Documents publiés en "2021"

A

Abderrafai, Y., Diouf Lewis, A., Pierre, J., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (septembre 2021). 3D printing challenge of high processing temperature composite materials [Résumé]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page). Lien externe

Abderrefai, Y., Farahani, R. D., & Therriault, D. (2021). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible

B

Brzeski, D., Hia, I. L., Chauvette, J.-F., Dermanaki Farahani, R., Piccirelli, N., Ross, A., & Therriault, D. (2021). Design of thermoset composites for high-speed additive manufacturing of lightweight sound absorbing micro-scaffolds. Additive Manufacturing, 47, 13 pages. Lien externe

C

Chauvette, J.-F., Brzeski, D., Hia, I. L., Dermanaki Farahani, R., Piccirelli, N., & Therriault, D. (septembre 2021). High-speed Non-planar Multinozzle Additive Manufacturing of Thermosetting Polymer Composites [Résumé]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page). Lien externe

Chauvette, J.-F., Brzeski, D., Hia, I. L., Farahani, R. D., Piccirelli, N., & Therriault, D. (2021). High-speed multinozzle additive manufacturing and extrusion modeling of large-scale microscaffold networks. Additive Manufacturing, 47, 102294 (11 pages). Disponible

Chauvette, J.-F., Hia, I. L., Farahani, R. D., & Therriault, D. (2021). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible

Costa Baptista, J., Roland-Fotsing, E., Mardjano, J., Therriault, D., & Ross, A. (août 2021). Multilayer treatment for subwavelength and broad absorption [Communication écrite]. 50th International Congress and Exposition on Noise Control Engineering (INTER-NOISE 2021), Washington, DC, USA. Lien externe

D

Dermanaki Farahani, R., Brzeski, D., Hia, I. L., Diouf Lewis, A., Piccirelli, N., & Therriault, D. (septembre 2021). 3D printing of abradable polymer composite materials: Materials formulations and characterization [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Lien externe

Diouf-Lewis, A., Abderrafai, Y., Iervolino, F., Pierre, J., Farahani, R. D., Piccirelli, N., & Therriault, D. (septembre 2021). Fabrication and characterization of fiber-reinforced PEEK thermoplastic 3D printing filaments [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page). Lien externe

F

Farahani, R. D., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible

Farahani, R. D., Lévesque, M., & Therriault, D. (2021). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible

H

Hosseini Rad, S., Yanez Sanchez, S. I., Goffin, A., Schlachter, D., Lennox, M. D., Favis, B. D., Therriault, D., & Tavares, J. R. (septembre 2021). Mechanical improvement of green metallic parts printed by binder-jet 3D printing [Résumé]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page). Lien externe

Hu, S., Lingua, A., Lengaigne, J., Lévesque, M., Therriault, D., Walch, D., & Tabiai, I. (juin 2021). Full Field Measurements Applied To The Experimental Testing Of Structural Parts For The Aerospace Industry [Résumé]. Canadian Society for Mechanical Engineering International Congress, Charlottetown, PE, Canada. Lien externe

L

Lampron, O., Therriault, D., & Lévesque, M. (2021). An efficient and robust monolithic approach to phase-field quasi-static brittle fracture using a modified Newton method. Computer Methods in Applied Mechanics and Engineering, 386, 24 pages. Lien externe

Lassus, A., Gancheva, T. P., Therriault, D., Potvin, M.-J., Favis, B. D., & Virgilio, N. (septembre 2021). High-Performance Thermoplastic Hybrid Systems for the Lunar Environment [Résumé]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page). Lien externe

Latko-Durałek, P., Santonja Soto, F., & Therriault, D. (septembre 2021). A safe green ink for solvent-cast 3D printing [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Lien externe

Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (septembre 2021). In-situ full-field measurements for additively manufactured polymers undergoing delamination [Résumé]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page). Lien externe

Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (septembre 2021). Microscale full-field measurements for additively manufactured composites undergoing interlayer delamination [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Non disponible

P

Piccirelli, N., Therriault, D., Otero Navas, I., Diouf Leiws, A., Iervolino, F., & Abderrafai, Y. (2021). Composition for additive manufacturing. [Composition pour fabrication additive]. (Demande de brevet no CA3078975). Lien externe

Pierre, J., Iervolino, F., Chauvette, J.-F., Piccirelli, N., & Therriault, D. (septembre 2021). Additive manufacturing of composite sandwich panels for acoustic applications [Communication écrite]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Canada. Lien externe

Pierre, J., Iervolino, F., Chauvette, J.-F., Piccirelli, N., & Therriault, D. (septembre 2021). Additive manufacturing of polymer composite sandwich panels for acoustic applications [Résumé]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page). Lien externe

Pierre, J., Verville, M., Farahani, R. D., & Therriault, D. (2021). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible

R

Rafiee, M., Granier, F., & Therriault, D. (2021). Advances in coaxial additive manufacturing and applications. Advanced Materials Technologies, 6(11), 2100356. Disponible

S

Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2021). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible

Sosa-Rey, F., Piccirelli, N., Therriault, D., & Lévesque, M. (septembre 2021). Segmentation tool for the extraction of individual fibers from micro-tomographs of additively manufactured reinforced polymer composites [Communication écrite]. International Materials, Applications and Technology (IMAT) 2021, St. Louis, MO, US. Non disponible

T

Therriault, D. (septembre 2021). Additive manufacturing of multifunctional and multimaterial composite structures [Résumé]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page). Lien externe

Therriault, D., & Farahani, R. D. (novembre 2021). Design of multifunctional composites and their advanced additive manufacturing [Communication écrite]. Additive Fabrication of Composites (ADDFABCONF 2021). Lien externe

Toloup, C., Trofimov, A., Lévesque, M., & Therriault, D. (2021). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible

Trofimov, A., Le-Pavic, J., Ravey, C., Albouy, W., Therriault, D., & Lévesque, M. (2021). Multi-scale modeling of distortion in the non-flat 3D woven composite part manufactured using resin transfer molding. Composites Part A: Applied Science and Manufacturing, 140, 106145 (19 pages). Disponible

Trofimov, A., Le-Pavic, J., Therriault, D., & Lévesque, M. (2021). An efficient multi-scale computation of the macroscopic coefficient of thermal expansion: Application to the resin transfer molding manufactured 3D woven composites. International Journal of Solids and Structures, 210-211, 162-169. Disponible

Trofimov, A., Lévesque, M., & Therriault, D. (2021). Supplementary Objective 2: Simulation of additively manufactured composites. (Rapport technique). Non disponible

Y

Yanez Sanchez, S. I., Goffin, A., Schlachter, D., Hosseini Rad, S., Lennox, M. D., Favis, B. D., Therriault, D., & Tavares, J. R. (septembre 2021). Method for Evaluating Binder Performance for Three-Dimensional Printing [Résumé]. 36th Annual Meeting of Polymer Processing Society (PPS-36), Montreal, Qc, Canada (1 page). Lien externe

Yanez-Sanchez, S. I., Lennox, M. D., Therriault, D., Favis, B. D., & Tavares, J. R. (2021). Model approach for binder selection in binder jetting. Industrial & Engineering Chemistry Research, 60(42), 15162-15173. Disponible

Yazdani Sarvestani, H., Akbarzadeh, A. H., Therriault, D., & Lévesque, M. (2021). Engineered bi-material lattices with thermo-mechanical programmability. Composite Structures, 263, 113705 (13 pages). Lien externe

Z

Zou, S., Therriault, D., & Gosselin, F. (septembre 2021). Spider-web-inspired transparent impact-resistant composite [Résumé]. 36th International Conference of the Polymer Processing Society (PPS36), Montreal, Qc, Canada (1 page). Lien externe

Zou, S., Therriault, D., & Gosselin, F. (2021). Toughening elastomers via microstructured thermoplastic fibers with sacrificial bonds and hidden lengths. Extreme Mechanics Letters, 43, 101208 (9 pages). Disponible