<  Back to the Polytechnique Montréal portal

Items where Author is "Huneault, Michel A"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | B | M | R | S | T
Number of items: 15.

A

Arroyo, O. H., Huneault, M. A., Favis, B. D., & Bureau, M. (2010). Processing and properties of PLA/Thermoplastic starch/Montmorillonite nanocomposites. Polymer Composites, 31(1), 114-127. External link

B

Bhadane, P. A., Champagne, M. F., Huneault, M. A., Tofan, F., & Favis, B. D. (2006). Continuity Development in Polymer Blends of Very Low Interfacial Tension. Polymer, 47(8), 2760-2771. External link

Bhadane, P. A., Virgilio, N., Favis, B. D., Champagne, M. F., Huneault, M. A., & Tofan, F. (2006). Effect of Dynamic Vulcanization on Co-Continuous Morphology. AICHE Journal, 52(10), 3411-3420. External link

Bhadane, P. A., Champagne, M. F., Huneault, M. A., Tofan, F., & Favis, B. D. (2006). Erosion-dependant continuity development in high viscosity ratio blends of very low interfacial tension. Journal of polymer science. Part B, Polymer physics, 44(14), 1919-1929. External link

Bhadane, P., Favis, B. D., Huneault, M. A., Champagne, M., & Tofan, F. (2005, May). Erosion and continuity development in high viscosity ratio epdm/pp blends [Paper]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. External link

M

Mihai, M., Huneault, M. A., & Favis, B. D. (2010). Rheology and extrusion foaming of chain-branched poly(lactic acid). Polymer Engineering and Science, 50(3), 629-642. External link

Mihai, M., Huneault, M. A., Favis, B. D., & Li, H. B. (2007). Extrusion Foaming of Semi-Crystalline Pla and Pla/Thermoplastic Starch Blends. Macromolecular Bioscience, 7(7), 907-920. External link

Mihai, M., Huneault, M. A., & Favis, B. D. (2007). Foaming of Polystyrene/Thermoplastic Starch Blends. Journal of Cellular Plastics, 43(3), 215-236. External link

Mighri, F., & Huneault, M. A. (2006). In situ visualization of drop deformation, erosion, and breakup in high viscosity ratio polymeric systems under high shearing stress conditions. Journal of Applied Polymer Science, 100(4), 2582-2591. External link

Mokrini, A., Huneault, M. A., & Gerard, P. (2006). Partially fluorinated proton exchange membranes based on PVDF-SEBS blends compatibilized with methylmethacrylate block copolymers. Journal of Membrane Science, 283(1-2), 74-83. External link

Mokrini, A., & Huneault, M. A. (2006). Proton Exchange Membranes Based on PVDF/SEBS Blends. Journal of Power Sources, 154(1), 51-58. External link

R

Reignier, J., & Huneault, M. A. (2006). Preparation of interconnected poly (e-caprolactone) porous scaffolds by a combination of polymer and salt particulate leaching. Polymer, 47(13), 4703-4717. External link

S

Sarazin, P., Huneault, M. A., Orts, W., & Favis, B. D. (2005, May). Blends of polylactide with thermoplastic starch [Paper]. ANTEC 2005. 63rd SPE Annual conference, Boston, Mass., USA. External link

T

Tchomakov, K. P., Favis, B. D., Huneault, M. A., Champagne, M. F., & Tofan, F. (2005). Mechanical Properties and Morphology of Ternary Pp/Epdm/Pe Blends. Canadian Journal of Chemical Engineering, 83(2), 300-309. External link

Tchomakov, K. P., Favis, B. D., Huneault, M. A., Champagne, M. F., & Tofan, F. (2004). Composite droplets with core/shell morphologies prepared from HDPE/PS/PMMA ternary blends by twin-screw extrusion. Polymer Engineering and Science, 44(4), 749-759. External link

List generated on: Sun Jun 23 21:57:29 2024 EDT