<  Retour au portail Polytechnique Montréal

Documents dont l'auteur est "Verreman, Yves"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement
Aller à : A | B | C | D | E | F | G | H | L | M | N | P | S | V
Nombre de documents: 63

A

Amrei, M. M., Monajati, H., Thibault, D., Verreman, Y., & Bocher, P. (2016). Effects of Various Post-Weld Heat Treatments on Austenite and Carbide Formation in a 13Cr4Ni Steel Multipass Weld. Metallography, Microstructure, and Analysis, 5(1), 50-61. Lien externe

Amrei, M. M., Monajati, H., Thibault, D., Verreman, Y., Germain, L., & Bocher, P. (2016). Microstructure characterization and hardness distribution of 13Cr4Ni multipass weld metal. Materials Characterization, 111, 128-136. Lien externe

B

Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (2012). Propagation of short fatigue cracks in permanent and semi-solid mold 357 alumiunum alloy. International Journal of Fatigue, 36(1), 120-129. Lien externe

Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (2010). High cycle fatigue strength of permanent mold and rheocast aluminum 357 alloy. International Journal of Fatigue, 32(8), 1233-1242. Lien externe

Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (janvier 2009). Résistance en fatigue de l'alliage A357 moulé en coquille et rhéomoulé [Communication écrite]. Journée du REGAL 2009. Non disponible

Brochu, M., Verreman, Y., Ajersch, F., & Charette, N. (janvier 2008). Défis expérimentaux dans l'étude du comportement en fatigue de l'alliage A357 [Communication écrite]. Journée du REGAL 2008. Non disponible

Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. (juillet 2009). Fatigue testing of a cast aluminum alloy : experimental challenges [Communication écrite]. 12th International Conference on Fracture, Ottawa, Ontario. Non disponible

Brochu, M., Verreman, Y., & Ajersch, F. (2009). La mise en forme dans le domaine semi-solide : des avantages métallurgiques et économiques. Materiaux et techniques, 97(2), 90-93. Lien externe

Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. (septembre 2008). Fatigue behavior of semi-solid cast aluminum: A critical review [Communication écrite]. 10th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2008), Aachen, Germany. Publié dans Solid State Phenomena, 141-143. Lien externe

Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. Fatigue des pièces d'aluminium fabriquées par voie semi-solide [Communication écrite]. Journée du REGAL 2007. Non disponible

Bailon, J.-P., & Verreman, Y. (1992). Caractérisation d'un système antichute - Phase I. (Rapport technique). Non disponible

Bailon, J.-P., & Verreman, Y. (1992). Caractérisation d'un système antichute - Phase II. (Rapport technique). Non disponible

Bailon, J.-P., & Verreman, Y. (1986). Étude de la caractérisation des soudures par la mécanique de la rupture - Phase III. (Rapport technique). Non disponible

Bailon, J.-P., & Verreman, Y. (1984). Étude de la caractérisation des soudures par la mécanique de la rupture - Phase II. (Rapport technique). Non disponible

Bailon, J.-P., & Verreman, Y. (1983). Étude de la caractérisation des soudures par la mécanique de la rupture - Phase I. (Rapport technique). Non disponible

C

Chen, J. Q., Verreman, Y., Besson, J., Madi, Y., & Morgeneyer, T. F. (octobre 2011). Ductile fracture of AA2198 aluminium-lithium-copper alloys used in the aeronautical industry [Communication écrite]. Conférence des Métallurgistes, COM2011, Montréal, Québec. Non disponible

D

Deschênes, P. A., Lanteigne, J., Verreman, Y., Paquet, D., Lévesque, J. B., & Brochu, M. (2017). A new experimental method to study the influence of welding residual stresses on fatigue crack propagation. International Journal of Fatigue, 100, 444-452. Lien externe

E

Edde, F. C., & Verreman, Y. (1995). Nominally constant strain energy release rate specimen for the study of mode II fracture and fatigue in adhesively bonded joints. International Journal of Adhesion and Adhesives, 34(3), 208-216. Lien externe

F

Foroozmehr, F., Verreman, Y., Chen, J., Thibault, D., & Bocher, P. (2017). Effect of inclusions on fracture behavior of cast and wrought 13% Cr-4% Ni martensitic stainless steels. Engineering Fracture Mechanics, 175, 262-278. Lien externe

G

Ghafoori-Ahangar, R., & Verreman, Y. (2019). Fatigue behavior of load-carrying cruciform joints with partial penetration fillet welds under three-point bending. Engineering Fracture Mechanics, 215, 211-223. Lien externe

Ghafoori Ahangar, R., & Verreman, Y. (2018). Assessment of Mode I and Mode II Stress Intensity Factors Obtained by Displacement Extrapolation and Interaction Integral Methods. Journal of Failure Analysis and Prevention, 19(1), 85-97. Lien externe

Gemme, F., Verreman, Y., Dubourg, L., & Wanjara, P. (2011). Effect of welding parameters on microstructure and mechanical properties of AA7075-T6 friction stir welded joints. Fatigue and Fracture of Engineering Materials and Structures, 34(11), 877-886. Lien externe

Gemme, F., Verreman, Y., Dubourg, L., & Jahazi, M. (2010). Numerical analysis of the dwell phase in friction stir welding and comparison with experimental data. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, 527(16-17), 4152-4160. Lien externe

Gemme, F., Verreman, Y., & Dubourg, L. (janvier 2009). Résistance en fatigue de joints d'aluminium 7075-T6 soudés par frottement-malaxage [Communication écrite]. Journée du REGAL 2009. Non disponible

Gemme, F., Verreman, Y., Jahazi, M., & Dubourg, L. (janvier 2008). Étude expérimentale et numérique de l'histoire thermo-mécanique du soudage par friction-malaxage [Communication écrite]. Journée du REGAL 2008. Non disponible

Gemme, F., Verreman, Y., Jahazi, M., & Dubourg, L. (janvier 2008). Friction stri welding of 7075 aluminium alloy : finite element modelling of the dwell phase [Communication écrite]. International Symposium on Aerospace Materials and Manufacturing. Non disponible

Guo, H., & Verreman, Y. (janvier 2002). Evaluation of multiaxial fatigue parameters for predicting axial-torsional high cycle fatigue life of ferritic-pearlitic steels [Communication écrite]. Fatigue 2002 EMAS. Non disponible

H

Hassanipour, M., Verreman, Y., & Lanteigne, J. (2017). Fatigue threshold at high stress ratio under periodic underloads in turbine runner steels. International Journal of Fatigue, 103, 264-271. Lien externe

Hassanipour, M., Verreman, Y., Lanteigne, J., & Chen, J. Q. (2016). Effect of periodic underloads on fatigue crack growth in three steels used in hydraulic turbine runners. International Journal of Fatigue, 85, 40-48. Lien externe

L

Limodin, N., & Verreman, Y. (mai 2006). Fatigue strength improvement of 4140 steel by gas nitriding [Communication écrite]. 9th International Fatigue Congress, Atlanta, Georgia, USA. Non disponible

Limodin, N., & Verreman, Y. (2006). Fatigue strength improvement of a 4140 steel by gas nitriding: Influence of notch severity. Materials Science and Engineering. A, Structural Materials Properties Microstructure and Processing, 435-436, 460-7. Lien externe

Limodin, N., Verreman, Y., & Tarfa, T. N. (2003). Axial fatigue of a gas-nitrided quenched and tempered AISI 4140 steel: effect of nitriding depth. Fatigue and Fracture of Engineering Material and Structures, 26(9), 811-820. Lien externe

Limodin, N., Verreman, Y., & Tarfa, N. T. (janvier 2002). Fatigue behavior of a nitrided 1045 steel: competition between two mechanisms [Communication écrite]. Fatigue 2002 EMAS. Non disponible

M

Mokhtabad Amrei, M., Verreman, Y., Bridier, F., Thibault, D., & Bocher, P. (2015). Microstructure Characterization of Single and Multipass 13Cr4Ni Steel Welded Joints. Metallography, Microstructure, and Analysis, 4(3), 207-218. Lien externe

N

Nickoletopoulos, N., Verreman, Y., Hone, M., Wanjara, P., Nemes, J. A., Jonas, J. J., & Yue, S. (janvier 2001). Development of a fracture criterion for cold heading [Communication écrite]. wire and cable technical symposium, 70th annual convention. Non disponible

Nickoletopoulos, N., Verreman, Y., Hone, M., Nemes, J., Jonas, J., & Wanjara, P. (2001). Development of a fracture criterion for cold heading. Wire journal international, 34(9), 90-98. Non disponible

Nickoletopoulos, N., & Verreman, Y. (2001). Validation of the Cockroft and Latham fracture criterion for cold heading of steel fasteners. International journal of forming processes, 4(3-4), 445-462. Lien externe

Nickoletopoulos, N., Verreman, Y., & Hone, M. (janvier 2001). Validation of the Cockroft and Latham fracture criterion for cold heading using drop weight compression testing and finite element modeling [Communication écrite]. 4th international ESAFORM conference on material forming. Non disponible

Nie, B., & Verreman, Y. (janvier 1999). Initiation life prediction model for fatigue cracks at the toe of welded joints [Communication écrite]. Fatigue 1999 EMAS. Non disponible

P

Paquin, M., Thibault, D., Bocher, P., Lévesque, J.-B., Verreman, Y., & Shinozaki, K. (2015). Assessment of cold cracking tests for low transformation temperature martensitic stainless steel multipass welds. Welding in the World, 59(4), 521-532. Lien externe

S

Slamani, F., Thibault, D., Verreman, Y., & Bocher, P. (2022). A new morphology of retained austenite obtained by intercritical tempering of 13Cr-4Ni martensitic stainless steel. Materials Characterization, 193, 19 pages. Lien externe

V

Verreman, Y. (2010). Short crack propagation. Dans Fatigue of materials and structures, fundamentals (269-309). Lien externe

Verreman, Y., & Guo, H. (juillet 2009). Short cracks at notches and fatigue life prediction [Communication écrite]. 12th International Conference on Fracture, Ottawa, Ontario. Non disponible

Verreman, Y. (octobre 2008). Durabilité en fatigue des joints soudés par frottement-malaxage [Communication écrite]. Séminaire industriel du REGAL, Laval, Québec. Non disponible

Verreman, Y., & Limodin, N. (2008). Fatigue Notch Factor and Short Crack Propagation. Engineering Fracture Mechanics, 75(6), 1320-1335. Lien externe

Verreman, Y. (2008). Propagation des fissures courtes. Dans La fatigue des matériaux et des structures. T. 2, Fissures courtes, mécanismes et approche locale, fatigue-corrosion et effet de l'environnement, chargements d'amplitude variable (17-57). Non disponible

Verreman, Y., & Guo, H. (2007). High-Cycle Fatigue Mechanisms in 1045 Steel Under Non-Proportional Axial-Torsional Loading. Fatigue & Fracture of Engineering Materials & Structures, 30(10), 932-946. Lien externe

Verreman, Y., & Limodin, N. (mai 2006). Fatigue life prediction of V-notched components [Communication écrite]. 9th International Fatigue Congress, Atlanta, Georgia, USA. Non disponible

Verreman, Y. (mai 2000). Growth rates and closure development of short fatigue cracks at notches and at weld toes [Communication écrite]. Notch effects in fatigue and fracture, Durres, Albania. Lien externe

Verreman, Y., & Hone, M. (2001). Simulation par éléments finis du forgeage des métaux : application à la frappe à froid de boulons d'acier. Materiaux et techniques, 89(1-2), 37-43. Lien externe

Verreman, Y., Nickoletopoulos, N., & Hone, M. (août 2000). Prediction of fracture in cold-headed steel fasteners by numericalsimulation [Communication écrite]. COM: Conference of Metallurgists 2000, Ottawa, Ontario, Canada. Non disponible

Verreman, Y., Nie, B., & Espinosa, G. (juin 1999). Experimental technique for monitoring the early propagation of fatigue cracks at notches and smooth surfaces [Communication écrite]. Fatigue '99: Seventh International Fatigue Congress, Beijing, China. Non disponible

Verreman, Y., & Espinosa, G. (1997). Comportement des fissures courtes en fatigue. Dans Fatigue des matériaux et des structures (333-362). Lien externe

Verreman, Y., & Espinosa, G. (1997). Mechanically short crack growth from notches in a mild steel. Fatigue and Fracture of Engineering Materials & Structures, 20(2), 129-142. Lien externe

Verreman, Y. (janvier 1997). Short crack fatigue propagation at fillet welds [Communication écrite]. IIW International Conference on Performance of Dynamically Loaded Welded Structures. Non disponible

Verreman, Y., & Nie, B. (1996). Early development of fatigue cracking at manual fillet welds. Fatigue and Fracture of Engineering Materials & Structures, 19(6), 669-681. Lien externe

Verreman, Y. Simulation of metal forming using FORGE 2 [Communication écrite]. Hot Workability Steels Light Alloys-Compos. Non disponible

Verreman, Y. (1994). Monitoring short fatigue cracks with miniature strain gages. Experimental Mechanics, 34(3), 208-216. Lien externe

Verreman, Y., Dickson, J. I., & Bailon, J.-P. (avril 1988). Generalization of the Kitagawa Diagram to V-Notched Members [Communication écrite]. NATO Advanced Studies Institute on Advances in Fatigue and Science and Technology, Alvor, Portugal. Lien externe

Verreman, Y., Bailon, J.-P., & Masounave, J. (juin 1987). Closure and propagation behaviour of short fatigue cracks at difference r-ratio [Communication écrite]. 3rd International Conference on Fatigue and Fatigue Thresholds (FATIGUE 1987), Charlottesville, Virginia. Non disponible

Verreman, Y., Bailon, J.-P., & Masounave, J. (1987). Fatigue lift prediction of welded joints—a re-assessment. Fatigue & Fracture of Engineering Materials & Structures, 10(1), 17-36. Lien externe

Verreman, Y., Bailon, J.-P., & Masounave, J. (1987). Fatigue of V-notched members: Short crack behavior and endurance limit. Engineering Fracture Mechanics, 28(5-6), 773-783. Lien externe

Verreman, Y. (1985). Comportement en fatigue des joints soudés automatiques [Thèse de doctorat, École Polytechnique de Montréal]. Non disponible

Liste produite: Thu Mar 28 04:25:33 2024 EDT.