Documents dont l'auteur est "Miao, H. Y."

G

Gariépy, A., Miao, H. Y., & Lévesque, M. (2017). Simulation of the shot peening process with variable shot diameters and impacting velocities. Advances in Engineering Software, 114, 121-133. Lien externe

Gariépy, A., Miao, H. Y., & Lévesque, M. (2014). Peen forming. Dans Hashmi, S. (édit.), Comprehensive Materials Processing. Volume 3, Advanced Forming Technologies (295-329). Lien externe

K

Klotz, T., Delbergue, D., Miao, H. Y., Bocher, P., Lévesque, M., & Brochu, M. (septembre 2017). Analytical fatigue life prediction of shot peened Inconel 718 [Présentation]. Dans 13th International Conference on Shot Peening, Montréal, Québec. Lien externe

L

Lévesque, M., Miao, H. Y., Gariepy, A., & Levers, A. (septembre 2014). Prediction of shot peen forming through direct finite element simulation [Communication écrite]. 12th International Conference on Shot Peening, Goslar, Germany. Lien externe

M

Miao, H. Y., Canals, L., McGilivray, B., & Lévesque, M. (septembre 2017). Comparison between vibratory peening and shot peening process [Présentation]. Dans 13th International Conference of Shot Peening, Montréal, Québec. Lien externe

Miao, H. Y., Méndez, J., Forgues, S., & Lévesque, M. (septembre 2017). Experimental and numerical study of needle peening effects in aluminum alloy 2024-T3 sheets [Présentation]. Dans 13th International Conference of Shot Peening, Montréal, Québec. Lien externe

Miao, H. Y., & Lévesque, M. (2017). Fatigue life improvement on AA7050 by vibratory peening and shot peening. (Rapport technique). Non disponible

Miao, H. Y., Klotz, T., Delbergue, D., & Lévesque, M. (septembre 2017). Finite element simulation of shot peened residual stress relaxation under low and high cycle loading [Présentation]. Dans 13th International Conference of Shot Peening, Montréal, Québec. Lien externe

Miao, H. Y., & Lévesque, M. (2016). Literature review on three warm surface treatment processes : warm shot peening, warm laser shock peening and warm deep rolling. (Rapport technique). Non disponible

Mann, P., Miao, H. Y., Gariepy, A., Lévesque, M., & Chromik, R. R. (2015). Residual stress near single shot peening impingements determined by nanoindentation and numerical simulations. Journal of Materials Science, 50(5), 2284-2297. Lien externe

Miao, H. Y., Lebon, R., Lévesque, M., & Bocher, P. (septembre 2014). Residual stress measurement correction on shot peened AA2024 by finite element analysis [Communication écrite]. 12th International Conference on Shot Peening, Goslar, Germany. Lien externe

Miao, H. Y., Gariepy, A., & Lévesque, M. (2013). Peen forming simulation of an A320 bottom wing skin panel #1. (Rapport technique). Non disponible

Miao, H. Y., & Lévesque, M. (novembre 2012). Shot peening for fatigue life improvement and forming of aerospace structures [Communication écrite]. Research and Innovation for Transport Systems of the Future (RITF 2012), Paris, France. Non disponible

Miao, H. Y., & Lévesque, M. (septembre 2011). Effect of shot peening on the fatigue life and crack propagation prediction with experiments and Navarro-Rios Model [Communication écrite]. 11th International Conference of Shot Peening (ICSP 2011), South Bend, Indiana, USA. Lien externe

Miao, H. Y., & Lévesque, M. (avril 2011). Experimental study and numerical simulation of the stress peen forming process [Communication écrite]. 58th CASI Aeronautics Conference (AERO 2011), Montréal, Québec. Non disponible

Miao, H. Y., & Lévesque, M. (août 2011). Experimental study of shot peening and stress peen forming [Communication écrite]. EPS Montréal International Conference on Advanced Materials and Processing 2011, Montréal, Québec. Non disponible

Miao, H. Y., & Lévesque, M. (avril 2011). Numerical models for the optimization of the fatigue life improvement by the shot peening process [Communication écrite]. 58th CASI Aeronautics Conference (AERO 2011), Montréal, Québec. Non disponible

Miao, H. Y., Larose, S., Perron, C., & Lévesque, M. (2011). Numerical simulation of the stress peen forming process and experimental validation. Advances in Engineering Software, 42(11), 963-975. Lien externe

Miao, H. Y., & Lévesque, M. (septembre 2011). On the potential application of a numerical optimization of fatigue life with DoE and FEM [Communication écrite]. 11th International Conference of Shot Peening (ICSP 2011), South Bend, Indiana, USA. Lien externe

Miao, H. Y., Larose, S., Perron, C., & Lévesque, M. (2010). An analytical approach to relate shot peening parameters to Almen intensity. Surface and Coatings Technology, 205(7), 2055-2066. Lien externe

Miao, H. Y., Demers, D., Larose, S., Perron, C., & Lévesque, M. (2010). Experimental study of shot peening and stress peen forming. Journal of Materials Processing Technology, 210(15), 2089-2102. Lien externe

Miao, H. Y., Perron, C., & Lévesque, M. (mai 2009). Finite element simulation and experimental study of stress peen forming process [Communication écrite]. CASI Aircraft Design and Development Symposium, Kanata, Canada. Non disponible

Miao, H. Y., Larose, S., Perron, C., & Lévesque, M. (2009). On the potential applications of a 3D random finite element model for the simulation of shot peening. Advances in Engineering Software, 40(10), 1023-1038. Lien externe

Miao, H. Y., Perron, C., & Lévesque, M. (septembre 2008). Finite element simulation of shot peening and stress peen forming [Communication écrite]. 10th International Conference on Shot Peening, Tokyo, Japan. Lien externe

Miao, H. Y., Lévesque, M., Perron, C., & Larose, S. (septembre 2007). 3D random finite element model for shop peening process [Communication écrite]. SAE AeroTech Congress and Exhibition (AEROTECH 2007), Los Angeles, California. Non disponible

Miao, H. Y., Larose, S., Lévesque, M., & Perron, C. (avril 2007). Finite element models of shot peening processes [Communication écrite]. CASI Aero 2007, Toronto, Canada. Non disponible