 | Monter d'un niveau |
Croteau-Labouly, B., Achim, V., Ruiz, E., & Trochu, F. (août 2007). Combined characterization of permeability and compaction in porous media during vacuum assisted resin infusion [Communication écrite]. 6th Canadian International Composites Conference (CANCOM 2007), Winnipeg, Canada. Non disponible
Croteau-Labouly, B., Achim, V., Ruiz, E., Trochu, F., & Gauvin, R. (octobre 2007). Analysis of permeability and compaction of fibre reinforcement during vacuum assisted resin infusion [Communication écrite]. 8th Seminar on Experimental Techniques and Design in Composite Materials, Costa Rel, Sardaigne, Italie. Non disponible
Demaria, C., Ruiz, E., & Trochu, F. (2007). In-Plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection. Part I: Experimental Results. Polymer Composites, 28(6), 797-811. Lien externe
Demaria, C., Ruiz, E., & Trochu, F. (2007). In-Plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection. Part II: Prediction Model and Numerical Simulations. Polymer Composites, 28(6), 812-827. Lien externe
Leclerc, J.-S., Meunier, P., & Ruiz, E. (juin 2007). Impact of injection pressure on voids formation and on mechanical properties of RTM composites [Communication écrite]. 19th Canadian Materials Science Conference, Hamilton, Ontario. Non disponible
Ortega, I., Billotte, C., & Ruiz, E. (octobre 2007). Thermo-mechanical and rheological characterization of various epoxy-based nanocomposites for high performance composites [Communication écrite]. 4th International Symposium on Polymer Nanocomposites Science and Technology, Boucherville, Québec. Non disponible
Ruiz, E., & Trochu, F. (2007). Coupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part II: non-isothermal Filling and Curing. Science and Engineering of Composite Materials, 14(2), 113-144. Disponible
Ruiz, E., Achim, V., & Trochu, F. (2007). Coupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part I: isothermal flow. Science and Engineering of Composite Materials, 14(2), 85-112. Disponible
Ruiz, E., Ortega, I., Abdellaoui, C., & Trudeau, P. (octobre 2007). Nanosilica-modified carbon/epoxy composites manufacturing and characterization [Communication écrite]. 4th International Symposium on Polymer Nanocomposites Science and Technology, Boucherville, Québec. Non disponible
