Documents publiés en "2019"

A

Absi, C., Assi, P., Bureau, A., Cameron, E., Dimas, E., Dupont, S., & Laberge Lebel, L. (août 2019). Carbon fiber/PEEK rivets for fastening composites structures [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia. Lien externe

Absi, C., Assi, P., Bureau, A., Cameron, E., Dimas, E., Dupont, S., & Laberge Lebel, L. (mai 2019). Joining Composite Using Carbon Fiber/PEEK Rivets [Présentation]. Dans 5th CASI Aerospace Manufacturing Technologies Symposium, Laval, Québec. Non disponible

Alsinani, N., & Laberge Lebel, L. (septembre 2019). Thermoplastic pultrusion's cooling temperature effects on pulling forces and deconsolidation [Communication écrite]. 19th Annual SPE Automotive Composites Conference & Exhibition (ACCE 2019), Novi, Michigan (10 pages). Non disponible

B

Belanger, M.-C., Forcier, P., Gendreau, Y., Bujold, A., Pesant, S., Page, S., & Laberge Lebel, L. (septembre 2019). Effect of tailored fiber placement threads on carbon/epoxy composite impact resistance [Communication écrite]. 6th Annual Composites and Advanced Materials Expo (CAMX 2019), Anaheim, CA, USA. Lien externe

Burgarella, B., & Laberge Lebel, L. (juillet 2019). Multi-scale finite element analysis of braids and bundles of filaments using embedded elements [Présentation]. Dans 11th Canadian-International Conference on Composites, Kelona, Colombie-Britannique. Non disponible

C

Chávez Gómez, P., Pelzmann, T., Langot, J., Robert, É., & Laberge Lebel, L. (août 2019). Fuel effect on the tensile strength evolution of carbon fibers under direct flame attack [Affiche]. 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia. Lien externe

Chávez, P., Pelzmann, T., Robert, É., & Laberge Lebel, L. (janvier 2019). Evaluation of the fire resistance of protected carbon/epoxy laminates in small-scale experiments [Communication écrite]. AIAA Scitech Forum, San Diego, California. Lien externe

G

Ghaedsharaf, M., & Laberge Lebel, L. (avril 2019). The effect of braid angle on the void content and fiber misorientation of thermoplastic Diamond, Regular and Hercules braided rod manufacturing using braid-trusion [Présentation]. Dans 4th International Symposium on Automated Composites Manufacturing, Montréal, Québec. Non disponible

Ghaedsharaf, M., & Laberge Lebel, L. (mai 2019). The effect of braid pattern on the pulling force of thermoplastic braid-trusion [Présentation]. Dans 5th CASI Aerospace Manufacturing Technologies Symposium, Laval, Québec. Non disponible

Gondran, M., Laberge Lebel, L., & Khameneifar, F. (décembre 2019). Development of an iterative braiding model with angle control and thickness measurement [Affiche]. Colloque Annuel du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance CREPEC, Québec, Québec. Non disponible

L

Laberge Lebel, L., Dragutescu, M., Trudeau, P., Normandin, G., & Rifay, M. (2019). Device and method for positioning a ply of material of a composite component along an arcuate surface. (Demande de brevet no US20190329507). Lien externe

Lapointe, F., & Laberge Lebel, L. (2019). Fiber damage and impregnation during multi-die vacuum assisted pultrusion of carbon/PEEK hybrid yarns. Polymer Composites, 40(S2), E1015-E1028. Lien externe

Lessard, F., Boanta, C., Dubé, M., Laberge Lebel, L., & Robert, É. (août 2019). Impact of cellulose filaments on interlaminar properties, flammability and thermal degradation behavior of polymer matrix composites [Affiche]. 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia. Lien externe

R

Rohart, V., Dubé, M., & Laberge Lebel, L. (août 2019). Improvement of the lap shear strength of resistance-welded thermoplastic composite joints using a silane sol-gel coating on the stainless-steel heating element [Présentation]. Dans 22nd International Conference on Composite Materials (ICCM 2019), Melbourne, Australia. Lien externe

Rohart, V., Dubé, M., & Laberge Lebel, L. (2019). Lap shear strength effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints. SAMPE Journal, 55(3), 30-37. Non disponible

X

Xu, C., Quinn, B., Laberge Lebel, L., Therriault, D., & L'Espérance, G. (2019). Multi-Material Direct Ink Writing (DIW) for Complex 3D Metallic Structures with Removable Supports. ACS Applied Materials and Interfaces, 11(8), 8499-8506. Lien externe

Xu, C., Therriault, D., Laberge Lebel, L., L'Espérance, G., & Bouchemit, A. (2019). 3D printing of metallic inks and subsequent heat-treatments. (Demande de brevet no US20190054536). Lien externe