Documents publiés en "2004"

B

Bursi, O. S., Caramelli, S., Fabbrocino, G., Pinto, A. V., Salvatore, W., Taucer, F., Tremblay, R., & Zandonini, R. (janvier 2004). Pseudo-dynamic testing of a 3d full-scale high ductile steel-concrete composite MR frame at ELSA of JRC [Communication écrite]. 13th world conference on earthquake engineering, Canadian association for earthquake engineering (CAEE), Vancouver, BC, Canada. Lien externe

F

Filiatrault, A., Kuan, S., & Tremblay, R. (2004). Shake Table Testing of Bookcase - Partition Wall Systems. Canadian Journal of Civil Engineering, 31(4), 664-676. Lien externe

Filiatrault, A., Tremblay, R., & Kuan, S. (2004). Generation of Floor Accelerations for Seismic Testing of Operational and Functional Building Components. Canadian Journal of Civil Engineering, 31(4), 646-663. Lien externe

M

Mitchell, D., Tremblay, R., Karacabeyli, E., Paultre, P., Saatcioglu, M., & Anderson, D. L. (2004). Discussion of: "Seismic force modification factors for the proposed 2005 edition of the National Building Code of Canada". Authors' reply. Canadian Journal of Civil Engineering, 31(2), 393-396. Lien externe

Mitchell, D., Tremblay, R., Karacabeyli, E., Paultre, P., Saatcioglu, M., & Anderson, D. L. (2004). Reply to the Discussion by K.a. Harries on "Seismic Force Modification Factors for the Proposed 2005 Edition of the National Building Code of Canada". Canadian Journal of Civil Engineering, 31(2), 395-396. Lien externe

P

Paultre, P., Proulx, J., Ventura, C., Tremblay, R., Rogers, C., Lamarche, C.-P., & Turek, M. (janvier 2004). Experimental investigation of low-rise steel buildings for efficient seismic design [Communication écrite]. 13th world conference on earthquake engineering, Canadian association for earthquake engineering (CAEE), Vancouver, BC, Canada. Lien externe

Poncet, L., & Tremblay, R. (janvier 2004). Influence of mass irregularity on the seismic design and performance of multi-storey braced steel frames [Communication écrite]. 13th world conference on earthquake engineering, Canadian association for earthquake engineering (CAEE), Vancouver, BC, Canada. Lien externe

R

Rogers, C. A., Tremblay, R., Yang, W., & Martin, E. (janvier 2004). Ductile design of steel roof deck diaphragms for earthquake resistance [Communication écrite]. 13th world conference on earthquake engineering, Canadian association for earthquake engineering (CAEE), Vancouver, BC, Canada. Lien externe

S

Salvatore, W., Braconi, A., Bursi, O. S., & Tremblay, R. (janvier 2004). Modelling of a partial-strength beam-to-column joint for high ductile steel-concrete composite frames [Communication écrite]. 13th world conference on earthquake engineering, Canadian association for earthquake engineering (CAEE), Vancouver, BC, Canada. Lien externe

T

Tirca, L., & Tremblay, R. (janvier 2004). Influence of building height and ground motion type on the seismic behaviour of zipper concentrically braced steel frames [Communication écrite]. 13th world conference on earthquake engineering, Canadian association for earthquake engineering (CAEE), Vancouver, BC, Canada. Lien externe

Tremblay, R. (janvier 2004). New canadian seismic design provisions for steel structures [Communication écrite]. 7th pacific structural steel conference, Long Beach, CA. Non disponible

Tremblay, R., & Merzouq, S. (janvier 2004). Dual buckling restrained braced steel frames for enhanced seismic response [Communication écrite]. Passive control symposium 2004, Japon. Non disponible

Tremblay, R., & Poncet, L. (janvier 2004). Improving the seismic stability of concentrically braced steel frames [Communication écrite]. 2004 SSRC annual technical session & meeting, Structural stability research council, Long Beach, CA. Non disponible

Tremblay, R., Ben Ftima, M., & Sabelli, R. (janvier 2004). An innovative bracing configuration for improved seismic response [Communication écrite]. recent advances and new trends in structural design international colloquium, Timisoara, Romania. Non disponible

Tremblay, R., Martin, E., Yang, W., & Rogers, C. A. (2004). Analysis, Testing and Design of Steel Roof Deck Diaphragms for Ductile Earthquake Resistance. Journal of Earthquake Engineering, 8(5), 775-816. Lien externe

Tremblay, R., Poncet, L., Bolduc, P., Neville, R., & DeVall, R. (janvier 2004). Testing and design of buckling restrained braces for canadian application [Communication écrite]. 13th world conference on earthquake engineering, Canadian association for earthquake engineering (CAEE), Vancouver, BC, Canada. Lien externe