 | Monter d'un niveau |
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Tremblay, R., & Rogers, C. (2005). Impact of capacity design provisions and period limitations on the seismic design of low-rise steel buildings. International Journal of Steel Structures, 5(1), 1-22. Non disponible
Rahal, A., Boch, E., Rogers, C., Ovey, J., & Bosisio, R. (1995). Planar multi-stack quantum barrier varactor tripler evaluation at W-band. Electronics Letters, 31(23), 2022-2023. Lien externe
Rahal, A., Bosisio, R., Rogers, C., Ovey, J., Sawan, M., & Missous, M. (1995). W-band medium power multi-stack quantum barrier varactor frequency tripler. IEEE Microwave and Guided Wave Letters, 5(11), 368-370. Lien externe
Nedisan, C., Tremblay, R., & Rogers, C. (2001). Seismic design of single-storey steel structures - comparative study of base shears: NBC1995 vs NBC2004. (Rapport technique). Non disponible
Tremblay, R., Degrange, G., & Rogers, C. (2001). Shear bond resistance of the canam P-3606 and P-3623 composite floor deck systems. (Rapport technique n° 01-05). Non disponible
Tremblay, R., Rogers, C., & Degrange, G. (2000). Evaluation of the shear bond resistances of the canam P3615 composite floor deck system. (Rapport technique n° EPM-GCS-2000-16). Non disponible
Rogers, C., & Tremblay, R. (2000). Inelastic seismic response of frame and sidelap fasteners for steel roof decks. (Rapport technique n° 00-09). Non disponible
Tremblay, R., & Rogers, C. (1999). Reconnaissance report on the september 21, 1999 Chi-Chi (Taiwan) earthquake. (Rapport technique). Non disponible
Moreau, R., Rogers, C., & Tremblay, R. (mai 2013). Experimental testing of conventional HSS slotted tube-to-gusset plate connections loaded under static and dynamic strain rates [Communication écrite]. Canadian Society for Civil Engineering, CSCE 2013. Annual Conference, Montréal, Québec. Lien externe
Tremblay, R., Rogers, C., Lamarche, C.-P., Nedisan, C., Franquet, J., Masarelli, R., & Shrestha, K. (octobre 2008). Dynamic seismic testing of large size steel deck diaphragm low-rise building applications [Communication écrite]. 14th World Conference on Earthquake Engineering (WCEE), Beijing, China. Lien externe
Rogers, C., & Tremblay, R. Impact of diaphragm behaviour on the seismic design of low-rise steel buildings [Communication écrite]. North American Steel Construction Conference, Nashville, TN. Lien externe
Tremblay, R., & Rogers, C. Influence of seismic design requirements and building period on the design of low-rise steel buildings [Communication écrite]. 4th International Conference on Advances in Steel Structures, Shanghai, China. Lien externe
Tremblay, R., Velev, N., Merzouq, S., Blais, C., Leclerc, M., Léger, P., Massicotte, B., & Rogers, C. Multi-purpose earthquake simulation testing set-up for seismic force resisting systems of multi-storey buildings [Communication écrite]. 1st International conference on Advances in Experimental Structural Engineering, Nagoya, Japan. Non disponible
Tremblay, R., Martin, E., & Rogers, C. (juin 2003). Performance of Steel Roof Deck Diaphragms Under Simulated Earthquake Loading [Communication écrite]. Stessa 2003: Behaviour of Steel Structures in Seismic Areas, Naples, Italy. Lien externe
Tremblay, R., Rogers, C., Essa, H., & Martin, É. (janvier 2002). Dissipating seismic input energy in low-rise steel buildings through inelastic deformations in the metal roof deck diaphragm [Communication écrite]. 4th CSCE structural specialty conference, Montréal, Québec. Non disponible
Essa, H., Tremblay, R., & Rogers, C. (janvier 2002). Inelastic seismic response of metal roof deck diaphragms for steel buildings structures [Communication écrite]. 12th european conference earthquake engineering, London, England. Non disponible
Tremblay, R., Rogers, C., & Nedisan, C. (janvier 2002). Use of uniform hazard spectrum and computed period in the seismic design of single-storey steel structures [Communication écrite]. 7th U.S. national conference on earthquake engineering, Boston, MA. Non disponible
Bond, W. F., Rogers, C., & Tremblay, R. (janvier 2001). Seismic performance of arc-spot weld deck-to-frame connections [Communication écrite]. 3rd International conference on thin Wall Structures, Cracow, Poland. Non disponible
Rogers, C., & Tremblay, R. (janvier 2000). Evaluation of steel roof diaphragm sidelap connections subjected to seismic loading [Communication écrite]. 7th International Symposium on Structural Failure and Plasticity (IMPLAST 2000), Melbourne, Australia. Lien externe
Rogers, C., & Tremblay, R. (août 2000). Inelastic seismic response of frame fasteners for steel roof decks [Communication écrite]. STESSA 2000 conf, Montréal, Québec. Lien externe
Rahal, A., Bosisio, R., Sawan, M., Rogers, C., & Ovey, J. (août 1996). Multi-stack quantum barrier varactor frequency triplers, an efficient way for MM-wave power generation [Communication écrite]. Symposium on Antenna Technology and Applied Electromagnetics (ANTEM 1996), Montréal, Québec. Lien externe
Rahal, A., Bosisio, R., Boch, E., Rogers, C., & Ovey, J. (août 1996). Planar V-band frequency tripler for indoor communication systems [Communication écrite]. Millimeter and submillimeter waves. 3rd Conference, Denver, CO, USA. Lien externe
