Documents publiés en "2014"

C

Crochon, T., & Lévesque, M. (mai 2014). Time-temperature behaviour of MVK-10 matrix [Communication écrite]. 9th International Conference on Mechanics of Time-Dependent Materials, Montréal, Québec. Non disponible

E

El-Mourid, A., Ganesan, R., & Lévesque, M. (mai 2014). Ageing influence on the failure of textile composites at elevated temperatures [Présentation]. Dans 9th International Conference on Mechanics of Time-Dependent Materials, Montréal, Québec. Non disponible

G

Gariépy, A., Miao, H. Y., & Lévesque, M. (2014). Peen forming. Dans Hashmi, S. (édit.), Comprehensive Materials Processing. Volume 3, Advanced Forming Technologies (295-329). Lien externe

Ghossein, E., & Lévesque, M. (2014). A comprehensive validation of analytical homogenization models: The case of ellipsoidal particles reinforced composites. Mechanics of Materials, 75, 135-150. Lien externe

Guérin, N., Lévesque, M., & Therriault, D. (2014). Helical dielectrophoretic particle separator fabricated by conformal spindle printing. Journal of Biomedical Science and Engineering, 7(9), 641-650. Disponible

L

Lapalme, M., Hoseini, M., Bocher, P., Colle, A. R., & Lévesque, M. (2014). Realistic Cold Expansion Finite Element Model and Experimental Validations for Aluminium Alloys. Experimental Mechanics, 54(5), 841-855. Lien externe

Lévesque, M., Miao, H. Y., Gariepy, A., & Levers, A. (septembre 2014). Prediction of shot peen forming through direct finite element simulation [Communication écrite]. 12th International Conference on Shot Peening, Goslar, Germany. Lien externe

M

Miao, H. Y., Lebon, R., Lévesque, M., & Bocher, P. (septembre 2014). Residual stress measurement correction on shot peened AA2024 by finite element analysis [Communication écrite]. 12th International Conference on Shot Peening, Goslar, Germany. Lien externe

Mortazavi, F., Ghossein, E., Lévesque, M., & Villemure, I. (2014). High resolution measurement of internal full-field displacements and strains using global spectral digital volume correlation. Optics and Lasers in Engineering, 55, 44-52. Lien externe

P

Pahlavanpour, M., Hubert, P., & Lévesque, M. (2014). Numerical and Analytical Modeling of the Stiffness of Polymer-Clay Nanocomposites With Aligned Particles: One- and Two-Step Methods. Computational Materials Science, 82, 122-130. Lien externe

R

Rahmani, B., Ghossein, E., Villemure, I., & Lévesque, M. (2014). In-situ mechanical properties identification of 3D particulate composites using the Virtual Fields Method. International Journal of Solids and Structures, 51(18), 3076-3086. Lien externe

Rahmani, B., Villemure, I., & Lévesque, M. (2014). Regularized virtual fields method for mechanical properties identification of composite materials. Computer Methods in Applied Mechanics and Engineering, 278, 543-566. Lien externe

T

Tajeddini, V., Lin, C.-H., Muliana, A., & Lévesque, M. (2014). Average electro-mechanical properties and responses of active composites. Computational Materials Science, 82, 405-414. Lien externe

Trudel, A., Lévesque, M., & Brochu, M. (2014). Microstructural effects on the fatigue crack growth resistance of a stainless steel CA6NM weld. Engineering Fracture Mechanics, 115, 60-72. Lien externe

Trudel, A., Sabourin, M., Lévesque, M., & Brochu, M. (2014). Fatigue crack growth in the heat affected zone of a hydraulic turbine runner weld. International Journal of Fatigue, 66, 39-46. Lien externe