Documents publiés en "2013"

A

Amini, S., Mortazavi, F., Sun, J., Lévesque, M., Hoemann, C. D., & Villemure, I. (2013). Stress relaxation of swine growth plate in semi-confined compression: Depth dependent tissue deformational behavior versus extracellular matrix composition and collagen fiber organization. Biomechanics and Modeling in Mechanobiology, 12(1), 67-78. Lien externe

C

Chatel, T., Lévesque, M., & Therriault, D. (mai 2013). Influence of fiber orientation on the out-of-plane viscoelastic response of laminated composites used in satellite applications [Communication écrite]. 9th International conference on mechanics of time-dependent materials, Montréal, Québec. Non disponible

Crochon, T., Dulong, S., Li, C., & Lévesque, M. (juillet 2013). Time-temperature behavior of a thermo-setting polymer matrix [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

D

Dulong, S., Lévesque, M., Li, C., & Vadean, A. (juillet 2013). Experimental investigation of physical aging effect of the mechanical properties of a carbon/polyimide braided composite [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

E

El Mourid, A., Ganesan, R., & Lévesque, M. (2013). Comparison between analytical and numerical predictions for the linearly viscoelastic behavior of textile composites. Mechanics of Materials, 58, 69-83. Lien externe

El Mourid, A., Ganesan, R., & Lévesque, M. (juillet 2013). Time and temperature influence on the failure of textile composites [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

F

Favre, A., Fotsing, E. R., Ruiz, E., & Lévesque, M. (juillet 2013). Underwater accelerated aging of elastomeric composite materials [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

G

Gariepy, A., Bridier, F., Hoseini, M., Bocher, P., Perron, C., & Lévesque, M. (2013). Experimental and numerical investigation of material heterogeneity in shot peened aluminium alloy AA2024-T351. Surface and Coatings Technology, 219, 15-30. Lien externe

Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). Erratum: On the Effect of the Peening Trajectory in Shot Peen Forming. Finite Elements in Analysis and Design, 74, 111-111. Lien externe

Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). On the effect of the orientation of sheet rolling direction in shot peen forming. Journal of Materials Processing Technology, 213(6), 926-938. Lien externe

Gariepy, A., Larose, S., Perron, C., Bocher, P., & Lévesque, M. (2013). On the effect of the peening trajectory in shot peen forming. Finite Elements in Analysis and Design, 69, 48-61. Lien externe

Ghossein, E., & Lévesque, M. (juillet 2013). Numerical validation of homogenization models for the case of ellipsoidal particles reinforced composites [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Ghossein, E., & Lévesque, M. (2013). Random Generation of Periodic Hard Ellipsoids Based on Molecular Dynamics: a Computationally-Efficient Algorithm. Journal of Computational Physics, 253, 471-490. Lien externe

Guerin, N., Lévesque, M., & Therriault, D. (mai 2013). Dual helix dielectrophoretic cell separator fabricated using the direct-write spindle deposition technique [Communication écrite]. Nanotechnology 2013: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013, Washington, DC, United states. Lien externe

L

Luk-Cyr, J., Crochon, T., Li, C., & Lévesque, M. (2013). Interconversion of linearly viscoelastic material functions expressed as Prony series: A closure. Mechanics of Time-Dependent Materials, 17(1), 53-82. Lien externe

M

Miao, H. Y., Gariepy, A., & Lévesque, M. (2013). Peen forming simulation of an A320 bottom wing skin panel #1. (Rapport technique). Non disponible

Montesano, J., Fawaz, Z., Lévesque, M., & Poon, C. J. (juillet 2013). Predicting fatigue damage development for braided carbon fiber polymer matrix composites [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Mortazavi, F., Canal, L. P., Gonzalez, C., Llorca, J., Villemure, I., & Lévesque, M. (mai 2013). Fullfield micro-strain measurements in composites by a hybrid spectral approach [Communication écrite]. Photomechanics, Montpellier, France. Non disponible

Mortazavi, F., Ghossein, E., Lévesque, M., & Villemure, I. (juillet 2013). 3D full-field displacements/strains measurements in composites at micro-scale [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Non disponible

Mortazavi, F., Ghossein, E., Lévesque, M., & Villemure, I. (juillet 2013). High resolution measurement of internal full-field displacements and strains using global spectral digital volume correlation [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Mortazavi, F., Lévesque, M., & Villemure, I. (2013). Image-based continuous displacement measurements using an improved spectral approach. Strain, 49(3), 233-248. Lien externe

Moussaddy, H., Therriault, D., & Lévesque, M. (2013). Assessment of existing and introduction of a new and robust efficient definition of the representative volume element. International Journal of Solids and Structures, 50(24), 3817-3828. Disponible

Moussaddy, H., Therriault, D., & Lévesque, M. (juillet 2013). Modeling elastic properties of randomly oriented fiber composites [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

P

Pahlavanpour, M., Hubert, P., & Lévesque, M. (juillet 2013). Homogenization models for Polymer-Clay nanocomposites : one- and two-step approaches [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Pahlavanpour, M., Moussaddy, H., Ghossein, E., Hubert, P., & Lévesque, M. (2013). Prediction of elastic properties in polymer-clay nanocomposites: Analytical homogenization methods and 3D finite element modeling. Computational Materials Science, 79, 206-215. Lien externe

R

Rahmani, B., Ghossein, E., Villemure, I., & Lévesque, M. (septembre 2013). Mechanical Properties Identification of Particulate Composites Constitutive Materials using Virtual Fields Method [Communication écrite]. 28th Annual Technical Conference of the American Society for Composites (ASC 2013), State College, PA, United states. Lien externe

Rahmani, B., Mortazavi, F., Villemure, I., & Lévesque, M. (2013). A new approach to inverse identification of mechanical properties of composite materials: Regularized model updating. Composite Structures, 105, 1160-125. Lien externe

Rahmani, B., Villemure, I., & Lévesque, M. (mai 2013). A new regularized model updating approach for accurate mechanical properties identification of composite materials [Communication écrite]. Photomechanics, Montpellier, France. Non disponible

Rahmani, B., Villemure, I., & Lévesque, M. (juillet 2013). A new regularized virtual fields method for composite material parameters identification [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

T

Trudel, A., Lévesque, M., & Brochu, M. (juin 2013). Residual stress effects on the propagation of fatigue cracks in the weld of a CA6NM stainless steel [Communication écrite]. 13th International Conference on Fracture, Beijing, China (10 pages). Non disponible