbitrary random pressure fields. (Technical Report n° EPM-RT-92). Unavailable
Lakis, A. A., Van Dyke, P., & Ouriche, H. (1992). Dynamic analysis of anisotropic fluid-filled conical shells. Journal of Fluids and Structures, 6(2), 135-162. External link
Lakshminarayana, H. V., Bernard, M., & Bui-Quoc, T. (1992). Finite element study of a penny-shaped crack along the interface in a bi-material cylinder. Engineering Fracture Mechanics, 43(6), 981-991. External link
Lamarre, F., & Paraschivoiu, I. (1992). Efficient panel method for vortex sheet roll-up. Journal of Aircraft, 29(1), 28-33. External link
Lefebvre, L. A., Lefebvre, É., & Le Luel, A. (1992). La gestion de la technologie : un choix ou une nécessité? (Technical Report n° EPM-RT-92-31). Available
Lortie, R., & Pelletier, D. (1992). Comparison between dispersion and plug-flow models for fixed-bed enzyme reactors. AICHE Journal, 38(9), 1477-1480. External link
Ma, H. (1992). A parametric study of tube-to-tubesheet joints [Ph.D. thesis, Polytechnique Montréal]. Available
Major, S.́. (1992). Solution of the 3-D Euler equations using a multigrid method [Master's thesis, Polytechnique Montréal]. Available
Marchand, L., Bazergui, A., & Derenne, M. (1992). Recent Developments In Elevated Temperature Gasket Evaluation. In Nau, B. S. (ed.), Fluid Sealing (pp. 209-223). External link
Marchand, L., Derenne, M., & Bazergui, A. (1992). Weight Loss Correlation for Sheet Gasket Materials. Journal of Pressure Vessel Technology, 114(1), 1-7. External link
Marleau, G., & Hébert, A. (1992). Analysis of Cluster Geometries Using the DP1 Approximation of the J± Technique. Nuclear Science and Engineering, 111(3), 257-270. External link
Mbaye, M., & Bilgen, E. (1992). Natural Convection and Conduction in Porous Wall, Solar Collector Systems Without Vents. Journal of Solar Energy Engineering, 114(1), 40-46. External link
Paraschivoiu, M. (1992, January). Unsteady Euler solution for oscillatory airfoil and oscillating flap [Paper]. 30th Aerospace Sciences Meeting and Exhibit, Reno, NV, USA. External link
Robillard, L., & Vasseur, P. (1992). Quasi‐steady state natural convection in a tilted porous layer. The Canadian Journal of Chemical Engineering, 70(6), 1094-1100. External link
Shirazi-Adl, A. (1992). Finite Element Stress Analysis of a Push-Out Test Part 1: Fixed Interface Using Stress Compatible Elements. Journal of Biomechanical Engineering, 114(1), 111-118. External link
Shirazi-Adl, A., & Forcione, A. (1992). Finite Element Stress Analysis of a Push-Out Test Part II: Free Interface With Nonlinear Friction Properties. Journal of Biomechanical Engineering, 114(2), 155-161. External link
Teyssedou, A., Tapucu, A., & Camarero, R. (1992). Blocked Flow Subchannel Simulation Comparison With Single-Phase Flow Data. Journal of Fluids Engineering, 114(2), 205-213. External link
Tram, P. (1992). Viscous-inviscid interaction on wings at low speeds [Master's thesis, Polytechnique Montréal]. Available
Trépanier, J.-Y. (1992). MC3 : algorithms for the modelling and computation of circuit-breaker chambers. (Technical Report n° EPM-RT-92-04). Restricted access
Trépanier, J.-Y., Reggio, M., Paraschivoiu, M., & Camarero, R. (1992, January). Unsteady Euler solutions for arbitrarily moving bodies and boundaries [Paper]. 30th Aerospace Sciences Meeting and Exhibit, Reno, NV, USA. External link
Trochu, F., & Gauvin, R. (1992). Limitations of a Boundary-Fitted Finite Difference Method for the Simulation of the Resin Transfer Molding Process. Journal of Reinforced Plastics and Composites, 11(7), 772-786. External link
Vu-Khanh, T., & Denault, J. (1992). Toughness of Reinforced Ductile Thermoplastics. Journal of Composite Materials, 26(15), 2262-2277. External link
Yahia, L., Rhalmi, S., Newman, N., & Isler, M. (1992). Sensory innervation of human thoracolumbar fascia. Acta Orthopaedica Scandinavica, 63(2), 195-197. External link
Zha, G.-C., & Bilgen, E. (1992, June). Effect of throat contouring on two-dimensional converging-diverging nozzles using URS method [Paper]. 10th Applied Aerodynamics Conference, Palo Alto, CA, USA. External link
Zhang, H., Trépanier, J.-Y., Reggio, M., & Camarero, R. (1992, January). A Navier-Stokes solver for stretched triangular grids [Paper]. 30th Aerospace Sciences Meeting and Exhibit, Reno, NV, USA. External link
Zhang, X., Garon, A., & Camarero, R. (1992). Rotor-stator passage-averaged simulation within a mixed-flow pump. (Technical Report n° EPM-RT-92-06). Available
Zhang, X., Garon, A., & Camarero, R. (1992). Three-dimensional closure of the passage-averaged vorticity-potential formulation. (Technical Report n° EPM-RT-92-05). Available
