 | Monter d'un niveau |
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Trofimov, A., Ravey, C., Droz, N., Therriault, D., & Lévesque, M. (2023). A review on the Representative Volume Element-based multi-scale simulation of 3D woven high performance thermoset composites manufactured using resin transfer molding process. Composites Part A: Applied Science and Manufacturing, 169, 107499 (17 pages). Accès restreint
Trofimov, A., Tuloup, C., Le Pavic, J., Ravey, C., Therriault, D., & Lévesque, M. (2023). Multi-scale modeling of process-induced pressure distribution inside 3D woven composites manufactured using Resin Transfer Molding. Composites Part a-Applied Science and Manufacturing, 165, 107307 (15 pages). Lien externe
Trofimov, A., Le Pavic, J., Pautard, S., Therriault, D., & Lévesque, M. (2022). Experimentally validated modeling of the temperature distribution and the distortion during the Fused Filament Fabrication process. Additive Manufacturing, 54, 102693 (17 pages). Disponible
Serrano-Munoz, I., Fritsch, T., Mishurova, T., Trofimov, A., Apel, D., Ulbricht, A., Kromm, A., Hesse, R., Evans, A., & Bruno, G. (2021). On the interplay of microstructure and residual stress in LPBF IN718. Journal of Materials Science, 56(9), 5845-5867. Disponible
Trofimov, A., Le-Pavic, J., Therriault, D., & Lévesque, M. (2021). An efficient multi-scale computation of the macroscopic coefficient of thermal expansion: Application to the resin transfer molding manufactured 3D woven composites. International Journal of Solids and Structures, 210-211, 162-169. Disponible
Trofimov, A., Le-Pavic, J., Ravey, C., Albouy, W., Therriault, D., & Lévesque, M. (2021). Multi-scale modeling of distortion in the non-flat 3D woven composite part manufactured using resin transfer molding. Composites Part A: Applied Science and Manufacturing, 140, 106145 (19 pages). Disponible
Markov, A., Trofimov, A., & Sevostianov, I. (2020). Effect of non-planar cracks with islands of contact on the elastic properties of materials. International Journal of Solids and Structures, 191, 307-314. Lien externe
Trofimov, A., Markov, A., & Sevostianov, I. (2020). Replacement relations for elastic composite materials having different matrices and related problems. Acta Mechanica, 231(6), 2335-2350. Lien externe
Markov, A., Trofimov, A., & Sevostianov, I. (2020). A unified methodology for calculation of compliance and stiffness contribution tensors of inhomogeneities of arbitrary 2D and 3D shapes embedded in isotropic matrix open access software. International Journal of Engineering Science, 157, 15 pages. Lien externe
Giraud, A., Sevostianov, I., Kushch, V. I., Cosenza, P., Pret, D., Barthélémy, J. F., & Trofimov, A. (2019). Effective electrical conductivity of transversely isotropic rocks with arbitrarily oriented ellipsoidal inclusions. Mechanics of Materials, 133, 174-192. Lien externe
Lebedev, O. V., Trofimov, A., Abaimov, S. G., & Ozerin, A. N. (2019). Modeling of an effect of uniaxial deformation on electrical conductance of polypropylene-based composites filled with agglomerated nanoparticles. International Journal of Engineering Science, 144, 14 pages. Lien externe
Lebedev, O. V., Ozerin, A. N., Kurkin, T., & Trofimov, A. (septembre 2021). Multi-Scale Modeling of Uniaxial Deformation of Electroconductive Polypropylene/Nanoparticles Composites Reinforced with Woven Glass Fiber [Communication écrite]. 36th International Conference of the Polymer-Processing-Society (PPS 2021), Montréal, QC. Lien externe
Trofimov, A., Markov, A., & Sevostianov, I. (avril 2021). A unified methodology for computation of compliance and stiffness contribution tensors of inhomogeneities of arbitrary 2D and 3D shapes-open access software [Communication écrite]. International Workshop Engineered Materials for Sustainable Structures (EM4SS 2021). Lien externe
