 | Monter d'un niveau |
Amini, S., Mortazavi, F., Sun, J., Lévesque, M., Hoemann, C. D., & Villemure, I. (mai 2011). The biomechanical behavior of the growth plate under compression is related to its collagen content and organization [Communication écrite]. 17th Annual Canadian Connective Tissue Conference, Montréal, Québec. Non disponible
Bui-Quoc, T., Julien, D., & Lévesque, M. (2011). Étude du comportement en fatigue propagation de l'acier A-514 a l'air ambiant. (Rapport technique). Non disponible
Crochon, T., Li, C., & Lévesque, M. (septembre 2011). Finite-Element implementation of Schapery-type constitutive theories based on an internal variables approach [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M., & Therriault, D. (novembre 2010). Microstructural and mechanical properties of polyester/nanoclay nanocomposites: Microstructure-mixing strategy correlation [Communication écrite]. MRS Fall Meeting, Boston, MA. Publié dans MRS Proceedings, 1312. Lien externe
El Mourid, A., Ganesan, R., & Lévesque, M. (septembre 2011). Modeling of the linearly viscoelastic behavior of a braided composite [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
El Mourid, A., Ganesan, R., & Lévesque, M. (juin 2011). Prédiction du comportement viscoélastique de matériaux composites textiles par une approche d'homogénéisation [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe
Farahani, R. D., Dalir, H., Aïssa, B., El Khakani, M. A., Lévesque, M., & Therriault, D. (2011). Micro-infiltration of three-dimensional porous networks with carbon nanotube-based nanocomposite for material design. Composites Part A: Applied Science and Manufacturing, 42(12), 1910-1919. Disponible
Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). UV-assisted directwrite fabrication of microstructures using biotin-grafted single-walled carbon nanotubes/epoxy nanocomposites : mechanical and rheological studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible
Farahani, R. D., Moussaddy, H., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Ultraviolet direct-write fabrication of chemically treated single-walled carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible
Gariépy, A., Larose, S., Perron, C., & Lévesque, M. (mai 2011). Sequence-sensitive peen forming modelling [Communication écrite]. ASME Applied Mechanics and Materials (McMat 2011), Chicago, IL, USA. Non disponible
Gariepy, A., Larose, S., Perron, C., & Lévesque, M. (2011). Shot peening and peen forming finite element modelling-towards a quantitative method. International Journal of Solids and Structures, 48(20), 2859-2877. Lien externe
Ghossein, E., & Lévesque, M. (septembre 2011). A fully automated tool for a comprehensive validation of analytical homogenization models [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Ghossein, E., & Lévesque, M. (juin 2011). Un outil complètement automatisé pour l'évaluation en profondeur des performances des modèles d'homogénéisation [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe
Khan, K. A., Barello, R., Muliana, A. H., & Lévesque, M. (2011). Coupled heat conduction and thermal stress analyses in particulate composites. Mechanics of Materials, 43(10), 608-625. Lien externe
Miao, H. Y., & Lévesque, M. (septembre 2011). Effect of shot peening on the fatigue life and crack propagation prediction with experiments and Navarro-Rios Model [Communication écrite]. 11th International Conference of Shot Peening (ICSP 2011), South Bend, Indiana, USA. Lien externe
Miao, H. Y., & Lévesque, M. (avril 2011). Experimental study and numerical simulation of the stress peen forming process [Communication écrite]. 58th CASI Aeronautics Conference (AERO 2011), Montréal, Québec. Non disponible
Miao, H. Y., & Lévesque, M. (août 2011). Experimental study of shot peening and stress peen forming [Communication écrite]. EPS Montréal International Conference on Advanced Materials and Processing 2011, Montréal, Québec. Non disponible
Miao, H. Y., & Lévesque, M. (avril 2011). Numerical models for the optimization of the fatigue life improvement by the shot peening process [Communication écrite]. 58th CASI Aeronautics Conference (AERO 2011), Montréal, Québec. Non disponible
Miao, H. Y., & Lévesque, M. (septembre 2011). On the potential application of a numerical optimization of fatigue life with DoE and FEM [Communication écrite]. 11th International Conference of Shot Peening (ICSP 2011), South Bend, Indiana, USA. Lien externe
Miao, H. Y., Larose, S., Perron, C., & Lévesque, M. (2011). Numerical simulation of the stress peen forming process and experimental validation. Advances in Engineering Software, 42(11), 963-975. Lien externe
Mortazavi, F., Lévesque, M., & Villemure, I. (juin 2011). Improved spectral approach for continuous displacement measurement from digital images [Communication écrite]. SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Uncasville, Connecticut. Lien externe
Mortazavi, F., Lévesque, M., & Villemure, I. (septembre 2011). On the application of a hybrid spectral approach to the image-based measurement of displacements at micro-scale in composites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Moussaddy, H., Farahani, R. D., El Khakani, M. A., Lévesque, M., & Therriault, D. (septembre 2011). Mechanical properties of chemically-treated carbon nanotube nanocomposite microfibers : experimental and modeling studies [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Moussaddy, H., Lévesque, M., & Therriault, D. (septembre 2011). Comparing finite element and analytical micromechanical modeling of randomly oriented single walled carbon nanotubes reinforced nanocomposites [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Moussaddy, H., Lévesque, M., & Therriault, D. (juin 2011). Évaluation des performances des modèles d'homogénéisation pour des fibres aléatoirement dispersées ayant des rapports de forme élevés [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe
Pahlavanpour, M., Hubert, P., & Lévesque, M. (juin 2011). Modèles d'homogénéisation pour des nanocomposites à base de nanoargiles [Communication écrite]. 17es Journées nationales sur les composites (JNC 2011), Poitiers-Futuroscope, France. Lien externe
Pahlavanpour, M., Hubert, P., & Lévesque, M. (septembre 2011). Multiscale modeling of polymer-clay nanocomposites : interphase and homogenization methods [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
Rahmani, B., Villemure, I., & Lévesque, M. (septembre 2011). Elastic properties identification of planar composite materials based on finite element model updating and a hybrid optimization algorithm [Communication écrite]. 26th Annual Technical Conference of the American Society for Composites/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Lien externe
