<  Back to the Polytechnique Montréal portal

Items of type "Article"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items: 906.

A

Abadias, G., Chason, E., Keckes, J., Sebastiani, M., Thompson, G. B., Barthel, E., ... Martinu, L. (2018). Stress in thin films and coatings: current status, challenges, and prospects. Journal of Vacuum Science & Technology A, 36(2).

Abbasi, H., Ezzati-Jivan, N., Bellaïche, M., Talhi, C. & Dagenais, M. R. (2019). Machine learning-based EDoS attack detection technique using execution trace analysis. Journal of Hardware and Systems Security, 3(2), p. 164-176.

Abd Elaal, M. & Ghannouchi, F. (2007). A2×1LINC transceiver for enhanced power transmission in wireless systems. Research Letters in Communications, 2007, p. 1-4.

Abdali, H. & Ajji, A. (2017). Preparation of electrospun nanocomposite nanofibers of polyaniline/poly(methyl methacrylate) with amino-functionalized graphene. Polymers, 9(9).

Abdalrhman, A. S., Wang, C., Manalac, A., Weersink, M., Yassine, A.‐.A., Betz, V., ... Hofmann, R. (2021). Modeling the efficiency of UV at 254 nm for disinfecting the different layers within N95 respirators. Journal of Biophotonics, 14(10), p. 1-10.

Abdulla, A., Schell, K. R. & Schell, M. C. (2020). Comparing the Evolution of Risk Culture in Radiation Oncology, Aviation, and Nuclear Power. Journal of Patient Safety, 16(4), e352-e358.

Abernathy, M., Amato, A., Ananyeva, A., Angelova, S., Baloukas, B., Bassiri, R., ... Yang, L. (2021). Exploration of co-sputtered Ta₂O₅–ZrO₂ thin films for gravitational-wave detectors. Classical and Quantum Gravity, 38(19).

Abobakr, S. A., Sadid, W. H. & Zhu, G. (2018). Game-theoretic decentralized model predictive control of thermal appliances in discrete-event systems framework. IEEE Transactions on Industrial Electronics, 65(8), p. 6446-6456.

Abondo, C. & Pierre, S. (2005). Dynamic location and forwarding pointers for mobility management. Mobile Information Systems, 1, p. 3-24.

Abou-Abbas, L., Tadj, C., Gargour, C. & Montazeri, L. (2017). Expiratory and inspiratory cries detection using different signals' decomposition techniques. Journal of Voice, 31(2), 259.E13-259.E28.

Aboulfadl, K., De Potter, C., Prévost, M. & Sauvé, S. (2010). Time-dependent integrity during storage of natural surface water samples for the trace analysis of pharmaceutical products, feminizing hormones and pesticides. Chemistry Central Journal, 4.

Abrignani, M. D., Giupponi, L., Lodi, A. & Verdone, R. (2018). Scheduling M2M traffic over LTE uplink of a dense small cell network. EURASIP Journal on Wireless Communications and Networking, 2018(1).

Abusitta, A., Bellaïche, M. & Dagenais, M. R. (2018). An SVM-based framework for detecting DoS attacks in virtualized clouds under changing environment. Journal of Cloud Computing : Advances, Systems and Applications, 7(9).

Aceves, M. C. & Fuamba, M. (2016). Methodology for selecting Best Management Practices integrating multiple stakeholders and criteria. Part 1: methodology. Water, 8(2), p. 1-14.

Aceves, M. C. & Fuamba, M. (2016). Methodology for selecting Best Management Practices integrating multiple stakeholders and criteria. Part 2: case study. Water, 8(2), p. 1-19.

Achouri, K. & Caloz, C. (2018). Design, concepts, and applications of electromagnetic metasurfaces. Nanophotonics, 7(6), p. 1095-1116.

Achouri, K. & Caloz, C. (2018). Design, concepts, and applications of electromagnetic metasurfaces. Nanophotonics, 7(6), p. 1095-1116.

Achouri, K. & Caloz, C. (2018). Space-wave routing via surface waves using a metasurface system. Scientific Reports, 8.

Achouri, K., Khan, B. A., Gupta, S., Lavigne, G., Salem, M. A. & Caloz, C. (2016). Synthesis of electromagnetic metasurfaces: principles and illustrations. EPJ Applied Metamaterials, 2.

Acquaroli, L. N., Newby, P., Santato, C. & Peter, Y.-A. (2016). Thermal properties of methyltrimethoxysilane aerogel thin films. AIP Advances, 6(10).

Adegbindin, M., Hertz, A. & Bellaïche, M. (2016). A new efficient RLF-like algorithm for the vertex coloring problem. Yugoslav Journal of Operations Research, 26(4), p. 441-456.

Adrien Rimélé, M., Dimitrakopoulos, R. & Gamache, M. (2018). A stochastic optimization method with in-pit waste and tailings disposal for open pit life-of-mine production planning. Resources, 57, p. 112-121.

Agez, M., Majeau-Bettez, G., Margni, M., Strømman, A. H. & Samson, R. (2020). Lifting the veil on the correction of double counting incidents in hybrid life cycle assessment. Journal of Industrial Ecology, 24(3), p. 517-533.

Agez, M., Muller, E., Patouillard, L., Södersten, C.‐.J. H., Arvesen, A., Margni, M., ... Majeau-Bettez, G. (2022). Correcting remaining truncations in hybrid life cycle assessment database compilation. Journal of Industrial Ecology, 26(1), p. 121-133.

Agez, M., Wood, R., Margni, M., Strømman, A. H., Samson, R. & Majeau-Bettez, G. (2020). Hybridization of complete PLCA and MRIO databases for a comprehensive product system coverage. Journal of Industrial Ecology, 24(4), p. 774-790.

Aïssa, B., Haddad, E., Jamroz, W., Hassani, S., Farahani, R. D., Merle, P. G. & Therriault, D. (2012). Micromechanical characterization of single-walled carbon nanotube reinforced ethylidene norbornene nanocomposites for self-healing applications. Smart Materials and Structures, 21(10).

Aïssa, B., Nedil, M., Esam, A. H., Tabet, N., Therriault, D. & Rosei, F. (2012). Ambipolar operation of hybrid SiC-carbon nanotube based thin film transistors for logic circuits applications. Applied Physics Letters, 101(4).

Aïssa, B., Nedil, M., Habib, M. A., Haddad, E., Jamroz, W., Therriault, D., ... Rosei, F. (2013). Fluidic patch antenna based on liquid metal alloy/single-wall carbon-nanotubes operating at the S-band frequency. Applied Physics Letters, 103(6).

Aïssa, B., Therriault, D., Farahani, R. D., Laberge Lebel, L. & El Khakani, M. A. (2012). Electrical transport properties of single wall carbon nanotube/polyurethane composite based field effect transistors fabricated by UV-assisted direct-writing technology. Nanotechnology, 23(11).

Aïssa, B., Therriault, D., Haddad, E. & Jamroz, W. (2012). Self-Healing Materials Systems: Overview of Major Approaches and Recent Developed Technologies. Advances in Materials Science and Engineering, 2012, p. 1-17.

Ajao, O., Rahni, M., Marinova, M., Chadjaa, H. & Savadogo, O. (2017). Study of separation and fouling of reverse osmosis membranes during model hydrolysate solution filtration. Membranes, 7(4).

Al Salman, J.M., Hani, S., de Marcellis-Warin, N. & Isa, S. F. (2015). Effectiveness of an electronic hand hygiene monitoring system on healthcare workers' compliance to guidelines. Journal of Infection and Public Health, 8(2), p. 117-126.

Alandzi, V. & Quintero, A. (2007). Proximity aware routing in ad hoc networks. Journal of Computer Science, 3(7), p. 533-539.

Alborzi, A., Mirchi, A., Moftakhari, H., Mallakpour, I., Alian, S., Nazemi, A., ... AghaKouchak, A. (2018). Climate-informed environmental inflows to revive a drying lake facing meteorological and anthropogenic droughts. Environmental Research Letters, 13(8).

Ali, H., Ahmed, S., Al-Naffouri, T. Y., Sharawi, M. S. & Alouini, M.-S. (2017). Target parameter estimation for spatial and temporal formulations in MIMO radars using compressive sensing. EURASIP Journal on Advances in Signal Processing, 2017.

Alimi, O. S., Claveau-Mallet, D., Kurusu, R. S., Lapointe, M., Bayen, S. & Tufenkji, N. (2022). Weathering pathways and protocols for environmentally relevant microplastics and nanoplastics: What are we missing? Journal of Hazardous Materials, 423(A), p. 1-14. Item availablity restricted.

Alizadeh, S., Abdul Rahim, A., Guo, B., Hawari, J., Ghoshal, S. & Comeau, Y. (2019). Impacts of Continuous Inflow of Low Concentrations of Silver Nanoparticles on Biological Performance and Microbial Communities of Aerobic Heterotrophic Wastewater Biofilm. Environmental Science & Technology, 53(15), p. 9148-9159.

Alizadeh, S., Ghoshal, S. & Comeau, Y. (2019). Fate and inhibitory effect of silver nanoparticles in high rate moving bed biofilm reactors. Science of Total Environment, 647, p. 1199-1210.

Allard-Massicotte, R., Chadjaa, H. & Marinova, M. (2017). Phenols removal from hemicelluloses pre-hydrolysate by laccase to improve butanol production. Fermentation, 3(3).

Allée, G., Pierre, S., Glitho, R. H. & El Rhazi, A. (2005). An improved itinerary recording protocol for securing distributed architectures based on mobile agents. Mobile Information Systems, 1, p. 129-147.

Allet, A. & Paraschivoiu, I. (1995). Viscous flow and dynamic stall effects on vertical-axis wind turbines. International Journal of Rotating Machinery, 2(1), p. 1-14.

Almuhtaram, H., Cui, Y., Zamyadi, A. & Hofmann, R. (2018). Cyanotoxins and cyanobacteria cell accumulations in drinking water treatment plants with a low risk of bloom formation at the source. Toxins, 10(11), p. 1-15.

Aloise, D. & Contardo, C. (2018). A sampling-based exact algorithm for the solution of the minimax diameter clustering problem. Journal of Global Optimization, 71(3), p. 613-630.

AlQasimi, E. & Mahdi, T.-F. (2020). Discussion of "Consequences of dike breaches and dike overflow in a bifurcating river system" by Anouk Bomers, Ralph M. J. Schielen and Suzanne J. M. H. Hulscher. Natural Hazards, 103(2), p. 1629-1632.

AlQasimi, E. & Mahdi, T.-F. (2019). Flooding of the Saguenay region in 1996. Part 1: Modeling River Ha! Ha! flooding. Natural Hazards, 96(1).

AlQasimi, E. & Mahdi, T.-F. (2020). A new one-dimensional numerical model for unsteady hydraulics of sediments in rivers. SN Applied Sciences, 2(9), p. 1480.

AlQasimi, E., Pelletier, P. & Mahdi, T.-F. (2019). Flooding of the Saguenay region in 1996. Part 2: Aux Sables River flood mitigation and environmental impact assessment. Natural Hazards, 96(1), p. 17-32.

Alzahrani, M. M., Anam, E. A., Makhdom, A. M., Villemure, I. & Hamdy, R. C. (2014). The effect of altering the mechanical loading environment on the expression of bone regenerating molecules in cases of distraction osteogenesis. Frontiers in Endocrinology, 5.

Amiot, S., Jerbi, A., Lachapelle-Trouillard, X., Frédette, C., Labrecque, M. & Comeau, Y. (2020). Optimization of the wastewater treatment capacity of a short rotation willow coppice vegetation filter. Ecological Engineering, 158.

Amiri, M., Pouliot, P., Bonnéry, C., Leclerc, P.-O., Desjardins, M., Lesage, F. & Joanette, Y. (2014). An exploration of the effect of hemodynamic changes due to normal aging on the fNIRS response to semantic processing of words. Frontiers in Neurology, 5.

Andica, C., Hagiwara, A., Kamagata, K., Yokoyama, K., Shimoji, K., Saito, A., ... Aoki, S. (2019). Gray matter alterations in early and late relapsing-remitting multiple sclerosis evaluated with synthetic quantitative magnetic resonance imaging. Scientific Reports, 9(1), p. 8147-8156.

André, M., Pesant, G. & Pierre, S. (2005). A variable neighborhood search algorithm for assigning cells to switches in wireless networks. Journal of Computer Science, 1(2), p. 175-181.

Andriessen, E. M.M.A., Wilson, A. M., Mawambo, G., Dejda, A., Miloudi, K., Sennlaub, F. & Sapieha, P. (2016). Gut microbiota influences pathological angiogenesis in obesity‐driven choroidal neovascularization. EMBO Molecular Medicine, 8(12), p. 1366.

Antar, E. & Robert, É. (2021). Thermodynamic analysis of novel methanol polygeneration systems for greenhouses. Biomass Conversion and Biorefinery.

Appio, F. P., Achiche, S., Martini, A. & Beaudry, C. (2017). On designers’ use of biomimicry tools during the new product development process: an empirical investigation. Technology Analysis & Strategic Management, p. 1-15.

Arab, H., Dufour, S., Moldovan, E., Akyel, C. & Tatu, S. O. (2018). A 77-GHz six-port sensor for accurate near-field displacement and doppler measurements. Sensors, 18(8), p. 1-19.

Ardila, N., Daigle, F., Heuzey, M.-C. & Ajji, A. (2017). Antibacterial activity of neat chitosan powder and flakes. Molecules, 22(1), p. 1-19.

Arguin, M., Sirois, F. & Therriault, D. (2015). Electric field induced alignment of multiwalled carbon nanotubes in polymers and multiscale composites. Advanced Manufacturing: Polymer & Composites Science, 1(1), p. 16-25.

Arkoun, M., Daigle, F., Heuzey, M.-C. & Ajji, A. (2017). Antibacterial electrospun chitosan-based nanofibers: A bacterial membrane perforator. Food Science & Nutrition, 5(4), p. 865-874.

Arkoun, M., Daigle, F., Heuzey, M.-C. & Ajji, A. (2017). Mechanism of action of electrospun chitosan-based nanofibers against meat spoilage and pathogenic bacteria. Molecules, 22(4).

Armand, P. & Orban, D. (2012). The squared slacks transformation in nonlinear programming. SQU Journal for Science, 17(1), p. 22-29.

Armellini, F., Kaminski, P. C. & Beaudry, C. (2014). The Open Innovation Journey in Emerging Economies: An Analysis of the Brazilian Aerospace Industry. Journal of Aerospace Technology and Management, 6(4), p. 462-474.

Arnold, E., Hammami, I., Chen, J., Gupte, S., Durocher, Y. & Jolicoeur, M. (2016). Overexpression of G6PDH does not affect the behavior of HEK-293 clones stably expressing interferon-α2b. AIMS Bioengineering, 3(3), p. 319-336.

Arzate, A., Ascanio, G., Carreau, P. J. & Tanguy, P. A. (2004). Extensional viscosity of coating colors and its relation with jet coating performance. Applied Rheology, 14(5), p. 240-250.

Assali, S., Lahnemann, J., Vu, T. T. T., Jons, K. D., Gagliano, L., Verheijen, M. A., ... Haverkort, J. E. M. (2017). Crystal phase quantum well emission with digital control. Nano Letters, 17(10), p. 6062-6068.

Attendu, X., Ruis, R. M., Boudoux, C., van Leeuwen, T. G. & Faber, D. J. (2019). Simple and robust calibration procedure for k-linearization and dispersion compensation in optical coherence tomography. Journal of Biomedical Optics, 24(5), p. 1-11.

Aucoin, M. G., McMurray-Beaulieu, V., Poulin, F., Boivin, E. B., Chen, J., Ardelean, F. M., ... Jolicoeur, M. (2006). Identifying conditions for inducible protein production in E. coli: combining a fed-batch and multiple induction approach. Microbial Cell Factories, 5.

Avti, P. K., Maysinger, D. & Kakkar, A. (2013). Alkyne-Azide “click” chemistry in designing nanocarriers for applications in biology. Molecules (Basel, Switzerland), 18(8), p. 9531-9549.

Ayang, A., Ngohe-Ekam, P.-S., Videme, B. & Temga, J. (2016). Power consumption: Base stations of telecommunication in Sahel zone of Cameroon: Typology based on the power consumption—model and energy savings. Journal of Energy, 2016.

Azarfar, A., Frigon, J.-F. & Sansò, B. (2014). Priority queueing models for cognitive radio networks with traffic differentiation. EURASIP Journal on Wireless Communications and Networking, 2014.

B

Baaziz, A. & Pierre, S. (2008). Virtual mobility to improve cooperation in mobile ad hoc networks. Journal of Computer Science, 4(12), p. 1071-1075.

Bah, T., Pierre, S. & Glitho, R. (2007). A novel service mobility architecture for SIP environments. Journal of Computer Science, 3(8), p. 666-672.

Bai, X., Marcotte, D., Gamache, M., Gregory, D. & Lapworth, A. (2018). Automatic generation of feasible mining pushbacks for open pit strategic planning. Journal of the Southern African Institute of Mining and Metallurgy, 118(5), p. 515-530.

Bale, C. W., Bélisle, E., Chartrand, P., Decterov, S. A., Eriksson, G., Gheribi, A. E., ... Van Ende, M. A. (2016). FactSage thermochemical software and databases, 2010–2016. Calphad, 54, p. 35-53.

Ballaz, L., Raison, M., Detrembleur, C., Gaudet, G. & Lemay, M. (2016). Joint torque variability and repeatability during cyclic flexion-extension of the elbow. BMC Sports Science, Medicine and Rehabilitation, 8.

Baptiste, N. & Chapuis, R. P. (2015). What maximum permeability can be measured with a monitoring well? Engineering Geology, 184(C), p. 111-118.

Baril, C., Yacout, S. & Clément, B. (2013). Collaborative decision-making in product design: An interactive multiobjective approach. Journal of Industrial Engineering, 2013.

Barirani, A., Agard, B. & Beaudry, C. (2013). Competence maps using agglomerative hierarchical clustering. Journal of Intelligent Manufacturing, 24(2), p. 373-384.

Barirani, A., Agard, B. & Beaudry, C. (2013). Discovering and assessing fields of expertise in nanomedicine: a patent co-citation network perspective. Scientometrics, 94(3), p. 1111-1136.

Barirani, A., Beaudry, C. & Agard, B. (2015). Distant recombination and the creation of basic inventions: An analysis of the diffusion of public and private sector nanotechnology patents in Canada. Technovation, 36-37, p. 39-52.

Basque, E. A., Brodeur, C., Du Ruisseau, M., Roberge, J., Soare, A. & Tremblay, M. (2021). Formation documentaire créditée et obligatoire aux cycles supérieurs : contexte et bénéfices pour la clientèle étudiante et le corps professoral. Documentation et bibliothèques, 67(1), p. 26-37.

Bassek, C. K., Pierre, S. & Quintero, A. (2006). Redundancy schemes for high availability computer clusters. Journal of Computer Science, 2(1), p. 33-47.

Bassis, N. F. & Armellini, F. (2018). Systems of innovation and innovation ecosystems: a literature review in search of complementarities. Journal of Evolutionary Economics, 28(5), p. 1053-1080.

Beamonte, R. & Dagenais, M. R. (2016). Detection of common problems in real-Time and multicore systems using model-based constraints. Scientific Programming, 2016, p. 1-18.

Beamonte, R. & Dagenais, M. R. (2015). Linux low-latency tracing for multicore hard real-time systems. Advances in Computer Engineering, 2015.

Beaubrun, R., Llano-Ruiz, J.-F. & Quintero, A. (2012). An approach for designing and implementing middleware in wireless sensor networks. Sensors & Transducers, 14-2, p. 150-163.

Beaudry, C. (2001). Entry, Growth and Patenting in Industrial Clusters: A Study of the Aerospace Industry in the UK. International Journal of the Economics of Business, 8(3), p. 405-436.

Beaudry, C. (2014). Impact of collaboration and funding on the propensity to patent of Canadian biotechnology firms 1999-2005. International Journal of Biotechnology, 13(1/2/3), p. 22-52.

Beaudry, C. & Allaoui, S. (2012). Impact of public and private research funding on scientific production: The case of nanotechnology. Research Policy, 41(9), p. 1589-1606.

Beaudry, C. & Breschi, S. (2003). Are firms in clusters really more innovative? Economics of Innovation and New Technology, 12(4), p. 325-342.

Beaudry, C. & Kananian, R. (2013). Follow the (Industry) Money: The Impact of Science Networks and Industry-to-University Contracts on Academic Patenting in Nanotechnology and Biotechnology. Industry & Innovation, 20(3), p. 241-260.

Beaudry, C. & Schiffauerova, A. (2011). Impacts of collaboration and network indicators on patent quality: The case of Canadian nanotechnology innovation. European Management Journal, 29(5), p. 362-376.

Beaudry, C. & Schiffauerova, A. (2011). Is Canadian intellectual property leaving Canada? A study of nanotechnology patenting. The Journal of Technology Transfer, 36(6), p. 665-679.

Beaudry, C. & Schiffauerova, A. (2009). Who's right, Marshall or Jacobs? The localization versus urbanization debate. Research Policy, 38(2), p. 318-337.

Beaudry, C. & Swann, G. M. P. (2009). Firm growth in industrial clusters of the United Kingdom. Small Business Economics, 32(4), p. 409-424.

Beaulieu, E., Laurence, A., Birlea, M., Sheehy, G., Angulo-Rodriguez, L., Latour, M., ... Leblond, F. (2020). Wide-field optical spectroscopy system integrating reflectance and spatial frequency domain imaging to measure attenuation-corrected intrinsic tissue fluorescence in radical prostatectomy specimens. Biomedical Optics Express, 11(4), p. 2052-2072.

Bédard, É., Boppe, I., Kouame, S., Martin, P., Pinsonneault, L., Valiquette, L., ... Prévost, M. (2016). Combination of heat shock and enhanced thermal regime to control the growth of a persistent Legionella pneumophila strain. Pathogens, 5(2).

Bédard, É., Boppe, I., Kouame, S., Martin, P., Pinsonneault, L., Valiquette, L., ... Prévost, M. (2016). Combination of heat shock and enhanced thermal regime to control the growth of a persistent Legionella pneumophila strain. Pathogens, 5(2).

Bedard, E., Laferriere, C., Déziel, É. & Prévost, M. (2018). Impact of stagnation and sampling volume on water microbial quality monitoring in large buildings. PLOS One, 13(6).

Bédard, É., Levesque, S., Martin, P., Pinsonneault, L., Paranjape, K., Lalancette, C., ... Prévost, M. (2016). Energy conservation and the promotion of Legionella pneumophila growth: The probable role of heat exchangers in a nosocomial outbreak. Infection Control & Hospital Epidemiology, 37(12), p. 1475-1480.

Bédard, É., Prévost, M. & Déziel, É. (2016). Pseudomonas aeruginosa in premise plumbing of large buildings. MicrobiologyOpen, 5(6), p. 937-956.

Belhaiza, S., Audet, C. & Hansen, P. (2014). A note on bimatrix game maximal Selten subsets. Arabian Journal of Mathematics, 3(3), p. 299-311.

Bellemare, J., Carignan, L.-P., Sirois, F. & Ménard, D. (2015). Etching the oxide barrier of micrometer-scale self-organized porous anodic alumina membranes. Journal of The Electrochemical Society, 162(4), E47-E50.

Belot, I., Vidal, D., Votsmeier, M., Hayes, R. E. & Bertrand, F. (2020). Numerical investigation of the impact of washcoat distribution on the filtration performance of gasoline particulate filters. Chemical Engineering Science, 221.

Beltrame, G. (2015). Triple Modular Redundancy verification via heuristic netlist analysis. PeerJ Computer Science.

Belzile, B. & Birglen, L. (2018). Practical considerations on proprioceptive tactile sensing for underactuated fingers. Transactions of the Canadian Society for Mechanical Engineering, 42(1), p. 71-79.

Ben Abdelghani, F., Aubertin, M., Simon, R. & Therrien, R. (2015). Numerical simulations of water flow and contaminants transport near mining wastes disposed in a fractured rock mass. International Journal of Mining Science and Technology, 25(1), p. 37-45.

Ben Ali, M., D’Amours, S., Gaudreault, J. & Carle, M.-A. (2018). Configuration and evaluation of an integrated demand management process using a space-filling design and Kriging metamodeling. Operations Research Perspectives, 5, p. 45-58.

Ben Dhieb, F., Jalali Dil, E., Tabatabaei, S. H., Mighri, F. & Ajji, A. (2019). Effect of nanoclay orientation on oxygen barrier properties of LbL nanocomposite coated films. RSC Advances, 9(3), p. 1632-1641.

Ben Ftima, M., Lafrance, S. & Léger, P. (2020). Three-dimensional modelling of shear keys in concrete gravity dams using an advanced grillage method. Water Science and Engineering, 13(3), p. 223-232.

Benacer, I., Boyer, F.-R. & Savaria, Y. (2019). A high-speed, scalable, and programmable traffic manager architecture for flow-based networking. IEEE Access, 7, p. 2231-2243.

Benacer, I., Boyer, F.-R. & Savaria, Y. (2019). HPQS: A fast, high-capacity, hybrid priority queuing system for high-speed networking devices. IEEE Access, 7, p. 130672-130684.

Benbachir, A. & Dagenais, M. R. (2021). Hypertracing: Tracing through virtualization layers. IEEE Transactions on Cloud Computing, 9(2), p. 654-669.

Bendavid, Y., Castro, L., Lefebvre, L. A. & Lefebvre, É. (2006). Explorando los impactos de la RFID en los procesos de negocios de una cadena de suministro. Journal of Technology Management & Innovation, 1(4), p. 30-42.

Benjelloun, K. & Boukas, E.-K. (1997). Stochastic stability of linear time-delay system with Markovian jumping parameters. Mathematical Problems in Engineering, 3(3), p. 187-201.

Benjelloun, K., Boukas, E.-K., Costa, O. L. V. & Shi, P. (1998). Design of robust controller for linear systems with Markovian jumping parameters. Mathematical Problems in Engineering, 4(4), p. 269-288.

Bennacer, R., Reggio, M., Pellerin, N. & Ma, X. (2017). Differentiated heated lid driven cavity interacting with tube: a lattice Boltzmann study. Thermal Science, 21(1A), p. 89-104.

Bensadoun, F., Kchit, N., Billotte, C., Bickerton, S., Trochu, F. & Ruiz, E. (2011). A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding. International Journal of Polymer Science, 2011.

Bensadoun, F., Kchit, N., Billotte, C., Trochu, F. & Ruiz, E. (2011). A Comparative Study of Dispersion Techniques for Nanocomposite Made with Nanoclays and an Unsaturated Polyester Resin. Journal of Nanomaterials, 2011, p. 406087.

Benzerrouk, H., Nebylov, A. & Li, M. (2018). Multi-UAV Doppler information fusion for target tracking based on distributed high degrees information filters. Aerospace, 5(1), p. 1-21.

Bérard, A., Patience, G. S., Chouinard, G. & Tavares, J. R. (2016). Photo initiated chemical vapour deposition to increase polymer hydrophobicity. Scientific Reports, 6(1).

Berger, M., Kocar, I., Fortin-Blanchette, H. & Lavertu, C. (2019). Large-signal modeling of three-phase dual active bridge converters for electromagnetic transient analysis in DC grids. Journal of Modern Power Systems and Clean Energy, 7(6), p. 1684-1696.

Berlín, G., Brassard, G., Bussières, F., Godbout, N., Slater, J. A. & Tittel, W. (2011). Experimental loss-tolerant quantum coin flipping. Nature Communications, 2.

Bernard-Garcia, M. & Mahdi, T.-F. (2021). Discussion of "New empirical model for breaching of earth-rock dams" by Qiming Zhong, Shengshui Chen, Zhongzhi Fu, and Yibo Shan. Natural Hazards Review, 22(3).

Bernier, M. (2019). A review of vertical ground heat exchanger sizing tools including an inter-model comparison. Renewable and Sustainable Energy Reviews, 110, p. 247-265.

Bernier, M. & Brussieux, Y. (2019). Universal short time g*-functions : generation and application. Science and Technology for the Built Environment, 25(8), p. 993-1006.

Bersani, C., Dagdougui, H., Roncoli, C. & Sacile, R. (2019). Distributed product flow control in a network of inventories with stochastic production and demand. IEEE Access, 7, p. 22486-22494.

Bertauld, T. & Dagenais, M. R. (2017). Low-level trace correlation on heterogeneous embedded systems. EURASIP Journal on Embedded Systems, 2017(1), p. 1-14.

Bertrand, M.-J., Abran, M., Maafi, F., Busseuil, D., Merlet, N., Mihalache-Avram, T., ... Tardif, J.-C. (2019). In vivo near-infrared fluorescence imaging of atherosclerosis using local delivery of novel targeted molecular probes. Scientific Reports, 9(1).

Besançon, M. (2019). A Julia package for bilevel optimization problems. Journal of Open Source Software, 4(39).

Besançon, M., Anjos, M. F. & Brotcorne, L. (2021). Complexity of near-optimal robust versions of multilevel optimization problems. Optimization Letters, 15(8), p. 2597-2610.

Besner, M. C., Ebacher, G., Jung, B. S., Karney, B., Lavoie, J., Payment, P. & Prévost, M. (2010). Negative pressures in full-scale distribution system: field investigation, modelling, estimation of intrusion volumes and risk for public health. Drinking Water Engineering and Science, 3(2), p. 101-106.

Beuguel, Q., Bagheriasl, D., Bruel, C., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2018). Comportement rhéologique à l’état fondu de nanocomposites à base de nanocristaux de cellulose (CNCs). Rhéologie (34), p. 10-16.

Beuguel, Q., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2018). Rheological behavior of cellulose nanocrystal suspensions in polyethylene glycol. Journal of Rheology, 62(2), p. 607-618.

Beuguel, Q., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2018). Ultrasonication of spray- and freeze-dried cellulose nanocrystals in water. Journal of Colloid and Interface Science, 516, p. 23-33.

Beya, F., Mbonimpa, M., Belem, T., Li, L., Marceau, U., Kalonji, P., ... Ouellet, S. (2019). Mine backfilling in the permafrost, Part I: Numerical prediction of thermal curing conditions within the cemented paste backfill matrix. Minerals, 9(3), p. 1-18.

Biancheri, C. & Dagenais, M. R. (2016). Fine-grained multilayer virtualized systems analysis. Journal of Cloud Computing, 5(1), p. 1-14.

Bidhendi, A. J., Altartouri, B., Gosselin, F. P. & Geitmann, A. (2019). Mechanical stress initiates and sustains the morphogenesis of wavy leaf epidermal cells. Cell Report, 28(5), 1237-1250.e6.

Billotte, C., Fotsing, É.-R. & Ruiz, E. (2017). Optimization of alumina slurry for oxide-oxide ceramic composites manufactured by injection molding. Advances in Materials Science and Engineering, 2017.

Billotte, C., Roland Fotsing, E. & Ruiz, E. (2017). Optimization of alumina slurry for oxide-oxide ceramic composites manufactured by injection molding. Advances in Materials Science and Engineering, 2017.

Binette, J.-C. & Srinivasan, B. (2016). On the use of nonlinear model predictive control without parameter adaptation for batch processes. Processes, 4(3).

Birglen, L. (2019). Design of a partially-coupled self-adaptive robotic finger optimized for collaborative robots. Autonomous Robots, 43(2), p. 523-538.

Birglen, L. (2010). From flapping wings to underactuated fingers and beyond: a broad look to self-adaptive mechanisms. Mechanical Sciences, 1(1), p. 5-12.

Birglen, L. (2011). The kinematic preshaping of triggered self-adaptive linkage-driven robotic fingers. Mechanical Sciences, 2(1), p. 41-49.

Blais, B. & Bertrand, F. (2017). CFD-DEM investigation of viscous solid–liquid mixing: Impact of particle properties and mixer characteristics. Chemical Engineering Research and Design, 118, p. 270-285.

Blais, B. & Bertrand, F. (2015). On the use of the method of manufactured solutions for the verification of CFD codes for the volume-averaged Navier–Stokes equations. Computer & Fluids, 114, p. 121-129.

Blais, B., Bertrand, O., Fradette, L. & Bertrand, F. (2017). CFD-DEM simulations of early turbulent solid–liquid mixing: Prediction of suspension curve and just-suspended speed. Chemical Engineering Research and Design, 123, p. 388-406.

Blais, B. & Ilinca, F. (2018). Development and validation of a stabilized immersed boundary CFD model for freezing and melting with natural convection. Computers & Fluids, 172, p. 564-581.

Blais, B., Lassaigne, M., Goniva, C., Fradette, L. & Bertrand, F. (2016). Development of an unresolved CFD–DEM model for the flow of viscous suspensions and its application to solid–liquid mixing. Journal of Computational Physics, 318, p. 201-221.

Blais, B., Lassaigne, M., Goniva, C., Fradette, L. & Bertrand, F. (2016). A semi-implicit immersed boundary method and its application to viscous mixing. Computer & Chemical Engineering, 85, p. 136-146.

Blais, B., Tucny, J.-M., Vidal, D. & Bertrand, F. (2015). A conservative lattice Boltzmann model for the volume-averaged Navier–Stokes equations based on a novel collision operator. Journal of Computational Physics, 294, p. 258-273.

Blanchard-Dionne, A.-P. & Meunier, M. (2018). Multiperiodic nanohole array for high precision sensing. Nanophotonics, 8(2), p. 325-329.

Blanchard-Dionne, A.-P. & Meunier, M. (2017). Optical transmission theory for metal-insulator-metal periodic nanostructures. Nanophotonics, 6(1), p. 349-355.

Bodkhe, S., Turcot, G., Gosselin, F. P. & Therriault, D. (2017). One-step solvent evaporation-assisted 3D printing of piezoelectric PVDF nanocomposite structures. ACS Applied Materials & Interfaces, 9(24), p. 20833-20842.

Boisjoly, G., Wasfi, R. & El-Geneidy, A. (2018). How much is enough? Assessing the influence of neighborhood walkability on undertaking 10-minutes walks. Journal of Transport and Land Use, 11(1), p. 143-151.

Bonarens, M., Greiner, R., Votsmeier, M. & Vidal, D. (2021). Towards a polydisperse packed bed filtration model as a surrogate model for particulate filters. Journal of Aerosol Science, 160, p. 105900. Item availablity restricted.

Bonguet, A. & Bellaïche, M. (2017). A survey of denial-of-service and distributed denial of service attacks and defenses in cloud computing. Future Internet, 9(3).

Boppe, I., Bedard, E., Taillandier, C., Lecellier, D., Nantel-Gauvin, M.-A., Villion, M., ... Prévost, M. (2016). Investigative approach to improve hot water system hydraulics through temperature monitoring to reduce building environmental quality hazard associated to Legionella. Building and Environment, 108, p. 230-239.

Borowczyk, A., Nguyen, D.-T., Nguyen, A. P.-V., Nguyen, D. Q., Saussié, D. & Le Ny, J. (2017). Autonomous landing of a quadcopter on a high-speed ground vehicle. Journal of Guidance, Control, and Dynamics, 40(9), p. 2378-2385.

Bösch, P. M. & Ciari, F. (2017). MacroSim - A macroscopic Mobsim for MATSim. Procedia Computer Science, 109, p. 861-868.

Bostani, A., Tehranchi, A. & Kashyap, R. (2017). Super-tunable, broadband up-conversion of a high-power CW laser in an engineered nonlinear crystal. Scientific Reports, 7.

Bou Assi, E., Gagliano, L., Rihana, S., Nguyen, D. K. & Sawan, M. (2018). Bispectrum features and multilayer perceptron classifier to enhance seizure prediction. Scientific Reports, 8.

Boucher, P., Atrash, A., Kelouwani, S., Honoré, W., Nguyen, H., Villemure, J., ... Pineau, J. (2013). Design and validation of an intelligent wheelchair towards a clinically-functional outcome. Journal of NeuroEngineering and Rehabilitation, 10.

Boudreau-Trudel, B., Nadeau, S., Zaras, K. & Deschamps, I. (2014). Introduction of innovative equipment in mining: Impact on occupational health and safety. Open Journal of Safety Science and Technology, 4(1), p. 49-58.

Bouheret, S. & Bernier, M. (2018). Modelling of a water-to-air variable capacity ground-source heat pump. Journal of Building Performance Simulation, 11(3), p. 1-11.

Boukas, E.-K. (2006). Discrete-time systems with time-varying time delay: Stability and stabilizability. Mathematical Problems in Engineering, 2006, p. 42489.

Boukas, E.-K. & Al-Muthairi, N. F. (2004). ℋ∞constant gain state feedback stabilization of stochastic hybrid systems with Wiener process. Mathematical Problems in Engineering, 2004(4), p. 333-345.

Boukas, E.-K., Shi, P., Karan, M. & Kaya, C. Y. (2002). Linear discrete-time systems with Markovian jumps and mode dependent time-delay: Stability and stabilizability. Mathematical Problems in Engineering, 8(2), p. 123-133.

Boukas, E.-K. & Yang, H. (1997). Robust stability of nonlinear piecewise deterministic systems under matching conditions. Mathematical Problems in Engineering, 3(3), p. 203-215.

Boukas, E.-K. & Yang, H. (1996). Stability of stochastic systems with jumps. Mathematical Problems in Engineering, 3(2), p. 173-185.

Boulay, A.-M., Bare, J., Benini, L., Berger, M., Lathuillière, M. J., Manzardo, A., ... Pfister, S. (2017). The WULCA consensus characterization model for water scarcity footprints: assessing impacts of water consumption based on available water remaining (AWARE). International Journal of Life Cycle Assessment, 23(2), p. 368-378.

Boutayeb, H. & Nedil, M. (2016). High gain slot array with Fabry-Perot cavity feeding circuit. International Journal of Antennas and Propagation, 2016, p. 1-5.

Bove, P., Claveau-Mallet, D., Boutet, É., Lida, F. & Comeau, Y. (2018). Development and modelling of a steel slag filter effluent neutralization process with CO₂-enriched air from an upstream bioprocess. Water Research, 129, p. 11-19.

Brahimi, M. T., Allet, A. & Paraschivoiu, I. (1995). Aerodynamic analysis models for vertical-axis wind turbines. International Journal of Rotating Machinery, 2(1), p. 15-21.

Brassard, D., Dubé, M. & Tavares, J. R. (2019). Resistance welding of thermoplastic composites with a nanocomposite heating element. Composites Part B: Engineering, 165, p. 779-784.

Breumier, S., Villani, A., Maurice, C., Lévesque, M. & Kermouche, G. (2019). Effect of crystal orientation on indentation-induced residual stress field: Simulation and experimental validation. Materials & Design, 169.

Brimmo, A., Goyette, P.-A. F., Alnemari, R., Gervais, T. & Qasaimeh, M. A. (2018). 3D printed microfluidic probes. Scientific Reports, 8(1).

Brosseau, C., Émile, B., Labelle, M.-A., Laflamme, É., Dold, P. L. & Comeau, Y. (2016). Compact secondary treatment train combining a lab-scale moving bed biofilm reactor and enhanced flotation processes. Water Research, 106, p. 571-582.

Brown, A.-C. (2017). Constraints on conceptual and quantitative modeling of early diagenetic sediment-hosted stratiform copper mineralization. Minerals, 7(10).

Brown, A.-C. (2017). Constraints on conceptual and quantitative modeling of early diagenetic sediment-hosted stratiform copper mineralization. Minerals, 7(10).

Bruel, C., Beuguel, Q., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2018). The apparent structural hydrophobicity of cellulose nanocrystals. J-FOR The Journal of Science and Technology for Forest Products and Processes, 7(4), p. 13-23.

Bruel, C., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2019). The structural amphiphilicity of cellulose nanocrystals characterized from their cohesion parameters. Carbohydrate Polymers, 205, p. 184-191.

Brunet, A. R., Labelle, F., Wong, P. & Gervais, T. (2017). Reconfigurable microfluidic magnetic valve arrays: towards a radiotherapy-compatible spheroid culture platform for the combinatorial screening of cancer therapies. Sensors, 17(10).

Brunet, A. R., Labelle, F., Wong, P. & Gervais, T. (2017). Reconfigurable microfluidic magnetic valve arrays: Towards a radiotherapy-compatible spheroid culture platform for the combinatorial screening of cancer therapies. Sensors, 17(10).

Brunet, C., Savadogo, O., Baptiste, P. & Bouchard, M. A. (2018). Shedding some light on photovoltaic solar energy in Africa – A literature review. Renewable and Sustainable Energy Reviews, 96, p. 325-342.

Brunet, C., Savadogo, O., Baptiste, P., Bouchard, M. A., Rakotoary, J. C., Ravoninjatovo, A., ... Merveille, N. (2020). Impacts generated by a large-scale solar photovoltaic power plant can lead to conflicts between sustainable development goals: A review of key lessons learned in Madagascar. Sustainability, 12(18), p. 7471.

Brunette, J. & Bazergui, A. (2021). Spinal Biomechanics Concepts of Pediatric Scoliosis and Trunk Shift Applied to Daily Tasks and Sports. Journal of Musculoskeletal Disorders and Treatment, 7(4).

Bulle, C., Margni, M., Patouillard, L., Boulay, A.-M., Bourgault, G., De Bruille, V., ... Jolliet, O. (2019). IMPACT World+: a globally regionalized life cycle impact assessment method. The International Journal Life Cycle Assessment, 24(9), p. 1653-1674.

Burlet-Vienney, D., Chinniah, Y. & Pizarro-Chong, A. (2014). Design of an intelligent tool for the observation and follow-up of lockout procedures during maintenance activities on industrial machines. Open Journal of Safety Science and Technology, 4(2), p. 106-118.

Burnet, J.-B., Faraj, T., Cauchie, H.-M., Joaquim-Justo, C., Servais, P., Prévost, M. & Dorner, S. (2017). How does the cladoceran Daphnia pulex affect the fate of Escherichia coli in water? PLOS One, 12(2), p. 1-16.

Buxadera-Palomero, J., Fricke, K., Reuter, S., Gil, F. J., Rodriguez, D. & Canal, C. (2021). One-Step Liquid Phase Polymerization of HEMA by Atmospheric-Pressure Plasma Discharges for Ti Dental Implants. Applied Sciences, 11(2).

C

Cadotte, A., Cadotte, D. W., Livne, M., Cohen-Adad, J., Fleet, D., Mikulis, D. & Fehlings, M. G. (2015). Spinal Cord Segmentation by One Dimensional Normalized Template Matching: A Novel, Quantitative Technique to Analyze Advanced Magnetic Resonance Imaging Data. PLOS One, 10(10).

Calabrese, E., Adil, S. M., Cofer, G., Perone, C. S., Cohen-Adad, J., Lad, S. P. & Johnson, G. A. (2018). Postmortem diffusion MRI of the entire human spinal cord at microscopic resolution. NeuroImage: Clinical, 18, p. 963-971.

Caloz, C. (2009). Perspectives on EM metamaterials. Materials Today, 12(3), p. 12-20.

Cao, Y., Li, M., Svogor, I., Wei, S. & Beltrame, G. (2018). Dynamic range-only localization for multi-robot systems. IEEE Access, 6, p. 46527-46537.

Carmona, C., Gómez, P., Ferrer, M. A., Plamondon, R. & Londral, A. (2017). Estudio de diferentes parámetros para la detección de esclerosis lateral amiotrófica a partir del movimiento articulatorio. Loquens, 4(1), p. 1-5.

Carmona-Duarte, C., Ferrer, M. A., Plamondon, R., Gómez-Rodellar, A. & Gómez-Vilda, P. (2021). Sigma-lognormal modeling of speech. Cognitive Computation, 13(2), p. 488-503.

Castanha, R. F., Mariano, A. P., Morais, L. A. S. , Scramin, S. & Monteiro, R. T. R. (2014). Optimization of lipids production by Cryptococcus laurentii 11 using cheese whey with molasses. Brazilian Journal of Microbiology, 45(2), p. 379-387.

Castejon, P., Habibi, K., Saffar, A., Ajji, A., Martinez, A. B. & Arencon, D. (2018). Polypropylene-based porous membranes: Influence of polymer composition, extrusion draw ratio and uniaxial strain. Polymers, 10(1).

Castonguay, A., Thomas, S., Lesage, F. & Casanova, C. (2014). Repetitive and Retinotopically Restricted Activation of the Dorsal Lateral Geniculate Nucleus with Optogenetics. PLOS One, 9(4).

Castro, L., Urquiza, G., Adamkowski, A. & Reggio, M. (2011). Experimental and numerical simulations predictions comparison of power and efficiency in hydraulic turbine. Modelling and Simulation in Engineering, 2011, p. 1-8.

Castro, L. & Fosso Wamba, S. (2007). An inside look at RFID technology. Journal of Technology Management & Innovation, 2(1), p. 128-141.

Causse, P., Ravey, C. & Trochu, F. (2018). Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding. Journal of Composites Science, 2(2).

Causse, P., Ravey, C. & Trochu, F. (2018). Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding. Journal of Composite Science, 2(2).

Chacana Olivares, J. A., Alizadeh, S., Labelle, M.-A., Laporte, A., Hawari, J. & Comeau, Y. (2017). Effect of ozonation on anaerobic digestion sludge activity and viability. Chemosphere, 176, p. 405-411.

Chacana Olivares, J. A., Labelle, M.-A., Laporte, A., Gadbois, A., Barbeau, B. & Comeau, Y. (2017). Ozonation of Primary Sludge and Digested Sludge to Increase Methane Production in a Chemically Enhanced Primary Treatment Facility. Ozone: Science & Engineering, 39(3), p. 148-158.

Champagne Cossette, C., Forbes, J. R. & Saussié, D. (2020). Lagrangian Derivation of Variable-Mass Equations of Motion using an Arbitrary Attitude Parameterization. Journal of the Astronautical Sciences, 67(4), p. 1206-1219.

Charton, E., Meurs, M.-J., Jean-Louis, L. & Gagnon, M. (2013). Using collaborative tagging for text classification: from text classification to opinion mining. Informatics, 1(1), p. 32-51.

Chazarenc, F., Filiatrault, M., Brisson, J. & Comeau, Y. (2010). Combination of slag, limestone and sedimentary apatite in columns for phosphorus removal from sludge fish farm effluents. Water, 2(3), p. 500-509.

Chazarenc, F., Naylor, S., Comeau, Y., Merlin, G. & Brisson, J. (2010). Modeling the effect of plants and peat on evapotranspiration in constructed wetlands. International Journal of Chemical Engineering, 2010, p. 1-6.

Chen, C. & Beltrame, G. (2017). An adaptive Markov model for the timing analysis of probabilistic caches. ACM Transactions on Design Automation of Electronic Systems, 23(1), p. 1-24.

Chen, G., Zhang, X. & Li, N. (2019). Novel method to simultaneously adjust the size and pH value of individual microdroplets in silicone oil. IEEE Access, 7, p. 114183-114190.

Chen, X., Shi, X., Zhou, J. & Yu, Z. (2019). Influence of polypropylene fiber reinforcement on tensile behavior and failure mode of tailings cemented paste backfill. IEEE Access, 7, p. 69015-69026.

Chevrefils, C., Cheriet, F., Grimard, G., Miron, M.-C. & Aubin, C.-É. (2012). Quantitative evaluation of an automatic segmentation method for 3D reconstruction of intervertebral scoliotic disks from MR images. BMC Medical Imaging, 12.

Chiganne, F., Marche, C. & Mahdi, T.-F. (2014). Evaluation of the overflow failure scenario and hydrograph of an embankment dam with a concrete upstream slope protection. Natural Hazards, 71(1), p. 21-39.

Chiganne, F., Marche, C. & Mahdi, T.-F. (2014). Modélisation probabiliste du débit de rupture par submersion d’un barrage en remblai. Canadian Journal of Civil Engineering, 41(8), p. 677-685.

Chio, C.-H., Teng, C., Tam, K.-W., Choi, W.-W., Cheong, P. & Ho, S.-K. (2019). Differential permittivity sensor using microstrip terminated cross-shaped resonator structure for material characterization. IEEE Access, 7, p. 101960-101968.

Chizari, K., Daoud, M. A., Ravindran, A. R. & Therriault, D. (2016). 3D printing of highly conductive nanocomposites for the functional optimization of liquid sensors. Small, 12(44), p. 6076-6082.

Choinière, M., Paultre, P. & Léger, P. (2019). Influence of soil-structure interaction on seismic demands in shear wall building gravity load frames. Engineering Structures, 198.

Chu, P., Guo, L., Zhang, L. & Wu, K. (2019). Wide stopband bandpass filter implemented by stepped impedance resonator and multiple in-resonator open stubs. IEEE Access, 7, p. 140631-140636.

Chyu, M.-C., Austin, T., Calisir, F., Chanjaplammootil, S., Davis, M. J., Favela, J., ... Zhang, Y.-T. (2015). Healthcare Engineering Defined: A White Paper. Journal of Healthcare Engineering, 6(4), p. 635-648.

Cimmino, M. (2021). An approximation of the finite line source solution to model thermal interactions between geothermal boreholes. International Communications in Heat and Mass Transfer, 127. Item availablity restricted.

Cimmino, M. (2018). Fast calculation of the g-functions of geothermal borehole fields using similarities in the evaluation of the finite line source solution. Journal of Building Performance Simulation, 11(6), p. 655-668.

Cimmino, M. (2018). A finite line source simulation model for geothermal systems with series- and parallel-connected boreholes and independent fluid loops. Journal of Building Performance Simulation, 11(4), p. 414-432.

Cimmino, M. (2019). Semi-Analytical Method for g-Function Calculation of bore fields with series- and parallel-connected boreholes. Science and Technology for the Built Environment, 25(9), p. 1007-1022.

Cimmino, M. & Baliga, B. R. (2019). A hybrid numerical-semi-analytical method for computer simulations of groundwater flow and heat transfer in geothermal borehole fields. International Journal of Thermal Sciences, 142, p. 366-378.

Cimmino, M. & Laferrière, A. (2019). Linear model predictive control for the reduction of auxiliary electric heating in residential self-assisted ground-source heat pump systems. Science and Technology for the Built Environment, 25(8), p. 1095-1110.

Claeyssen, É., Dorion, S., Clendenning, A., He, J. Z., Wally, O., Chen, J., ... Rivoal, J. (2013). The futile cycling of hexose phosphates could account for the fact that hexokinase exerts a high control on glucose phosphorylation but not on glycolytic rate in transgenic potato (solanum tuberosum) roots. PLOS One, 8(1).

Claveau-Mallet, D., Boutet, É. & Comeau, Y. (2018). Steel slag filter design criteria for phosphorus removal from wastewater in decentralized applications. Water Research, 143, p. 28-37.

Claveau-Mallet, D. & Comeau, Y. (2020). Chemical clogging and evolution of head losses in steel slag filters used for phosphorus removal. Water, 12(6).

Claveau-Mallet, D., Courcelles, B. & Comeau, Y. (2014). Phosphorus removal by steel slag filters: modeling dissolution and precipitation kinetics to predict longevity. Environmental Science & Technology, 48(13), p. 7489-7493.

Claveau-Mallet, D., Courcelles, B., Pasquier, P. & Comeau, Y. (2017). Numerical simulations with the P-Hydroslag model to predict phosphorus removal by steel slag filters. Water Research, 126, p. 421-432.

Claveau-Mallet, D., Duhaime, F. & Chapuis, R. P. (2012). Practical Considerations when Using the Swedish Fall Cone. Geotechnical Testing Journal, 35(4), p. 618-628.

Claveau-Mallet, D., Lida, F. & Comeau, Y. (2015). Improving phosphorus removal of conventional septic tanks by a recirculating steel slag filter. Water Quality Research Journal, 50(3), p. 211-218.

Claveau-Mallet, D., Seltani, H. & Comeau, Y. (2020). Phosphorus removal and carbon dioxide capture in a pilot conventional septic system upgraded with a sidestream steel slag filter. Water, 12(1).

Claveau-Mallet, D., Wallace, S. & Comeau, Y. (2012). Model of phosphorus precipitation and crystal formation in Electric Arc Furnace steel slag filters. Environmental Science & Technology, 46(3), p. 1465-1470.

Claveau-Mallet, D., Wallace, S. & Comeau, Y. (2013). Removal of phosphorus, fluoride and metals from a gypsum mining leachate using steel slag filters. Water Research, 47(4), p. 1512-1520.

Clément, É. & Dagenais, M. R. (2009). Traces synchronization in distributed networks. Journal of Computer Systems, Networks, and Communications, 2009, p. 1-11.

Clift, R., Sim, S., King, H., Chenoweth, J., Christie, I., Clavreul, J., ... Murphy, R. (2017). The challenges of applying planetary boundaries as a basis for strategic decision-making in companies with global supply chains. Sustainability, 9(2).

Cloutier, M.-S., Séguin, R. & Saunier, N. (2019). Environnement routier et blessés cyclistes résultant d’une collision avec un véhicule : quels facteurs de risque dans un milieu régional faiblement densifié ? Cybergeo, p. 1-30.

Cobetto, N., Aubin, C.-É., Clin, J., Le May, S., Desbiens-Blais, F., Labelle, H. & Parent, S. (2014). Braces optimized with computer-assisted design and simulations are lighter, more comfortable, and more efficient than plaster-cast braces for the treatment of adolescent idiopathic scoliosis. Spine Deformity, 2(4), p. 276-284.

Cobetto, N., Aubin, C.-É., Parent, S., Barchi, S., Turgeon, I. & Labelle, H. (2017). 3D correction of AIS in braces designed using CAD/CAM and FEM: a randomized controlled trial. Scoliosis and Spinal Disorders, 12(1).

Cobetto, N., Aubin, C.-É., Parent, S., Clin, J., Barchi, S., Turgeon, I. & Labelle, H. (2016). Effectiveness of braces designed using computer-aided design and manufacturing (CAD/CAM) and finite element simulation compared to CAD/CAM only for the conservative treatment of adolescent idiopathic scoliosis: a prospective randomized controlled trial. European Spine Journal, 25(10), p. 3056-3064.

Corbellini, L., Lacroix, C., Harnagea, C., Korinek, A., Botton, G. A., Ménard, D. & Pignolet, A. (2017). Epitaxially stabilized thin films of ɛ-Fe₂O₃ (001) grown on YSZ (100). Scientific Reports, 7.

Corcoran, A., Eslami-Nejad, P., Bernier, M. & Badache, M. (2019). Calibration of thermal response test (TRT) units with a virtual borehole. Geothermics, 79, p. 105-113.

Cordier, M. & Léger, P. (2018). Structural stability of gravity dams: a progressive assessment considering uncertainties in shear strength parameters. Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, 12(2), p. 109-122.

Corinthios, M. J. (2016). Chrestenson transform FPGA embedded factorizations. SpringerPlus, 5(1), p. 1-23.

Correia, M., Deffieux, T., Chatelin, S., Provost, J., Tanter, M. & Pernot, M. (2018). 3D elastic tensor imaging in weakly transversely isotropic soft tissues. Physics in Medicine & Biology, 63(15).

Côté, J., Cossette, S., Ramirez-Garcia, P., De Pokomandy, A., Worthington, C., Gagnon, M.-P., ... Tremblay, C. (2015). Evaluation of a Web-based tailored intervention (TAVIE en santé) to support people living with HIV in the adoption of health promoting behaviours: an online randomized controlled trial protocol. BMC Public Health, 15.

Côté, J., Godin, G., Guéhéneuc, Y.-G., Rouleau, G., Ramirez-Garcìa, P., Otis, J., ... Fadel, G. (2012). Evaluation of a real-time virtual intervention to empower persons living with HIV to use therapy self-management: study protocol for an online randomized controlled trial. Trials, 13.

Côté, M. & Dagenais, M. R. (2016). Problem detection in real-time systems by trace analysis. Advances in Computer Engineering, 2016.

Côté, S., Bélanger, L., Beauregard, R., Thiffault, É. & Margni, M. (2019). A conceptual model for forest naturalness assessment and application in Quebec's boreal forest. Forests, 10(4).

Couturier, D. & Dagenais, M. R. (2015). LTTng CLUST: A system-wide unified CPU and GPU tracing tool for OpenCL applications. Advances in Software Engineering, 2015.

Craddock, R. C., Margulies, D. S., Bellec, P., Nichols, B. N., Alcauter, S., Barrios, F. A., ... Xu, T. (2016). Brainhack: a collaborative workshop for the open neuroscience community. GigaScience, 5(1), p. 1-8.

Crouzal, T. & Pabst, T. (2021). A black‐box automated approach to calibrate numerical simulations and optimize cover design: Application to a flow control layer constructed on an experimental waste rock pile. Vadose Zone Journal, 20(3).

D

D'Amours, M., Girard, A. & Sansò, B. (2018). Planning solar in energy-managed cellular networks. IEEE Access, 6, p. 65212-65226.

da Veiga Moreira, J., Hamraz, M., Abolhassani, M., Schwartz, L., Jolicoeur, M. & Peres, S. (2019). Metabolic therapies inhibit tumor growth in vivo and in silico. Scientific Reports, 9(1).

Dahlby, B., Feehan, J., Ferede, E. & Joanis, M. (2014). Four Studies on the Canadian Equalization System. SPP Communiqués, 6.

Dalcé, J. B., Li, L. & Yang, P. (2019). Experimental study of uniaxial compressive strength (UCS) distribution of hydraulic backfill associated with segregation. Minerals, 9(3).

Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M. & Therriault, D. (2012). Preparation of Highly Exfoliated Polyester–Clay Nanocomposites: Process–Property Correlations. Langmuir, 28(1), p. 791-803.

Dallaire, F., Picot, F., Tremblay, J.-P., Sheehy, G., Lemoine, É., Agarwal, R., ... Leblond, F. (2020). Quantitative spectral quality assessment technique validated using intraoperative in vivo Raman spectroscopy measurements. Journal of Biomedical Optics, 25(4).

Dandres, T., Farrahi Moghaddam, R., Nguyen, K. K., Lemieux, Y., Samson, R. & Cheriet, M. (2017). Consideration of marginal electricity in real-time minimization of distributed data centre emissions. Journal of Cleaner Production, 143, p. 116-124.

Dandres, T., Vandromme, N., Obrekht, G., Wong, A., Nguyen, K. K., Lemieux, Y., ... Samson, R. (2017). Consequences of future data center deployment in Canada on electricity generation and environmental impacts: a 2015-2030 prospective study. Journal of Industrial Ecology, 21(5), p. 1312-1322.

De Vos, J., Waygood, O., Letarte, L. & Cao, M. (2021). Do frequent satisfying trips by public transport impact its intended use in later life? Transportation, 2021.

Debarre, L., Boulay, A.-M. & Margni, M. (2022). Freshwater consumption and domestic water deprivation in LCIA: revisiting the characterization of human health impacts. International Journal of Life Cycle Assessment, 27, p. 740-754. Item availablity restricted.

Decterov, S. A. (2018). Thermodynamic database for multicomponent oxide systems. Chimica Techno Acta, 5(1), p. 16-48.

Delacroix, B., Bouarab, A., Fradette, L., Bertrand, F. & Blais, B. (2020). Simulation of granular flow in a rotating frame of reference using the discrete element method. Powder Technology, 369, p. 146-161.

Delacroix, B., Fradette, L., Bertrand, F. & Blais, B. (2021). Which impeller should be chosen for efficientsolid–liquid mixing in the laminar and transitional regime? AIChE Journal.

Delacroix, B., Rastoueix, J., Fradette, L., Bertrand, F. & Blais, B. (2021). CFD-DEM simulations of solid-liquid flow in stirred tanks using a non-inertial frame of reference. Chemical Engineering Science, 230.

Delcroix, B., Le Ny, J., Bernier, M., Azam, M., Qu, B. & Venne, J.-S. (2020). Autoregressive neural networks with exogenous variables for indoor temperature prediction in buildings. Building Simulation.

Demers, E., Kõiv-Vainik, M., Yavari, S., Mench, M., Marchand, L., Vincent, J., ... Brisson, J. (2020). Macrophyte potential to treat leachate contaminated with wood preservatives: plant tolerance and bioaccumulation capacity. Plants, 9(12).

Demers, V., Demarquette, N. R., Turenne, S. & Scalzo, O. (2016). Molding Properties of Inconel 718 Feedstocks Used in Low-Pressure Powder Injection Molding. Advances in Materials Science and Engineering, 2016, p. 1-7.

Deschamps, I., G. Macedo, M. & Eve-Levesque, C. (2013). University-SME collaboration and open innovation: Intellectual-property management tools and the roles of intermediaries. Technology Innovation Management Review, 2013(3), p. 33-41.

Desfossez, J., Desnoyers, M. & Dagenais, M. R. (2016). Runtime latency detection and analysis. Software: Practice and Experience, 46(10), p. 1397-1409.

Deshommes, E., Tardif, R., Edwards, M., Sauvé, S. & Prévost, M. (2012). Experimental determination of the oral bioavailability and bioaccessibility of lead particles. Chemistry Central Journal, 6.

Desjardins, M.-A., Alibert, B., Proulx, C. & Comeau, Y. (2015). Augmentation de capacité d’étangs aérés par la mise en place d’un étang « complètement mélangé » ou d’un RBGS Comment concevoir l’étang n° 2? Vecteur Environnement, 48(5), p. 38-43.

Deslauriers, S. & Mahdi, T.-F. (2018). Flood modelling improvement using automatic calibration of two dimensional river software SRH-2D. Natural Hazards, 91(2), p. 697-715.

Desroches, J., Jermyn, M., Pinto, M., Picot, F., Tremblay, M.-A., Obaid, S., ... Leblond, F. (2018). A new method using Raman spectroscopy for in vivo targeted brain cancer tissue biopsy. Scientific Reports, 8.

Devaraj, V., Lopez, L. F., Beaman, J. J. & Prudhomme, S. (2015). Model-Based Control of a Continuous Coating Line for Proton Exchange Membrane Fuel Cell Electrode Assembly. International Journal of Chemical Engineering, 2015.

Di Mauro, E., Rho, D. & Santato, C. (2021). Biodegradation of bio-sourced and synthetic organic electronic materials towards green organic electronics. Nature Communications, 12.

Diamond, M. L., Gandhi, N., Adams, W. J., Atherton, J., Bhavsar, S. P., Bulle, C., ... Vijver, M. G. (2010). The clearwater consensus: the estimation of metal hazard in fresh water. The International Journal of Life Cycle Assessment, 15(2), p. 143-147.

Dias, V. C. F., Durand, A.-A., Constant, P., Prévost, M. & Bédard, E. (2019). Identification of factors affecting bacterial abundance and community structures in a full-scale chlorinated drinking water distribution system. Water, 11(3).

Diaz-Bolado, A., Laurin, J.-J. & Barriere, P.-A. (2013). Study of microwave tomography measurement setup configurations for breast cancer detection based on breast compression. International Journal of Antennas and Propagation, 2013, p. 1-12.

Dibike, Y., Shakibaeinia, A., Eum, H.-I., Prowse, T. & Droppo, I. (2018). Effects of projected climate on the hydrodynamic and sediment transport regime of the lower Athabasca River in Alberta, Canada. River Research and Applications, 34(5), p. 417-429.

Diha, M. & Pierre, S. (2006). Home agent architecture and algorithms for mobility management in mobile IP networks. Journal of Computer Science, 2(1).

Dimech, A., Chouteau, M., Aubertin, M., Bussière, B., Martin, V. & Plante, B. (2019). Three‐dimensional time‐lapse geoelectrical monitoring of water infiltration in an experimental mine waste rock pile. Vadose Zone Journal, 18(1).

Ding, W., Boutopoulos, C., Bergeron, É., Wilson, A., Costantino, S., Sapieha, P. & Meunier, M. (2015). Laser-triggered gold nanoparticle-assisted cell poration for selective gene delivery. Molecular Therapy, 23(S1).

Diouf Lewis, A., Farahani, R. D., Iervolino, F., Pierre, J., Abderrafai, Y., Lévesque, M., ... Therriault, D. (2022). Design and characterization of carbon fiber-reinforced PEEK/PEI blends for Fused Filament Fabrication additive manufacturing. Materials Today Communications, 31. Item availablity restricted.

Djoumessi, E. E. & Wu, K. (2014). Tunable diplexer for cognitive radio RF front-end modules. Universal Journal of Electrical and Electronic Engineering, 2(7), p. 278-285.

Domingo-Pinillos, J., Senent-Aparicio, J., García-Aróstegui, J. & Baudron, P. (2018). Long term hydrodynamic effects in a semi-arid mediterranean multilayer aquifer: Campo de Cartagena in south-eastern Spain. Water, 10(10), p. 1-21.

Doray, F. & Dagenais, M. R. (2016). Diagnosing performance variations by comparing multi-level execution traces. IEEE Transactions on Parallel and Distributed Systems, 28(2), p. 462-474.

Dorval Dion, C. A., Raphael, W., Tong, E. & Tavares, J. R. (2014). Photo-initiated chemical vapor deposition of thin films using syngas for the functionalization of surfaces at room temperature and near-atmospheric pressure. Surface and Coatings Technology, 244, p. 98-108.

Dorval Dion, C.-A. & Tavares, J. R. (2013). Photo-initiated chemical vapor deposition as a scalable particle functionalization technology (a practical review). Powder Technology, 239, p. 484-491.

Dou, H., Barkaoui, K., Boucheneb, H., Jiang, X. & Wang, S. (2019). Maximal good step graph methods for reducing the generation of the state space. IEEE Access, 7, p. 155805-155817.

Dousset, D., Claude, S. & Wu, K. (2013). A compact high-performance orthomode transducer for the Atacama large millimeter array (ALMA) band 1 (31–45 GHz). IEEE Access, 1, p. 480-487.

Dupuis, M., April, A., Lesage, P. & Forgues, D. (2017). Method to enable LCA analysis through each level of development of a BIM model. Procedia Engineering, 196, p. 857-863.

Dupuis, S., Fortin, C., Caouette, C., Leclair, I. & Aubin, C.-É. (2018). Global postural re-education in pediatric idiopathic scoliosis: a biomechanical modeling and analysis of curve reduction during active and assisted self-correction. BMC Musculoskeletal Disorders, 19.

Dupuy, O., Gauthier, C. J., Fraser, S. A., Desjardins-Crépeau, L., Desjardins, M., Mekary, S., ... Bherer, L. (2015). Higher levels of cardiovascular fitness are associated with better executive function and prefrontal oxygenation in younger and older women. Frontiers in Human Neuroscience, 9.

E

Edake, M., Dalil, M., Darabi Mahboub, M. J., Dubois, J.-L. & Patience, G. S. (2017). Catalytic glycerol hydrogenolysis to 1,3-propanediol in a gas–solid fluidized bed. RSC Advances, 7(7), p. 3853-3860.

El Khalil, A., El Manouni, S. & Ouanan, M. (2005). Simplicity and stability of the first eigenvalue of a nonlinear elliptic system. International Journal of Mathematics and Mathematical Sciences, 2005(10), p. 1555-1563.

El Mendili, M.-M., Cohen-Adad, J., Pelegrini-Issac, M., Rossignol, S., Morizot-Koutlidis, R., Marchand-Pauvert, V., ... Pradat, P.-F. (2014). Multi-Parametric Spinal Cord MRI as Potential Progression Marker in Amyotrophic Lateral Sclerosis. PLOS One, 9(4).

Elhadi, A., Bouchoucha, A., Jomaa, W., Zedan, Y., Schmitt, T. & Bocher, P. (2016). Study of surface wear and damage induced by dry sliding of tempered AISI 4140 steel against hardened AISI 1055 steel. Tribology in Industry, 38(4), p. 475-485.

Ellingsen, L., Holland, A., Drillet, J.-F., Peters, W., Eckert, M., Concepcion, C., ... Majeau-Bettez, G. (2018). Environmental screening of electrode materials for a rechargeable aluminum battery with an AlCl3/EMIMCl electrolyte. Materials, 11(6), p. 936.

Ellingsen, L. A.-W., Hung, C. R., Majeau-Bettez, G., Singh, B., Chen, Z., Whittingham, M. S. & Strømman, A. H. (2016). Nanotechnology for environmentally sustainable electromobility. Nature Nanotechnology, 11(12), p. 1039-1051.

Esen, O., Grmela, M., Gümral, H. & Pavelka, M. (2019). Lifts of symmetric tensors: Fluids, plasma, and grad hierarchy. Entropy, 21(9).

Esmaeili-Marzdashti, S., Pirmohammad, S. & Esmaeili-Marzdashti, S. (2017). Crashworthiness analysis of S-shaped structures under axial impact loading. Latin American Journal of Solids and Structures, 14(5), p. 743-764.

Evrard, M., Dumont, G., Hermans, T., Chouteau, M., Francis, O., Pirard, E. & Nguyen, F. (2018). Geophysical Investigation of the Pb–Zn deposit of Lontzen–Poppelsberg, Belgium. Minerals, 8(6).

Ezzati-Jivan, N. & Dagenais, M. R. (2015). Cube data model for multilevel statistics computation of live execution traces. Concurrency and Computation: Practice and Experience, 27(5), p. 1069-1091.

Ezzati-Jivan, N. & Dagenais, M. R. (2013). A framework to compute statistics of system parameters from very large trace files. ACM SIGOPS Operating Systems Review, 47(1), p. 43-54.

Ezzati-Jivan, N. & Dagenais, M. R. (2017). Multi-scale navigation of large trace data: A survey. Concurrency and Computation: Practice and Experience, 29(10), p. 1-20.

Ezzati-Jivan, N. & Dagenais, M. R. (2012). A stateful approach to generate synthetic events from kernel traces. Advances in Software Engineering, 2012.

F

Fabien-Ouellet, G. (2020). Seismic modeling and inversion using half-precision floating-point numbers. Geophysics, 85(3), F65-F76.

Fabien-Ouellet, G. & Sarkar, R. (2020). Seismic velocity estimation: A deep recurrent neural-network approach. Geophysics, 85(1), U21-U29.

Fan, X., Zhao, P., Zhang, Q., Zhang, T., Zhu, K. & Zhou, C. (2018). A polymer plugging gel for the fractured strata and its application. Materials, 11(5).

Farahani, R. D., Chizari, K. & Therriault, D. (2014). Three-dimensional printing of freeform helical microstructures: a review. Nanoscale, 6(18), p. 10470-10485.

Farahani, R. D., Dalir, H., Aïssa, B., El Khakani, M. A., Lévesque, M. & Therriault, D. (2011). Micro-infiltration of three-dimensional porous networks with carbon nanotube-based nanocomposite for material design. Composites Part A: Applied Science and Manufacturing, 42(12), p. 1910-1919.

Farahani, R. D., Dalir, H., Le Borgne, V., Gautier, L. A., El Khakani, M. A., Lévesque, M. & Therriault, D. (2012). Direct-write fabrication of freestanding nanocomposite strain sensors. Nanotechnology, 23(8).

Farahani, R. D., Dalir, H., Le Borgne, V., Gautier, L. A., El Khakani, M. A., Lévesque, M. & Therriault, D. (2012). Reinforcing epoxy nanocomposites with functionalized carbon nanotubes via biotin–streptavidin interactions. Composites Science and Technology, 72(12), p. 1387-1395.

Farahani, R. D., Dubé, M. & Therriault, D. (2016). Three-dimensional printing of multifunctional nanocomposites: Manufacturing techniques and applications. Advanced Materials, 28(28), p. 5794-5821.

Farahani, R. D., Laberge Lebel, L. & Therriault, D. (2014). Processing parameters investigation for the fabrication of self-supported and freeform polymeric microstructures using ultraviolet-assisted three-dimensional printing. Journal of Micromechanics and Microengineering, 24(5).

Farahani, R. D., Pahlavanpour, M., Dalir, H., Aïssa, B., Khakani, M. A. E., Lévesque, M. & Therriault, D. (2012). Manufacturing composite beams reinforced with three-dimensionally patterned-oriented carbon nanotubes through microfluidic infiltration. Materials & Design, 41, p. 214-225.

Farand, P. & Tavares, J. R. (2017). A concept inventory for knowledge base evaluation and continuous curriculum improvement. Education for Chemical Engineers, 21, p. 33-39.

Farhanian, D., De Crescenzo, G. & Tavares, J. R. (2017). Kinetics, Chemistry, and Morphology of Syngas Photoinitiated Chemical Vapor Deposition. Langmuir, 33(8), p. 1780-1791.

Farhanian, D., De Crescenzo, G. & Tavares, J. R. (2018). Large-Scale Encapsulation of Magnetic Iron Oxide Nanoparticles via Syngas Photo-Initiated Chemical Vapor Deposition. Scientific Reports.

Farhanian, D., Dorval Dion, C. A., Raphael, W., De Crescenzo, G. & Tavares, J. R. (2014). Combined extraction and functionalization of low-cost nanoparticles from municipal solid waste fly ash through PICVD. Journal of Environmental Chemical Engineering, 2(4), p. 2242-2251.

Farnia, F., Frayret, J.-M., Beaudry, C. & Lebel, L. (2015). Time-based combinatorial auction for timber allocation and delivery coordination. Forest Policy and Economics, 50, p. 143-152.

Farnia, F., Frayret, J.-M., LeBel, L. & Beaudry, C. (2013). Multiple-round timber auction design and simulation. International Journal of Production Economics, 146(1), p. 129-141.

Farooq, B., Miller, E. J. & Haider, M. (2013). A multidimensional decisions modeling framework for built space supply. Journal of Transport and Land Use, 6(3).

Fattah-alhosseini, A., Keshavarz, M. K., Masomi, A. & Marianaji, S. (2015). Semiconducting behavior of pure copper in alkaline solutions. Egyptian Journal of Petroleum, 24(4), p. 405-409.

Faucheux, P. A., Gosselin, F. P. & Lévesque, M. (2018). Simulating shot peen forming with Eigenstrains. Journal of Materials Processing Technology, 254, p. 135-144.

Faundez-Zanuy, M., Fierrez, J., Ferrer, M. A., Diaz, M., Tolosana, R. & Plamondon, R. (2020). Handwriting Biometrics: Applications and Future Trends in e-Security and e-Health. Cognitive Computation, 12(5), p. 940-953.

Faure, B. & Marleau, G. (2017). Simulation of a sodium fast core: Effect of B 1 leakage models on group constant generation. Annals of Nuclear Energy, 99, p. 484-494.

Fauteux, C., Khakani, M. A. E., Pegna, J. & Therriault, D. (2009). Influence of solution parameters for the fast growth of ZnO nanostructures by laser-induced chemical liquid deposition. Applied Physics A, 94(4), p. 819-829.

Fayad, P. B., Zamyadi, A., Broseus, R., Prévost, M. & Sauvé, S. (2013). Degradation of progestagens by oxidation with potassium permanganate in wastewater effluents. Chemistry Central Journal, 7.

Fedorov, D. & Birglen, L. (2018). Differential noncircular pulleys for cable robots and static balancing. Journal of Mechanisms and Robotics, 10(6), p. 1-8.

Fedorov, D. & Birglen, L. (2018). Geometric optimization of a self-adaptive robotic leg. Transactions of the Canadian Society for Mechanical Engineering, 42(1), p. 49-60.

Ferrero, G., Bichai, F. & Rusca, M. (2018). Experiential learning through role-playing: Enhancing stakeholder collaboration in water safety plans. Water, 10(2).

Fesharaki, F., Djerafi, T., Chaker, M. & Wu, K. (2018). Guided-wave properties of mode-selective transmission line. IEEE Access, 6, p. 5379-5392.

Figueroa, I. C., Cimmino, M., Drgoňa, J. & Helsen, L. (2021). Fluid temperature predictions of geothermal borefields using load estimations via state observers. Journal of Building Performance Simulation, 14(1).

Fong, D., Gregoire-Gelinas, P., Cheng, A. P., Mezheritsky, T., Lavertu, M., Sato, S. & Hoemann, C. D. (2017). Lysosomal rupture induced by structurally distinct chitosans either promotes a type 1 IFN response or activates the inflammasome in macrophages. Biomaterials, 129, p. 127-138.

Fosso Wamba, S., Lefebvre, L. A. & Lefebvre, E. (2007). Integrating RFID technology and EPC network into a B2B retail supply chain: a step toward intelligent business processes. Journal of Technology Management & Innovation, 2(2), p. 114-124.

Fradet, L., Arnoux, P.-J., Callot, V. & Petit, Y. (2016). Geometrical variations in white and gray matter affect the biomechanics of spinal cord injuries more than the arachnoid space. Advances in Mechanical Engineering, 8(8), p. 168781401666470.

Fraser, S. A., Dupuy, O., Pouliot, P., Lesage, F. & Bherer, L. (2016). Comparable cerebral oxygenation patterns in younger and older adults during dual-task walking with increasing load. Frontiers in Aging Neuroscience, 8, p. 1-9.

Frédette, C., Comeau, Y. & Brisson, J. (2019). Ecophysiological Responses of a Willow Cultivar (Salix miyabeana ‘SX67’) Irrigated with Treated Wood Leachate. Water, Air, & Soil Pollution, 230(8).

Frédette, C., Grebenshchykova, Z., Comeau, Y. & Brisson, J. (2019). Evapotranspiration of a willow cultivar (Salix miyabeana SX67) grown in a full-scale treatment wetland. Ecological Engineering, 127, p. 254-262.

Frédette, C., Labrecque, M., Comeau, Y. & Brisson, J. (2019). Willows for environmental projects: A literature review of results on evapotranspiration rate and its driving factors across the genus Salix. Journal of Environmental Management, 246, p. 526-537.

Freitas, M., Ben Ftima, M., Léger, P. & Bouaanani, N. (2022). Three-dimensional failure envelope of concrete dam shear keys. Engineering Structures, 269. Item availablity restricted.

Freitas, M., Favre, E., Léger, P. & Pedroso, L. J. (2021). Stability Evaluation of Overtopped Concrete Hydraulic Structures Using Computational Fluid Dynamics. Canadian Journal of Civil Engineering, 48(3), p. 341-346.

Fu, T., Stipancic, J., Zangenehpour, S., Miranda-Moreno, L. & Saunier, N. (2017). Automatic traffic data collection under varying lighting and temperature conditions in multimodal environments: thermal versus visible spectrum video-based systems. Journal of Advanced Transportation, 2017, p. 1-15.

Fuamba, M., Branger, F., Braud, I., Batchabani, E., Sanzana, P., Sarrazin, B. & Jankowfsky, S. (2019). Value of distributed water level and soil moisture data in the evaluation of a distributed hydrological model: Application to the PUMMA model in the Mercier catchment (6.6 km2) in France. Journal of Hydrology: Regional Studies, 569, p. 753-770.

G

Gad-El-Hak, I. (2019). Fluid-structure interaction for biomimetic design of an innovative lightweight turboexpander. Biomimetics, 4(1).

Gaens, W. V., Iseni, S., Schmidt-Bleker, A., Weltmann, K. D., Reuter, S. & Bogaerts, A. (2015). Numerical analysis of the effect of nitrogen and oxygen admixtures on the chemistry of an argon plasma jet operating at atmospheric pressure. New Journal of Physics, 17(3).

Gagliano, L., Bou Assi, E., Nguyen, D. K. & Sawan, M. (2019). Bispectrum and recurrent neural networks: Improved classification of interictal and preictal states. Scientific Reports, 9.

Gagné-Boisvert, L. & Bernier, M. (2018). Integrated model for comparison of one- and two-pipe ground-coupled heat pump network configurations. Science and Technology for the Built Environment, 24(7), p. 726-742.

Gagnon-Ouellette, C. & Fuamba, M. (2016). Discussion of "Role of Watershed Geomorphic Characteristics on Flooding in Indiana, United States" by Kuk-Hyun Ahn and Venkatesh Merwade. Journal of Hydrologic Engineering, 21(9), 07016011.

Gao, S., Al-Khalili, D., Langlois, J. M. P. & Chabini, N. (2017). Efficient realization of BCD multipliers using FPGAs. International Journal of Reconfigurable Computing, 2017.

Garoosi, F. & Mahdi, T.-F. (2022). New benchmark problems for validation and verification of incompressible multi-fluid flows based on the improved Volume-Of-Fluid (VOF) method. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 648. Item availablity restricted.

Garoosi, F. & Mahdi, T.-F. (2022). Numerical simulation of three-fluid Rayleigh-Taylor instability using an enhanced Volume-Of-Fluid (VOF) model: New benchmark solutions. Computers & Fluids, 245. Item availablity restricted.

Garoosi, F. & Mahdi, T.-F. (2021). Presenting a novel higher-order bounded convection scheme for simulation of multiphase flows and convection heat transfer. International Journal of Heat and Mass Transfer, 172. Item availablity restricted.

Garoosi, F., Merabtene, T. & Mahdi, T.-F. (2022). Numerical simulation of merging of two rising bubbles with different densities and diameters using an enhanced Volume-Of-Fluid (VOF) model. Ocean Engineering, 247. Item availablity restricted.

Gaudreault, J., Liberelle, B., Durocher, Y., Henry, O. & De Crescenzo, G. (2021). Determination of the composition of heterogeneous binder solutions by surface plasmon resonance biosensing. Scientific Reports, 11.

Gebai, M. & Dagenais, M. R. (2018). Survey and analysis of kernel and userspace tracers on Linux : design, implementation, and overhead. ACM Computing Surveys, 51(2), 26:1-26:33.

Gebai, M., Giraldeau, F. & Dagenais, M. R. (2014). Fine-grained preemption analysis for latency investigation across virtual machines. Journal of Cloud Computing : Advances, Systems and Applications, 3.

Gelin, S., Champagne-Ruel, A. & Mousseau, N. (2020). Enthalpy-entropy compensation of atomic diffusion originates from softening of low frequency phonons. Nature Communications, 11.

Gertz, E., Hiekkalinna, T., Le Digabel, S., Audet, C., Terwilliger, J. D. & Schäffer, A. A. (2014). PSEUDOMARKER 2.0: efficient computation of likelihoods using NOMAD. BMC Bioinformatics, 15.

Gervais, B., Vadean, A., Raison, M. & Brochu, M. (2016). Failure analysis of a 316L stainless steel femoral orthopedic implant. Case Studies in Engineering Failure Analysis, 5-6, p. 30-38.

Gervais, J., Périé-Curnier, D., Parent, S., Labelle, H. & Aubin, C.-É. (2012). MRI signal distribution within the intervertebral disc as a biomarker of adolescent idiopathic scoliosis and spondylolisthesis. BMC Musculoskeletal Disorders, 13.

Ghaemi, M. S., DiGiulio, D. B., Contrepois, K., Callahan, B., Ngo, T. T. M., Lee-McMullen, B., ... Aghaeepour, N. (2019). Multiomics modeling of the immunome, transcriptome, microbiome, proteome and metabolome adaptations during human pregnancy. Bioinformatics, 35(1), p. 95-103.

Ghafouri, M., Karaagac, U., Karimi, H. & Mahseredjian, J. (2019). Robust subsynchronous interaction damping controller for DFIG-based wind farms. Journal of Modern Power Systems and Clean Energy, 7(6), p. 1663-1674.

Ghafouri, M., Karaagac, U., Kocar, I., Xu, Z. & Farantatos, E. (2021). Analysis and mitigation of the communication delay impacts on wind farm central SSI damping controller. IEEE Access, 9, p. 105641-105650.

Ghali, H., Bianucci, P. & Peter, Y.-A. (2017). Wavelength shift in a whispering gallery microdisk due to bacterial sensing: a theoretical approach. Sensing and Bio-Sensing Research, 13, p. 9-16.

Ghali, H., Bianucci, P. & Peter, Y.-A. (2017). Wavelength shift in a whispering gallery microdisk due to bacterial sensing: A theoretical approach. Sensing and Bio-Sensing Research, 13, p. 9-16.

Ghali, H., Chibli, H., Nadeau, J. L., Bianucci, P. & Peter, Y.-A. (2016). Real-time detection of Staphylococcus aureus using whispering gallery mode optical microdisks. Biosensors, 6(2), p. 1-9.

Ghane Motlagh, B., Choueib, M., Hajhosseini Mesgar, A., Hasanuzzaman, M. & Sawan, M. (2016). Direct growth of carbon nanotubes on new high-density 3D pyramid-shaped microelectrode arrays for brain-machine interfaces. Micromachines, 7(9), p. 1-17.

Gheribi, A. E. & Chartrand, P. (2019). Temperature and oxygen adsorption coupling effects upon the surface tension of liquid metals. Scientific Reports, 9.

Gheribi, A. E., Gardarein, J.-L., Rigollet, F. & Chartrand, P. (2014). Evidence of second order transition induced by the porosity in the thermal conductivity of sintered metals. APL Materials, 2(7).

Ghorbaniaghdam, A., Chen, J., Henry, O. & Jolicoeur, M. (2014). Analyzing Clonal Variation of Monoclonal Antibody-Producing CHO Cell Lines Using an In Silico Metabolomic Platform. PLOS One, 9(3).

Gilli, Q., Mustapha, K., Frayret, J.-M., Lahrichi, N. & Karimi, E. (2017). Patient model for colon and colorectal cancer care trajectory simulation. Health Science Journal, 11(6).

Giraldeau, F. & Dagenais, M. R. (2016). Wait analysis of distributed systems using kernel tracing. IEEE Transactions on Parallel and Distributed Systems, 27(8), p. 2450-2461.

Girard, F., Kavalec, C. & Cheriet, F. (2018). Statistical atlas-based descriptor for an early detection of optic disc abnormalities. Journal of Medical Imaging, 5(1).

Girard, S. R., Legault, V., Bois, G. & Boland, J.-F. (2019). Avionics graphics hardware performance prediction with machine learning. Scientific Programming, 2019.

Goeury, K., Vo Duy, S., Munoz, G., Prévost, M. & Sauvé, S. (2019). Data supporting the optimization of liquid chromatography tandem mass spectrometry conditions to analyze EPA-priority hormones and bisphenol A in water samples. Data in Brief, 24.

Goffaux, G., Hammami, I. & Jolicoeur, M. (2017). A dynamic metabolic flux analysis of myeloid-derived suppressor cells confirms immunosuppression-related metabolic plasticity. Scientific Reports, 7(1).

Goffaux, G., Hammami, I. & Jolicoeur, M. (2017). A dynamic metabolic flux analysis of myeloid-derived suppressor cells confirms immunosuppression-related metabolic plasticity. Scientific Reports, 7.

Golshan, S., Rabiee, R., Shams, A., Hoballah, R., Maheshwari, P., Jafari, R., ... Blais, B. (2021). On the volume of fluid simulation details and droplet size distribution insider rotating packed beds. Industrial & Engineering Chemistry Research, 60(24), p. 8888-8900.

Gonçalves-e-Silva, K., Aloise, D., Xavier-De-Souza, S. & Mladenović, N. (2018). Less is more: simplified Nelder-Mead method for large unconstrained optimization. Yugoslav Journal of Operations Research, 28(2), p. 153-169.

Gotra, A., Sivakumaran, L., Chartrand, G., Vu, K.-N., Vandenbroucke-Menu, F., Kauffmann, C., ... Tang, A. (2017). Liver segmentation: indications, techniques and future directions. Insights into Imaging, 8(4), p. 377-392.

Goulet, J.-A. (2017). Bayesian dynamic linear models for structural health monitoring. Structural Control and Health Monitoring, 24(12), e2035.

Goulet, J.-A., Coutu, S. & Smith, I. F.C. (2013). Model falsification diagnosis and sensor placement for leak detection in pressurized pipe networks. Advanced Engineering Informatics, 27(2), p. 261-269.

Goulet, J.-A., Kiureghian, A. D. & Li, B. (2015). Pre-posterior optimization of sequence of measurement and intervention actions under structural reliability constraint. Structural Safety, 52, p. 1-9.

Goulet, J.-A. & Koo, K. (2018). Empirical validation of bayesian dynamic linear models in the context of structural health monitoring. Journal of Bridge Engineering, 23(2), p. 1-15.

Goulet, J.-A., Kripakaran, P. & Smith, I. F. C. (2010). Multimodel structural performance monitoring. Journal of Structural Engineering, 136(10), p. 1309-1318.

Goulet, J.-A., Michel, C. & Kiureghian, A. D. (2015). Data-driven post-earthquake rapid structural safety assessment. Earthquake Engineering & Structural Dynamics, 44(4), p. 549-562.

Goulet, J.-A., Michel, C. & Smith, I. F.C. (2013). Hybrid probabilities and error-domain structural identification using ambient vibration monitoring. Mechanical Systems and Signal Processing, 37(1-2), p. 199-212.

Goulet, J.-A. & Smith, I. F. C. (2013). Performance-driven measurement system design for structural identification. Journal of Computing in Civil Engineering, 27(4), p. 427-436.

Goulet, J.-A. & Smith, I. F. C. (2013). Predicting the usefulness of monitoring for identifying the behavior of structures. Journal of Structural Engineering, 139(10), p. 1716-1727.

Goulet, J.-A. & Smith, I. F.C. (2013). Structural identification with systematic errors and unknown uncertainty dependencies. Computers & Structures, 128, p. 251-258.

Goulet, J.-A., Texier, M., Michel, C., Smith, I. F. C. & Chouinard, L. (2014). Quantifying the effects of modeling simplifications for structural identification of bridges. Journal of Bridge Engineering, 19(1), p. 59-71.

Goyette, P.-A., Boulais, É., Normandeau, F., Laberge, G., Juncker, D. & Gervais, T. (2019). Microfluidic multipoles theory and applications. Nature Communications, 10.

Grebenshchykova, Z., Brisson, J., Chazarenc, F. & Comeau, Y. (2020). Two-year performance of single-stage vertical flow treatment wetlands planted with willows under cold-climate conditions. Ecological Engineering, 153.

Grmela, M. (2014). Contact geometry of mesoscopic thermodynamics and dynamics. Entropy, 16(3), p. 1652-1686.

Grmela, M. (2018). GENERIC guide to the multiscale dynamics and thermodynamics. Journal of Physics Communications, 2(3).

Grmela, M. (2015). Geometry of Multiscale Nonequilibrium Thermodynamics. Entropy, 17(9), p. 5938-5964.

Grmela, M. (2016). Role of thermodynamics in extensions of mesoscopic dynamical theories. Communications in Applied and Industrial Mathematics, 7(2), p. 56-80.

Grmela, M. (2016). Role of thermodynamics in extensions of mesoscopic dynamical theories. Communications in Applied and Industrial Mathematics, 7(2), p. 56-80.

Grmela, M., Grazzini, G., Lucia, U. & Yahia, L. (2013). Multiscale Mesoscopic Entropy of Driven Macroscopic Systems. Entropy, 15(11), p. 5053-5064.

Groleau, G., Tanguay-Rioux, F., Spreutels, L., Héroux, M. & Legros, R. (2019). Development of a MSW gasification model for flexible integration into a MFA-LCA framework. Detritus, 7, p. 44-54.

Gu, J., Walther, V., Waldecker, L., Rhodes, D., Raja, A., Hone, J. C., ... Menon, V. M. (2021). Enhanced nonlinear interaction of polaritons via excitonic Rydberg states in monolayer WSe2. Nature Communications, 12(1).

Guay-Lord, R., Attendu, X., Lurie, K. L., Majeau, L., Godbout, N., Ellerbee Bowden, A. K., ... Boudoux, C. (2016). Combined optical coherence tomography and hyperspectral imaging using a double-clad fiber coupler. Journal of Biomedical Optics, 21(11), 116008-1-116008-6.

Guérin, N., Lévesque, M. & Therriault, D. (2014). Helical dielectrophoretic particle separator fabricated by conformal spindle printing. Journal of Biomedical Science and Engineering, 7(9), p. 641-650.

Guertin, R., Bianki, M.-A., Lemieux-Leduc, C. & Peter, Y.-A. (2021). Multi-gas detection using Fabry-Perot interferometers on silicon chip. Sensors and Actuators B: Chemical, 335. Item availablity restricted.

Guevara, E., Berti, R., Londono, I., Xie, N., Bellec, P., Lesage, F. & Lodygensky, G. A. (2013). Imaging of an inflammatory injury in the newborn rat brain with photoacoustic tomography. PLOS One, 8(12).

Guevara, E., Pierre, W. C., Tessier, C., Akakpo, L., Londono, I., Lesage, F. & Lodygensky, G. A. (2017). Altered functional connectivity following an inflammatory white matter injury in the newborn rat: A high spatial and temporal resolution intrinsic optical imaging study. Frontiers in Neuroscience, 11.

Guevara, E., Pouliot, P., Nguyen, D. K. & Lesage, F. (2013). Optical imaging of acute epileptic networks in mice. Journal of Biomedical Optics, 18(7), 76021-1-76021-8.

Guo, S., Gosselin, F., Guérin, N., Lanouette, A.-M., Heuzey, M.-C. & Therriault, D. (2013). Solvent-cast three-dimensional printing of multifunctional microsystems. Small, 9(24), p. 4118-4122.

Guo, S., Heuzey, M.-C. & Therriault, D. (2014). Properties of polylactide inks for solvent-cast printing of three-dimensional freeform microstructures. Langmuir, 30(4), p. 1142-1150.

Guy, A., Labelle, H., Barchi, S., Audet-Duchesne, E., Cobetto, N., Parent, S., ... Aubin, C.-É. (2021). Braces Designed Using CAD/CAM Combined or Not With Finite Element Modeling Lead to Effective Treatment and Quality of Life After 2 Years : A Randomized Controlled Trial. Spine, 46(1), p. 9-16.

Gyuráki, R., Benkel, T., Schreiner, F., Sirois, F. & Grilli, F. (2019). Fluorescent thermal imaging of a non-insulated pancake coil wound from high temperature superconductor tape. Superconductor Science and Technology, 32(10).

H

Habert, S., Eck, U., Fallavollita, P., Parent, S., Navab, N. & Cheriet, F. (2017). Application of an RGBD augmented C-arm for minimally invasive scoliosis surgery assistance. Healthcare Technology Letter, 4(5), p. 179-183.

Habibey, R., Latifi, S., Mousavi, H., Pesce, M., Arab-Tehrany, E. & Blau, A. (2017). A multielectrode array microchannel platform reveals both transient and slow changes in axonal conduction velocity. Scientific Reports, 7(1).

Haddad, M. & Barbeau, B. (2019). Hybrid hollow fiber nanofiltration-calcite contactor: A novel point-of-entry treatment for removal of dissolved Mn, Fe, NOM and hardness from domestic groundwater supplies. Membranes, 9(7).

Haddad, T., Noël, S., Liberelle, B., El Ayoubi, R., Ajji, A. & De Crescenzo, G. (2016). Fabrication and surface modification of poly lactic acid (PLA) scaffolds with epidermal growth factor for neural tissue engineering. Biomatter, 6(1).

Haddadi, A., Kocar, I., Kauffmann, T., Karaagac, U., Farantatos, E. & Mahseredjian, J. (2019). Field validation of generic wind park models using fault records. Journal of Modern Power Systems and Clean Energy, 7(4), p. 826-836.

Hadji, A. & Mureithi, N. (2019). Validation of friction model parameters identified using the IHB method using finite element method. Shock and Vibration, 2019.

Hadjizadeh, A., Savoji, H. & Ajji, A. (2016). A Facile Approach for the Mass Production of Submicro/Micro Poly (Lactic Acid) Fibrous Mats and Their Cytotoxicity Test towards Neural Stem Cells. BioMed Research International, 2016.

Hadoux, X., Hui, F., Lim, J. K. H., Masters, C. L., Pébay, A., Chevalier, S., ... van Wijngaarden, P. (2019). Non-invasive in vivo hyperspectral imaging of the retina for potential biomarker use in Alzheimer's disease. Nature Communications, 10.

Hafnaoui, I., Ayari, R., Nicolescu, G. & Beltrame, G. (2017). Scheduling real-time systems with cyclic dependence using data criticality. Design Automation for Embedded Systems, 21(2), p. 117-136.

Hafnaoui, I., Nicolescu, G. & Beltrame, G. (2019). Timing information propagation in interactive networks. Scientific Reports, 9.

Hajj-Hassan, M., Gonzalez, T., Ghafar-Zadeh, E., Djeghelian, H., Chodavarapu, V., Andrews, M. & Therriault, D. (2008). Direct-Dispense Polymeric Waveguides Platform for Optical Chemical Sensors. Sensors, 8(12).

Hammami, I., Chen, J., Murschel, F., Bronte, V., De Crescenzo, G. & Jolicoeur, M. (2012). Immunosuppressive activity enhances central carbon metabolism and bioenergetics in myeloid-derived suppressor cells in vitro models. BMC Cell Biology, 13.

Hammoud, R., Boukhili, R. & Yahia, A. (2013). Unified formulation for a triaxial elastoplastic constitutive law for concrete. Materials, 6(9), p. 4226-4248.

Hamzehlouia, S., Jaffer, S. A. & Chaouki, J. (2018). Microwave heating-assisted catalytic dry reforming of methane to syngas. Scientific Reports, 8.

Harmouche, R., Cheriet, F., Labelle, H. & Dansereau, J. (2013). Multimodal image registration of the scoliotic torso for surgical planning. BMC Medical Imaging, 13.

Harrisson, G. & Marleau, G. (2013). Simulation strategy for the evaluation of neutronic properties of a Canadian SCWR fuel channel. Science and Technology of Nuclear Installations, 2013, p. 1-10.

Harvey, J.-P., Singh, S., Oishi, K., Acheson, B., Turcotte, R., Pilon, D., ... Grange, B. (2021). Quantification of the chemical reactivity of molten nitrate salts with heat treatable aluminum alloys. Materials & Design, 198.

Harvey, V. C., Farand, P., Legros, R. & Tavares, J. R. (2015). On the average perception of perceived averages. Education for Chemical Engineers, 12, p. 12-19.

Hashemiboroujeni, H., Esmaeili Marzdashti, S., Xing, K. & Mayer, R. (2019). Five-axis machine tool coordinate metrology evaluation using the ball dome artefact before and after machine calibration. Journal of Manufacturing and Materials Processing, 3(1).

Hassan, A., Ali, M., Trigui, A., Savaria, Y. & Sawan, M. (2019). A GaN-based wireless monitoring system for high-temperature applications. Sensors, 19(8).

Hassan, A., Bagu, E. T., Lévesque, M., Patten, S. A., Benhadjeba, S., Edjekouane, L., ... Moldovan, F. (2019). The 17β-estradiol induced upregulation of the adhesion G-protein coupled receptor (ADGRG7) is modulated by ESRα and SP1 complex. Biology Open, 8(1).

Hassan, A., Parent, S., Mathieu, H., Zaouter, C., Molidperee, S., Bagu, E. T., ... Moldovan, F. (2019). Adolescent idiopathic scoliosis associated POC5 mutation impairs cell cycle, cilia length and centrosome protein interactions. PLOS One, 14(3).

Hatam, F., Blokker, M., Besner, M.-C., Ebacher, G. & Prévost, M. (2019). Using nodal infection risks to guide interventions following accidental intrusion due to sustained low pressure events in a drinking water distribution system. Water, 11(7).

Hébert, A. (2017). Acceleration of step and linear discontinuous schemes for the method of characteristics in DRAGON5. Nuclear Engineering and Technology, 49(6), p. 1135-1142.

Hébert, A. (2021). Application of the augmented block Householder Arnoldi method to the calculation of non-fundamental modes of the diffusion equation. Annals of Nuclear Energy, 151.

Hébert-Lavoie, M., Doyon-Poulin, P. & Ozell, B. (2022). Identification of visual functional thresholds for immersion assessment in virtual reality. PRESENCE: Virtual and Augmented Reality, 29. Item availablity restricted.

Heidari, P. & Boucheneb, H. (2013). Controller synthesis of time petri nets using stopwatch. Journal of Engineering, 2013, p. 1-13.

Hertwich, E., Heeren, N., Kuczenski, B., Majeau-Bettez, G., Myers, R. J., Pauliuk, S., ... Lifset, R. (2018). Nullius in Verba: Advancing data transparency in industrial ecology. Journal of Industrial Ecology, 22(1), p. 6-17.

Hertz, A., Marcotte, O. & Schindl, D. (2014). On the maximum orders of an induced forest, an induced tree, and a stable set. Yugoslav Journal of Operations Research, 24(2), p. 199-215.

Hertz, A. & Ries, B. (2014). A note on r-equitable k-colorings of trees. Yugoslav Journal of Operations Research, 24(2), p. 293-298.

Hoemann, C. D., Guzmán-Morales, J., Tran-Khanh, N., Lavallée, G., Jolicoeur, M. & Lavertu, M. (2013). Chitosan rate of uptake in HEK293 cells is influenced by soluble versus microparticle state and enhanced by serum-induced cell metabolism and lactate-based media acidification. Molecules, 18(1), p. 1015-1035.

Hosseininasab, S., Faucheux, N., Soucy, G. & Tavares, J. R. (2017). Full range of wettability through surface modification of single-wall carbon nanotubes by photo-initiated chemical vapour deposition. Chemical Engineering Journal, 325, p. 101-113.

Hosseininasab, S., Faucheux, N., Soucy, G. & Tavares, J. R. (2019). Reaction kinetics and temperature effects in syngas photo-initiated chemical vapor deposition on single-walled carbon nanotubes. Journal of Nanoparticle Research, 21(6).

Hou, Y., Liu, J. R., Buchanan, M., Thorpe, A. J. S., Poole, P. J., Liu, H. C., ... Zhang, X. P. (2012). Terahertz Generation Using Implanted InGaAs Photomixers and Multi-wavelength Quantum Dot Lasers. Nano-Micro Letters, 4(1), p. 10-13.

Houeto, F. & Pierre, S. (2007). Jitter characterization in admission control and pricing issues in integrated multiservice networks. Journal of Computer Science, 3(12), p. 965-979.

Houssard, C., Revéret, J.-P., Maxime, D., Pouliot, Y. & Margni, M. (2022). Measuring shared value creation with eco-efficiency: Development of a multidimensional value framework for the dairy industry. Journal of Cleaner Production. Item availablity restricted.

Hung, C. R., Ellingsen, L. A.-W. & Majeau-Bettez, G. (2020). LiSET: A framework for early-stage life cycle screening of emerging technologies. Journal of Industrial Ecology, 24(1), p. 26-37.

Hung, C. R., Völler, S., Agez, M., Majeau-Bettez, G. & Strømman, A. H. (2021). Regionalized climate footprints of battery electric vehicles in Europe. Journal of Cleaner Production, 322, p. 129052.

Hussain, S. A., Perrier, M. & Tartakovsky, B. (2018). Long-term performance of a microbial electrolysis cell operated with periodic disconnection of power supply. RSC Advances, 8(30), p. 16842-16849.

I

Iezzi, V. L., Büttner, T. F. S., Tehranchi, A., Loranger, S., Kabakova, I. V., Eggleton, B. J. & Kashyap, R. (2016). Temporal characterization of a multi-wavelength Brillouin–erbium fiber laser. New Journal of Physics, 18(5), p. 1-11.

Iglesias‐Juez, A., Chiarello, G. L., Patience, G. S. & Guerrero‐Pérez, M. O. (2021). Experimental methods in chemical engineering: X ‐ray absorption spectroscopy— XAS , XANES , EXAFS. The Canadian Journal of Chemical Engineering, p. 1-20.

Ilia, E., Plamondon, P., Masse, J.-P. & L'Espérance, G. (2019). Copper precipitation at engine operating temperatures in powder-forged connecting rods manufactured with Fe–Cu–C alloys. Materials Science & Engineering A, 767.

Issaad, O., Pierre, S., Ivascu, G. I. & Garcia, O. (2008). A novel approach to modeling and flooding in ad-hoc wireless networks. Journal of Computer Science, 4(12), p. 967-975.

J

Jacobberger, R. M., Kiraly, B., Fortin-Deschenes, M., Levesque, P. L., McElhinny, K. M., Brady, G. J., ... Arnold, M. S. (2015). Direct oriented growth of armchair graphene nanoribbons on germanium. Nature Communications, 6.

Jacobs, M., Benovoy, M., Chang, L.-C., Arai, A. E. & Hsu, L.-Y. (2016). Evaluation of an automated method for arterial input function detection for first-pass myocardial perfusion cardiovascular magnetic resonance. Journal of Cardiovascular Magnetic Resonance, 18, p. 1-11.

Jafari, R., Tanguy, P. A. & Chaouki, J. (2012). Characterization of minimum impeller speed for suspension of solids in liquid at high solid concentration, using gamma-ray densitometry. International Journal of Chemical Engineering, 2012, p. 1-15.

Jaglan, N., Gupta, S. D., Kanaujia, B. K. & Sharawi, M. S. (2021). 10 Element Sub-6-GHz Multi-Band Double-T Based MIMO Antenna System for 5G Smartphones. IEEE Access, 9, p. 118662-118672.

Jaglan, N., Gupta, S. D. & Sharawi, M. S. (2021). 18 Element Massive MIMO/Diversity 5G Smartphones Antenna Design for Sub-6 GHz LTE Bands 42/43 Applications. IEEE Open Journal of Antennas and Propagation, 2, p. 533-545.

Jalbert, J., Murphy, O. A., Genest, C. & Nešlehová, J. G. (2019). Modelling extreme rain accumulation with an application to the 2011 Lake Champlain flood. Journal of the Royal Statistical Society Series C (Applied Statistics), 68(4), p. 831-858.

Jamil Khan, M., Rahman, M.U., Amin, Y. & Tenhunen, H. (2019). Low-rank multi-channel features for robust visual object tracking. Symmetry, 11(9).

Jaouhar, E. M. & Li, L. (2019). Effect of drainage and consolidation on the pore water pressures and total stresses within backfilled stopes and on barricades. Advances in Civil Engineering, 2019.

Javadi, N. & Mahdi, T.-F. (2014). Experimental investigation into rockfill dam failure initiation by overtopping. Natural Hazards, 74(2), p. 623-637.

Javanbakht, T., Bérard, A. & Tavares, J. R. (2016). Polyethylene glycol and poly(vinyl alcohol) hydrogels treated with photo-initiated chemical vapor deposition. Canadian Journal of Chemistry/Revue canadienne de chimie, 94(9), p. 744-750.

Javanbakht, T., Laurent, S., Stanicki, D., Raphael, W. & Tavares, J. R. (2015). Charge effect of superparamagnetic iron oxide nanoparticles on their surface functionalization by photo-initiated chemical vapour deposition. Journal of Nanoparticle Research, 17(12).

Jerbi, A., Brereton, N. J. B., Amiot, S., Lachapelle-Trouillard, X., Comeau, Y., Pitre, F. E. & Labrecque, M. (2020). High biomass yield increases in a primary effluent wastewater phytofiltration are associated to altered leaf morphology and stomatal size in Salix miyabeana. Science of the Total Environment, 738.

Ji, S., Li, L. & Zeng, W. (2018). The relationship between diameter and depth of potholes eroded by running water. Journal of Rock Mechanics and Geotechnical Engineering, 10(5), p. 818-831.

Jimenez-Triana, A., Zhu, G. & Saydy, L. (2014). Output-Feedback Control of a Chaotic MEMS Resonator for Oscillation Amplitude Enhancement. Mathematical Problems in Engineering, 2014, p. 1-13.

Joanis, M. (2014). The politics of chequebook federalism: can electoral considerations affect federal-provincial transfers? SPP Research Papers, 7(25).

John, R. C., Pelton, A. D., Young, A. L., Thompson, W. T., Wright, I. G. & Besmann, T. M. (2004). Assessing corrosion in oil refining and petrochemical processing. Materials Research, 7(1), p. 163-173.

Jolicoeur, M. (2014). Modeling cell behavior: moving beyond intuition. AIMS Bioengineering, 1(1).

Jung, D., Faucher, J., Mukherjee, S., Akey, A., Ironside, D. J., Cabral, M., ... Lee, M. L. (2017). Highly tensile-strained Ge/InAlAs nanocomposites. Nature Communications, 8.

K

Kaddoura, M., Kambanou, M. L., Tillman, A.-M. & Sakao, T. (2019). Is prolonging the lifetime of passive durable products a low-hanging fruit of a circular economy? A multiple case study. Sustainability, 11(18).

Kaddoura, M., Majeau-Bettez, G., Amor, B., Moreau, C. & Margni, M. (2022). Investigating the role of surface engineering in mitigating greenhouse gas emissions of energy technologies: An outlook towards 2100. Sustainable Materials and Technologies, 32. Item availablity restricted.

Kafrouni, L. & Savadogo, O. (2016). Recent progress on magnetic nanoparticles for magnetic hyperthermia. Progress in Biomaterials, 5(3-4), p. 147-160.

Kairy, D., Rushton, P., Archambault, P., Pituch, E., Torkia, C., El Fathi, A., ... Gourdeau, R. (2014). Exploring Powered Wheelchair Users and Their Caregivers’ Perspectives on Potential Intelligent Power Wheelchair Use: A Qualitative Study. International Journal of Environmental Research and Public Health, 11(2).

Karbasforoushan, H., Cohen-Adad, J. & Dewald, J. P. A. (2019). Brainstem and spinal cord MRI identifies altered sensorimotor pathways post-stroke. Nature Communications, 10(1).

Karimi, B., Burlet-Vienney, D., Chinniah, Y. & Aucourt, B. (2019). Design of a self-audit tool for the application of lockout on machinery in the province of Quebec, Canada to control hazardous energies. Safety, 5(3).

Kashyap, R. & Nemova, G. (2009). Surface plasmon resonance-based fiber and planar waveguide sensors. Journal of Sensors, 2009, p. 645162.

Kasparek, E., Tavares, J. R., Wertheimer, M. R. & Girard-Lauriault, P.-L. (2016). Sulfur-rich organic films deposited by plasma- and vacuum-ultraviolet (VUV) photo-polymerization. Plasma Processes and Polymers, 13(9), p. 888-899.

Kasparek, E., Tavares, J. R., Wertheimer, M. R. & Girard-Lauriault, P.-L. (2018). VUV Photodeposition of Thiol-Terminated Films: A Wavelength-Dependent Study. Langmuir, 34(41), p. 12234-12243.

Kasparek, E., Thiry, D., Tavares, J. R., Wertheimer, M. R., Snyders, R. & Girard-Lauriault, P.-L. (2018). Growth mechanisms of sulfur-rich plasma polymers: Binary gas mixtures versus single precursor. Plasma Processes and Polymers, 15(7), p. 1800036.

Kassem, A., Sawan, M., Boukadoum, M. & Haidar, A. (2005). Perception SoC based on an ultrasonic array of sensors : efficient DSP core implementation and subsequent experimental results. EURASIP Journal on Advances in Signal Processing, 2005(7), p. 1071-1081.

Kauppinen, S., Karhula, S. S., Thevenot, J., Ylitalo, T., Rieppo, L., Kestila, I., ... Nieminen, H. J. (2019). 3D morphometric analysis of calcified cartilage properties using micro-computed tomography. Osteoarthritis and Cartilage, 27(1), p. 172-180.

Keivanpour, S., Ait-Kadi, D. & Mascle, C. (2013). Toward a strategic approach to end-of-life aircraft recycling projects : a research agenda in transdisciplinary context. Journal of Management and Sustainability, 3(3), p. 76-94.

Kerzazi, N., Lavallée, M. & Robillard, P. N. (2013). A knowledge-based perspective for software process modeling. e-Informatica Software Engineering Journal, 7(1), p. 25-33.

Kestens, Y., Winters, M., Fuller, D., Bell, S., Berscheid, J., Brondeel, R., ... Wasfi, R. (2019). INTERACT: A comprehensive approach to assess urban form interventions through natural experiments. BMC Public Health, 19.

Kestila, I., Thevenot, J., Finnila, M. A., Karhula, S. S., Hadjab, I., Kauppinen, S., ... Saarakkala, S. (2018). In vitro method for 3D morphometry of human articular cartilage chondrons based on micro-computed tomography. Osteoarthritis and Cartilage, 26(8), p. 1118-1126.

Kevorkov, D., Medraj, M., Aljarrah, M., Li, J., Essadiqi, E., Chartrand, P. & Fuerst, C. (2014). Experimental study of the Al-Mg-Sr phase diagram at 400°C. Journal of Metallurgy, 2014.

Khaddaj Mallat, N., Moldovan, E., Wu, K. & Tatu, S.O. (2009). Millimeter-Wave Ultra-Wideband Six-Port Receiver Using Cross-Polarized Antennas. EURASIP Journal on Wireless Communications and Networking, 2009(1), p. 508678.

Khan, A., Jin, W., Haider, A., Rahman, M.U. & Wang, D. (2021). Adversarial Gaussian Denoiser for Multiple-Level Image Denoising. Sensors, 21(9).

Khan, H., Swati, I. K., Younas, M. & Ullah, A. (2017). Chelated nitrogen-sulphur-codoped TiO₂: synthesis, characterization, mechanistic, and UV/visible photocatalytic studies. International Journal of Photoenergy, 2017.

Khandal, D., Riedl, B., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2019). Tailoring cellulose nanocrystals rheological behavior in aqueous suspensions through surface functionalization with polyethyleneimine. Physics of Fluids, 31(2), 021207.

Khani, Z., Schieppati, D., Bianchi, C. L. & Boffito, D. C. (2019). The sonophotocatalytic degradation of pharmaceuticals in water by MnOₓ-TiO₂ systems with tuned band-gaps. Catalysts, 9(11).

Khatami, M. S., Dehmollaian, M. & Yousefi, L. (2021). Analysis of wave scattering from 2D curved metasurfaces using Floquet and Fourier series expansions. IET Microwaves, Antennas & Propagation, 15(9), p. 981-994.

Khorasany, M., Mishra, Y., Babaki, B. & Ledwich, G. (2019). Enhancing scalability of peer-to-peer energy markets using adaptive segmentation method. Journal of Modern Power Systems and Clean Energy, 7(4), p. 791-801.

Kim, W.-Y., Pelton, A., Bale, C., Bélisle, E. & Decterov, S. (2013). Modeling the viscosity of silicate melts containing manganese oxide. Journal of Mining and Metallurgy, Section B: Metallurgy, 49(3), p. 323-337.

Kim, W.-Y., Pelton, A. D., Bale, C., Bélisle, E. & Decterov, S. A. (2013). Modeling the viscosity of silicate melts containing manganese oxide. Journal of Mining and Metallurgy, Section B: Metallurgy, 49(3), p. 323-337.

Klika, V., Pavelka, M., Vágner, P. & Grmela, M. (2019). Dynamic maximum entropy reduction. Entropy, 21(7).

Koellner, T., de Baan, L., Beck, T., Brandão, M., Civit, B., Margni, M., ... Müller-Wenk, R. (2013). UNEP-SETAC guideline on global land use impact assessment on biodiversity and ecosystem services in LCA. The International Journal of Life Cycle Assessment, 18(6), p. 1188-1202.

Koffler, C., Dettling, J., East, C., Finkbeiner, M., Galeano, S. F., Geyer, R., ... Wagner, C. (2013). Declaration of concern—an unambiguous rebuttal of the LEO-SCS-002 draft standard. International Journal of Life Cycle Assessment, 18(2), p. 302-305.

Kõiv, M., Mahadeo, K., Brient, S., Claveau-Mallet, D. & Comeau, Y. (2016). Treatment of fish farm sludge supernatant by aerated filter beds and steel slag filters—effect of organic loading rate. Ecological Engineering, 94, p. 190-199.

Kosmas, P., Chen, Y. & Martel, S. (2013). A Feasibility Study for Microwave Breast Cancer Detection Using Contrast-Agent-Loaded Bacterial Microbots. International Journal of Antennas and Propagation, 2013, p. 1-11.

Kounina, A., Margni, M., Bayart, J.-B., Boulay, A.-M., Berger, M., Bulle, C., ... Humbert, S. (2013). Review of methods addressing freshwater use in life cycle inventory and impact assessment. The International Journal of Life Cycle Assessment, 18(3), p. 707-721.

Kreitcberg, A., Inaekyan, K., Turenne, S. & Brailovski, V. (2019). Temperature- and time-dependent mechanical behavior of post-treated IN625 alloy processed by laser powder bed fusion. Journal of Manufacturing and Materials Processing, 3(3).

Krishnaiah, K. V., Soares de Lima Filho, E., Ledemi, Y., Nemova, G., Messaddeq, Y. & Kashyap, R. (2016). Development of ytterbium-doped oxyfluoride glasses for laser cooling applications. Scientific Reports, 6, p. 1-12.

Krouchev, N. I., Danner, S. M., Vinet, A., Rattay, F. & Sawan, M. (2014). Energy-Optimal Electrical-Stimulation Pulses Shaped by the Least-Action Principle. PLOS One, 9(3).

Krouchev, N. I., Rattay, F., Sawan, M. & Vinet, A. (2015). From Squid to Mammals with the HH Model through the Nav Channels’ Half-Activation-Voltage Parameter. PLOS One, 10(12).

Kuhn, M. & Napporn, T. (2010). Single-Chamber Solid Oxide Fuel Cell Technology—From Its Origins to Today’s State of the Art. Energies, 3(1), p. 57-134.

Kuhn, M., Napporn, T. W., Meunier, M., Vengallatore, S. & Therriault, D. (2009). Miniaturization limits for single-chamber micro-solid oxide fuel cells with coplanar electrodes. Journal of Power Sources, 194(2), p. 941-949.

Kullar, S. S., Shao, K., Surette, C., Foucher, D., Mergler, D., Cormier, P., ... Bouchard, M. F. (2019). A benchmark concentration analysis for manganese in drinking water and IQ deficits in children. Environment International, 130.

L

La Barbera, L., Cianfoni, A., Ferrari, A., Distefano, D., Bonaldi, G. & Villa, T. (2019). Stent-screw assisted internal fixation of osteoporotic vertebrae: A comparative finite element analysis on SAIF technique. Frontiers in Bioengineering and Biotechnology, 7.

La Barbera, L., Larson, A. N. & Aubin, C.-É. (2021). Correction objectives have higher impact than screw pattern and density on the optimal 3D correction of thoracic AIS: a biomechanical study. Spine Deformity, 9(3), p. 655-664.

Labelle, A. & Frayret, J.-M. (2018). Agent-based model for end-of-life product flow analysis. Resources, 7(3), p. 1-20.

Labelle, M.-A., Dold, P. L. & Comeau, Y. (2015). Mechanisms for Reduced Excess Sludge Production in the Cannibal Process. Water Environment Research, 87(8), p. 687-696.

Laberge Lebel, L., Aïssa, B., El Khakani, M. A. & Therriault, D. (2010). Preparation and mechanical characterization of laser ablated single-walled carbon-nanotubes/polyurethane nanocomposite microbeams. Composites Science and Technology, 70(3), p. 518-524.

Laberge Lebel, L., Aïssa, B., Paez, O. A., El Khakani, M. A. & Therriault, D. (2009). Three-dimensional micro structured nanocomposite beams by microfluidic infiltration. Journal of Micromechanics and Microengineering, 19(12).

Labonté, V., Marion, A., Virgilio, N. & Tavares, J. R. (2016). Gas-phase surface engineering of polystyrene beads used to challenge automated particle inspection systems. Industrial & Engineering Chemistry Research, 55(27), p. 7362-7372.

Lachapelle-Trouillard, X., Labrecque, M. & Comeau, Y. (2019). Treatment and valorization of a primary municipal wastewater by a short rotation willow coppice vegetation filter. Ecological Engineering, 130, p. 32-44.

Lafantaisie-Favreau, C.-H., Guzmán-Morales, J., Sun, J., Chen, G., Harris, A., Smith, T. D., ... Hoemann, C. D. (2013). Subchondral pre-solidified chitosan/blood implants elicit reproducible early osteochondral wound-repair responses including neutrophil and stromal cell chemotaxis, bone resorption and repair, enhanced repair tissue integration and delayed matrix deposition. BMC Musculoskeletal Disorders, 14.

Lafaye, P., Oishi, K., Bourdon, M. & Harvey, J.-P. (2022). Crystal chemistry and thermodynamic modelling of the Al₁₃(Fe,TM)₄ solid solutions (TM = Co, Cr, Ni, Pt). Journal of Alloys and Compounds. Item availablity restricted.

Laferrière, A., Cimmino, M., Picard, D. & Helsen, L. (2020). Development and validation of a full-time-scale semi-analytical model for the short- and long-term simulation of vertical geothermal bore fields. Geothermics, 86.

Laflaquière, B., Leclercq, G., Choey, C., Chen, J., Peres, S., Ito, C. & Jolicoeur, M. (2018). Identifying biomarkers of Wharton's Jelly mesenchymal stromal cells using a dynamic metabolic model: the cell passage effect. Metabolites, 8(1).

Lafortune, P., Aubin, C.-É., Boulanger, H., Villemure, I., Bagnall, K. M. & Moreau, A. (2007). Biomechanical simulations of the scoliotic deformation process in the pinealectomized chicken: a preliminary study. Scoliosis and Spinal Disorders, 2, p. 16.

Lafrance, S. (2004). Symbolic approach to the analysis of security protocols. Journal of Universal Computer Science, 10(9), p. 1156-1198.

Lafrance, S. & Mullins, J. (2003). An information flow method to detect denial of service vulnerabilities. Journal of Universal Computer Science, 9(11), p. 1350-1369.

Lajeunesse, A., Blais, M., Barbeau, B., Sauvé, S. & Gagnon, C. (2013). Ozone oxidation of antidepressants in wastewater – Treatment evaluation and characterization of new by-products by LC-QToFMS. Chemistry Central Journal, 7.

Lakiza, V. & Deschamps, I. (2019). How to develop an impactful action research program: Insights and lessons from a case study. Technology Innovation Management Review, 9(5), p. 34-43.

Lakiza, V. & Deschamps, I. (2018). How to develop innovation KPIs in an execution-oriented company. Technology Innovation Management Review, 8(7), p. 14-30.

Lalancette, C., Charron, D., Laferriere, C., Dolce, P., Déziel, É., Prévost, M. & Bédard, É. (2017). Hospital drains as reservoirs of Pseudomonas aeruginosa: Multiple-locus variable-number of tandem repeats analysis genotypes recovered from faucets, sink surfaces and patients. Pathogens, 6(3).

Lam, T., Avti, P. K., Pouliot, P., Maafi, F., Tardif, J.-C., Rhéaume, É., ... Kakkar, A. (2016). Fabricating water dispersible superparamagnetic iron oxide nanoparticles for biomedical applications through ligand exchange and direct conjugation. Nanomaterials, 6(6), p. 1-15.

Lange Di Cesare, K., Zouaq, A., Gagnon, M. & Jean-Louis, L. (2018). A machine learning filter for the slot filling task. Information, 9(6).

Langot, J., Chávez‐Gómez, P., Lévesque, M. & Robert, É. (2022). Modeling the thermal decomposition and residual mass of a carbon fiber epoxy matrix composite with a phenomenological approach: Effect of the reaction scheme. Fire and Materials, 46(1), p. 262-276.

Lapointe, J. & Kashyap, R. (2017). A simple technique to overcome self-focusing, filamentation, supercontinuum generation, aberrations, depth dependence and waveguide interface roughness using fs laser processing. Scientific Reports, 7.

Lapointe, M., Brosseau, C., Comeau, Y. & Barbeau, B. (2017). Assessing Alternative Media for Ballasted Flocculation. Journal of Environmental Engineering, 143(11).

Lauzon, M.-A., Drevelle, O. & Faucheux, N. (2017). Peptides derived from the knuckle epitope of BMP-9 induce the cholinergic differentiation and inactivate GSk3beta in human SH-SY5Y neuroblastoma cells. Scientific Reports, 7.

Lavallée, M. & Robillard, P. N. (2018). Are we working well with others? How the multi team systems impact software quality. e-Informatica Software Engineering Journal, 12(1), p. 117-131.

Lavoie, B. & Mahdi, T.-F. (2017). Comparison of two-dimensional flood propagation models: SRH-2D and Hydro_AS-2D. Natural Hazards, 86(3), p. 1207-1222.

Lavoie, B. & Mahdi, T.-F. (2020). Manning's roughness coefficient determination in laboratory experiments using 2D modeling and automatic calibration. La Houille Blanche (1), p. 22-33.

Lavoie-Cardinal, F., Salesse, C., Bergeron, É., Meunier, M. & De Koninck, P. (2016). Gold nanoparticle-assisted all optical localized stimulation and monitoring of Ca2+ signaling in neurons. Scientific Reports, 6, p. 1-9.

Lavrukhin, D. V., Yachmenev, A. E., Glinskiy, I. A., Khabibullin, R. A., Goncharov, Y. G., Ryzhii, M., ... Ponomarev, D. S. (2019). Terahertz photoconductive emitter with dielectric-embedded high-aspect-ratio plasmonic grating for operation with low-power optical pumps. AIP Advances, 9.

Le Cunff, C., Biolley, F., Fontaine, E., Étienne, S. & Facchinetti, M. L. (2002). Vortex-induced vibrations of risers: theoretical, numerical and experimental investigation. Oil & gas science and technology, 57(1), p. 59-69.

Le Ny, J. & Mohammady, M. (2018). Differentially private MIMO filtering for event streams. IEEE Transactions on Automatic Control, 63(1), p. 144-157.

Lebel, K., Duval, C., Nguyen, H. P., Plamondon, R. & Boissy, P. (2018). Cranio-caudal kinematic turn signature assessed with inertial systems as a marker of mobility deficits in Parkinson's disease. Frontiers in Neurology, 9.

Lebel, K., Nguyen, H., Duval, C., Plamondon, R. & Boissy, P. (2017). Capturing the Cranio-Caudal Signature of a Turn with Inertial Measurement Systems: Methods, Parameters Robustness and Reliability. Frontiers in Bioengineering and Biotechnology, 5.

Leblanc-Hotte, A., Chabot-Roy, G., Odagiu, L., Richaud, M., Lesage, S., Delisle, J.-S. & Peter, Y.-A. (2018). High-throughput refractive index-based microphotonic sensor for enhanced cellular discrimination. Sensors and Actuators B: Chemical, 266, p. 255-262.

Leblanc-Hotte, A., Delisle, J.-S., Lesage, S. & Peter, Y.-A. (2016). The importance of single-mode behavior in silicon-on-insulator rib waveguides with very large cross section for resonant sensing applications. IEEE Journal of Selected Topics in Quantum Electronics, 22(6), p. 241-248.

Lee, L. E., Ljungberg, E., Shin, D., Figley, C. R., Vavasour, I. M., Rauscher, A., ... Kolind, S. H. (2018). Inter-vendor reproducibility of myelin water imaging using a 3D gradient and spin echo sequence. Frontiers in Neuroscience, 12.

Lefebvre, J., Delafontaine-Martel, P. & Lesage, F. (2019). A review of intrinsic optical imaging serial blockface histology (ICI-SBH) for whole rodent brain imaging. Photonics, 6(2).

Lefebvre, J., Delafontaine-Martel, P., Pouliot, P., Girouard, H., Descoteaux, M. & Lesage, F. (2018). Fully automated dual-resolution serial optical coherence tomography aimed at diffusion MRI validation in whole mouse brains. Neurophotonics, 5(4).

Lefebvre, J., Chamberland, S. & Pierre, S. (2006). A network management framework using mobile agents. Journal of Computer Science, 2(8), p. 646-659.

Lefebvre, M. (2005). A filtered renewal process as a model for a river flow. Mathematical Problems in Engineering, 2005(1), p. 49-59.

Lefebvre, M. (2011). LQG homing in a finite time interval. Journal of Control Science and Engineering, 2011, p. 1-3.

Lefebvre, M. (2011). Maximizing the mean exit time of a brownian motion from an interval. International Journal of Stochastic Analysis, 2011, p. 1-5.

Lefebvre, M. (2002). Modeling and forecasting the peak flows of a river. Mathematical Problems in Engineering, 8(6), p. 553-562.

Lefebvre, M. (2016). Optimal and Suboptimal Control of a Standard Brownian Motion. Archives of Control Sciences, 26(3), p. 383-394.

Lefebvre, M. (2011). Similarity solutions of partial differential equations in probability. Journal of Probability and Statistics, 2011, p. 1-13.

Lefebvre, M. (2002). Survival maximization for a Laguerre population. Mathematical Problems in Engineering, 8(6), p. 563-574.

Lefebvre, M. & Bensalma, F. (2014). An application of filtered renewal processes in hydrology. International Journal of Engineering Mathematics, 2014.

Lefebvre, M. & Guilbault, J.-L. (2009). First hitting place probabilities for a discrete version of the Ornstein-Uhlenbeck Process. International Journal of Mathematics and Mathematical Sciences, 2009, p. 1-12.

Lefebvre, M. & Kounta, M. (2011). First hitting problems for Markov chains that converge to a geometric Brownian motion. ISRN Discrete Mathematics, 2011, p. 346503.

Lefebvre, M. & Zitouni, F. (2012). General LQG homing problems in one dimension. International Journal of Stochastic Analysis, 2012, p. 1-15.

Legrand, U., Klassen, D., Watson, S., Aufoujal, A., Nisol, B., Boudreault, R., ... Tavares, J. R. (2021). Nanoporous sponges as carbon-based sorbents for atmospheric water generation. Industrial & Engineering Chemistry Research, 60(35), p. 12923-12933.

Lemay, A., Gros, C., Zhuo, Z., Zhang, J., Duan, Y., Cohen-Adad, J. & Liu, Y. (2021). Automatic multiclass intramedullary spinal cord tumor segmentation on MRI with deep learning. NeuroImage - Clinical, 31.

Lemieux, J.-M., Hassaoui, J., Molson, J., Therrien, R., Therrien, P., Chouteau, M. & Ouellet, M. (2015). Simulating the impact of climate change on the groundwater resources of the Magdalen Islands, Québec, Canada. Journal of Hydrology: Regional Studies, 3, p. 400-423.

Lemieux-Leduc, C., Guertin, R., Bianki, M.-A. & Peter, Y.-A. (2021). All-polymer whispering gallery mode resonators for gas sensing. Optics Express, 29(6), p. 8685-8697.

Lemire, S., Vo, H. D. & Benner, M. W. (2009). Performance improvement of axial compressors and fans with plasma actuation. International Journal of Rotating Machinery, 2009, p. 1-13.

Levallois, P., St-Laurent, J., Gauvin, D., Courteau, M., Prévost, M., Campagna, C., ... Rasmussen, P. E. (2014). The impact of drinking water, indoor dust and paint on blood lead levels of children aged 1-5 years in Montreal (Quebec, Canada). Journal of Exposure Science & Environmental Epidemiology, 24(2), p. 185-191.

Levasseur, M., Généreux, M., Bruneau, J.-F., Vanasse, A., Chabot, É., Beaulac, C. & Bédard, M.-M. (2015). Importance of proximity to resources, social support, transportation and neighborhood security for mobility and social participation in older adults: results from a scoping study. BMC Public Health, 15.

Lévesque, S., Demers, E., Brisson, J. & Comeau, Y. (2017). Treatment of a mixed wood preservative leachate by a hybrid constructed wetland and a willow planted filter. Water Science and Technology, 76(1), p. 164-171.

Lévy, S., Guertin, M.-C., Khatibi, A., Mezer, A., Martinu, K., Chen, J. I., ... Cohen-Adad, J. (2018). Test-retest reliability of myelin imaging in the human spinal cord: Measurement errors versus region- and aging-induced variations. PLOS One, 13(1).

Lhachemi, H., Saussié, D. & Zhu, G. (2019). Boundary Control of a Nonhomogeneous Flexible Wing with Bounded Input Disturbances. IEEE Transactions on Automatic Control, 64(2), p. 854-861.

Lhachemi, H., Saussié, D. & Zhu, G. (2017). An Extension of Lyapunov’s First Method to Nonlinear Systems With Non-Continuously Differentiable Vector Fields. IEEE Control Systems Letters, 1(1), p. 74-79.

Li, B., Esipova, T. V., Sencan, I., Kilic, K., Fu, B., Desjardins, M., ... Sakadzic, S. (2019). More homogeneous capillary flow and oxygenation in deeper cortical layers correlate with increased oxygen extraction. eLife, 8.

Li, B., Lu, X., Moeini, M., Sakadzic, S., Thorin, E. & Lesage, F. (2019). Atherosclerosis is associated with a decrease in cerebral microvascular blood flow and tissue oxygenation. PLOS One, 14(8).

Li, L. & Aubertin, M. (2014). An improved method to assess the required strength of cemented backfill in underground stopes with an open face. International Journal of Mining Science and Technology, 24(4), p. 549-558.

Li, M., Zhu, G., Savaria, Y. & Lauer, M. (2017). Reliability Enhancement of Redundancy Management in AFDX Networks. IEEE Transactions on Industrial Informatics, 13(5), p. 2118-2129.

Li, X., van Sluijs, R. & Kennedy, G. G. (2021). Measurement of k0 values for europium, lutetium and iridium at FRM II with a very well thermalized neutron spectrum. Journal of Radioanalytical and Nuclear Chemistry, 327(1), p. 533-542.

Li, X., Genest, C. & Jalbert, J. (2021). A self‐exciting marked point process model for drought analysis. Environmetrics, 32(8), p. 1-24.

Lin, C.-K., Lin, R.-T., Chen, P.-C., Wang, P., de Marcellis-Warin, N., Zigler, C. & Christiani, D. C. (2018). A global perspective on sulfur oxide controls in coal-fired power plants and cardiovascular disease. Scientific Reports, 8(1).

Liu, G., Li, L., Yao, M., Landry, D., Malek, F., Yang, X. & Guo, L. (2017). An investigation of the Uniaxial Compressive Strength of a cemented hydraulic backfill made of alluvial sand. Minerals, 7(1), p. 1-13.

Lodi, A., Mossina, L. & Rachelson, E. (2020). Learning to handle parameter perturbations in Combinatorial Optimization : an application to facility location. EURO Journal on Transportation and Logistics, 9(4).

Loisel, P., Hong, Q. N., Imbeau, D., Lippel, K., Guzman, J., Maceachen, E., ... Anema, J. R. (2009). The work disability prevention CIHR strategic training program: Program performance after 5 years of implementation. Journal of Occupational Rehabilitation, 19(1).

Lonca, G., Lesage, P., Majeau-Bettez, G., Bernard, S. & Margni, M. (2020). Assessing scaling effects of circular economy strategies: A case study on plastic bottle closed-loop recycling in the USA PET market. Resources, Conservation and Recycling, 162, p. 105013.

Lopez Rios, N., Pouliot, P., Papoutsis, K., Foias, A., Stikov, N., Lesage, F., ... Cohen-Adad, J. (2018). Design and construction of an optimized transmit/receive hybrid birdcage resonator to improve full body images of medium-sized animals in 7T scanner. PLOS One, 13(2).

Loranger, S., Gagné, M., Lambin-Iezzi, V. & Kashyap, R. (2015). Rayleigh scatter based order of magnitude increase in distributed temperature and strain sensing by simple UV exposure of optical fibre. Scientific Reports, 5.

Lourdel, N., Therriault, D. & Lévesque, M. (2009). Identification of constitutive theory parameters using a tensile machine for deposited filaments of microcrystalline ink by the direct-write method. Journal of Micromechanics and Microengineering, 19(9).

Lowe, T., Avcu, E., Bousser, É., Sellers, W. & Withers, P. J. (2018). 3D Imaging of Indentation Damage in Bone. Materials, 11(12).

Lu, X., Qu, H. & Skorobogatiy, M. (2017). Piezoelectric microstructured fibers via drawing of multimaterial preforms. Scientific Reports, 7.

Lu, Y., Zhang, C., Lu, X., Moeini, M., Thorin, E. & Lesage, F. (2019). Impact of atherosclerotic disease on cerebral microvasculature and tissue oxygenation in awake LDLR-/-hApoB+/+ transgenic mice. Neurophotonics, 6(4).

M

Machado, R. R. P., Soares de Lima Filho, E., Dutra, R. C., Barbosa Raposo, N. R., Duarte, R. S., Soares, G. L. G., ... Kaplan, M. A. C. (2012). Metabolic Activity Interferometer: A Powerful Tool for Testing Antibiotics. Journal of Sensors, 2012, p. 1-7.

Mahdi, T.-F., Jain, G., Patel, S. & Sidhu, A. K. (2019). A review of cyclone track shifts over the Great Lakes of North America: implications for storm surges. Natural Hazards, 98(1), p. 119-135.

Mahmud, A., Mayer, R. & Baron, L. (2015). Modeling of Laterally Sliding Motion of a Magnetic Clamp. Advances in Acoustics and Vibration, 2015.

Majdouline, Y., Aubin, C.-É., Wang, X., Sangole, A. & Labelle, H. (2012). Preoperative assessment and evaluation of instrumentation strategies for the treatment of adolescent idiopathic scoliosis: computer simulation and optimization. Scoliosis and Spinal Disorders, 7(1).

Majeau-Bettez, G., Dandres, T., Pauliuk, S., Wood, R., Hertwich, E., Samson, R. & Strømman, A. H. (2018). Choice of allocations and constructs for attributional or consequential life cycle assessment and input-output analysis. Journal of Industrial Ecology, 22(4), p. 656-670.

Majeau-Bettez, G., Pauliuk, S., Wood, R., Bouman, E. A. & Strømman, A. H. (2016). Balance issues in input–output analysis: A comment on physical inhomogeneity, aggregation bias, and coproduction. Ecological Economics, 126, p. 188-197.

Majeau-Bettez, G., Wood, R. & Strømman, A. H. (2016). On the financial balance of input–output constructs: revisiting an axiomatic evaluation. Economic Systems Research, 28(3), p. 333-343.

Makhdom, A. M., Cartaleanu, A. S., Rendon, J. S., Villemure, I. & Hamdy, R. C. (2015). The accordion maneuver: A noninvasive strategy for absent or delayed callus formation in cases of limb lengthening. Advances in Orthopedics, 2015.

Malouin, B., Trépanier, J.-Y. & Gariépy, M. (2013). Interpolation of Transonic Flows Using a Proper Orthogonal Decomposition Method. International Journal of Aerospace Engineering, 2013, p. 1-11.

Mancini, M., Tian, Q., Fan, Q., Cercignani, M. & Huang, S. Y. (2021). Dissecting whole-brain conduction delays through MRI microstructural measures. Brain Structure and Function, 226(8), p. 2651-2663.

Mao, Y., Tremblay, R., Léger, P. & Li, J. (2017). New Simplified Method for Designing Seismically Isolated Highway Bridges with Massive Piers. Journal of Bridge Engineering, 22(8).

Marcotte, B. & Bernier, M. (2019). Experimental validation of a TRC model for a double U-tube borehole with two independent circuits. Applied Thermal Engineering, 162, p. 1-34.

Marinova, M., Beaudry, C., Taoussi, A., Trepanier, M. & Paris, J. (2008). Economic Assessment of Rural District Heating by Bio-Steam Supplied by a Paper Mill in Canada. Bulletin of Science, Technology & Society, 28(2), p. 159-173.

Marois, M., Bravo, J., Davis, S. C. & Kanick, S. C. (2016). Characterization and standardization of tissue-simulating protoporphyrin IX optical phantoms. Journal of Biomedical Optics, 21(3), p. 35003.

Marouani, H. & Dagenais, M. R. (2008). Internal clock drift estimation in computer clusters. Journal of Computer Systems, Networks, and Communications, 2008, p. 583162.

Marouene, A., Boukhili, R., Chen, J. & Yousefpour, A. (2016). Buckling behavior of variable-stiffness composite laminates manufactured by the tow-drop method. Composite Structures, 139, p. 243-253.

Martel, S. (2013). Combining Pulsed and DC Gradients in a Clinical MRI-Based Microrobotic Platform to Guide Therapeutic Magnetic Agents in the Vascular Network. International Journal of Advanced Robotic Systems, 10(1).

Martel, S. (2017). Targeting active cancer cells with smart bullets. Therapeutic Delivery, 8(5), p. 301-312.

Martel, S. & Mohammadi, M. (2016). Switching between magnetotactic and aerotactic displacement controls to enhance the efficacy of MC-1 magneto-aerotactic bacteria as cancer-fighting nanorobots. Micromachines, 7(6), p. 1-12.

Martin, A. R., Aleksanderek, I., Cohen-Adad, J., Tarmohamed, Z., Tetreault, L., Smith, N., ... Fehlings, M. G. (2015). Translating state-of-the-art spinal cord MRI techniques to clinical use: A systematic review of clinical studies utilizing DTI, MT, MWF, MRS, and fMRI. NeuroImage - Clinical, 10.

Martin, A. R., De Leener, B., Cohen-Adad, J., Cadotte, D. W., Nouri, A., Wilson, J. R., ... Fehlings, M. G. (2018). Can microstructural MRI detect subclinical tissue injury in subjects with asymptomatic cervical spinal cord compression? A prospective cohort study. BMJ Open, 8(4).

Martin, A. R., De Leener, B., Cohen-Adad, J., Kalsi-Ryan, S., Cadotte, D. W., Wilson, J. R., ... Fehlings, M. G. (2018). Monitoring for myelopathic progression with multiparametric quantitative MRI. PLOS One, 13(4).

Martin, A. & Beaudry, C. (2015). Measuring Collaboration Mechanisms in the Canadian Space Sector. New Space, 3(3), p. 172-178.

Martin, A., Sullivan, P., Beaudry, C., Kuyumjian, R. & Comtois, J.-M. (2012). Space medicine innovation and telehealth concept implementation for medical care during exploration-class missions. Acta Astronautica, 81(1), p. 30-33.

Martin, C.-O., Pontbriand-Drolet, S., Daoust, V., Yamga, E., Amiri, M., Hubner, L. C. & Ska, B. (2018). Narrative discourse in young and older adults: behavioral and NIRS analyses. Frontiers in Aging Neuroscience, 10.

Martin, C.-O., Pontbriand-Drolet, S., Daoust, V., Yamga, E., Amiri, M., Hubner, L. C. & Ska, B. (2018). Narrative discourse in young and older adults: Behavioral and NIRS analyses. Frontiers in Aging Neuroscience, 10.

Masson, C., Ammara, I. & Paraschivoiu, I. (1997). An aerodynamic method for the analysis of isolated horizontal-axis wind turbines. International Journal of Rotating Machinery, 3(1), p. 21-32.

Masson, C., Leclerc, C. & Paraschivoiu, I. (1998). Appropriate dynamic-stall models for performance predictions of VAWTs with NLF blades. International Journal of Rotating Machinery, 4(2), p. 129-139.

Matte-Deschênes, G., Vidal, D., Bertrand, F. & Hayes, R. E. (2016). Numerical investigation of the impact of thermophoresis on the capture efficiency of diesel particulate filters. The Canadian Journal of Chemical Engineering, 94(2), p. 291-303.

Mehand, M. S., Srinivasan, B. & De Crescenzo, G. (2015). Optimizing Multiple Analyte Injections in Surface Plasmon Resonance Biosensors with Analytes having Different Refractive Index Increments. Scientific Reports, 5.

Mehdi, D. & Boukas, E.-K. (2003). Stability and stabilizability of dynamical systems with multiple time-varying delays: delay-dependent criteria. Mathematical Problems in Engineering, 2003(4), p. 137-152.

Mehdi Zadeh, F., Trépanier, J.-Y. & Petro, E. (2013). Development and Validation of a New Boundary Condition for Intake Analysis with Distortion. International Journal of Aerospace Engineering, 2013, p. 1-12.

Menaa, M. & Lakis, A. A. (2014). Supersonic flutter of a spherical shell partially filled with fluid. American Journal of Computational Mathematics, 4(3), p. 153-182.

Menard, C., Rezende, F. A., Miloudi, K., Wilson, A., Tetreault, N., Hardy, P., ... Sapieha, P. (2016). MicroRNA signatures in vitreous humour and plasma of patients with exudative AMD. Oncotarget, 7(15), p. 19171-19184.

Mengis, N., Partanen, A.-I., Jalbert, J. & Matthews, H. D. (2018). 1.5 °C carbon budget dependent on carbon cycle uncertainty and future non-CO₂ forcing. Scientific Reports, 8.

Merzouki, A., Alameh, M., DeJesus, D., Jean, M., Darras, V., Thibault, M., ... Buschmann, M. D. (2012). Low molecular weight chitosan nanoparticulate system at low N:P ratio for nontoxic polynucleotide delivery. International Journal of Nanomedicine, 7, p. 1399-1414.

Mhada, F. Z., Ouzineb, M., Pellerin, R. & El Hallaoui, I. (2016). Multilevel hybrid method for optimal buffer sizing and inspection stations positioning. SpringerPlus, 5(1), p. 1-21.

Michaud, M., Milan, P. & Vo, H. D. (2016). Low-Cost Rotating Experimentation in Compressor Aerodynamics Using Rapid Prototyping. International Journal of Rotating Machinery, 2016.

Mighri, N., Mao, J., Mighri, F., Ajji, A. & Rouabhia, M. (2015). Chitosan-Coated Collagen Membranes Promote Chondrocyte Adhesion, Growth, and Interleukin-6 Secretion. Materials, 8(11), p. 7673-7689.

Miled, M., Gagne, A. & Sawan, M. (2013). Hybrid modeling method for a DEP based particle manipulation. Sensors, 13(2).

Mingasson, T., Duval, T., Stikov, N. & Cohen-Adad, J. (2017). AxonPacking: an open-source software to simulate arrangements of axons in white matter. Frontiers in Neuroinformatics, 11, p. 1-12.

Mireles, L.-K., Sacher, E., Yahia, L., Laurent, S. & Stanicki, D. (2016). Washing effect on superparamagnetic iron oxide nanoparticles. Data in Brief, 7, p. 1296-1301.

Mirnezami, S. R. & Beaudry, C. (2016). The effect of holding a research chair on scientists’ productivity. Scientometrics, 107(2), p. 399-454.

Mirnezami, S. R., Beaudry, C. & Larivière, V. (2016). What determines researchers’ scientific impact? A case study of Quebec researchers. Science and Public Policy, 43(2), p. 262-274.

Mirzaei, M. & Sawan, M. (2014). Microelectronics-Based Biosensors Dedicated to the Detection of Neurotransmitters: A Review. Sensors, 14(10).

Moeini, M., Lu, X., Avti, P. K., Damseh, R., Bélanger, S., Picard, F., ... Lesage, F. (2018). Compromised microvascular oxygen delivery increases brain tissue vulnerability with age. Scientific Reports, 8.

Mohammadi, H., Gagnon, C., Vincent, T., Kassab, A., Fraser, S., Nigam, A., ... Bherer, L. (2021). Longitudinal Impact of Physical Activity on Brain Pulsatility Index and Cognition in Older Adults with Cardiovascular Risk Factors: A NIRS Study. Brain Sciences, 11(6).

Mohammadian, N., Turenne, S. & Brailovski, V. (2019). Electropolishing of laser powder bed-fused IN625 components in an ionic electrolyte. Journal of Manufacturing and Materials Processing, 3(4).

Mok, E. & Cheung, B. K. S. (2013). An improved neural network training algorithm for wi-fi fingerprinting positioning. ISPRS International Journal of Geo-Information, 2(3), p. 854-868.

Mongeon, P., Brodeur, C., Beaudry, C. & Larivière, V. (2016). Concentration of research funding leads to decreasing marginal returns. Research Evaluation, 25(4), p. 396-404.

Moniruzzaman, M., Páez, A. & Morency, C. (2014). Compliance potential mapping: a tool to assess potential contributions of walking towards physical activity guidelines. BMC Public Health, 14.

Moradin, N., Torre, S., Gauthier, S., Tam, M., Hawari, J., Vandercruyssen, K., ... Gros, P. (2016). Cysteamine broadly improves the anti-plasmodial activity of artemisinins against murine blood stage and cerebral malaria. Malaria Journal, 15, p. 1-12.

Moradinejad, S., Glover, C. M., Mailly, J., Seighalani, T. Z., Peldszus, S., Barbeau, B., ... Zamyadi, A. (2019). Using advanced spectroscopy and organic matter characterization to evaluate the impact of oxidation on cyanobacteria. Toxins, 11(5).

Morency, P., Strauss, J., Pépin, F., Tessier, F. & Grondines, J. (2018). Traveling by bus instead of car on urban major roads: Safety benefits for vehicle occupants, pedestrians, and cyclists. Journal of Urban Health, 95(2), p. 196-207.

Moussaddy, H., Therriault, D. & Lévesque, M. (2013). Assessment of existing and introduction of a new and robust efficient definition of the representative volume element. International Journal of Solids and Structures, 50(24), p. 3817-3828.

Mukherjee, A., Knoch, S., Chouinard, G., Tavares, J. R. & Dumont, M.-J. (2019). Use of bio-based polymers in agricultural exclusion nets: A perspective. Biosystems Engineering, 180, p. 121-145.

Müller, B., Muñoz, G., Gasse, M., Gleixner, A., Lodi, A. & Serrano, F. (2021). On generalized surrogate duality in mixed-integer nonlinear programming. Mathematical Programming, 2021, p. 1-30.

Muscat, J., Swamy, V. & Harrison, N. M. (2002). First-principles calculations of the phase stability of TiO2. Physical Review B, 65(22).

Mustafy, T., Benoit, A., Londono, I., Moldovan, F. & Villemure, I. (2018). Can repeated in vivo micro-CT irradiation during adolescence alter bone microstructure, histomorphometry and longitudinal growth in a rodent model? PLOS One, 13(11).

Mustafy, T., Londono, I., Moldovan, F. & Villemure, I. (2019). High impact exercise improves bone microstructure and strength in growing rats. Scientific Reports, 9(1), p. 13128.

Mwale, F., Petit, A., Tian Wang, H., Epure, L. M., Girard-Lauriault, P.-L., Ouellet, J. A., ... Antoniou, J. (2008). The potential of N-rich plasma-polymerized ethylene (PPE:N) films for regulating the phenotype of the nucleus pulposus. Open Orthopaedics Journal, 2, p. 137-144.

Mwale, F., Wang, H., Petit, A., Girard-Lauriault, P.-L., Hunter, C. J., Ouellet, J. A., ... Antoniou, J. (2007). The effect of novel nitrogen-rich plasma polymer coatings on the phenotypic profile of notochordal cells. BioMedical Engineering OnLine, 6, p. 33.

N

Nada, O., Marian, A., Tran-Khanh, N., Buschmann, M., Podtetenev, M., Vidal, F., ... Brunette, I. (2014). Effect of Corneal Hydration on the Quality of the Femtosecond Laser Anterior Lamellar Cut. PLOS One, 9(6).

Nadeau, A., Lungu, O., Bore, A., Plamondon, R., Duchesne, C., Robillard, M.-È., ... Doyon, J. (2018). A 12-week cycling training regimen improves upper limb functions in people with Parkinson's disease. Frontiers in Human Neuroscience, 12.

Nadeau, A., Lungu, O., Bore, A., Plamondon, R., Duchesne, C., Robillard, M.-È., ... Doyon, J. (2018). A 12-week cycling training regimen improves upper limb functions in people with Parkinson's disease. Frontiers in Human Neuroscience, 12.

Nadeau, A., Lungu, O., Duchesne, C., Robillard, M.-È., Bore, A., Bobeuf, F., ... Doyon, J. (2017). A 12-week cycling training regimen improves gait and executive functions concomitantly in people with Parkinson’s disease. Frontiers in Human Neuroscience, 10, p. 1-10.

Nadeau, D., Ezzati-Jivan, N. & Dagenais, M. R. (2019). Efficient large-scale heterogeneous debugging using dynamic tracing. Journal of Systems Architecture, 98, p. 346-360.

Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P. J. & Therriault, D. (2015). Quiescent and shear-induced crystallization of linear and branched polylactides. Rheologica Acta, 54(9-10), p. 831-845.

Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P. J., Therriault, D. & Park, C. B. (2014). Rheological and foaming behavior of linear and branched polylactides. Rheologica Acta, 53(10-11), p. 779-790.

Naldi, A. C., Fayad, P. B., Prévost, M. & Sauvé, S. (2016). Analysis of steroid hormones and their conjugated forms in water and urine by on-line solid-phase extraction coupled to liquid chromatography tandem mass spectrometry. Chemistry Central Journal, 10.

Nasica-Labouze, & Mousseau, N. (2012). Kinetics of amyloid aggregation: a study of the GNNQQNY prion sequence. PLOS Computational Biology, 8(11), e1002782.

Nasri Lari, H., Chaouki, J. & Tavares, J. R. (2020). Continuous aerosol photopolymerization to coat de-agglomerated nanoparticles. Chemical Engineering Journal, 390.

Nasri Lari, H., Chaouki, J. & Tavares, J. R. (2017). De-agglomeration of nanoparticles in a jet impactor-assisted fluidized bed. Powder Technology, 316, p. 455-461.

Nasri Lari, H., Farhanian, D., Boffito, D. C., Patience, G. S., De Crescenzo, G., Chaouki, J. & Tavares, J. R. (2017). Shedding light on iron pentacarbonyl photochemistry through a CVD case study. Catalysis Communications, 100, p. 19-23.

Nasri Lari, H., Rasouli, M., Chaouki, J. & Tavares, J. R. (2020). Solid hold‐up measurement in a jet‐impactor assisted fluidized bed using gamma‐ray densitometry. AIChE Journal, 66(11).

Ndiaye, W. N., Deschamps, M.-H., Comeau, Y., Chowdhury, K., Bunod, J.-D., Letourneau-Montminy, M.-P. & Vandenberg, G. (2020). In situ chelation of phosphorus using microencapsulated aluminum and iron sulfate to bind intestinal phosphorus in rainbow trout (Oncorhynchus mykiss). Animal Feed Science and Technology, 269.

Neale, A., Kummert, M. & Bernier, M. (2022). Development of a bottom-up white-box building stock energy model for single-family dwellings. Journal of Building Performance Simulation, 15(6), p. 735-756. Item availablity restricted.

Neale, A., Kummert, M. & Bernier, M. (2020). Development of a stochastic virtual smart meter data set for a residential building stock - methodology and sample data. Journal of Building Performance Simulation, 13(5), p. 583-605.

Neale, A., Kummert, M. & Bernier, M. (2022). Discriminant analysis classification of residential electricity smart meter data. Energy & Buildings, 258. Item availablity restricted.

Nemati, H. & Dagenais, M. R. (2020). virtFlow: guest independent execution flow analysis across virtualized environments. IEEE Transactions on Cloud Computing, 8(3), p. 943-956.

Nemova, G. & Kashyap, R. (2016). Silica bottle resonator sensor for refractive index and temperature measurements. Sensors, 16(1), p. 1-9.

Ngamboe Mvogo, M. S., Berthier, P., Ammari, N., Dyrda, K. & Fernandez, J. M. (2021). Risk assessment of cyber-attacks on telemetry-enabled cardiac implantable electronic devices (CIED). International Journal of Information Security, 20(4), p. 621-645.

Ngueta, G., Prévost, M., Deshommes, E., Abdous, B., Gauvin, D. & Levallois, P. (2014). Exposure of young children to household water lead in the Montreal area (Canada): the potential influence of winter-to-summer changes in water lead levels on children's blood lead concentration. Environment International, 73, p. 57-65.

Nguyen, B., Claveau-Mallet, D., Hernandez, L. M., Xu, E. G., Farner, J. M. & Tufenkji, N. (2019). Separation and analysis of microplastics and nanoplastics in complex environmental samples. Accounts of chemical research, 52(4), p. 858-866.

Nguyen, L. H. & Goulet, J.-A. (2018). Anomaly detection with the Switching Kalman Filter for structural health monitoring. Structural Control and Health Monitoring, 25(4), p. 1-18.

Nguyen, L. H. & Goulet, J.-A. (2018). Structural health monitoring with dependence on non-harmonic periodic hidden covariates. Engineering Structures, 166, p. 187-194.

Nguyen, V. A., Pierre, S. & Konaré, D. (2005). Towards a scalable file system on computer clusters using declustering. Journal of Computer Science, 1(3), p. 363-368.

Nimesh, S., Thibault, M., Lavertu, M. & Buschmann, M. D. (2010). Enhanced gene delivery mediated by low molecular weight chitosan/DNA complexes: effect of pH and serum. Molecular Biotechnology, 46(2), p. 182-96.

Nozadi, S. H. & Kadoury, S. (2018). Classification of Alzheimer's and MCI patients from semantically parcelled PET images: A comparison between AV45 and FDG-PET. International Journal of Biomedical Imaging, 2018.

O

O'Reilly, C., Plamondon, R. & Lebrun, L.-H. (2014). Linking brain stroke risk factors to human movement features for the development of preventive tools. Frontiers in Aging Neuroscience.

Oligny, L., Bérubé, P. R. & Barbeau, B. (2016). Impact of PAC Fines in Fouling of Polymeric and Ceramic Low-Pressure Membranes for Drinking Water Treatment. Membranes, 6(3).

Ouchebri, I. & Mahdi, T.-F. (2021). Automatic incorporation of circular riverbank failures in two-dimensional flood modeling. Canadian Journal of Civil Engineering, 48(8), p. 1004-1019.

Oulai, D., Chamberland, S. & Pierre, S. (2007). An improved resource reservation protocol. Journal of Computer Science, 3(8), p. 658-665.

P

Paez, A., Mercado, R. G., Farber, S., Morency, C. & Roorda, M. (2010). Accessibility to health care facilities in Montreal Island: an application of relative accessibility indicators from the perspective of senior and non-senior residents. International Journal of Health Geographics, 9.

Pagé, P., Li, L., Yang, P. & Simon, R. (2019). Numerical investigation of the stability of a base-exposed sill mat made of cemented backfill. International Journal of Rock Mechanics and Mining Sciences, 114, p. 195-207.

Panerati, J., Schwind, N., Zeltner, S., Inoue, K. & Beltrame, G. (2018). Assessing the resilience of stochastic dynamic systems under partial observability. PLOS One, 13(8).

Paraschivoiu, I., Trifu, O. & Saeed, F. (2009). H-Darrieus wind turbine with blade pitch control. International Journal of Rotating Machinery, 2009, p. 505343.

Paredes Valencia, A., Doyen, A., Benoit, S., Margni, M. & Pouliot, Y. (2018). Effect of ultrafiltration of milk prior to fermentation on mass balance and process efficiency in greek-style yogurt manufacture. Foods, 7(9).

Pasquier, R., D’Angelo, L., Goulet, J.-A., Acevedo, C., Nussbaumer, A. & Smith, I. F. C. (2016). Measurement, data interpretation, and uncertainty propagation for fatigue assessments of structures. Journal of Bridge Engineering, 21(5), 04015087-1-04015087-13.

Pasquier, R., Goulet, J.-A., Acevedo, C. & Smith, I. F. C. (2014). Improving fatigue evaluations of structures using in-service behavior measurement data. Journal of Bridge Engineering, 19(11), p. 1-10.

Pasquier, R., Goulet, J.-A. & Smith, I. F.C. (2017). Measurement system design for civil infrastructure using expected utility. Advanced Engineering Informatics, 32, p. 40-51.

Patenaude, M., Baudron, P., Labelle, L. & Masse-Dufresne, J. (2020). Evaluating Bank-Filtration Occurrence in the Province of Quebec (Canada) with a GIS Approach. Water, 12(3), p. 1-17.

Patience, G. S., Patience, C. A., Blais, B. & Bertrand, F. (2017). Citation analysis of scientific categories. Heliyon, 3(5).

Patience, G. S., Galli, F., Patience, P. A. & Boffito, D. C. (2019). Intellectual contributions meriting authorship: Survey results from the top cited authors across all science categories. PLOS One, 14(1).

Patience, G. S., Karirekinyana, G., Galli, F., Patience, N. A., Kubwabo, C., Collin, G., ... Boffito, D. C. (2018). Sustainable manufacture of insect repellents derived from Nepeta cataria. Scientific Reports, 8(1).

Patouillard, L., Lorne, D., Collet, P., Bulle, C. & Margni, M. (2020). Prioritizing regionalization to enhance interpretation in consequential life cycle assessment: application to alternative transportation scenarios using partial equilibrium economic modeling. International Journal of Life Cycle Assessment, 25(12), p. 2325-2341.

Patra, B., Lafontaine, J., Bavoux, M., Zerouali, K., Glory, A., Ahanj, M., ... Wong, P. (2019). On-chip combined radiotherapy and chemotherapy testing on soft-tissue sarcoma spheroids to study cell death using flow cytometry and clonogenic assay. Scientific Reports, 9(1).

Paula Pinheiro, M. A., Jugend, D., Demattê Filho, L. C. & Armellini, F. (2018). Framework proposal for ecodesign integration on product portfolio management. Journal of Cleaner Production, 185, p. 176-186.

Pavelka, M., Klika, V. & Grmela, M. (2018). Thermodynamic explanation of Landau damping by reduction to hydrodynamics. Entropy, 20(6).

Pedneault, J., Desjardins, V., Margni, M., Conciatori, D., Fafard, M. & Sorelli, L. (2021). Economic and environmental life cycle assessment of a short-span aluminium composite bridge deck in Canada. Journal of Cleaner Production, 310, p. 127405. Item availablity restricted.

Pedneault, J., Majeau-Bettez, G., Krey, V. & Margni, M. (2021). What future for primary aluminium production in a decarbonizing economy? Global Environmental Change, 69. Item availablity restricted.

Pedneault, J., Majeau-Bettez, G., Pauliuk, S. & Margni, M. (2022). Sector‐specific scenarios for future stocks and flows of aluminum: An analysis based on shared socioeconomic pathways. Journal of Industrial Ecology. Item availablity restricted.

Pelletier, K. & Léger, P. (2017). Nonlinear seismic modeling of reinforced concrete cores including torsion. Engineering Structures, 136, p. 380-392.

Pelletier, S.-J., Pierre, S. & Hoang, H. H. (2003). Modeling a multi-agent system for retrieving information from distributed sources. Journal of Computing and Information Technology, 11(1), p. 15-39.

Perea-Vega, D., Girard, A. & Frigon, J.-F. (2013). Dual-based bounds for resource allocation in zero-forcing beamforming OFDMA-SDMA systems. EURASIP Journal on Wireless Communications and Networking, 2013.

Peres, S., Jolicoeur, M., Moulin, C., Dague, P. & Schuster, S. (2017). How important is thermodynamics for identifying elementary flux modes? PLOS One, 12(2), p. 1-20.

Pérez-Rocha, D., Morales-Cepeda, A. B., Navarro-Pardo, F., Lozano-Ramírez, T. & Lafleur, P. G. (2015). Carbon Fiber Composites of Pure Polypropylene and Maleated Polypropylene Blends Obtained from Injection and Compression Moulding. International Journal of Polymer Science, 2015, p. 1-8.

Périé-Curnier, D. & Curnier, D. (2010). Effect of pathology type and severity on the distribution of MRI signal intensities within the degenerated nucleus pulposus: application to idiopathic scoliosis and spondylolisthesis. BMC Musculoskeletal Disorders, 11.

Périé-Curnier, D., Dahdah, N., Foudis, A. & Curnier, D. (2013). Multi-parametric MRI as an indirect evaluation tool of the mechanical properties of in-vitro cardiac tissues. BMC Cardiovascular Disorders, 13.

Perone, C. S., Calabrese, E. & Cohen-Adad, J. (2018). Spinal cord gray matter segmentation using deep dilated convolutions. Scientific Reports, 8.

Petiot, E., Jacob, D., Lanthier, S., Lohr, V., Ansorge, S. & Kamen, A. A. (2011). Metabolic and Kinetic analyses of influenza production in perfusion HEK293 cell culture. BMC Biotechnology, 11, p. 84.

Petit, A., Demers, C. N., Girard-Lauriault, P.-L., Stachura, D., Wertheimer, M. R., Antoniou, J. & Mwale, F. (2011). Effect of nitrogen-rich cell culture surfaces on type X collagen expression by bovine growth plate chondrocytes. BioMedical Engineering OnLine, 10(4).

Pham, Q.-V. V., Lavallee, A.-P., Foias, A., Roberge, D., Mitrou, E. & Wong, P. (2018). Radiotherapy immobilization mask molding through the use of 3D-printed head models. Technology in Cancer Research & Treatment, 17.

Phan, T. V., Seoud, L., Chakor, H. & Cheriet, F. (2016). Automatic screening and grading of age-related macular degeneration from texture analysis of fundus images. Journal of Ophthalmology, 2016, p. 1-11.

Pickenhahn, V., Darras, V., Dziopa, F., Biniecki, K., De Crescenzo, G., Lavertu, M. & Buschmann, M. (2015). Regioselective thioacetylation of chitosan end-groups for nanoparticle gene delivery systems. Chemical Science, 6(8), p. 4650.

Pickenhahn, V., Grange, M., De Crescenzo, G., Lavertu, M. & Buschmann, M. (2017). Regioselective chitosan end-group activation: the triskelion approach. RSC Advances, 7(30), p. 18628-18638.

Picot, F., Daoust, F., Sheehy, G., Dallaire, F., Chaikho, L., Bégin, T., ... Leblond, F. (2020). Data consistency and classification model transferability across biomedical Raman spectroscopy systems. Translational Biophotonics, 3(1), p. 1-11.

Picot, F., Goyette, A., Obaid, S., Desroches, J., Lessard, S., Tremblay, M.-A., ... Leblond, F. (2019). Interstitial imaging with multiple diffusive reflectance spectroscopy projections for in vivo blood vessels detection during brain needle biopsy procedures. Neurophotonics, 6(2).

Pierre, W. C., Akakpo, L., Londono, I., Pouliot, P., Chemtob, S., Lesage, F. & Lodygensky, G. A. (2019). Assessing therapeutic response non-invasively in a neonatal rat model of acute inflammatory white matter injury using high-field MRI. Brain, Behavior, and Immunity, 81, p. 348-360.

Pinciroli, C. & Beltrame, G. (2016). Swarm-Oriented Programming of Distributed Robot Networks. Computer, 49(12), p. 32-41.

Pinçon, A., De Montgolfier, O., Akkoyunlu, N., Daneault, C., Pouliot, P., Villeneuve, L., ... Ruiz, M. (2019). Non-alcoholic fatty liver disease, and the underlying altered fatty acid metabolism, reveals brain hypoperfusion and contributes to the cognitive decline in APP/PS1 mice. Metabolites, 9(5).

Pinto, M., Zorn, K. C., Tremblay, J.-P., Desroches, J., Dallaire, F., Aubertin, K., ... Lesage, F. (2019). Integration of a Raman spectroscopy system to a robotic-assisted surgical system for real-time tissue characterization during radical prostatectomy procedures. Journal of Biomedical Optics, 24(2).

Plamondon, R. (2018). General relativity: an erfc metric. Results in Physics, 9, p. 456-462.

Plamondon, R., O'Reilly, C., Rémi, C. & Duval, T. (2013). The lognormal handwriter: learning, performing, and declining. Frontiers in Psychology, 4.

Plantard, P., Auvinet, E., Pierres, A.-S. & Multon, F. (2015). Pose Estimation with a Kinect for Ergonomic Studies: Evaluation of the Accuracy Using a Virtual Mannequin. Sensors, 15(1).

Poliquin, P. O., Chen, J., Cloutier, M., Trudeau, L.-É. & Jolicoeur, M. (2013). Metabolomics and in-silico analysis reveal critical energy deregulations in animal models of Parkinson’s disease. PLOS One, 8(7).

Pons, J.-F., Brault, J.-J. & Savaria, Y. (2013). Modeling, design and implementation of a low-power FPGA based asynchronous wake-up receiver for wireless applications. Analog Integrated Circuits and Signal Processing, 77(2), p. 169-182.

Pourahmad, H., Haddad, M., Claveau-Mallet, D. & Barbeau, B. (2019). Impact of media coating on simultaneous manganese removal and remineralization of soft water via calcite contactor. Water Research, 161, p. 601-609.

Pradip, R., Piekarz, P., Merkel, D. G., Kalt, J., Waller, O., Chumakov, A. I., ... Stankov, S. (2019). Phonon confinement and spin-phonon coupling in tensile-strained ultrathin EuO films. Nanoscale, 11(22), p. 10968-10976.

Prados, F., Ashburner, J., Blaiotta, C., Brosch, T., Carballido-Gamio, J., Cardoso, M. J., ... Cohen-Adad, J. (2017). Spinal cord grey matter segmentation challenge. NeuroImage, 152, p. 312-329.

Prieto, C. & Cimmino, M. (2021). Thermal interactions in large irregular fields of geothermal boreholes: the method of equivalent boreholes. Journal of Building Performance Simulation, 14(4), p. 446-460.

Prieto, C. & Cimmino, M. (2021). Transient Multipole Expansion for Heat Transfer in Ground Heat Exchangers. Science and Technology for the Built Environment, 27(3), p. 253-270.

Prieur-Drevon, L., Beamonte, R. & Dagenais, M. R. (2018). R-SHT: A state history tree with R-Tree properties for analysis and visualization of highly parallel system traces. Journal of Systems and Software, 135, p. 55-68.

Provost, J., Papadacci, C., Arango, J. E., Imbault, M., Fink, M., Gennisson, J. L., ... Pernot, M. (2014). 3D ultrafast ultrasound imaging in vivo. Physics in Medicine & Biology, 59(19), L1-L13.

Puigagut, J., Chazarenc, F. & Comeau, Y. (2014). Influence of tubificid worms on nutrient fluxes across water-sediment interface in fish farm settling ponds. Knowledge and Management of Aquatic Ecosystems (413), p. 1-12.

Q

Quach, A. N.-O., Tabor, L., Dumont, D., Courcelles, B. & Goulet, J.-A. (2017). A machine learning approach for characterizing soil contamination in the presence of physical site discontinuities and aggregated samples. Advanced Engineering Informatics, 33, p. 60-67.

Querin, G., El Mendili, M. M., Lenglet, T., Behin, A., Stojkovic, T., Salachas, F., ... Pradat, P. F. (2019). The spinal and cerebral profile of adult spinal-muscular atrophy: A multimodal imaging study. NeuroImage: Clinical, 21, p. 101618.

Quintero, A. & Del Frutos, E. (2009). MPLS based architecture for mobility and end-to-end QoS support in fourth generation mobile networks. Journal of Computer Science, 5(4), p. 255-262.

R

Rafiee, M., Granier, F. & Therriault, D. (2021). Advances in coaxial additive manufacturing and applications. Advanced Materials Technologies, 6(11).

Rahman, M. M. & Mayer, R. (2016). Measurement Accuracy Investigation of Touch Trigger Probe with Five-Axis Machine Tools. Archive of Mechanical Engineering, 63(4), p. 495-510.

Rahman, M.U., NaghshvarianJahromi, M., Mirjavadi, S. S. & Hamouda, A. M. (2018). Bandwidth enhancement and frequency scanning array antenna using novel UWB filter integration technique for OFDM UWB radar applications in wireless vital signs monitoring. Sensors, 18(9).

Rahman, M.U., NaghshvarianJahromi, M., Mirjavadi, S. S. & Hamouda, A. M. (2018). Resonator based switching technique between ultra wide band (UWB) and single/dual continuously tunable-notch behaviors in UWB radar for wireless vital signs monitoring. Sensors, 18(10).

Rajagopalan, S., Sawan, M., Ghafar-Zadeh, E., Savadogo, O. & Chodavarapu, V. (2008). A Polypyrrole-based Strain Sensor Dedicated to Measure Bladder Volume in Patients with Urinary Dysfunction. Sensors, 8(8).

Raouafi, S., Achiche, S. & Raison, M. (2018). Socioeconomic disparities and difficulties to access to healthcare services among Canadian children with neurodevelopmental disorders and disabilities. Epidemiology Health, 40.

Raphael, W., Martel, T., Landry, V. & Tavares, J. R. (2018). Surface engineering of wood substrates to impart barrier properties: a photochemical approach. Wood Science and Technology, 52(1), p. 193-207.

Recuerda, M., Périé-Curnier, D., Gilbert, G. & Beaudoin, G. (2012). Assessment of mechanical properties of isolated bovine intervertebral discs from multi-parametric magnetic resonance imaging. BMC Musculoskeletal Disorders, 13.

Ren, X., Zhao, X., Turcotte, F., Deschênes, J.-S., Tremblay, R. & Jolicoeur, M. (2017). Current lipid extraction methods are significantly enhanced adding a water treatment step in Chlorella protothecoides. Microbial Cell Factories, 16, p. 1-13.

Reumont-Locke, F., Ezzati-Jivan, N. & Dagenais, M. R. (2019). Efficient methods for trace analysis parallelization. International Journal of Parallel Programming, 47(5-6), p. 951-972.

Reyjal, M., Tavares, J. R., Virgilio, N. & Fradette, L. (2013). Is the Maxwell–Garnett continuum model valid to predict the thermal conductivity of particle-stabilized (Pickering) emulsions? Industrial & Engineering Chemistry Research, 52(13), p. 4962-4966.

Rhazi, A. E., Pierre, S. & Boucheneb, H. (2007). A secure protocol based on a sedentary agent for mobile agent environments. Journal of Computer Science, 3(1), p. 35-42.

Roa Gonzalez, I. R., Lima, B. C., Pincheira, P. I.R., Brum, A. A., Macêdo, A. M.S., Vasconcelos, G. L., ... Kashyap, R. (2017). Turbulence hierarchy in a random fibre laser. Nature Communications, 8, p. 1-8.

Robitaille, J., Chen, J. & Jolicoeur, M. (2015). A Single Dynamic Metabolic Model Can Describe mAb Producing CHO Cell Batch and Fed-Batch Cultures on Different Culture Media. PLOS One, 10(9).

Rodríguez Varela, F. J., Luna, S. & Savadogo, O. (2009). Synthesis and Evaluation of Highly Tolerant Pd Electrocatalysts as Cathodes in Direct Ethylene Glycol Fuel Cells (DEGFC). Energies, 2(4), p. 944-956.

Rohrbach, A., Torabi, A., Rohrbach, M., Tandon, N., Pal, C., Larochelle, H., ... Schiele, B. (2017). Movie description. International Journal of Computer Vision, 123(1), p. 94-120.

Rokbani, H., Daigle, F. & Ajji, A. (2018). Combined effect of ultrasound stimulations and autoclaving on the enhancement of antibacterial activity of ZnO and SiO₂/ZnO nanoparticles. Nanomaterials, 8(3).

Rosenbaum, R. K., Meijer, A., Demou, E., Hellweg, S., Jolliet, O., Lam, N. L., ... McKone, T. E. (2015). Indoor Air Pollutant Exposure for Life Cycle Assessment: Regional Health Impact Factors for Households. Environmental Science & Technology, 49(21), p. 12823-12831.

Rostamzadeh, R., Sabaghi, M. & Esmaili, A. (2013). Evaluation of cost-effectiveness criteria in supply chain management : case study. Advances in Decision Sciences, 2013.

Rotaba, Z. & Beaudry, C. (2012). How do high, medium, and low tech firms innovate? A system of innovation (SI) approach. International Journal of Innovation and Technology Management, 09(05).

Rotaba, Z. & Beaudry, C. (2009). The renewal and transformation of high, medium and low tech: a comparative approach. International Journal of Technology Marketing, 4(4), p. 292.

Rousset, N., Monet, F. & Gervais, T. (2017). Simulation-assisted design of microfluidic sample traps for optimal trapping and culture of non-adherent single cells, tissues, and spheroids. Scientific Reports, 7.

Roy-Lachapelle, A., Solliec, M., Sauvé, S. & Gagnon, C. (2019). A data-independent methodology for the structural characterization of microcystins and anabaenopeptins leading to the identification of four new congeners. Toxins, 11(11).

S

Sabri, F., Berthomier, K., Marion, A., Fradette, L., Tavares, J. R. & Virgilio, N. (2018). Sodium alginate-grafted submicrometer particles display enhanced reversible aggregation/disaggregation properties. Carbohydrate Polymers, 194, p. 61-68.

Sabri, F., Berthomier, K., Wang, C.-S., Fradette, L., Tavares, J. R. & Virgilio, N. (2019). Tuning particle–particle interactions to control Pickering emulsions constituents separation. Green Chemistry, 21(5), p. 1065-1074.

Sadekova, N., Vallerand, D., Guevara, E., Lesage, F. & Girouard, H. (2013). Carotid calcification in mice: a new model to study the effects of arterial stiffness on the brain. Journal of the American Heart Association, 2(3), e000224.

Sadid, W. H., Abobakr, S. A. & Zhu, G. (2017). Discrete-Event Systems-Based Power Admission Control of Thermal Appliances in Smart Buildings. IEEE Transactions on Smart Grid, 8(6), p. 2665-2674.

Safa, H. & Pierre, S. (2005). A new architecture for improving location management in PCS networks. Journal of Computer Science, 1(2), p. 249-258.

Safavieh, M., Qasaimeh, M. A., Vakil, A., Juncker, D. & Gervais, T. (2015). Two-Aperture Microfluidic Probes as Flow Dipoles: Theory and Applications. Scientific Reports, 5.

Safi, D., Béland, R., Nguyen, D. K., Pouliot, P., Mohamed, I. S., Vannasing, P., ... Gallagher, A. (2016). Recruitment of the left precentral gyrus in reading epilepsy: A multimodal neuroimaging study. Epilepsy & Behavior Case Reports, 5, p. 19-22.

Salam, M., Sawan, M. & Nguyen, D. (2010). Low-Power Implantable Device for Onset Detection and Subsequent Treatment of Epileptic Seizures: A Review. Journal of Healthcare Engineering, 1(2), p. 169-184.

Salam, M. T., Gelinas, S., Desgent, S., Duss, S., Bernier Turmel, F., Carmant, L., ... Nguyen, D. K. (2014). Subdural porous and notched mini-grid electrodes for wireless intracranial electroencephalographic recordings. Journal of Multidisciplinary Healthcare, 7, p. 573-586.

Salem, O., Wang, H., Alaseem, A. M., Ciobanu, O., Hadjab, I., Gawri, R., ... Mwale, F. (2014). Naproxen affects osteogenesis of human mesenchymal stem cells via regulation of Indian hedgehog signaling molecules. Arthritis Research and Therapy, 16.

Salhab, R., Malhame, R. P. & Le Ny, J. (2018). A dynamic game model of collective choice in multi-agent systems. IEEE Transactions on Automatic Control, 63(3), p. 768-782.

Saliani, A., Perraud, B., Duval, T., Stikov, N., Rossignol, S. & Cohen-Adad, J. (2017). Axon and myelin morphology in animal and human spinal cord. Frontiers in Neuroanatomy, 11.

Samson, R. S., Lévy, S., Schneider, T., Smith, A. K., Smith, S. A., Cohen-Adad, J. & Wheeler-Kingshott, C. A. M. G. (2016). ZOOM or non-ZOOM? Assessing spinal cord diffusion tensor imaging protocols for multi-centre studies. PLOS One, 11(5), p. 1-14.

Santa-Eulalia, L. A., Halladjian, G., D'Amours, S. & Frayret, J.-M. (2011). Integrated methodological frameworks for modelling agent-based advanced supply chain planning systems: A systematic literature review. Journal of Industrial Engineering and Management, 4(4), p. 624-668.

Sato, F.-K., Pierre, S. & Glitho, R. H. (2005). Retrieving information from the invisible web using mobile agents. Journal of Computer Science, 1(2), p. 283-289.

Schiffauerova, A. & Beaudry, C. (2009). Canadian nanotechnology innovation networks: intra-cluster, inter-cluster and foreign collaboration. Journal of Innovation Economics, 4(2), p. 119.

Schiffauerova, A. & Beaudry, C. (2012). Collaboration spaces in Canadian biotechnology: A search for gatekeepers. Journal of Engineering and Technology Management, 29(2), p. 281-306.

Schiffauerova, A. & Beaudry, C. (2011). Star scientists and their positions in the Canadian biotechnology network. Economics of Innovation and New Technology, 20(4), p. 343-366.

Schiffauerova, A. & Beaudry, C. (2012). Who owns the intellectual property and where? The case of Canadian biotechnology. International Journal of Biotechnology, 12(3), p. 147.

Sedlbauer, K., Braune, A., Humbert, S., Margni, M., Schuller, O. & Fischer, M. (2007). Spatial differentiation in LCA :Moving Forward to More Operational Sustainability. Lebenszyklusanalysen in der Nachhaltigkeitsbewertung, 16(3), p. 24-31.

Seif, M., Gandini Wheeler-Kingshott, C. A. M., Cohen-Adad, J., Flanders, A. E. & Freund, P. (2019). Guidelines for the conduct of clinical trials in spinal cord injury: Neuroimaging biomarkers. Spinal Cord, 57(9), p. 717-728.

Seifitokaldani, A., Gheribi, A. E., Phan, A. T., Chartrand, P. & Dollé, M. (2016). Important variation in vibrational properties of LiFePO4 and FePO4 induced by magnetism. Scientific Reports, 6, p. 1-10.

Senese, F., Tubertini, P., Mazzocchetti, A., Lodi, A., Ruozi, C. & Grilli, R. (2015). Forecasting future needs and optimal allocation of medical residency positions: the Emilia-Romagna Region case study. Human Resources for Health volume, 13, p. 7.

Serrano-Munoz, I., Fritsch, T., Mishurova, T., Trofimov, A., Apel, D., Ulbricht, A., ... Bruno, G. (2021). On the interplay of microstructure and residual stress in LPBF IN718. Journal of Materials Science, 56(9), p. 5845-5867.

Sevrain, A., Aubin, C.-É., Gharbi, H., Wang, X. & Labelle, H. (2012). Biomechanical evaluation of predictive parameters of progression in adolescent isthmic spondylolisthesis: a computer modeling and simulation study. Scoliosis and Spinal Disorders, 7.

Shahrampour, S., De Leener, B., Alizadeh, M., Middleton, D., Krisa, L., Flanders, A.E., ... Mohamed, F.B. (2021). Atlas-based quantification of DTI measures in a typically developing pediatric spinal cord. American Journal of Neuroradiology, 42(9), p. 1727-1734.

Shameli-Sendi, A., Desfossez, J., Dagenais, M. R. & Jabbarifar, M. (2013). A retroactive-burst framework for automated intrusion response system. Journal of Computer Networks and Communications, 2013, p. 1-8.

Shameli-Sendi, A., Jabbarifar, M., Dagenais, M. R. & Shajari, M. (2012). System health monitoring using a novel method : security unified process. Journal of Computer Networks and Communications, 2012, p. 1-20.

Sharma, S. D. & Dagenais, M. R. (2016). Hardware-assisted instruction profiling and latency detection. The Journal of Engineering, 2016(10), p. 367-376.

Shi, L., Wang, D., Driscoll, M., Villemure, I., Chu, W. C., Cheng, J. C. & Aubin, C.-É. (2011). Biomechanical analysis and modeling of different vertebral growth patterns in adolescent idiopathic scoliosis and healthy subjects. Scoliosis, 6, p. 11.

Shirazi, A. H., Namaki, A., Roohi, A. A. & Jafari, G. R. (2013). Transparency effect in the emergence of monopolies in social networks. Journal of Artificial Societies and Social Simulation, 16(1), p. 1-8.

Simard, P., Galarneau, H., Marois, S., Rusu, D., Hoemann, C. D., Poubelle, P. E., ... Fernandes, M. J.G. (2009). Neutrophils exhibit distinct phenotypes toward chitosans with different degrees of deacetylation: implications for cartilage repair. Arthritis Research and Therapy, 11(3).

Sioui, L., Morency, C. & Verreault, H. (2018). An Octopus and a circle at the basis of a framework for the evaluation of sustainable mobility. Transport, 33(1), p. 242-248.

Sirpal, P., Damseh, R., Peng, K., Nguyen, D. K. & Lesage, F. (2021). Multimodal autoencoder predicts fNIRS resting state from EEG signals. Neuroinformatics, 2021.

Sirpal, P., Kassab, A., Pouliot, P., Nguyen, D. K. & Lesage, F. (2019). fNIRS improves seizure detection in multimodal EEG-fNIRS recordings. Journal of Biomedical Optics, 24(5).

Skorobogatiy, M. (2009). Microstructured and photonic bandgap fibers for applications in the resonant bio- and chemical sensors. Journal of Sensors, 2009, p. 1-20.

Smith, A. L., Verleg, M. N., Vlieland, J., de Haas, D., Ocadiz-Flores, J. A., Martin, P., ... Konings, R. J. M. (2019). In situ high-temperature EXAFS measurements on radioactive and air-sensitive molten salt materials. Journal of Synchrotron Radiation, 26(Pt .1), p. 124-136.

Somé, A., Dandres, T., Gaudreault, C., Majeau-Bettez, G., Wood, R. & Samson, R. (2018). Coupling input-output tables with macro-life cycle assessment to assess worldwide impacts of biofuels transport policies. Journal of Industrial Ecology, 22(4), p. 643-655.

Sosa-Rey, F., Abderrafai, Y., Diouf Lewis, A., Therriault, D., Piccirelli, N. & Lévesque, M. (2022). OpenFiberSeg: Open-source segmentation of individual fibers and porosity in tomographic scans of additively manufactured short fiber reinforced composites. Composites Science and Technology, 226. Item availablity restricted.

Spérandio, M., Comeau, Y. & Rieger, L. (2019). Editorial: Water Resource Recovery Modelling. Water Science and Technology, 79(1).

Srinivasan Ramanagopal, M., Nguyen, A. P.-V. & Le Ny, J. (2018). A motion planning strategy for the active vision-based mapping of ground-level structures. IEEE Transactions on Automation Science and Engineering, 15(1), p. 356-368.

St-Cyr Bouchard, M. & Saint-Charles, J. (2018). La communication et le succès des équipes interdisciplinaires. Communiquer (23), p. 21-38.

Steinkuhler, J., De Tillieux, P., Knorr, R. L., Lipowsky, R. & Dimova, R. (2018). Charged giant unilamellar vesicles prepared by electroformation exhibit nanotubes and transbilayer lipid asymmetry. Scientific Reports, 8.

Stikov, N., Campbell, J. S. W., Stroh, T., Lavelee, M., Frey, S., Novek, J., ... Pike, G. B. (2015). Quantitative analysis of the myelin g-ratio from electron microscopy images of the macaque corpus callosum. Data Brief, 4, p. 368-373.

Stip, E., Lungu, O. V., Anselmo, K., Letourneau, G., Mendrek, A., Stip, B., ... Bentaleb, L. A. (2012). Neural changes associated with appetite information processing in schizophrenic patients after 16 weeks of olanzapine treatment. Translational Psychiatry, 2(6).

Stipancic, J., Miranda-Moreno, L., Labbe, A. & Saunier, N. (2019). Measuring and visualizing space–time congestion patterns in an urban road network using large-scale smartphone-collected GPS data. Transportation Letters, 11(7), p. 391-401.

Stone, A., Jain, H., Dierolf, V., Sakakura, M., Shimotsuma, Y., Miura, K., ... Kashyap, R. (2015). Direct laser-writing of ferroelectric single-crystal waveguide architectures in glass for 3D integrated optics. Scientific Reports, 5.

Stroman, P.W., Wheeler-Kingshott, C. A. M. G., Bacon, M., Schwab, J.M., Bosma, R., Brooks, J., ... Tracey, I. (2014). The current state-of-the-art of spinal cord imaging: Methods. NeuroImage, 84, p. 1070.

Strupler, M., Beckley, A. M., Benboujja, F., Dubois, S., Noiseux, I., Mermut, O., ... Boudoux, C. (2015). Toward an automated method for optical coherence tomography characterization. Journal of Biomedical Optics, 20(12).

Stucchi, M., Boffito, D. C., Pargoletti, E., Cerrato, G., Bianchi, C. L. & Cappelletti, G. (2018). Nano-MnO₂ decoration of TiO₂ microparticles to promote gaseous ethanol visible photoremoval. Nanomaterials, 8(9).

T

Tabor, L., Goulet, J.-A., Charron, J.-P. & Desmettre, C. (2018). Probabilistic modeling of heteroscedastic laboratory experiments using Gaussian process regression. Journal of Engineering Mechanics, 144(6), p. 1-10.

Tahmooresnejad, L. & Beaudry, C. (2018). Do patents of academic funded researchers enjoy a longer life? A study of patent renewal decisions. PLOS One, 13(8).

Tahmooresnejad, L. & Beaudry, C. (2015). Does government funding have the same impact on academic publications and patents? The case of nanotechnology in Canada. International Journal of Innovation Management, 19(03).

Tahmooresnejad, L., Beaudry, C. & Schiffauerova, A. (2015). The role of public funding in nanotechnology scientific production: Where Canada stands in comparison to the United States. Scientometrics, 102(1), p. 753-787.

Talchabhadel, R., Nakagawa, H., Kawaike, K., Yamanoi, K., Musumari, H., Adhikari, T. R. & Prajapati, R. (2021). Appraising the Potential of Using Satellite‐Based Rainfall Estimates for Evaluating Extreme Precipitation: A Case Study of August 2014 Event Across the West Rapti River Basin, Nepal. Earth and Space Science, 8(8).

Tan, S., Soulez, G., Diez Martinez, P., Larrivée, S., Stevens, L.-M., Goussard, Y., ... Chartrand-Lefebvre, C. (2016). Coronary stent artifact reduction with an edge-enhancing reconstruction kernel : a prospective cross-sectional study with 256-slice CT. PLOS One, 11(4), e0154292-e0154305.

Tao, R., Shi, J., Rafiee, M., Akbarzadeh, A. & Therriault, D. (2022). Fused filament fabrication of PVDF films for piezoelectric sensing and energy harvesting applications. Materials Advances, 3(12), p. 4851-4860.

Tardif, P.-L., Bertrand, M.-J., Abran, M., Castonguay, A., Lefebvre, J., Stähli, B. E., ... Lesage, F. (2016). Validating intravascular imaging with serial optical coherence tomography and confocal fluorescence microscopy. International Journal of Molecular Sciences, 17(12), p. 1-12.

Tardif-Drolet, M., Li, L., Pabst, T., Zagury, G. J., Mermillod-Blondin, R. & Genty, T. (2020). Revue de la réglementation sur la valorisation des résidus miniers hors site au Québec. Dossiers environnement/Environmental Reviews, 28(1), p. 32-44.

Tarun, A., Hayazawa, N., Balois, M. V., Kawata, S., Reiche, M. & Moutanabbir, O. (2013). Stress redistribution in individual ultrathin strained silicon nanowires: a high-resolution polarized Raman study. New Journal of Physics, 15(5).

Tavares, J. R., Shahryari, A., Harvey, J., Coulombe, S. & Omanovic, S. (2009). Corrosion behavior and fibrinogen adsorptive interaction of SS316L surfaces covered with ethylene glycol plasma polymer-coated Ti nanoparticles. Surface and Coatings Technology, 203(16), p. 2278-2287.

Teixeira, T., Hafyane, T., Stikov, N., Akdeniz, C., Greiser, A. & Friedrich, M. G. (2016). Comparison of different cardiovascular magnetic resonance sequences for native myocardial T1 mapping at 3T. Journal of Cardiovascular Magnetic Resonance, 18, p. 1-12.

Thalla, P. K., Contreras-García, A., Fadlallah, H., Barrette, J., De Crescenzo, G., Merhi, Y. & Lerouge, S. (2013). A Versatile Star PEG Grafting Method for the Generation of Nonfouling and Nonthrombogenic Surfaces. BioMed Research International, 2013.

Thibault, M., Nimesh, S., Lavertu, M. & Buschmann, M. (2010). Intracellular Trafficking and Decondensation Kinetics of Chitosan–pDNA Polyplexes. Molecular Therapy, 18(10), p. 1787-1795.

Thompson, C. M., Petiot, E., Lennaertz, A., Henry, O. & Kamen, A. A. (2013). Analytical technologies for influenza virus-like particle candidate vaccines: challenges and emerging approaches. Virology Journal, 10.

Thompson, C. M., Petiot, E., Mullick, A., Aucoin, M. G., Henry, O. & Kamen, A. A. (2015). Critical assessment of influenza VLP production in Sf9 and HEK293 expression systems. BMC Biotechnology, 15.

Tichauer, K. M., Holt, R. W., El-Ghussein, F., Davis, S. C., Samkoe, K. S., Gunn, J. R., ... Pogue, B. W. (2013). Dual-tracer background subtraction approach for fluorescent molecular tomography. Journal of Biomedical Optics, 18(1).

Tichauer, K. M., Holt, R. W., Samkoe, K. S., El-Ghussein, F., Gunn, J. R., Jermyn, M., ... Pogue, B. W. (2012). Computed tomography-guided time-domain diffuse fluorescence tomography in small animals for localization of cancer biomarkers. Journal of Visualized Experiments (65), e4050.

Tilsted, J. P., Bjørn, A., Majeau-Bettez, G. & Lund, J. F. (2021). Accounting matters: Revisiting claims of decoupling and genuine green growth in Nordic countries. Ecological Economics, 187.

Tokuda, T., Ishizu, T., Nattakarn, W., Haruta, M., Noda, T., Sasagawa, K., ... Ohta, J. (2018). 1 mm3-sized optical neural stimulator based on CMOS integrated photovoltaic power receiver. AIP Advances, 8(4).

Tournerie, B. & Chouteau, M. (2002). Analysis of magnetotelluric data along the Lithoprobe seismic line 21 in the Blake River Group, Abitibi, Canada. Earth, Planets and Space, 54(5), p. 575-589.

Toussaint, C., Henry, O. & Durocher, Y. (2016). Metabolic engineering of CHO cells to alter lactate metabolism during fed-batch cultures. Journal of Biotechnology, 217(C), p. 122-131.

Trajkovic, J., Abdi, S., Nicolescu, G. & Gajski, D. D. (2012). Automated generation of custom processor core from C code. Journal of Electrical and Computer Engineering, 2012, p. 1-26.

Tremblay, J. P., Xiao, X., Aartsma-Rus, A., Barbas, C., Blau, H. M., Bogdanove, A. J., ... Gao, G. (2013). Translating the genomics revolution: the need for an international gene therapy consortium for monogenic diseases. Molecular Therapy, 21(2), p. 266-268.

Tremblay, M., Alibert, B., Desjardins, M.-A., Lafond, R. & Comeau, Y. (2020). Enlèvement de la matière organique par les étangs aérés facultatifs: facteurs influençant la performance. Vecteur Environnement, 53(3), p. 46-53.

Trofimov, A., Le Pavic, J., Pautard, S., Therriault, D. & Lévesque, M. (2022). Experimentally validated modeling of the temperature distribution and the distortion during the Fused Filament Fabrication process. Additive Manufacturing, 54. Item availablity restricted.

Trofimov, A., Le-Pavic, J., Ravey, C., Albouy, W., Therriault, D. & Lévesque, M. (2021). Multi-scale modeling of distortion in the non-flat 3D woven composite part manufactured using resin transfer molding. Composites Part A: Applied Science and Manufacturing, 140. Item availablity restricted.

Trofimov, A., Le-Pavic, J., Therriault, D. & Lévesque, M. (2021). An efficient multi-scale computation of the macroscopic coefficient of thermal expansion: Application to the resin transfer molding manufactured 3D woven composites. International Journal of Solids and Structures, 210-211, p. 162-169. Item availablity restricted.

Trpevski, I., Dimitrova, T., Boshkovski, T., Stikov, N. & Kocarev, L. (2016). Graphlet characteristics in directed networks. Scientific Reports, 6, p. 1-8.

U

Ullmann, E., Pelletier Paquette, J. F., Thong, W. & Cohen-Adad, J. (2014). Automatic labeling of vertebral levels using a robust template-based approach. International Journal of Biomedical Imaging, 2014.

Uwamahoro, M. C., Massicotte, R., Hurtubise, Y., Gagné-Bourque, F., Mafu, A. A. & Yahia, L. (2018). Evaluating the sporicidal activity of disinfectants against Clostridium difficile and Bacillus amyloliquefaciens spores by using the improved methods based on ASTM E2197-11. Frontiers Public Health, 6.

V

Vahdat, S., Lungu, O., Cohen-Adad, J., Marchand-Pauvert, V., Benali, H. & Doyon, J. (2015). Simultaneous Brain–Cervical Cord fMRI Reveals Intrinsic Spinal Cord Plasticity during Motor Sequence Learning. PLOS Biology, 13(6).

Valdes, P. A., Leblond, F., Jacobs, V. L., Wilson, B. C., Paulsen, K. D. & Roberts, D. W. (2012). Quantitative, spectrally-resolved intraoperative fluorescence imaging. Scientific Reports, 2, p. 798.

Valenzuela, E., Ramos-Sanchez, V., Lambert Arista, A. A. & Savadogo, O. (2013). Nanostructured TiO2 doped with Nb as a novel support for PEMFC. Journal of Materials, 2013, p. 1-6.

van Wendel de Joode, B., Barbeau, B., Bouchard, M. F., Mora, A. M., Skytt, Å., Córdoba, L., ... Mergler, D. (2016). Manganese concentrations in drinking water from villages near banana plantations with aerial mancozeb spraying in Costa Rica: Results from the Infants' Environmental Health Study (ISA). Environmental Pollution, 215(C), p. 247-257.

Varcheie, P. D. Z., Sills-Lavoie, M. & Bilodeau, G.-A. (2010). A Multiscale Region-Based Motion Detection and Background Subtraction Algorithm. Sensors, 10(2), p. 1041-1061.

Vazquez, D., Bernal, J., Sánchez, F. J., Fernández-Esparrach, G., López, A. M., Romero, A., ... Courville, A. (2017). A benchmark for endoluminal scene segmentation of colonoscopy images. Journal of Healthcare Engineering, 2017.

Vergé, A., Ezzati-Jivan, N. & Dagenais, M. R. (2017). Hardware-assisted software event tracing. Concurrency and Computation: Practice and Experience, 29(10), p. 1-9.

Vergé, X.P.C., Maxime, D., Dyer, J.A., Desjardins, R.L., Arcand, Y. & Vanderzaag, A. (2013). Carbon footprint of Canadian dairy products: Calculations and issues. Journal of Dairy Science, 96(9), p. 6091-6104.

Viau, S., Majeau-Bettez, G., Spreutels, L., Legros, R., Margni, M. & Samson, R. (2020). Substitution modelling in life cycle assessment of municipal solid waste management. Waste Management, 102, p. 795-803.

Villalpando, F., Reggio, M. & Ilinca, A. (2011). Assessment of turbulence models for flow simulation around a wind turbine airfoil. Modelling and Simulation in Engineering, 2011, p. 1-8.

Virolainen, A., Maurice, C. & Pabst, T. (2020). Effective oxygen diffusion coefficient of till and green liquor dregs (GLD) mixes used in sealing layer in mine waste covers. Water, Air, & Soil Pollution, 231(2).

Viveros Santos, I., Bulle, C., Levasseur, A. & Deschênes, L. (2018). Regionalized terrestrial ecotoxicity assessment of copper-based fungicides applied in viticulture. Sustainability, 10(7).

Vo, H. D. (2007). Active suppression of rotating stall inception with distributed jet actuation. International Journal of Rotating Machinery, 2007, p. 1-16.

Vulliet, F., Ben Ftima, M. & Léger, P. (2017). Stability of cracked concrete hydraulic structures by nonlinear quasi-static explicit finite element and 3D limit equilibrium methods. Computers & Structures, 184, p. 25-35.

W

Wagnac, E., Aubin, C.-É., Chaumoitre, K., Mac-Thiong, J. M., Menard, A. L., Petit, Y., ... Arnoux, P. J. (2017). Substantial vertebral body osteophytes protect against severe vertebral fractures in compression. PLOS One, 12(10).

Wang, K., Laurin, J.-J., Zhang, Q., Zhang, Q. & Wu, K. (2020). Three-dimensional scattering from uniaxial objects with a smooth boundary using a multiple infinitesimal dipole method. IEEE Access, 8, p. 80842-80854.

Wang, R., Li, L. & Simon, R. (2019). A model for describing and predicting the creep strain of rocks from the primary to the tertiary stage. International Journal of Rock Mechanics and Mining Sciences, 123, p. 104087.

Wang, S., Ajji, A., Guo, S. & Xiong, C. (2017). Preparation of microporous polypropylene/titanium dioxide composite membranes with enhanced electrolyte uptake capability via melt extruding and stretching. Polymers, 9(3).

Wang, X., Larson, A. N., Crandall, D. G., Parent, S., Labelle, H., Ledonio, C. G. T. & Aubin, C.-É. (2017). Biomechanical effect of pedicle screw distribution in AIS instrumentation using a segmental translation technique: computer modeling and simulation. Scoliosis and Spinal Disorders, 12.

Wang, Y.-C., Rheaume, É., Lesage, F. & Kakkar, A. (2018). Synthetic methodologies to gold nanoshells: An overview. Molecules, 23(11).

Warin, T. & Sanger, W. (2018). European Central Banks monetary policy decisions: A dataset of two decades of press conferences. Data in Brief, 20, p. 794-798.

Watson, M., Sawan, M. & Dancause, N. (2016). The duration of motor responses evoked with intracortical microstimulation in rats is primarily modulated by stimulus amplitude and train duration. PLOS One, 11(7), p. 1-16.

Waygood, O., Sun, Y. & Letarte, L. (2015). Active travel by built environment and lifecycle stage: Case study of Osaka metropolitan area. International Journal of Environmental Research and Public Health, 12(12), p. 15900-15924.

Wininger, F., Ezzati-Jivan, N. & Dagenais, M. R. (2017). A declarative framework for stateful analysis of execution traces. Software Quality Journal, 25(1), p. 201-229.

Winter, J., Barbeau, B. & Bérubé, P. (2017). Nanofiltration and tight ultrafiltration membranes for natural organic matter removal-contribution of fouling and concentration polarization to filtration resistance. Membranes, 7(3).

X

Xing, K., Mayer, R. & Achiche, S. (2018). Machine tool volumetric error features extraction and classification using principal component analysis and K-means. Journal of Manufacturing and Materials Processing, 2(3).

Xiong, G., Moutanabbir, O., Reiche, M., Harder, R. & Robinson, I. (2014). Coherent X-ray diffraction imaging and characterization of strain in silicon-on-insulator nanostructures. Advanced Materials, 26(46), p. 7747-7763.

Xu, C., Wu, Q., L'Espérance, G., Laberge Lebel, L. & Therriault, D. (2018). Environment-friendly and reusable ink for 3D printing of metallic structures. Materials & Design, 160, p. 262-269.

Xu, R., Soavi, F. & Santato, C. (2019). An electrochemical study on the effect of metal chelation and reactive oxygen species on a synthetic neuromelanin model. Frontiers in Bioengineering and Biotechnology, 7.

Y

Yaakoubi, Y., Soumis, F. & Lacoste-Julien, S. (2020). Machine learning in airline crew pairing to construct initial clusters for dynamic constraint aggregation. EURO Journal on Transportation and Logistics, 9(4).

Yahyaoui, A., Rmili, H., Achouri, K., Sheikh, M., Dobaie, A., Affandi, A. & Aguili, T. (2017). Transmission control of electromagnetic waves by using quarter-wave plate and half-wave plate all-dielectric metasurfaces based on elliptic dielectric resonators. International Journal of Antennas and Propagation, 2017.

Yang, K., Li, M., Zhu, G. & Savaria, Y. (2017). A DAQM-Based Load Balancing Scheme for High Performance Computing Platforms. IEEE Access, 5, p. 22504-22513.

Yang, P., Li, L. & Aubertin, M. (2017). Stress ratios in entire mine stopes with cohesionless backfill: A numerical study. Minerals, 7(10).

Yang, P., Li, L. & Aubertin, M. (2018). Theoretical and numerical analyses of earth pressure coefficient along the centerline of vertical openings with granular fills. Applied Sciences, 8(10).

Yao, L., Dimitrakopoulos, R. & Gamache, M. (2018). A new computational model of high-order stochastic simulation based on spatial Legendre moments. Mathematical Geosciences, 50(8), p. 929-960.

Yiannakas, M. C., Mustafa, A. M., De Leener, B., Kearney, H., Tur, C., Altmann, D. R., ... Wheeler-Kingshott, C. A. M. G. (2015). Fully automated segmentation of the cervical cord from T1-weighted MRI using PropSeg: Application to multiple sclerosis. NeuroImage - Clinical, 10.

Yu, C., Ji, S. & Li, Q. (2016). Effects of porosity on seismic velocities, elastic moduli and Poisson's ratios of solid materials and rocks. Journal of Rock Mechanics and Geotechnical Engineering, 8(1), p. 35-49.

Z

Zaimi, A., Duval, T., Gasecka, A., Côté, D., Stikov, N. & Cohen-Adad, J. (2016). AxonSeg: open source software for axon and myelin segmentation and morphometric analysis. Frontiers in Neuroinformatics, 10, p. 1-13.

Zaimi, A., Wabartha, M., Herman, V., Antonsanti, P.-L., Perone, C. S. & Cohen-Adad, J. (2018). AxonDeepSeg: automatic axon and myelin segmentation from microscopy data using convolutional neural networks. Scientific Reports, 8(1).

Zakeri, B., Khandal, D., Beuguel, Q., Riedl, B., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2018). Non-covalent surface modification of cellulose nanocrystals by polyethyleneimine. J-FOR The Journal of Science and Technology for Forest Products and Processes, 7(4), p. 6-12.

Zalzal, V., Gava, R., Kelouwani, S. & Cohen, P. (2009). Acropolis: A Fast Protoyping Robotic Application. International Journal of Advanced Robotic Systems, 6(1), p. 8.

Zhang, C., Bélanger, S., Pouliot, P. & Lesage, F. (2015). Measurement of Local Partial Pressure of Oxygen in the Brain Tissue under Normoxia and Epilepsy with Phosphorescence Lifetime Microscopy. PLOS One, 10(8).

Zhang, K., Peter, Y.-A. & Rochette, M. (2018). Chalcogenide Fabry–Perot Fiber Tunable Filter. IEEE Photonics Technology Letters, 30(23), p. 2013-2016.

Zhang, Q., Wong, S. W., Jin, C., Zhang, X. Y., Chen, Y., Sounas, D. & Chamanara, N. (2015). LTE Technology: Antenna, RF Front-Ends, and Channel Modeling. International Journal of Antennas and Propagation, 2015.

Zhang, Y., Jin, Y., Yao, J., Zhu, G. & Wen, B. (2017). Power peak shaving with data transmission delays for thermal management in smart buildings. IEEE Transactions on Industrial Informatics.

Zhang, Z. H., Bai, L., Hu, C. M., Hemour, S., Wu, K., Fan, X. L., ... Houssameddine, D. (2015). The tunneling magnetoresistance current dependence on cross sectional area, angle and temperature. AIP Advances, 5(3).

Zhao, J., Deng, Y., Manno, D. & Hawari, J. (2010). Shewanella spp. genomic evolution for a cold marine lifestyle and in-situ explosive biodegradation. PLoS One, 5(2), e9109.

Zhao, X., Condruz, S., Chen, J. & Jolicoeur, M. (2016). A quantitative metabolomics study of high sodium response in Clostridium acetobutylicum ATCC 824 acetone-butanol-ethanol (ABE) fermentation. Scientific Reports, 6, p. 1-13.

Zheng, J., Laparra, G., Zhu, G. & Li, M. (2020). Aggregate power control of heterogeneous TCL populations governed by Fokker–Planck equations. IEEE Transactions on Control Systems Technology, 28(5), p. 1915-1927.

Zheng, J. & Zhu, G. (2019). A De Giorgi Iteration-based Approach for the Establishment of ISS Properties for Burgers' Equation with Boundary and In-domain Disturbances. IEEE Transactions on Automatic Control, 64(8).

Zheng, J. & Zhu, G. (2015). In-Domain Control of a Heat Equation: An Approach Combining Zero-Dynamics Inverse and Differential Flatness. Mathematical Problems in Engineering, 2015, p. 1-10.

Zheng, J., Zhu, G. & Dashkovskiy, S. (2022). Relative stability in the sup-norm and input-to-state stability in the spatial sup-norm for parabolic PDEs. IEEE Transactions on Automatic Control. Item availablity restricted.

Zins, P. & Dagenais, M. R. (2019). Tracing and profiling machine learning dataflow applications on GPU. International Journal of Parallel Programming, 47(5-6), p. 973-1013.

Zitouni, F. & Lefebvre, M. (2014). Linearization of a matrix riccati equation associated to an optimal control problem. International Journal of Differential Equations, 2014.

Zou, S., Therriault, D. & Gosselin, F. P. (2018). Failure mechanisms of coiling fibers with sacrificial bonds made by instability-assisted fused deposition modeling. Soft Matter, 14(48), p. 9777-9785.

Zou, S., Therriault, D. & Gosselin, F. P. (2020). Spiderweb-inspired, transparent, impact-absorbing composite. Cell Reports Physical Science, 1(11).

Zou, S., Therriault, D. & Gosselin, F. P. (2021). Toughening elastomers via microstructured thermoplastic fibers with sacrificial bonds and hidden lengths. Extreme Mechanics Letters, 43.

This list was generated on Sat Oct 1 02:04:06 2022 EDT.