<  Retour au portail Polytechnique Montréal

Documents dont l'auteur est "Patience, Gregory"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement
Aller à : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | Z
Nombre de documents: 306

A

Asiedu-Boateng, P., Asiedu, N. Y., Zivkovic, V., & Patience, G. (2023). Attrition characteristics of limestone in gas-solid fluidized beds. Powder Technology, 419, 118342 (10 pages). Lien externe

Aldureid, A., Medina, F., Patience, G., & Montané, D. (2022). Ni-Cu/Al2O3 from Layered Double Hydroxides Hydrogenates Furfural to Alcohols. Catalysts, 12(4), 13 pages. Lien externe

Al-Mahayni, H., Wang, X., Harvey, J.-P., Patience, G., & Seifitokaldani, A. (2021). Experimental methods in chemical engineering: Density functional theory—DFT. Canadian Journal of Chemical Engineering, 99(9), 1885-1911. Lien externe

Asiedu-Boateng, P., Legros, R., & Patience, G. (2016). Attrition resistance of calcium oxide-copper oxide-cement sorbents for post-combustion carbon dioxide capture. Advanced Powder Technology, 27(2), 786-795. Lien externe

Aghabararnejad, M., Patience, G., & Chaouki, J. (2015). Techno-Economic Comparison of a 7-MWₜₕ Biomass Chemical Looping Gasification Unit with Conventional Systems. Chemical Engineering and Technology, 38(5), 867-878. Lien externe

Aghabararnejad, M., Patience, G., & Chaouki, J. (2015). Transient modeling of biomass steam gasification with Co3O4. Fuel, 140, 354-364. Lien externe

Aghabararnejad, M., Patience, G., & Chaouki, J. (2014). TGA and kinetic modelling of Co, Mn and Cu oxides for chemical looping gasification (CLG). Canadian Journal of Chemical Engineering, 92(11), 1903-1910. Lien externe

Aghabararnejad, M., Chaouki, J., & Patience, G. (novembre 2013). Modeling of biomass gasification in the presence oc Co3O4 in a bubbling fluidized bed [Communication écrite]. AIChE Annual Meeting, San Francisco, CA. Lien externe

Aghavararnejad, M., Chaouki, J., & Patience, G. (octobre 2012). Steam gasification of biomass using Co3O4 as an oxygen source in a bubbling fluidized bed [Communication écrite]. 62nd Canadian Chemical Engineering Conference, Vancouver, Canada. Non disponible

Aghabararnejad, M., Chaouki, J., & Patience, G. (mai 2011). The development of a novel Cu-Mn oxygen carrier for the chemical looping gasification of biomass [Communication écrite]. 10th International Conference on Circulating Fluidized Beds and Fluidization Technology (CFB 2011), Sun River, Oregon (8 pages). Lien externe

Alonso, M., Patience, G., Fernandez, J. R., Lorences, M. J., Diez, F., Vega, A., & Cenni, R. (2006). Heat Transfer Studies in an Inorganic Membrane Reactor at Pilot Plant Scale. Catalysis Today, 118(1-2), 32-38. Lien externe

Alonso, M., Diez, F. V., Vega, A. V., Lorences, M. J., & Patience, G. (janvier 2006). Oxidation of butane to maleic anhydride in a simulated circulating bed and membrane reactor [Communication écrite]. 2nd Conference of the European Union Coordination Action "CO-ordination of Nanostructured Catalytic Oxides Research and Development in Europe, Greece. Non disponible

Alonso, M., Lorences, M. J., Patience, G., Vega, A. B., Diez, F. V., & Dahl, S. (2005). Membrane Pilot Reactor Applied to Selective Oxidation Reactions. Catalysis Today, 104(2-4), 177-184. Lien externe

Alonso, M., Patience, G., Fernandez, J. R., Lorences, M. J., Diez, F., Vega, A., & Cenni, R. (septembre 2005). Pilot scale heat transfer in an inorganic membrane reactor [Communication écrite]. 7th International Conference on Catalysis in membrane reactors, Italy. Non disponible

Alonso, M., Lorences, M. J., Pina, M. P., & Patience, G. (2001). Butane partial oxidation in an externally fluidized bed-membrane reactor. Catalysis Today, 67(1-3), 151-157. Lien externe

B

Bianchi, C. L., Djellabi, R., Ponti, A., Patience, G., & Falletta, E. (2021). Experimental methods in chemical engineering: Mössbauer spectroscopy. Canadian Journal of Chemical Engineering, 99(10), 2105-2114. Lien externe

Berard, A., Blais, B., & Patience, G. (2021). Fluidized bed hydrodynamic modeling of CO2 in syngas: Distorted RTD curves due to adsorption on FCC. AICHE Journal, 67(11), e17380 (12 pages). Lien externe

Badehbakhsh, S., Saadatkhah, N., Mahboub, M. J. D., Guerrero-Perez, O., & Patience, G. (2021). Morphological changes of vanadyl pyrophosphate due to thermal excursions. Catalysis Today, 11 pages. Lien externe

Berard, A., Blais, B., & Patience, G. (2021). Residence time distribution in fluidized beds: diffusion, dispersion, and adsorption. Advanced Powder Technology, 32(5), 1677-1687. Lien externe

Bindes, M. M. M., Terra, N. M., Patience, G., Boffito, D. C., Cardoso, V. L., & Reis, M. H. M. (2020). Asymmetric Al₂O₃ and PES/Al₂O₃ hollow fiber membranes for green tea extract clarification. Journal of Food Engineering, 277, 109889. Lien externe

Bakker, M. G., Fowler, B., Bowman, M. K., & Patience, G. (2020). Experimental methods in chemical engineering: Electron paramagnetic resonance spectroscopy-EPR/ESR. Canadian Journal of Chemical Engineering, 98(8), 1668-1681. Lien externe

Bérard, A., Blais, B., & Patience, G. (2020). Experimental methods in chemical engineering: Residence time distribution-RTD. Canadian Journal of Chemical Engineering, 98(4), 848-867. Lien externe

Braidy, N., Bechu, A., de Souza Terra, J. C., & Patience, G. (2020). Experimental methods in chemical engineering: Transmission electron microscopyTEM. Canadian Journal of Chemical Engineering, 98(3), 628-641. Lien externe

Bérard, A., Patience, G., & Blais, B. (2020). Experimental methods in chemical engineering: Unresolved CFD-DEM. Canadian Journal of Chemical Engineering, 98(2), 424-440. Lien externe

Bruel, C., Queffeulou, S., Darlow, T., Virgilio, N., Tavares, J. R., & Patience, G. (2019). Experimental methods in chemical engineering: Contact angles. Canadian Journal of Chemical Engineering, 97(4), 832-842. Disponible

Blais, B., Vidal, D., Bertrand, F., Patience, G., & Chaouki, J. (2019). Experimental methods in chemical engineering: Discrete element method - DEM. Canadian Journal of Chemical Engineering, 97(7), 1964-1973. Lien externe

Bardestani, R., Patience, G., & Kaliaguine, S. (2019). Experimental methods in chemical engineering: Specific surface area and pore size distribution measurements—BET, BJH, DFT. Canadian Journal of Chemical Engineering, 97(11), 2781-2791. Lien externe

Boffito, D. C., Galli, F., Pirola, C., & Patience, G. (2017). CaO and isopropanol transesterify and crack triglycerides to isopropyl esters and green diesel. Energy Conversion and Management, 139, 71-78. Lien externe

Berard, A., Patience, G., Chouinard, G., & Tavares, J. R. (2017). Erratum: Photo Initiated Chemical Vapour Deposition To Increase Polymer Hydrophobicity. Scientific Reports, 7, 1 pages. Lien externe

Bruel, C., Laraque, R., Omanovic, S., Coulombe, S., & Patience, G. (2017). Pt thin film transient mobility over yttria stabilized zirconia. Thin Solid Films, 626, 17-24. Lien externe

Bérard, A., Patience, G., Chouinard, G., & Tavares, J. R. (2016). Photo initiated chemical vapour deposition to increase polymer hydrophobicity. Scientific Reports, 6(1). Disponible

Bruel, C., Chiron, F.-X., Tavares, J. R., & Patience, G. (2016). An exponential expression for gas heat capacity, enthalpy, and entropy. Experimental Thermal and Fluid Science, 78, 249-253. Lien externe

Boffito, D. C., Patience, P. A., Srinivasan, B., Perrier, M., & Patience, G. (2016). How do you write and present research well? 10 - State the uncertainty, but not too precisely. Canadian Journal of Chemical Engineering, 94(8), 1425-1430. Lien externe

Boffito, D. C., Patience, P. A., & Patience, G. (2016). How do you write and present research well? 13-Set axis titles to within 1 pt of article text. Canadian Journal of Chemical Engineering, 94(9), 1633-1635. Lien externe

Boffito, D. C., Patience, C. A., Patience, P. A., Bertrand, F., & Patience, G. (2016). How do you write and present research well? 8 - Assign authorship according to intellectual involvement. Canadian Journal of Chemical Engineering, 94(6), 1127-1134. Lien externe

Boffito, D. C., Leveque, J. M., Pirola, C., Bianchi, C. L., Vibert, R., Perrier, A., & Patience, G. (2015). Batch and Continuous Ultrasonic Reactors for the Production of Methyl Esters from Vegetable Oils. Dans Production of Biofuels and Chemicals with Ultrasound (87-114). Lien externe

Boffito, D. C., Martinez-Guerra, E., Gude, V. G., & Patience, G. (2015). Conversion of Refined and Waste Oils by Ultrasound-assisted Heterogeneous Catalysis. Dans Ashokkumar, M. (édit.), Handbook of Ultrasonics and Sonochemistry (33 pages). Lien externe

Boffito, D. C., Blanco Manrique, G., & Patience, G. (2015). One step cracking/transesterification of vegetable oil: Reaction-regeneration cycles in a capillary fluidized bed. Energy Conversion and Management, 103, 958-964. Lien externe

Bérad, A., Patience, G., & Tavares, J. R. (octobre 2015). Superhydrophobic exclusion net for apple grower application [Communication écrite]. Canadian Chemical Engineering Conference, Calgary, Alberta. Non disponible

Boffito, D. C., Galli, F., Martinez, P. R., Pirola, C., Bianchi, C. L., & Patience, G. (mai 2015). Transesterification of triglycerides in a new ultrasonic-assisted mixing device [Communication écrite]. 12th International Conference on Chemical & Process Engineering (ICheaP12), Milan, Italy. Publié dans Chemical Engineering Transactions, 43. Lien externe

Boffito, D. C., Neagoe, C., Edake, M., Pastor-Ramirez, B., & Patience, G. (2014). Biofuel synthesis in a capillary fluidized bed. Catalysis Today, 237, 13-17. Lien externe

Boffito, D. C., Galli, F., Pirola, C., Bianchi, C. L., & Patience, G. (2014). Ultrasonic free fatty acids esterification in tobacco and canola oil. Ultrasonics Sonochemistry, 21(6), 1969-1975. Lien externe

Bordes-Richard, E., Shekari, A., & Patience, G. (2014). Vanadium-phosphorus oxide catalyst for n-butane selective oxidation : from the catalyst synthesis to the industrial process. Dans Duprez, D., & Cavani, F. (édit.), Handbook of advanced methods and processes in oxidation catalysis : from laboratory to industry . Lien externe

Bordes-Richard, E., & Patience, G. (septembre 2013). Scaling-up the oxidation of n-butane to maleic anhydride on VPO catalyst : oxocapacity vs. catalytic performance [Communication écrite]. 11th European Congress on Catalysis (EuropaCat-XI), Lyon, France. Non disponible

Blanco, R. M., Shekari, A., Carrazan, S. G., Bordes-Richard, E., Patience, G., & Ruiz, P. (2013). Significant Catalytic Recovery of Spent Industrial Dupont Catalysts by Surface Deposition of an Amorphous Vanadium-Phosphorus Oxide Phase. Catalysis Today, 203, 48-52. Lien externe

Boffito, D. C., Pirola, C., Bianchi, C., & Patience, G. (juillet 2013). Sonochemical techniques for the transformation of bio-based oils into fuel [Communication écrite]. 1st Meeting of Asia-Oceania Sonochemical Society, Melbourne, Australia. Non disponible

Boffito, D. C., Pirola, C., Bianchi, C., & Patience, G. (avril 2013). Sonochemical techniques to increase the efficiency of methyl esters production from non-food oils [Communication écrite]. 245th ACS National Meeting and Exposition, New Orleans, Louisiana. Non disponible

Boffito, D. C., Mansi, S., Leveque, J. M., Pirola, C., Bianchi, C. L., & Patience, G. (2013). Ultrafast Biodiesel Production Using Ultrasound in Batch and Continuous Reactors. ACS Sustainable Chemistry & Engineering, 1(11), 1432-1439. Lien externe

Bordes-Richard, E., Shekari, A., & Patience, G. (décembre 2012). Oxidation on n-butane on VPO catalysts in various reactorsL effects of transient redox conditions on the production of maleic anhydride [Communication écrite]. XX International Conference on Chemical Reactors (CHEM REACTORS XX), Luxembourg. Non disponible

Blanco, R. M., Carrazan, S. G., Shekari, A., Bordes-Richard, E., Patience, G., & Ruiz, P. (septembre 2012). Reactivacion de un catalizador industrial de fosforo-vanadio (DuPont VPO) por deposicion de una fase amrofa de oxido di fosforo-vandio en su superficie [Communication écrite]. XXIII Congreso Iberoamericano de Catalisis, Santa Fe, Argentina. Non disponible

Berruti, F., Chaouki, J., Godfroy, L., Pugsley, T. S., & Patience, G. (1995). Hydrodynamics of circulating fluidized-bed risers - a review. Canadian Journal of Chemical Engineering, 73(5), 579-602. Lien externe

C

Chub, O. V., Dubois, J.-L., & Patience, G. (2023). Zeolite Y hydrolyses methyl methacrylate to methacrylic acid in the gas phase. Chemical Engineering Journal, 459, 141479 (10 pages). Lien externe

Chub, O. V., Saadatkhah, N., Dubois, J.-L., & Patience, G. (2022). Fluidized bed poly(methyl methacrylate) thermolysis to methyl methacrylate followed by catalytic hydrolysis to methacrylic acid. Applied Catalysis A-General, 638, 118637 (11 pages). Lien externe

Carnevali, D., D'Oliveira, A., Rigamonti, M. G., Cavani, F., & Patience, G. (2022). Pt-WO3 oxydehydrates fructose to furans in the gas phase. Chemical Engineering Journal, 429, 10 pages. Lien externe

Chub, O. V., Dubois, J.-L., & Patience, G. (2022). Tandem fluidized bed/milli-second fixed bed reactor produces methacrylic acid from poly(methyl methacrylate). Applied Catalysis A-General, 647, 118887 (6 pages). Lien externe

Carnevali, D., Guevremont, O., Rigamonti, M. G., Stucchi, M., Cavani, F., & Patience, G. (2018). Gas-phase fructose conversion to furfural in a microfluidized bed reactor. ACS Sustainable Chemistry and Engineering, 6(4), 5580-5587. Lien externe

Carnevali, D., Rigamonti, M. G., Tabanelli, T., Patience, G., & Cavani, F. (2018). Levulinic acid upgrade to succinic acid with hydrogen peroxide. Applied Catalysis A: General, 563, 98-104. Lien externe

Cardona, M., Boffito, D. C., & Patience, G. (2015). Thermogravimetric heat and mass transfer: Modeling of bitumen pyrolysis. Fuel, 143, 253-261. Lien externe

Chiron, F.-X., & Patience, G. (2012). Kinetics of mixed copper-iron based oxygen carriers for hydrogen production by chemical looping water splitting. International Journal of Hydrogen Energy, 37(14), 10526-10538. Lien externe

Chiron, F.-X., Patience, G., & Rifflart, S. (2011). Hydrogen production through chemical looping using NiO/NiAl₂O₄ as oxygen carrier. Chemical Engineering Science, 66(24), 6324-6330. Lien externe

Chiron, F.-X., & Patience, G. (octobre 2011). Hydrogen production via water splitting over Fe-Cu based oxygen carriers [Communication écrite]. 61st Canadian Chemical Engineering Conference, London, Ontario. Non disponible

Chiron, F.-X., & Patience, G. (2011). Steam carbon gasification of a nickel based oxygen carrier. Fuel, 90(7), 2461-2466. Lien externe

Chaouki, J., Laviolette, J.-P., & Patience, G. (mai 2010). Fibre-optic probe for the simultaneous measurement of gaseous species composition and solids volume fraction [Communication écrite]. 13th International Conference on Fluidization: New Paradigm in Fluidization Engineering, Gyeong-ju, Korea (8 pages). Lien externe

Chiron, F.-X., Patience, G., & Rifflart, S. (mai 2010). H₂ production by chemical looping reforming of methane using NiO/niAl₂O₃ as oxygen carrier [Communication écrite]. 9th Novel Gas Conversion Symposium, Lyon, France. Lien externe

Chiron, F.-X., Patience, G., & Rifflart, S. (mars 2010). Kinetic mechanism derived through dosing reactants over NiO, Ni and NiC'' [Communication écrite]. 1st International Conference on Chemical Looping Combustion, Lyon, France. Non disponible

Chaouki, J., Laviolette, J.-P., & Patience, G. (2010). Method and device for simultaneous measurements of a sample in a multiphase system. (Demande de brevet no US20120182546). Lien externe

Chiron, F.-X., & Patience, G. (mai 2010). Steam carbon gasification of a nickel based oxygen carrier [Communication écrite]. 21th CSC, Kingston. Non disponible

Contractor, R. M., Horowitz, H. S., Patience, G., & Sullivan, J. D. (1999). Process for the calcination/activation of V/P/O catalyst. (Brevet no US5895821). Lien externe

Contractor, R. M., Garnett, D. I., Horowitz, H. S., Bergna, H. E., Patience, G., Schwartz, J. T., & Sisler, G. M. (1994). A New Commercial Scale Process for n-Butane Oxidation to Maleic Anhydride Using a Circulating Fluidized Bed Reactor. Studies in Surface Science and Catalysis, 82, 233-242. Lien externe

Contractor, R. M., Patience, G., Garnett, D. I., Horowitz, H. S., Sisler, G. M., & Bergna, H. E. (janvier 1993). A new process for n-butane oxidation to maleic anhydride using a circulating fluidized bed reactor [Communication écrite]. 4th International Conference on Circulating Fluidized Beds, Hidden Valley, PA. Non disponible

D

Davies, T. E., Li, H., Bessette, S., Gauvin, R., Patience, G., & Dummer, N. F. (2022). Experimental methods in chemical engineering: Scanning electron microscopy and X-ray ultra-microscopy-SEM and XuM. Canadian Journal of Chemical Engineering, 15 pages. Lien externe

De Tommaso, J., Rossi, F., Moradi, N., Pirola, C., Patience, G., & Galli, F. (2020). Experimental methods in chemical engineering: Process simulation. Canadian Journal of Chemical Engineering, 98(11), 2301-2320. Lien externe

Darabi Mahboub, M. J., Jazayeri, S. M., Chub, O., Dubois, J.–.L., & Patience, G. (2020). Oxidation kinetics of 2-methyl-1,3-propanediol to methacrylic acid in a fluidized bed reactor. Canadian Journal of Chemical Engineering, 99(7), 1475-1489. Lien externe

Darabi Mahboub, M. J., Dubois, J.-L., Cavani, F., Rostamizadeh, M., & Patience, G. (2018). Catalysis for the synthesis of methacrylic acid and methyl methacrylate. Chemical Society Reviews, 47(20), 7703-7738. Lien externe

Darabi Mahboub, M. J., Wright, J., Boffito, D. C., Dubois, J.-L., & Patience, G. (2018). Cs, V, Cu Keggin-type catalysts partially oxidize 2-methyl-1,3-propanediol to methacrylic acid. Applied Catalysis A: General, 554, 105-116. Lien externe

Dalil, M., Edake, M., Sudeau, C., Dubois, J.-L., & Patience, G. (2016). Coke promoters improve acrolein selectivity in the gas-phase dehydration of glycerol to acrolein. Applied Catalysis A: General, 522, 80-89. Lien externe

Dubois, J.-L., & Patience, G. (2016). Continuous catalyst regeneration in a fluidized bed reactor. (Brevet no US9427718). Lien externe

Dalil, M., Carnevali, D., Edake, M., Auroux, A., Dubois, J.-L., & Patience, G. (2016). Gas phase dehydration of glycerol to acrolein: Coke on WO3/TiO2 reduces by-products. Journal of Molecular Catalysis A: Chemical, 421, 146-155. Lien externe

Darabi Mahboub, M. J., Lotfi, S., Dubois, J. L., & Patience, G. (2016). Gas phase oxidation of 2-methyl-1,3-propanediol to methacrylic acid over heteropolyacid catalysts. Catalysis Science & Technology, 6(17), 6525-6535. Lien externe

Darabi Mahboub, M. J., Rostamizadeh, M., Dubois, J.-, & Patience, G. (2016). Partial oxidation of 2-methyl-1,3-propanediol to methacrylic acid: experimental and neural network modeling. RSC Advances, 6(115), 114123-114134. Lien externe

Dalil, M., Carnevali, D., Dubois, J. L., & Patience, G. (2015). Transient acrolein selectivity and carbon deposition study of glycerol dehydration over WO3/TiO2 catalyst. Chemical Engineering Journal, 270, 557-563. Lien externe

Dubois, J.-L., & Patience, G. (2013). Method for the reactive vaporization of glycerol. (Brevet no US8530697). Lien externe

Dubrawski, K., Tebianian, S., Bi, H. T., Chaouki, J., Ellis, N., Gerspacher, R., Jafari, R., Kantzas, A., Lim, C., Patience, G., Pugsley, T., Qi, M. Z., Zhu, J. X., & Grace, J. R. (2013). Traveling column for comparison of invasive and non-invasive fluidization voidage measurement techniques. Powder Technology, 235, 203-220. Lien externe

Dalil, M., Patience, G., Dubois, J.-L., & Neagoe, C. (octobre 2012). Lactic acid stability as a function of temperature [Communication écrite]. 62nd Canadian Chemical Engineering Conference, Vancouver, Canada. Non disponible

Dubois, J.-L., & Patience, G. (2012). Method for preparing acrylic acid from glycerol. (Brevet no US8212070). Lien externe

Dubois, J.-L., Dupont, N., & Patience, G. (2011). Process for the selective oxidation of carbon monoxide. (Demande de brevet no US20130131380). Lien externe

E

Eran, T. N., Galli, F., Mazzoni, F., Longhi, M., Grainca, A., Patience, G., & Pirola, C. (2022). Metallosilicates as an iron support to catalyze Fischer-Tropsch synthesis. Catalysis Today, 404, 132-141. Lien externe

Edake, M., Dalil, M., Darabi Mahboub, M. J., Dubois, J.-L., & Patience, G. (2017). Catalytic glycerol hydrogenolysis to 1,3-propanediol in a gas–solid fluidized bed. RSC Advances, 7(7), 3853-3860. Disponible

F

Fernandez Rivas, D., Boffito, D. C., Faria-Albanese, J., Glassey, J., Afraz, N., Akse, H., Boodhoo, K. V. K., Bos, R., Cantin, J., Chiang, Y. W., Commenge, J.-M., Dubois, J.-L., Galli, F., de Mussy, J. P. G., Harmsen, J., Kalra, S., Keil, F. J., Morales-Menendez, R., Navarro-Brull, F. J., ... Weber, R. S. (2020). Process intensification education contributes to sustainable development goals. Part 1. Education for Chemical Engineers, 32, 14 pages. Lien externe

G

Golshan, S., Patience, G., Zarghami, R., Chaouki, J., & Blais, B. (2022). Experimental methods in chemical engineering: Optical fibre probes in multiphase systems. Canadian Journal of Chemical Engineering, 16 pages. Lien externe

Guerrero-Pérez, M. O., Patience, G., & Bañares, M. A. (2021). Experimental methods in chemical engineering: Raman spectroscopy. Canadian Journal of Chemical Engineering, 99(1), 97-107. Lien externe

Galli, F., Lai, J.-J., De Tommaso, J., Pauletto, G., & Patience, G. (2021). Gas to Liquids Techno-Economics of Associated Natural Gas, Bio Gas, and Landfill Gas. Processes, 9(9), 1568 (15 pages). Lien externe

Guerrero-Perez, M. O., & Patience, G. (2020). Experimental methods in chemical engineering: Fourier transform infrared spectroscopy-FTIR. Canadian Journal of Chemical Engineering, 98(1), 25-33. Lien externe

Ghanbari, A., Mousavi, Z., Heuzey, M.-C., Patience, G., & Carreau, P. (2020). Experimental methods in chemical engineering: Rheometry. Canadian Journal of Chemical Engineering, 98(7), 1456-1470. Lien externe

Gomes, A. J., Lunardi, C. N., Rocha, F. S., & Patience, G. (2019). Experimental methods in chemical engineering: Fluorescence emission spectroscopy. Canadian Journal of Chemical Engineering, 97(8), 2168-2175. Lien externe

Galli, F., Bonfanti, L., Capelli, S., Manenti, F., Bianchi, C. L., Patience, G., & Pirola, C. (2015). Heterogeneous Oil Transesterification in a Single-Phase Liquid Mixture using a Co-Solvent for Improved Biofuels Production. Energy Technology, 3(12), 1170-1173. Lien externe

Ghaznavi, T., Neagoe, C., & Patience, G. (2014). Partial oxidation of d-xylose to maleic anhydride and acrylic acid over vanadyl pyrophosphate. Biomass and Bioenergy, 71, 285-293. Lien externe

Godefroy, A., Patience, G., Cenni, R., & Dubois, J.-L. (2010). Regeneration studies of redox catalysts. Chemical Engineering Science, 65(1), 261-266. Lien externe

Godefroy, A., Patience, G., Tzakova, T., Garrait, D., & Dubois, J.-L. (2009). Reactor technologies for propane partial oxidation to acrylic acid. Chemical Engineering and Technology, 32(3), 373-379. Lien externe

Godefroy, A., Patience, G., Tzakova, T., Garrait, D., & Dubois, J.-L. (mai 2008). Alternative technologies for acrylic acid production : fixed vs fluis vs. circulating fluid bed [Communication écrite]. 9th International Conference on Circulating Fluidized Beds in conjunction with 4th Int. VGB Workshop "Operating Experience with luidized Bed Firing Systems", Hamburg, Germany. Non disponible

Godefroy, A., Patience, G., Tzakova, T., Garrait, D., & Dubois, J.-L. (mai 2008). Alternatives for acrylic acid production: fixed vs. fluid vs. circulating fluid bed reactors [Communication écrite]. 9th International Conference on Circulating Fluidized Beds in conjunction with 4th Int. VGB Workshop "Operating Experience with Fluidized Bed Firing Systems", Hamburg, Germany. Non disponible

Godefroy, A., Patience, G., & Dubois, J.-L. (juillet 2008). COₓ and H₂O evolution during re-oxdiation of vanadium based oxides [Communication écrite]. 20th CSC, Kingston. Non disponible

Godefroy, A., Patience, G., & Cenni, R. (septembre 2008). Regeneration kinetics of redox catalysts [Communication écrite]. 20th International Symposium on Chemical Reaction Engineering, Kyoto, Japan. Non disponible

Garnett, D. I., & Patience, G. (juillet 2005). From scale-up to experience curves [Communication écrite]. World Chemical Engineering Congress, Glasgow, Scotland. Non disponible

Godfroy, L., Patience, G., & Chaouki, J. (1999). Radial Hydrodynamics in Risers. Industrial & Engineering Chemistry Research, 38(1), 81-89. Lien externe

Garnett, D. I., & Patience, G. (1994). Scale-Up. Dans McKetta, J. J. (édit.), Encyclopedia of Chemical Processing and Design (65-69). Non disponible

Garnett, D. I., & Patience, G. (1993). Reply to: Why do Scale-up Power Laws Work? Chemical Engineering Progress, 89(12), 10 pages. Non disponible

Garnett, D. I., & Patience, G. (1993). Why do Scale-up Power Laws Work? Chemical Engineering Progress, 89(8), 76-78. Non disponible

H

Harvey, J.-P., Saadatkhah, N., Dumont-Vandewinkel, G., Ackermann, S., & Patience, G. (2018). Experimental methods in chemical engineering: Differential scanning calorimetry-DSC. Canadian Journal of Chemical Engineering, 96(12), 2518-2525. Lien externe

Hutchenson, K. W., La Marca, C., Patience, G., Laviolette, J.-P., & Bockrath, R. E. (2010). Parametric study of n-butane oxidation in a circulating fluidized bed reactor. Applied Catalysis A: General, 376(1), 91-103. Lien externe

I

Iglesias‐Juez, A., Chiarello, G. L., Patience, G., & Guerrero‐Pérez, M. O. (2021). Experimental methods in chemical engineering: X ‐ray absorption spectroscopy— XAS , XANES , EXAFS. The Canadian Journal of Chemical Engineering, 1-20. Disponible

Iliuta, I., Tahoces, R., Patience, G., Rifflart, S., & Luck, F. (2010). Chemical-looping combustion process: Kinetics and mathematical modeling. AICHE Journal, 56(4), 1063-1079. Lien externe

J

Jehng, J.-M., Wachs, I. E., Patience, G., & Dai, Y.-M. (2021). Experimental methods in chemical engineering: Temperature programmed surface reaction spectroscopy—TPSR. Canadian Journal of Chemical Engineering, 99(2), 423-434. Lien externe

K

Khan, H., Yerramilli, A. S., D'Oliveira, A., Alford, T. L., Boffito, D. C., & Patience, G. (2020). Experimental methods in chemical engineering: X‐ray diffraction spectroscopy-XRD. Canadian Journal of Chemical Engineering, 98(6), 1255-1266. Lien externe

Khan, H., Rigamonti, M. G., Patience, G., & Boffito, D. C. (2018). Spray dried TiO2/WO3heterostructure for photocatalytic applications with residual activity in the dark. Applied Catalysis B: Environmental, 226, 311-323. Lien externe

Kasprzak, W., Li, D. L., Patience, G., Sauriol, P., Amaris, H. V., Dolle, M., Gauthier, M., Rousselot, S., Talebi-Esfandarani, M., Bibienne, T., Sun, X. L., Liu, Y. L., & Liang, G. X. (2017). Using induction melting to make lithium-ion battery material. Advanced Materials & Processes, 175(8), 16-22. Lien externe

Kaarsholm, M., Joensen, F., Cenni, R., Chaouki, J., & Patience, G. (2011). MEOH to DME in bubbling fluidized bed: Experimental and modelling. Canadian Journal of Chemical Engineering, 89(2), 274-283. Lien externe

Kaarsholm, M., Rafii, B., Joensen, F., Cenni, R., Chaouki, J., & Patience, G. (2010). Kinetic modeling of methanol-to-olefin reaction over ZSM-5 in fluid bed. Industrial and Engineering Chemistry Research, 49(1), 29-38. Lien externe

Kaarsholm, M., Cenni, R., Joensen, F., Chaouki, J., & Patience, G. (août 2009). Investigation of the MTO reaction in fluid bed by MS [Communication écrite]. 8th World Congress of Chemical Engineering, Montréal, Québec. Non disponible

Kristian-Kaarsholm, M., Cenni, R., Joensen, F., Chaouki, J., & Patience, G. (septembre 2007). Deactivation of phosphorous modified ZSM-5 for the MTO reaction [Communication écrite]. EuroCat 8, Turku, Finland. Non disponible

Kaarsholm, M., Joensen, F., Nerlov, J., Cenni, R., Chaouki, J., & Patience, G. (2007). Phosphorous Modified ZSM-5: Deactivation and Product Distribution for Mto. Chemical Engineering Science, 62(18-20), 5527-5532. Lien externe

Kristian-Kaarsholm, M., Nerlow, J., Chaouki, J., & Patience, G. (septembre 2006). Activity Profile of ZSM-5 for Methanol-to-Olefins [Communication écrite]. 19 International Symposia on Chemical Reaction Engineering, Potsdam, Germany. Non disponible

L

Laajimi, H., Galli, F., Patience, G., & Schieppati, D. (2022). Experimental methods in chemical engineering: Gas chromatography-GC. Canadian Journal of Chemical Engineering, 22 pages. Lien externe

Lunardi, C. N., Gomes, A. J., Rocha, F. S., De Tommaso, J., & Patience, G. (2021). Experimental methods in chemical engineering: Zeta potential. Canadian Journal of Chemical Engineering, 99(3), 627-639. Lien externe

Lotfi, S., Bahrpaima, K., Boffito, D. C., & Patience, G. (2020). Gas-solid oxidation of unwashed lignin to carboxylic acids. Energy & Fuels, 34(8), 9683-9696. Lien externe

Li, H., Cabanas-Gac, F., Hadidi, L., Bilodeau-Calame, M., Abid, A., Mameri, K., Rigamonti, M. G., Rousselot, S., Dolle, M., & Patience, G. (2020). Ultrasound assisted wet media milling synthesis of nanofiber-cage LiFePO₄/C. Ultrasonics Sonochemistry, 68, 11 pages. Lien externe

Li, H., Li, J., Bodycomb, J., & Patience, G. (2019). Experimental methods in chemical engineering: Particle size distribution by laser diffraction-PSD. Canadian Journal of Chemical Engineering, 97(7), 1974-1981. Lien externe

Lefebvre, J., Galli, F., Bianchi, C. L., Patience, G., & Boffito, D. C. (2019). Experimental methods in chemical engineering: X-ray photoelectron spectroscopy-XPS. Canadian Journal of Chemical Engineering, 97(10), 2588-2593. Lien externe

Li, H., Rostamizadeh, M., Mameri, K., Boffito, D. C., Saadatkhah, N., Rigamonti, M. G., & Patience, G. (2019). Ultrasound assisted wet stirred media mill of high concentration LiFePO₄ and catalysts. Canadian Journal of Chemical Engineering, 97(8), 2242-2250. Lien externe

Lotfi, S., Mollaabbasi, R., & Patience, G. (2018). Kinetics of softwood kraft lignin inert and oxidative thermolysis. Biomass and Bioenergy, 109, 239-248. Lien externe

Li, D., Kasprzak, W., Patience, G., Sauriol, P., Villazón Amarís, H., Dollé, M., Gauthier, M., Rousselot, S., Talebi-Esfandarani, M., Bibienne, T., Sun, X., Liu, Y., & Liang, G. (2018). Production of lithium-ion cathode material for automotive batteries using melting casting process. Dans 9th International Symposium on High-Temperature Metallurgical Processing (TMS 2018) (135-146). Lien externe

Louyot, P., Neagoe, C., Galli, F., Pirola, C., Patience, G., & Boffito, D. C. (2018). Ultrasound-assisted impregnation for high temperature Fischer-Tropsch catalysts. Ultrasonics Sonochemistry, 48, 523-531. Lien externe

Li, H., Ndjamo, A., Sauriol, P., & Patience, G. (2017). Optimization of LiFePO₄ wet media milling and regressive population balance modeling. Advanced Powder Technology, 28(3), 1000-1007. Lien externe

Lotfi, S., Boffito, D. C., & Patience, G. (2016). Gas-solid conversion of lignin to carboxylic acids. Reaction Chemistry & Engineering, 1(4), 397-408. Lien externe

Lotfi, S., Boffito, D. C., & Patience, G. (2015). Gas-Phase Partial Oxidation of Lignin to Carboxylic Acids over Vanadium Pyrophosphate and Aluminum-Vanadium-Molybdenum. ChemSusChem: Chemistry & Sustainability-Energy & Materials, 8(20), 3424-3432. Lien externe

Laviolette, J.-P., Patience, G., La Marca, C., & Chaouki, J. (2013). Gas-phase propane combustion in the freeboard of a fluidized bed. Fuel, 111, 316-323. Lien externe

Lotfi, S., & Patience, G. (octobre 2012). Synthesis of carboxylic acids by oxidation of lignin in the presence of heterogeneous catalyst [Communication écrite]. 62nd Canadian Chemical Engineering Conference, Vancouver, Canada. Non disponible

Laviolette, J.-P., Patience, G., & Chaouki, J. (2011). Non-premixed fluidized bed combustion of C1-C4 n-alkanes. Fuel, 90(9), 2850-2857. Lien externe

Laviolette, J.-P., Patience, G., & Chaouki, J. (mai 2010). Fluidized bed combustion of C₁-C₄ n-alkanes [Communication écrite]. Fluidization XIII, Korea. Lien externe

Laviolette, J.-P., Sotudeh-Gharebagh, R., Mabrouk, R., Patience, G., & Chaouki, J. (2010). Fluidized Bed Combustion of Natural Gas and other Hydrocarbons. Dans Handbook of Combustion . Lien externe

Laviolette, J.-P., Sotudeh-Gharebagh, R., Mabrouk, R., Patience, G., & Chaouki, J. (2010). Homogeneous combustion in the freeboard of a fluidized bed. Dans Handbook of combustion . Non disponible

Laviolette, J.-P., Patience, G., & Chaouki, J. (2010). Simultaneous quantitative measurement of gaseous species composition and solids volume fraction in a gas/solid flow. AICHE Journal, 56(11), 2850-2859. Lien externe

Laviolette, J.-P., Patience, G., Lamarca, C., & Chaouki, J. (août 2009). Gas-phase combustion in the freeboard of a fluidized bed [Communication écrite]. 8th World Congress of Chemical Engineering, Montréal, Québec. Non disponible

Laviolette, J.-P., Patience, G., & Chaouki, J. (mai 2009). Gas-phase combustion in the freeboard of a fluidized bed-freeboard characterization [Communication écrite]. 20th International Conference on Fluidized Bed Combustion, Xian, China. Lien externe

Laviolette, J.-P., Patience, G., & Chaouki, J. (2009). Hydrocarbons combustion in fluidized beds. Dans Handbook of combustion . Non disponible

Laviolette, J.-P., Patience, G., & Chaouki, J. (novembre 2008). Gas-phase propane combustion in the freeboard of a fluidized bed [Communication écrite]. Industrial Fluidization South Africa Conference, Gauteng. Non disponible

Lorences, M. J., Laviolette, J.-P., Patience, G., Alonso, M., & Diez, F. V. (2006). Fluid Bed Gas RTD: Effect of Fines and Internals. Powder Technology, 168(1), 1-9. Lien externe

Laviolette, J.-P., Duchastel-Légaré, J., Patience, G., LaMarca, C., & Chaouki, J. (décembre 2006). Propane oxidation induction time: fluid bed freeboard characterization [Communication écrite]. CHEMCON 2006, Bharuch, India. Non disponible

Lorences, M. J., Patience, G., Cenni, R., Diez, F., & Coca, J. (2006). VPO Transient Lattice Oxygen Contribution. Catalysis Today, 112(1-4), 45-48. Lien externe

Lorences, M. J., Patience, G., Cenni, R., Diez, F., & Coco, J. (mai 2005). Accelerating butane oxidation kinetics over VPO [Communication écrite]. 19th NAM, Philadelphia. Non disponible

Lorences, M. J., Patience, G., Cenni, R., Diez, F., & Coca, J. (janvier 2005). VPO lattice oxygen contribution [Communication écrite]. 1st Conference of the European Union Coordination Action "CO-ordination of Nanostructured Catalytic Oxides Research and Development in Europe, Concorde, Belgium. Non disponible

Lorences, M. J., Patience, G., Diez, F., & Coca, J. (2004). Transient n-Butane partial oxidation kinetics over VPO. Applied Catalyst. A, General, 263(2), 193-202. Lien externe

Lorences, M. J., Patience, G., Díez, F. V., & Coca, J. (2003). Butane Oxidation to Maleic Anhydride:  Kinetic Modeling and Byproducts. Industrial & Engineering Chemistry Research, 42(26), 6730-6742. Lien externe

Lorences, M.́. J., Patience, G., Dı́ez, F. V., & Coca, J. (2003). Fines effects on collapsing fluidized beds. Powder Technology, 131(2-3), 234-240. Lien externe

M

Moraille, P., Abdali, Z., Ramkaran, M., Polcari, D., Patience, G., Dorval Courchesne, N.-M., & Badia, A. (2022). Experimental Methods in Chemical Engineering: Atomic force microscopy—AFM. The Canadian Journal of Chemical Engineering, 29 pages. Lien externe

Mocellin, P., De Tommaso, J., Vianello, C., Maschio, G., Saulnier-Bellemare, T., Virla, L. D., & Patience, G. (2022). Experimental methods in chemical engineering: Hazard and operability analysis-HAZOP. Canadian Journal of Chemical Engineering, 20 pages. Lien externe

Mehrotra, A. K., Soares, J. B. P., Nandakumar, K., Carreau, P., Epstein, N., & Patience, G. (2022). A perspective on The Canadian Journal of Chemical Engineering commemorating its 100th volume: 1929-2021. The Canadian Journal of Chemical Engineering, 24 pages. Lien externe

Mukundan, S., Boffito, D. C., Shrotri, A., Atanda, L., Beltramini, J., & Patience, G. (2020). Thermocatalytic Hydrodeoxygenation and Depolymerization of Waste Lignin to Oxygenates and Biofuels in a Continuous Flow Reactor at Atmospheric Pressure. ACS Sustainable Chemistry & Engineering, 8(35), 13195-13205. Lien externe

Ma, Z., Perreault, P., Pelegrin, D. C., Boffito, D. C., & Patience, G. (2020). Thermodynamically unconstrained forced concentration cycling of methane catalytic partial oxidation over CeO₂ FeCralloy catalysts. Chemical Engineering Journal, 380, 11 pages. Lien externe

Macchi, A., Plouffe, P., Patience, G., & Roberge, D. M. (2019). Experimental methods in chemical engineering: Micro-reactors. Canadian Journal of Chemical Engineering, 97(10), 2578-2587. Lien externe

Menendez, M., Herguido, J., Berard, A., & Patience, G. (2019). Experimental methods in chemical engineering: Reactors-fluidized beds. Canadian Journal of Chemical Engineering, 97(9), 2383-2394. Lien externe

Ma, Z., Patience, G., Boffito, D. C., & Pelegrin, D. C. (août 2018). Fecralloy partially oxidizes methane selectively [Communication écrite]. 2nd Natural Gas Utilization Workshop, College Station, TX, United states. Lien externe

Ma, Z., Trevisanut, C., Neagoe, C., Boffito, D. C., Jazayeri, S. M., Jagpal, C., & Patience, G. (2016). A micro-refinery to reduce associated natural gas flaring. Sustainable Cities and Society, 27, 116-121. Lien externe

Ma, Z., Ouzilleau, P., Trevisanut, C., Neagoe, C., Lotfi, S., Boffito, D. C., & Patience, G. (2016). Partial oxidation of methane to syngas over Pt/Rh/MgO catalyst supported on FeCralloy woven fibre. Canadian Journal of Chemical Engineering, 94(4), 642-649. Lien externe

Ma, Z., Trevisanut, C., Neagoe, C., Boffito, D. C., Jazayeri, S. M., Jagpal, C., & Patience, G. (mai 2015). A micro-refinery unit for the GTL transformation of associated natural gas [Communication écrite]. EIC Climate Change Technology Conference (CCTC 2015), Montréal, Québec (10 pages). Lien externe

Mehrotra, A. K., Patience, G., & Svrcek, W. Y. (2013). Calculation of gas solubility in Wabasca bitumen. Journal of Canadian Petroleum Technology, 28(03). Lien externe

Mateos-Blanco, R., Shekari, A., Gonzalez Carrazan, S., Caldarelli, Z., Cavani, F., Bordes-Richard, E., Patience, G., & Ruiz, P. (août 2011). Significant catalytic activity recovery of deactivated industrial Du-Pont VPO catalysts by surface deposition of small amounts of oxide [Communication écrite]. EuropaCAt X, Glasgow, Scotland. Non disponible

Mabrouk, R., Chaouki, J., Laviolette, J.-P., & Patience, G. (mai 2008). On natural gas combustion in a fluidized bed [Communication écrite]. 9th International Conference on Circulating Fluidized Beds in conjunction with 4th Int. VGB Workshop "Operating Experience with Fluidized Bed Firing Systems", Hamburg, Germany. Non disponible

Mehrotra, A. K., & Patience, G. (1992). Reply to Mitschka. Canadian Journal of Chemical Engineering, 70(4), 832-832. Lien externe

Mehrotra, A. K., & Patience, G. (1990). Erratum: Laminar start-up flow in short pipe lengths. Canadian Journal of Chemical Engineering, 68(2), 1 pages. Lien externe

Mehrotra, A. K., & Patience, G. (1990). Unified entry length for newtonian and power-law fluids in laminar pipe flow. Canadian Journal of Chemical Engineering, 68(4), 529-533. Lien externe

N

Nasri Lari, H., Farhanian, D., Boffito, D. C., Patience, G., De Crescenzo, G., Chaouki, J., & Tavares, J. R. (2017). Shedding light on iron pentacarbonyl photochemistry through a CVD case study. Catalysis Communications, 100, 19-23. Disponible

Neagoe, C., Boffito, D. C., Ma, Z., Trevisanut, C., & Patience, G. (2016). Pt on Fecralloy catalyses methane partial oxidation to syngas at high pressure. Catalysis Today, 270, 43-50. Lien externe

O

Ortega, C., Otyuskaya, D., Ras, E.-J., Virla, L. D., Patience, G., & Dathe, H. (2021). Experimental methods in chemical engineering: High throughput catalyst testing - HTCT. Canadian Journal of Chemical Engineering, 99(6), 1288-1306. Lien externe

P

Pahija, E., Panaritis, C., Gusarov, S., Shadbahr, J., Bensebaa, F., Patience, G., & Boffito, D. C. (2022). Experimental and Computational Synergistic Design of Cu and Fe Catalysts for the Reverse Water–Gas Shift: A Review. ACS Catalysis, 12(12), 6887-6905. Lien externe

Pahija, E., Panaritis, C., Rutherford, B., Couillard, M., Patarachao, B., Shadbahr, J., Bensebaa, F., Patience, G., & Boffito, D. C. (2022). FeOₓ nanoparticle doping on Cu/Al₂O₃ catalysts for the reverse water gas shift. Journal of CO2 Utilization, 64, 102155 (9 pages). Lien externe

Patience, G., Villasana, Y., & Boffito, D. C. (2022). Guest editorial: Biomass conversion for energy: Process intensification and economics. IET Renewable Power Generation, 16(14), 2935-2938. Lien externe

Patience, G. (2021). Case study I: n-Butane partial oxidation to maleic anhydride: VPP manufacture. Dans Chaouki, J., & Sotudeh-Gharebagh, R. (édit.), Scale-Up Processes: Iterative Methods for the Chemical, Mineral and Biological Industries (147-166). Lien externe

Patience, G., & Chaouki, J. (2021). Case study II: n-Butane partial oxidation to maleic anhydride: commercial design. Dans Chaouki, J., & Sotudeh-Gharebagh, R. (édit.), Scale-Up Processes: Iterative Methods for the Chemical, Mineral and Biological Industries (167-190). Lien externe

Patience, G. (2021). Conversion of glycerol to acrylic acid. Dans Industrial Green Chemistry . Lien externe

Pauletto, G., Libretto, N., Boffito, D. C., Miller, J. T., Jentys, A., Patience, G., & Lercher, J. A. (2021). Ni/CeO2 promoted Ru and Pt supported on FeCrAl gauze for cycling methane catalytic partial oxidationCPOX. Applied Catalysis B: Environmental, 286, 8 pages. Lien externe

Patience, G., & Patience, B. A. (2021). NSERC discovery grants and a tribute to Leo A. Behie. Canadian Journal of Chemical Engineering, 99(11), 2282-2293. Lien externe

Pauletto, G., Mendil, M., Libretto, N., Mocellin, P., Miller, J. T., & Patience, G. (2021). Short contact time CH4 partial oxidation over Ni based catalyst at 1.5MPa. Chemical Engineering Journal, 414, 9 pages. Lien externe

Pauletto, G., Galli, F., Gaillardet, A., Mocellin, P., & Patience, G. (2021). Techno economic analysis of a micro Gas-to-Liquid unit for associated natural gas conversion. Renewable and Sustainable Energy Reviews, 150, 10 pages. Lien externe

Patience, G., & Boffito, D. C. (2020). Distributed production: Scale‐up vs experience. Journal of Advanced Manufacturing and Processing, 2(2). Lien externe

Pauletto, G., Vaccari, A., Groppi, G., Bricaud, L., Benito, P., Boffito, D. C., Lercher, J. A., & Patience, G. (2020). FeCrAl as a Catalyst Support. Chemical Reviews, 120(15), 7516-7550. Lien externe

Patience, G., Galli, F., Patience, P. A., & Boffito, D. C. (2019). Intellectual contributions meriting authorship: Survey results from the top cited authors across all science categories. PLOS One, 14(1), e0198117. Disponible

Patience, G., Patience, C. A., Blais, B., & Bertrand, F. (2019). Erratum: Citation analysis of scientific categories. Heliyon, 5(3). Lien externe

Panerati, J., Schnellmann, M. A., Patience, C. A., Beltrame, G., & Patience, G. (2019). Experimental methods in chemical engineering: Artificial neural networks-ANNs. Canadian Journal of Chemical Engineering, 97(9), 2372-2382. Lien externe

Perreault, P., Robert, É., & Patience, G. (2019). Experimental methods in chemical engineering: Mass spectrometry-MS. Canadian Journal of Chemical Engineering, 97(5), 1036-1042. Lien externe

Patience, G., Chaouki, J., Latifi, M., Dollé, M., Chartrand, P., Kasprzak, W., Sun, X., Sham, T.-K., Liang, G., & Sauriol, P. (2019). Piloting Melt Synthesis and Manufacturing Processes to Produce C-LiFePO₄: Preface. Canadian Journal of Chemical Engineering, 97(8), 2189-2195. Lien externe

Patience, G., Pounis, G., Patience, P. A., & Boffito, D. C. (2019). Principles of research publication. Dans Analysis in nutrition research (197-230). Lien externe

Patience, G., Karirekinyana, G., Galli, F., Patience, N. A., Kubwabo, C., Collin, G., Bizimana, J. C., & Boffito, D. C. (2018). Sustainable manufacture of insect repellents derived from Nepeta cataria. Scientific Reports, 8(1), 2235 (9 pages). Disponible

Patience, G., Patience, C. A., & Bertrand, F. (2018). Chemical engineering research synergies across scientific categories. Canadian Journal of Chemical Engineering, 96(8), 1684-1690. Lien externe

Patience, G. (2018). Experimental methods in chemical engineering: Preface. Canadian Journal of Chemical Engineering, 96(11), 2312-2316. Lien externe

Pirola, C., Galli, F., & Patience, G. (2018). Experimental methods in chemical engineering: Temperature programmed reduction-TPR. Canadian Journal of Chemical Engineering, 96(11), 2317-2320. Lien externe

Patience, G., Patience, C. A., Blais, B., & Bertrand, F. (2017). Citation analysis of scientific categories. Heliyon, 3(5). Disponible

Patience, G., Boffito, D. C., & Patience, P. A. (2017). How do you write and present research well? Answers to the 20 questions. Canadian Journal of Chemical Engineering, 95(1), 11-20. Lien externe

Patience, G., Edake, M., Neagoe, C., & Boffito, D. C. (2017). Process and system for producing a fatty acid alkyl ester. (Brevet no US9540590). Lien externe

Perreault, P., & Patience, G. (2016). Carbonation and deactivation kinetics of a mixed calcium oxidecopper oxide sorbent/oxygen carrier for post-combustion carbon dioxide capture. Chemical Engineering Journal, 306, 726-733. Lien externe

Perreault, P., & Patience, G. (2016). Chemical looping syngas from CO₂ and H₂O over manganese oxide minerals. Canadian Journal of Chemical Engineering, 94(4), 703-712. Lien externe

Patience, G., & Boffito, D. C. (2016). Gas-to-liquids processes: Preface. Canadian Journal of Chemical Engineering, 94(4), 605-606. Lien externe

Patience, P. A., Boffito, D. C., & Patience, G. (2016). How do you write and present research well? 11 - Respect SI writing conventions. Canadian Journal of Chemical Engineering, 94(8), 1431-1434. Lien externe

Patience, G., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 12-Design graphs to fit within the journal column width. Canadian Journal of Chemical Engineering, 94(9), 1629-1632. Lien externe

Patience, P. A., Boffito, D. C., & Patience, G. (2016). How do you write and present research well? 14-Favour images over text in graphical abstracts. Canadian Journal of Chemical Engineering, 94(9), 1636-1639. Lien externe

Patience, G., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 16-Target an audience and promote. Canadian Journal of Chemical Engineering, 94(10), 1838-1840. Lien externe

Patience, G., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 17-Submit your manuscript to the journal you cite most. Canadian Journal of Chemical Engineering, 94(11), 2174-2178. Lien externe

Patience, G., Boffito, D. C., Darabi-Mahboub, M. J., King, M., & Patience, P. A. (2016). How do you write and present research well? 18-Publish and flourish. Canadian Journal of Chemical Engineering, 94(11), 2179-2185. Lien externe

Patience, G., Patience, C. A., Bertrand, F., Patience, P. A., & Boffito, D. C. (2016). How do you write and present research well? 19-Emulate articles in high impact factor journals. Canadian Journal of Chemical Engineering, 94(12), 2237-2239. Lien externe

Patience, G., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 20-State the novelty of your research explicitly. Canadian Journal of Chemical Engineering, 94(12), 2240-2242. Lien externe

Patience, G., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 3 - Shave your text with Occam's razor. Canadian Journal of Chemical Engineering, 94(1), 3-6. Lien externe

Patience, G., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 4 - Do not metastasize with metadiscourse. Canadian Journal of Chemical Engineering, 94(2), 205-208. Lien externe

Patience, G., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 5 - Revise sentences over 30 words long. Canadian Journal of Chemical Engineering, 94(3), 405-407. Lien externe

Patience, G., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 6 - Tell it in the title. Canadian Journal of Chemical Engineering, 94(4), 713-715. Lien externe

Patience, G., Patience, C. A., Boffito, D. C., Patience, P. A., & Bertrand, F. (2016). How do you write and present research well? 7 - Cite to get cited. Canadian Journal of Chemical Engineering, 94(5), 805-808. Lien externe

Patience, G., Srinivisan, B., Perrier, M., Boffito, D. C., & Patience, P. A. (2016). How do you write and present research well? 9 - Show and state what error bars represent. Canadian Journal of Chemical Engineering, 94(7), 1221-1224. Lien externe

Perreault, P., & Patience, G. (2016). Ilmenite-CO reduction kinetics. Fuel, 165, 166-172. Lien externe

Patience, G., & Boffito, D. C. (2016). Method and apparatus for producing chemicals from a methane-containing gas. (Brevet no US9243190). Lien externe

Perreault, P., & Patience, G. (2016). Pyrolusite-CO reduction kinetics. Chemical Engineering Journal, 295, 227-236. Lien externe

Perreault, P., Rifflart, S., Nguyen, E., & Patience, G. (2016). Pyrolusite: An alternative oxygen carrier for chemical looping combustion. Fuel, 185, 630-638. Lien externe

Patience, G., Boffito, D. C., & Patience, P. A. (2016). Response to 'Comment on "How do you write and present research well?"'. Canadian Journal of Chemical Engineering, 94(1), 201-201. Lien externe

Patience, G., Boffito, D. C., & Patience, P. (2015). Communicate Science Papers, Presentations, and Posters Effectively. Non disponible

Patience, G., Boffito, D. C., & Patience, P. A. (2015). How do you write and present research well? The Canadian Journal of Chemical Engineering, 93(10), 1693-1696. Disponible

Patience, G., Boffito, D. C., & Patience, P. A. (2015). How do you write and present research well? 1 - Admit that you did it. Canadian Journal of Chemical Engineering, 93(11), 1889-1890. Lien externe

Patience, P. A., Patience, G., & Boffito, D. C. (2015). How do you write and present research well? 2 - Replace 007 with an explicit agent. Canadian Journal of Chemical Engineering, 93(12), 2095-2097. Lien externe

Patience, G., Shekari, A., & Farrie, Y. (2015). Methods for the valorization of carbohydrates. (Brevet no US9145350). Lien externe

Patience, G., Boffito, D. C., Edake, M., & Neagoe, C. (juin 2013). Biodiesel via catalytic gas phase trans-esterification in a fluidized bed [Communication écrite]. BioEnergy IV : Innovations in Biomass Conversion for Heat, Power, Fuels and Chemicals, Otranto, Italy. Non disponible

Patience, G. (2013). Experimental methods and instrumentation for chemical engineers. Lien externe

Patience, G., Benamer, A., Chiron, F.-X., Shekari, A., & Dubois, J.-L. (2013). Selectively combusting CO in the presence of propylene. Chemical Engineering and Processing : Process Intensification, 70, 162-168. Lien externe

Pirola, C., Bianchi, C., Di Fronzo, A., Boffito, D. C., Di Michele, A., & Patience, G. (avril 2013). Ultrasound and microwave assisted preparation of high Fe loaded supported catalysts for biosyngas Fischer-Tropsch conversion [Communication écrite]. 245th ACS National Meeting and Exposition, New Orleans, Louisiana. Non disponible

Patience, G., Shekari, A., & Farrie, Y. (juillet 2012). Carbosylic acids from sugar syrup [Communication écrite]. International Conference on Advances in Catalysis for Biomass Valorization (CAT4BIO 2012), Thessaloniki, Greece. Non disponible

Perreault, P., Bérard, A., Stainton, H., & Patience, G. (octobre 2012). Kinetic and hydrodynamic modelling of micro-reactors operated as fixed and fluidized beds [Communication écrite]. 62nd Canadian Chemical Engineering Conference, Vancouver, Canada. Non disponible

Perreault, P., Stainton, H., Yazdanpanah, M. M., & Patience, G. (septembre 2012). Kinetic modelling of ilmenite reduction by CO, H2 and CH4 [Communication écrite]. 2nd International Conference on Chemical Looping, Darmstadt, Allemagne. Non disponible

Patience, G., Farrie, Y., Devaux, J.-F., & Dubois, J.-L. (2012). Oxidation Kinetics of Carbon Deposited on Cerium-Doped FePO₄ during Dehydration of Glycerol to Acrolein. Chemical Engineering and Technology, 35(9), 1699-1706. Lien externe

Patience, G., Chiron, F.-X., Chiron, A., Shekari, A., Benamer, A., & Dubois, J.-L. (mai 2012). Selectively combusting CO in the presence of propylene [Communication écrite]. 22ème symposium canadien de catalyse, Québec, Canada. Non disponible

Patience, G., & Karirekinyana, G. (octobre 2011). Catmint Oil as a Strategy to Fight Malaria in Burundi, Africa [Communication écrite]. 61st Canadian Chemical Engineering Conference, London, Ontario. Non disponible

Patience, G., Farrie, Y., Devaux, J.-F., & Dubois, J. L. (octobre 2011). Oxidation kinetics of Ce-doped, FePO4 catalyst coked during glycerol dehydration to acrolein [Communication écrite]. 1st International Congress on Catalysis for Biorefineries (CATBIOR 2011), Málaga, Spain. Non disponible

Patience, G., & Bockrath, R. E. (2010). Butane oxidation process development in a circulating fluidized bed. Applied Catalysis A: General, 376(1), 4-12. Lien externe

Perrault, P., Rifflart, S., & Patience, G. (mars 2010). Ilmenite agglomeration [Communication écrite]. 1st International Conference on Chemical Looping Combustion, Lyon, France. Non disponible

Patience, G., & Bordes-Richard, E. (2010). International VPO Workshop: Preface. Applied Catalysis A: General, 376(1), 1-3. Lien externe

Patience, G., & Bockrath, R. E. (2009). Drift flux modelling of entrained gas-solids suspensions. Powder Technology, 190(3), 415-425. Lien externe

Patience, G., & Bockrath, R. E. (2008). Drift Flux Modelling of CFB Risers. Canadian Journal of Chemical Engineering, 86(3), 458-469. Lien externe

Patience, G., & Cenni, R. (2007). Formaldehyde Process Intensification Through Gas Heat Capacity. Chemical Engineering Science, 62(18-20), 5609-5612. Lien externe

Patience, G., Bockrath, R. E., Sullivan, J. D., & Horowitz, H. S. (2007). Pressure Calcination of VPO Catalyst. Industrial & Engineering Chemistry Research, 46(13), 4374-4381. Lien externe

Patience, G., & Cenni, R. (septembre 2006). Formaldehyde process intensification through gas heat capacity [Communication écrite]. 19 International Symposia on Chemical Reaction Engineering, Potsdam, Germany. Non disponible

Perregaard, J., & Patience, G. (2006). Process for catalytic selective oxidation of a hydrocarbon substrate. (Brevet no US7087801). Lien externe

Patience, G., & Lorences, M. J. (2006). VPO transient oxidation kinetics. International Journal of Chemical Reactor Engineering, 4(A22), 1-16. Lien externe

Patience, G., Lorences, M. J., Cenni, R., Diez, F., & Coco, J. (juillet 2005). Carbon desposition on VPO catalyst [Communication écrite]. ISHHC 12, Florence. Non disponible

Perregaard, J., Santamaria, J., Menendes, M., Mallada, R., Patience, G., Ross, J. R. H., Xue, E., Volta, J.-C., Julbe, A., & Furrusseng, D. (2003). Process for catalytic selective oxidation of a hydrocarbon substrate. (Brevet no US6515146). Lien externe

Patience, G., Chaouki, J., & Berruti, F. (1996). Gas phase hydrodynamics in circulating fluidized bed risers. Dans Cheremisinoff, N. P. (édit.), Multiphase Reactor and Polymerization System Hydrodynamics (255-296). Lien externe

Patience, G., & Chaouki, J. (mai 1995). Solids hydrodynamics in the fully developed region of CFB risers [Communication écrite]. 8th Engineering Foundation Conference on Fluidization, Tours, France. Non disponible

Patience, G., & Mills, P. L. (1994). Modelling of propylene oxidation in a circulating fluidized-bed reactor. Studies in Surface Science and Catalysis, 82, 18 pages. Lien externe

Patience, G., & Chaouki, J. (1993). Gas phase hydrodynamics in the riser of a circulating fluidized bed. Chemical Engineering Science, 48(18), 3195-3205. Lien externe

Pugsley, T. S., Berruti, F., Godfroy, L., Chaouki, J., & Patience, G. (janvier 1993). A predictive model for the gas-solid flow structure in circulating fluidized bed risers [Communication écrite]. 4th International Conference on Circulating Fluidized Beds, Hidden Valley, PA. Non disponible

Pugsley, T. S., Patience, G., Berruti, F., & Chaouki, J. (1992). Modeling the catalytic oxidation of n-butane to maleic anhydride in a circulating fluidized bed reactor. Industrial & Engineering Chemistry Research, 31(12), 2652-2660. Lien externe

Patience, G., & Mehrotra, A. K. (1992). Reply to Andersson and Kristoffersen. Canadian Journal of Chemical Engineering, 70(1), 205-206. Lien externe

Patience, G., Chaouki, J., Berruti, F., & Wong, R. (1992). Scaling considerations for circulating fluidized bed risers. Powder Technology, 72(1), 31-37. Lien externe

Patience, G. (1990). Circulating fluidized beds : hydrodynamics and reactor modelling [Thèse de doctorat, École Polytechnique de Montréal]. Non disponible

Patience, G., & Mehrotra, A. K. (1990). Combined thermal-momentum start-up in long pipes. International Journal of Heat and Mass Transfer, 33(9), 2051-2053. Lien externe

Patience, G., Chaouki, J., & Kennedy, G. (octobre 1990). Solids residence time distribution in CFB reactors [Communication écrite]. 3rd International Conference on Circulating Fluidized Beds Technology, Nagoya, Japan. Non disponible

Patience, G., & Chaouki, J. (1990). Vertical voidage profiles in CFB risers. Chemical Engineering Research & Design, 68(A3), 301-302. Non disponible

Patience, G., & Mehrotra, A. K. (1989). Laminar start-up flow in short pipe lengths. Canadian Journal of Chemical Engineering, 67(6), 883-888. Lien externe

Patience, G., & Mehrotra, A. K. (1987). Discussion: Laminar start-up flow in a pipe. Journal of Applied Mechanics, 54(1), 243-244. Lien externe

Patience, G. (1987). Numerical solutions for laminar forced convection and fluid flow in pipes [Mémoire de maîtrise, University of Calgary]. Non disponible

R

Roso, M., Cerclé, C., Patience, G., & Ajji, A. (2021). Experimental Methods in Chemical Engineering: Barrier properties. Canadian Journal of Chemical Engineering, 99(5), 1068-1081. Lien externe

Rigamonti, M. G., Chavalle, M., Li, H., Antitomaso, P., Hadidi, L., Stucchi, M., Galli, F., Khan, H., Dolle, M., Boffito, D. C., & Patience, G. (2020). LiFePO₄ spray drying scale-up and carbon-cage for improved cyclability. Journal of Power Sources, 462, 228103 (12 pages). Lien externe

Rivas, D. F., Boffito, D. C., Faria-Albanese, J., Glassey, J., Cantin, J., Afraz, N., Akse, H., Boodhoo, K. V. K., Bos, R., Chiang, Y. W., Commenge, J. M., Dubois, J. L., Galli, F., Harmsen, J., Kalra, S., Keil, F., Morales-Menendez, R., Navarro-Brull, F. J., Noel, T., ... Weber, R. S. (2020). Process intensification education contributes to sustainable development goals. Part 2. Education for Chemical Engineers, 32, 15-24. Lien externe

Rigamonti, M. G., Gatti, F. G., & Patience, G. (2019). Experimental methods in chemical engineering: Nuclear magnetic resonance. Canadian Journal of Chemical Engineering, 97(3), 628-635. Lien externe

Rigamonti, M. G., Song, Y.-X., Li, H., Saadatkhah, N., Sauriol, P., & Patience, G. (2019). Influence of atomization conditions on spray drying Lithium Iron Phosphate nanoparticle suspensions. Canadian Journal of Chemical Engineering, 97(8), 2251-2258. Lien externe

Rocha, F. S., Gomes, A. J., Lunardi, C. N., Kaliaguine, S., & Patience, G. (2018). Experimental methods in chemical engineering: Ultraviolet visible spectroscopy - UV-Vis. Canadian Journal of Chemical Engineering, 96(12), 2512-2517. Lien externe

Rifflart, S., Patience, G., & Chiron, F. X. (2015). Method for producing synthesis gases. (Brevet no US8974699). Lien externe

Rostamizadeh, M., Boffito, D. C., Patience, G., & Taeb, A. (2014). Neural network modeling of methanol to propylene over P-ZSM-5 in a fluidized bed. Journal of Chemical and Process Engineering, 1(2), 8 pages. Lien externe

Ramos, R., Pina, M. P., Menéndez, M., Santamaría, J., & Patience, G. (2010). Oxidative dehydrogenation of propane to propene, 1: Kinetic study on V/MgO. Canadian Journal of Chemical Engineering, 79(6), 891-901. Lien externe

Ramos, R., Pina, M. P., Menéndez, M., Santamaría, J., & Patience, G. (2010). Oxidative dehydrogenation of propane to propene, 2: Simulation of a commercial inert membrane reactor immersed in a fluidized bed. Canadian Journal of Chemical Engineering, 79(6), 902-912. Lien externe

Raffi Sereshki, B., Balan, S.-J., Patience, G., & Dubois, J.-L. (août 2009). Reactive vaporization of crude glycerol in a fluidized bed reactor [Communication écrite]. 8th World Congress of Chemical Engineering, Montréal, Québec. Non disponible

S

Song, Y.-X., Furtos, A., Fuoco, D., Boumghar, Y., & Patience, G. (2023). Meta-analysis and review of cannabinoids extraction and purification techniques. Canadian Journal of Chemical Engineering, 24 pages. Lien externe

Shabanian, J., Patience, G., & Chaouki, J. (2021). Case study III: Methanol to olefins. Dans Chaouki, J., & Sotudeh-Gharebagh, R. (édit.), Scale-Up Processes: Iterative Methods for the Chemical, Mineral and Biological Industries (191-220). Lien externe

Schieppati, D., Patience, N. A., Campisi, S., & Patience, G. (2021). Experimental methods in chemical engineering: High performance liquid chromatography—HPLC. Canadian Journal of Chemical Engineering, 99(8), 1663-1682. Lien externe

Sharifian, M., Rossi, F., Galli, F., & Patience, G. (mai 2021). The role of operating parametrs on the performance of the catalytic high temperature fischer-tropsch synthesis in fluidized bed reactor [Communication écrite]. 13th International Conference on Fluidized Bed Technology (CFB 2021), Vancouver, BC, Canada. Non disponible

Saadatkhah, N., Carillo Garcia, A., Ackermann, S., Leclerc, P., Latifi, M., Samih, S., Patience, G., & Chaouki, J. (2020). Experimental methods in chemical engineering: Thermogravimetric analysis-TGA. Canadian Journal of Chemical Engineering, 98(1), 34-43. Lien externe

Sauriol, P., Li, D., Hadidi, L., Villazon, H., Jin, L., Yari, B., Gauthier, M., Dolle, M., Chartrand, P., Kasprzak, W., Liang, G., & Patience, G. (2019). Fe³⁺ reduction during melt-synthesis of LiFePO₄. Canadian Journal of Chemical Engineering, 97(8), 2196-2210. Lien externe

Saadatkhah, N., Aghamiri, S., Talaie, M. R., & Patience, G. (2019). Flame-Assisted Spray Pyrolysis of Lithium and Manganese Precursors to Polycrystalline LiMn₂O₄. Canadian Journal of Chemical Engineering, 97(8), 2299-2308. Lien externe

Saadatkhah, N., Aghamiri, S., Talaie, M. R., & Patience, G. (2018). Flame-assisted spray pyrolysis to size-controlled LiyAlxMn2-xO4: A supervised machine learning approach. CrystEngComm, 20(46), 7590-7601. Lien externe

Saadatkhah, N., Rigamonti, M. G., Boffito, D. C., Li, H., & Patience, G. (mai 2016). Spray dried SiO₂ WO₃/TiO₂ and SiO₂ vanadium pyrophosphate core-shell catalysts [Communication écrite]. 15th International Conference on Fluidization, Montebello, Québec. Publié dans Powder Technology, 316. Lien externe

Saadatkhah, N., Patience, G., Boffito, D. C., Rigamonti, M. G., Aghamiri, S.F., & Talaie, M. R. (mai 2016). Catalyst preparation for fluidized bed reactors by spray drying [Communication écrite]. Fluidization XV, Montebello, Canada. Lien externe

Shekari, A., & Patience, G. (2013). Transient kinetics of n-butane partial oxidation at elevated pressure. Canadian Journal of Chemical Engineering, 91(2), 291-301. Lien externe

Sauriol, P., Patience, G., Sanaei, S., & Bockrath, R. E. (octobre 2012). Gas and solid hydrodynamics of pilot- and commercial-scale CFB using radiotracers [Communication écrite]. 62nd Canadian Chemical Engineering Conference, Vancouver, Canada. Non disponible

Shekari, A., & Patience, G. (2012). Transient redox activity of vanadyl pyrophosphate at ambient and elevated pressure. International Journal of Chemical Reactor Engineering, 10(1), 31 pages. Lien externe

Skekari, A., & Patience, G. (octobre 2011). n-Butane partial oxidation to maleic anhydride : a global transientkinetic model [Communication écrite]. 61st Canadian Chemical Engineering Conference, London, Ontario. Non disponible

Shekari, A., Patience, G., & Bockrath, R. E. (2010). Effect of feed nozzle configuration on n-butane to maleic anhydride yield: From lab scale to commercial. Applied Catalysis A: General, 376(1), 83-90. Lien externe

Shekari, A., & Patience, G. (2010). Maleic Anhydride Yield During Cyclic N-Butane/Oxygen Operation. Catalysis Today, 157(1-4), 334-338. Lien externe

Sereshki, B. R., Balan, S.-J., Patience, G., & Dubois, J.-L. (2010). Reactive vaporization of crude glycerol in a fluidized bed reactor. Industrial and Engineering Chemistry Research, 49(3), 1050-1056. Lien externe

Shekari, A., & Patience, G. (mai 2010). Transient kinetics of n-butane partial oxidation at high pressure [Communication écrite]. 21th CSC, Kingston. Non disponible

Shekari, A., Patience, G., & Bockrath, R. E. (juin 2009). Effect of feed configuration on n-butane to maleic anhydride yield: from lab scale to commercial [Communication écrite]. 21st North American Catalysis Society Meeting (NAM21), San Fran­cisco, Calif. (1 pages). Lien externe

Shekari, A., & Patience, G. (juillet 2009). Effect of oxidation time on maleic anhydride production rate during redox operations [Communication écrite]. 6th World Congress of Catalysis, Lille, France. Lien externe

Shekari, A., & Patience, G. (octobre 2008). Effect of VPO regeneration time on n-butane to maleic anhydride yield under redox operations [Communication écrite]. 58th Canadian Chemical Engineering Conference (CSchE), Ottawa. Non disponible

Shekari, A., Hansen, K. M. S., Fankem, C., Tzakova, T., & Patience, G. (juin 2007). VPO calcination : What are the optimum conditions [Communication écrite]. 20th North American Meeting on Catalysis, Houston. Lien externe

Shekari, A., Hansen, K. M. S., Fankem, C., Tzakova, T., & Patience, G. (octobre 2006). Thermogravimetric analysis of VPO calcination [Communication écrite]. 56th Canadian Chemical Engineering Conference, Sherbrooke, QC. Non disponible

T

Tavares, J. R., Boffito, D. C., Patience, P. A., & Patience, G. (2016). How do you write and present research well? 15-Prepare to say less than you prepare. Canadian Journal of Chemical Engineering, 94(10), 1834-1837. Disponible

Trevisanut, C., Jazayeri, S. M., Bonkane, S., Neagoe, C., Mohamadalizadeh, A., Boffito, D. C., Bianchi, C. L., Pirola, C., Visconti, C. G., Lietti, L., Abatzoglou, N., Frost, L., Lerou, J., Green, W., & Patience, G. (2016). Micro-syngas technology options for GtL. Canadian Journal of Chemical Engineering, 94(4), 613-622. Lien externe

Thon, A., Puttmann, A., Hartge, E.-U., Heinrich, S., Werther, J., Patience, G., & Bockrath, R. E. (2011). Simulation of catalyst loss from an industrial fluidized bed reactor on the basis of labscale attrition tests. Powder Technology, 214(1), 21-30. Lien externe

Thon, A., Püttmann, A., Hartge, E.-U., Heinrich, S., Werther, J., Patience, G., & Bockrath, R. E. (mai 2010). Prediction of catalyst attrition in an industrial fluidized bed plant based on labscale attrition tests [Communication écrite]. Fluidization XIII, Korea. Lien externe

V

Van Hoecke, L., Boeye, D., Gonzalez-Quiroga, A., Patience, G., & Perreault, P. (2022). Experimental methods in chemical engineering: Computational fluid dynamics/finite volume method-CFD/FVM. Canadian Journal of Chemical Engineering, 17 pages. Lien externe

Villasana, Y., Moradi, N., Navas-Cardenas, C., & Patience, G. (2022). Experimental methods in chemical engineering: pH. Canadian Journal of Chemical Engineering, 15 pages. Lien externe

W

Wu, K., Galli, F., de Tommaso, J., Patience, G., & van Ommen, J. R. (2022). Experimental methods in chemical engineering: Pressure. Canadian Journal of Chemical Engineering, 18 pages. Lien externe

Z

Zhuang, Y., Saadatkhah, N., Morgani, M. S., Xu, T., Martin, C., Patience, G., & Ajji, A. (2022). Experimental methods in chemical engineering: Reactive extrusion. Canadian Journal of Chemical Engineering, 19 pages. Lien externe

Liste produite: Thu Jun 8 03:48:35 2023 EDT.