 | Monter d'un niveau |
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Kasra, M., Parnianpour, M., Shirazi-Adl, A., Wang, J. L., & Grynpas, M. D. (2004). Effect of strain rate on tensile properties of sheep disc anulus fibrosus. Technology and Health Care, 12(4), 333-342. Lien externe
Parnianpour, M., Wang, J. L., Shirazi-Adl, A., Khayatian, B., & Lafferriere, G. (1999). Computational method for simulation of trunk motion : towards a theoretical based quantitative assessment of trunk performance. Biomedical engineering applications, basis & communications, 11(1), 27-38. Non disponible
Wang, J. L., Parnianpour, M., Shirazi-Adl, A., & Engin, A. E. (1999). Rate Effect on Sharing of Passive Lumbar Motion Segment Under Load-Controlled Sagittal Flexion: Viscoelastic Finite Element Analysis. Theoretical and Applied Fracture Mechanics, 32(2), 119-128. Lien externe
Wang, J. L., Parnianpour, M., Shirazi-Adl, A., & Engin, A. E. (1998). Dynamic Response of L-2/L-3 Motion Segment in Cyclic Axial Compressive Loading. Clinical Biomechanics, 13(1), S16-S25. Lien externe
Wang, J. L., Parnianpour, M., Shirazi-Adl, A., Engin, A. E., Li, S., & Patwardhan, A. (1997). Development and validation of a viscoelastic finite element model of an l2/l3 motion segment. Theoretical and Applied Fracture Mechanics, 28(1), 81-93. Lien externe
Parnianpour, M., Wang, J. L., Shirazi-Adl, A., Sparto, P., & Wilke, H. J. (1997). Effect of variations in trunk models in predicting muscle strength and spinal loading. Journal of Musculoskeletal Research, 1(01), 55-69. Lien externe
Wang, J. L., Parnianpour, M., Shirazi-Adl, A., & Engin, A. E. (1997). Failure criterion of collagen fiber: viscoelastic behavior simulated by using load control data. Theoretical and Applied Fracture Mechanics, 27(1), 1-12. Lien externe
Wang, J. L., Parnianpour, M., Shirazi-Adl, A., & Engin, A. E. (1997). Review and evaluation of viscoelastic models for collagen fiber during constant strain rate loading. Biomedical engineering applications, basis & communications, 27, 1-12. Non disponible
Wang, J. L., Parnianpour, M., Shirazi-Adl, A., & Engin, A. E. (novembre 1999). Effect of loading rate on the load sharing between passive and active subsystems of spine: a finite element analysis [Communication écrite]. Advances in bioengineering ASME IMECE, Nashville, TN, USA. Lien externe
Kasra, M., Parnianpour, M., Wang, J. L., Shirazi-Adl, A., & Grynpas, M. D. (janvier 1998). Mechanical behaviour of the anulus fibrosus under tensile dynamic loading: effect of loading rate [Communication écrite]. Engineering systems design and analysis conference (ESDA), Berlin. Non disponible
Kasra, M., Parnianpour, M., Wang, J. L., Shirazi-Adl, A., & Grynpas, M. D. (novembre 1997). Effect of strain rate on failure behaviour of the annulus fobrosus in tension [Communication écrite]. Advances in bioengineering, ASME WAM, Dallas, Texas, USA. Lien externe
Wang, J. L., Shirazi-Adl, A., Parnianpour, M., & Engin, A. E. (janvier 1996). Development of the viscoelastic finite model of lumbar motion segment [Communication écrite]. Engineering systems design and analysis conference (ESDA), Montpellier, France. Non disponible
Wang, J. L., Shirazi-Adl, A., Parnianpour, M., & Wilke, H. J. (janvier 1996). Dynamic response at creep and relaxation of motion segment L2-L3 by the viscoelastic finite element modelling [Communication écrite]. Engineering systems design and analysis conference (ESDA), Montpellier, France. Non disponible
Wang, J. L., Shirazi-Adl, A., Parnianpour, M., & Engin, A. E. (janvier 1996). Dynamic response of an L2-L3 motion segment to compressive cyclic loading using a nonlinear viscoelastic finite element model [Communication écrite]. Advances in bioengineering ASME WAM, Atlanta. Non disponible
Parnianpour, M., Shirazi-Adl, A., Wang, J. L., Wilke, H. J., & Sparto, P. (janvier 1996). Effects of anatomical models and cost functions used by optimisation models on the predicted spinal load [Communication écrite]. Advances in bioengineering, ASME WAM, Atlanta. Non disponible
Parnianpour, M., Shirazi-Adl, A., Wang, J. L., Khakatian, B., & Lafferriere, G. (janvier 1996). Effects of strength on simulation of the trunk motion [Communication écrite]. Advances in bioengineering, ASME WAM, Atlanta. Non disponible
Parnianpour, M., Shirazi-Adl, A., Wang, J. L., Wilke, H. J., & Sparto, P. (janvier 1996). Novel approach to quantify strength and spinal loading using optimization models [Communication écrite]. Engineering systems design and analysis conference (ESDA), Montpellier, France. Non disponible
Wang, J. L., Shirazi-Adl, A., Engin, A. E., & Parnianpour, M. (janvier 1995). Model study of the effect of rate of loading on the internal stress and strain of an L2-L3 lumbar motion segment [Communication écrite]. Advances in bioengineering ASME WAM, San Francisco. Non disponible
Wang, J. L., Shirazi-Adl, A., Engin, A. E., & Parnianpour, M. (janvier 1995). Viscoelastic model development af annulus fibre for a cumulative trauma model of a low back injury [Communication écrite]. Advances in bioengineering ASME WAM, San Francisco. Non disponible
Wang, J. L., Shirazi-Adl, A., Engin, A. E., & Parnianpour, M. (janvier 1994). Modelling of viscoelastic behaviour of soft tissues - a parametric study of methods based on Prony series and Bailey Norton law [Communication écrite]. Advances in bioengineering ASME WAM, Chicago. Non disponible
Wang, J. L., Engin, A. E., Shirazi-Adl, A., & Parnianpour, M. (janvier 1994). Viscoelastic behavior of disc annulus fibrosus: the response of a quasi-linear viscoelastic model to external loads [Communication écrite]. 2nd ASME European Joint conference on engineering systems design and analysis (ESDA), London. Non disponible
