Documents publiés en "1999"

H

Hashemi, A., & Shirazi-Adl, A. (novembre 1999). 3D nonlinear finite element analysis of knee joint implants [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition, Nashville, TN. Publié dans Advances in bioengineering, 43. Lien externe

K

Kasra, M., Grynpas, M. D., & Shirazi-Adl, A. (novembre 1999). Dynamic Response Analyses Of Rabbit Knee Joint [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 1999), Nashville, TN, USA. Lien externe

L

Li, L. P., Buschmann, M. D., & Shirazi-Adl, A. (novembre 1999). Fibril reinforced poroelastic model of articular cartilage including depth dependent material properties [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition, Nashville, TN. Publié dans Advances in bioengineering, 43. Lien externe

Li, L. P., Soulhat, J., Buschmann, M. D., & Shirazi-Adl, A. (1999). Nonlinear Analysis of Cartilage in Unconfined Ramp Compression Using a Fibril Reinforced Poroelastic Model. Clinical Biomechanics, 14(9), 673-682. Lien externe

M

Moglo, K., & Shirazi-Adl, A. (novembre 1999). On a refined finite element model of the knee joint [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition, Nashville, TN. Publié dans Advances in bioengineering, 43. Lien externe

P

Parnianpour, M., & Shirazi-Adl, A. (1999). Quantitative assessment of trunk performance. Dans Karwowski, W., & Marras, W. S. (édit.), Occupational ergonomics handbook : Engineering and Administrative Controls (985-1006). Non disponible

Parnianpour, M., Wang, J. L., Shirazi-Adl, A., Khayatian, B., & Lafferriere, G. (1999). Computational method for simulation of trunk motion : towards a theoretical based quantitative assessment of trunk performance. Biomedical engineering applications, basis & communications, 11(1), 27-38. Non disponible

Patenaude, O., Shirazi-Adl, A., & Dammak, M. (novembre 1999). Experimental and finite element comparison of various joint fixation designs [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition, Nashville, TN. Publié dans Advances in bioengineering, 43. Lien externe

S

Shirazi-Adl, A., & Parnianpour, M. (1999). Effect of Changes in Lordosis on Mechanics of the Lumbar Spine- Lumbar Curvature in Lifting. Journal of spinal disorders, 12(5), 436-447. Lien externe

Shirazi-Adl, A., & Parnianpour, M. (novembre 1999). On an idealized wrapping loading of the human spine [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition, Nashville, TN. Publié dans Advances in bioengineering, 43. Lien externe

Shirazi-Adl, A., Sadouk, S., & Parnianpour, M. (novembre 1999). Effect of pelvic tilt and lordosis on passive-active synergy in lumbar spine under axial compression [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition, Nashville, TN. Publié dans Advances in bioengineering, 43. Lien externe

Soulhat, J., Buschmann, M. D., & Shirazi-Adl, A. (1999). A Fibril-Network-Reinforced Biphasic Model of Cartilage in Unconfined Compression. Journal of Biomechanical Engineering, 121(3), 340-347. Lien externe

W

Wang, J. L., Parnianpour, M., Shirazi-Adl, A., & Engin, A. E. (novembre 1999). Effect of loading rate on the load sharing between passive and active subsystems of spine: a finite element analysis [Communication écrite]. Advances in bioengineering ASME IMECE, Nashville, TN, USA. Lien externe

Wang, J. L., Parnianpour, M., Shirazi-Adl, A., & Engin, A. E. (1999). Rate Effect on Sharing of Passive Lumbar Motion Segment Under Load-Controlled Sagittal Flexion: Viscoelastic Finite Element Analysis. Theoretical and Applied Fracture Mechanics, 32(2), 119-128. Lien externe