<  Back to the Polytechnique Montréal portal

Items of type "Article"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 494.

Département de génie chimique

Abdali, H. & Ajji, A. (2017). Preparation of electrospun nanocomposite nanofibers of polyaniline/poly(methyl methacrylate) with amino-functionalized graphene. Polymers, 9(9).

Ajao, O., Rahni, M., Marinova, M., Chadjaa, H. & Savadogo, O. (2017). Study of separation and fouling of reverse osmosis membranes during model hydrolysate solution filtration. Membranes, 7(4).

Allard-Massicotte, R., Chadjaa, H. & Marinova, M. (2017). Phenols removal from hemicelluloses pre-hydrolysate by laccase to improve butanol production. Fermentation, 3(3).

Ardila, N., Daigle, F., Heuzey, M.-C. & Ajji, A. (2017). Antibacterial activity of neat chitosan powder and flakes. Molecules, 22(1), p. 1-19.

Arnold, E., Hammami, I., Chen, J., Gupte, S., Durocher, Y. & Jolicoeur, M. (2016). Overexpression of G6PDH does not affect the behavior of HEK-293 clones stably expressing interferon-α2b. AIMS Bioengineering, 3(3), p. 319-336.

Aucoin, M. G., McMurray-Beaulieu, V., Poulin, F., Boivin, E. B., Chen, J., Ardelean, F. M., ... Jolicoeur, M. (2006). Identifying conditions for inducible protein production in E. coli: combining a fed-batch and multiple induction approach. Microbial Cell Factories, 5.

Bérard, A., Patience, G. S., Chouinard, G. & Tavares, J. R. (2016). Photo initiated chemical vapour deposition to increase polymer hydrophobicity. Scientific Reports, 6(1).

Beuguel, Q., Bagheriasl, D., Bruel, C., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2018). Comportement rhéologique à l’état fondu de nanocomposites à base de nanocristaux de cellulose (CNCs). Rhéologie (34), p. 10-16.

Beuguel, Q., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2018). Rheological behavior of cellulose nanocrystal suspensions in polyethylene glycol. Journal of Rheology, 62(2), p. 607-618.

Beuguel, Q., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2018). Ultrasonication of spray- and freeze-dried cellulose nanocrystals in water. Journal of Colloid and Interface Science, 516, p. 23-33.

Binette, J.-C. & Srinivasan, B. (2016). On the use of nonlinear model predictive control without parameter adaptation for batch processes. Processes, 4(3).

Boukas, E.-K. & Yang, H. (1997). Robust stability of nonlinear piecewise deterministic systems under matching conditions. Mathematical Problems in Engineering, 3(3), p. 203-215.

Brassard, D., Dubé, M. & Tavares, J. R. (2019). Resistance welding of thermoplastic composites with a nanocomposite heating element. Composites Part B: Engineering, 165, p. 779-784.

Bruel, C., Beuguel, Q., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2018). The apparent structural hydrophobicity of cellulose nanocrystals. J-FOR The Journal of Science and Technology for Forest Products and Processes, 7(4), p. 13-23.

Bruel, C., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2019). The structural amphiphilicity of cellulose nanocrystals characterized from their cohesion parameters. Carbohydrate Polymers, 205, p. 184-191.

Brunet, C., Savadogo, O., Baptiste, P. & Bouchard, M. A. (2018). Shedding some light on photovoltaic solar energy in Africa – A literature review. Renewable and Sustainable Energy Reviews, 96, p. 325-342.

Castanha, R. F., Mariano, A. P., Morais, L. A. S. , Scramin, S. & Monteiro, R. T. R. (2014). Optimization of lipids production by Cryptococcus laurentii 11 using cheese whey with molasses. Brazilian Journal of Microbiology, 45(2), p. 379-387.

Claeyssen, É., Dorion, S., Clendenning, A., He, J. Z., Wally, O., Chen, J., ... Rivoal, J. (2013). The futile cycling of hexose phosphates could account for the fact that hexokinase exerts a high control on glucose phosphorylation but not on glycolytic rate in transgenic potato (solanum tuberosum) roots. PloS One, 8(1).

Dandres, T., Farrahi Moghaddam, R., Nguyen, K. K., Lemieux, Y., Samson, R. & Cheriet, M. (2017). Consideration of marginal electricity in real-time minimization of distributed data centre emissions. Journal of Cleaner Production, 143, p. 116-124.

Dandres, T., Vandromme, N., Obrekht, G., Wong, A., Nguyen, K. K., Lemieux, Y., ... Samson, R. (2017). Consequences of future data center deployment in Canada on electricity generation and environmental impacts: a 2015-2030 prospective study. Journal of Industrial Ecology, 21(5), p. 1312-1322.

Dorval Dion, C. A., Raphael, W., Tong, E. & Tavares, J. R. (2014). Photo-initiated chemical vapor deposition of thin films using syngas for the functionalization of surfaces at room temperature and near-atmospheric pressure. Surface and Coatings Technology, 244, p. 98-108.

Dorval Dion, C.-A. & Tavares, J. R. (2013). Photo-initiated chemical vapor deposition as a scalable particle functionalization technology (a practical review). Powder Technology, 239, p. 484-491.

Edake, M., Dalil, M., Darabi Mahboub, M. J., Dubois, J.-L. & Patience, G. S. (2017). Catalytic glycerol hydrogenolysis to 1,3-propanediol in a gas–solid fluidized bed. RSC Advances, 7(7), p. 3853-3860.

Ellingsen, L., Holland, A., Drillet, J.-F., Peters, W., Eckert, M., Concepcion, C., ... Majeau-Bettez, G. (2018). Environmental screening of electrode materials for a rechargeable aluminum battery with an AlCl3/EMIMCl electrolyte. Materials, 11(6), p. 936.

Ellingsen, L. A.-W., Hung, C. R., Majeau-Bettez, G., Singh, B., Chen, Z., Whittingham, M. S. & Strømman, A. H. (2016). Nanotechnology for environmentally sustainable electromobility. Nature Nanotechnology, 11(12), p. 1039-1051.

Farand, P. & Tavares, J. R. (2017). A concept inventory for knowledge base evaluation and continuous curriculum improvement. Education for Chemical Engineers, 21, p. 33-39.

Farhanian, D., De Crescenzo, G. & Tavares, J. R. (2017). Kinetics, Chemistry, and Morphology of Syngas Photoinitiated Chemical Vapor Deposition. Langmuir, 33(8), p. 1780-1791.

Farhanian, D., De Crescenzo, G. & Tavares, J. R. (2018). Large-Scale Encapsulation of Magnetic Iron Oxide Nanoparticles via Syngas Photo-Initiated Chemical Vapor Deposition. Scientific Reports.

Farhanian, D., Dorval Dion, C. A., Raphael, W., De Crescenzo, G. & Tavares, J. R. (2014). Combined extraction and functionalization of low-cost nanoparticles from municipal solid waste fly ash through PICVD. Journal of Environmental Chemical Engineering, 2(4), p. 2242-2251.

Ghorbaniaghdam, A., Chen, J., Henry, O. & Jolicoeur, M. (2014). Analyzing Clonal Variation of Monoclonal Antibody-Producing CHO Cell Lines Using an In Silico Metabolomic Platform. PloS One, 9(3).

Goffaux, G., Hammami, I. & Jolicoeur, M. (2017). A dynamic metabolic flux analysis of myeloid-derived suppressor cells confirms immunosuppression-related metabolic plasticity. Scientific Reports, 7(1).

Grmela, M. (2014). Contact geometry of mesoscopic thermodynamics and dynamics. Entropy, 16(3), p. 1652-1686.

Grmela, M. (2015). Geometry of Multiscale Nonequilibrium Thermodynamics. Entropy, 17(9), p. 5938-5964.

Grmela, M. (2016). Role of thermodynamics in extensions of mesoscopic dynamical theories. Communications in Applied and Industrial Mathematics, 7(2), p. 56-80.

Grmela, M., Grazzini, G., Lucia, U. & Yahia, L. (2013). Multiscale Mesoscopic Entropy of Driven Macroscopic Systems. Entropy, 15(11), p. 5053-5064.

Hadjizadeh, A., Savoji, H. & Ajji, A. (2016). A Facile Approach for the Mass Production of Submicro/Micro Poly (Lactic Acid) Fibrous Mats and Their Cytotoxicity Test towards Neural Stem Cells. BioMed Research International, 2016.

Hammami, I., Chen, J., Murschel, F., Bronte, V., De Crescenzo, G. & Jolicoeur, M. (2012). Immunosuppressive activity enhances central carbon metabolism and bioenergetics in myeloid-derived suppressor cells in vitro models. BMC Cell Biology, 13.

Harvey, V. C., Farand, P., Legros, R. & Tavares, J. R. (2015). On the average perception of perceived averages. Education for Chemical Engineers, 12, p. 12-19.

Hoemann, C. D., Guzmán-Morales, J., Tran-Khanh, N., Lavallée, G., Jolicoeur, M. & Lavertu, M. (2013). Chitosan rate of uptake in HEK293 cells is influenced by soluble versus microparticle state and enhanced by serum-induced cell metabolism and lactate-based media acidification. Molecules, 18(1), p. 1015-1035.

Hosseininasab, S., Faucheux, N., Soucy, G. & Tavares, J. R. (2017). Full range of wettability through surface modification of single-wall carbon nanotubes by photo-initiated chemical vapour deposition. Chemical Engineering Journal, 325, p. 101-113.

Hung, C. R., Ellingsen, L. A.-W. & Majeau-Bettez, G. (2020). LiSET: A framework for early-stage life cycle screening of emerging technologies. Journal of Industrial Ecology, 24(1), p. 26-37.

Jafari, R., Tanguy, P. A. & Chaouki, J. (2012). Characterization of minimum impeller speed for suspension of solids in liquid at high solid concentration, using gamma-ray densitometry. International Journal of Chemical Engineering, 2012, p. 1-15.

Javanbakht, T., Bérard, A. & Tavares, J. R. (2016). Polyethylene glycol and poly(vinyl alcohol) hydrogels treated with photo-initiated chemical vapor deposition. Canadian Journal of Chemistry/Revue canadienne de chimie, 94(9), p. 744-750.

Javanbakht, T., Laurent, S., Stanicki, D., Raphael, W. & Tavares, J. R. (2015). Charge effect of superparamagnetic iron oxide nanoparticles on their surface functionalization by photo-initiated chemical vapour deposition. Journal of Nanoparticle Research, 17(12).

Jolicoeur, M. (2014). Modeling cell behavior: moving beyond intuition. AIMS Bioengineering, 1(1).

Kasparek, E., Tavares, J. R., Wertheimer, M. R. & Girard-Lauriault, P.-L. (2016). Sulfur-rich organic films deposited by plasma- and vacuum-ultraviolet (VUV) photo-polymerization. Plasma Processes and Polymers, 13(9), p. 888-899.

Kasparek, E., Tavares, J. R., Wertheimer, M. R. & Girard-Lauriault, P.-L. (2018). VUV Photodeposition of Thiol-Terminated Films: A Wavelength-Dependent Study. Langmuir, 34(41), p. 12234-12243.

Kasparek, E., Thiry, D., Tavares, J. R., Wertheimer, M. R., Snyders, R. & Girard-Lauriault, P.-L. (2018). Growth mechanisms of sulfur-rich plasma polymers: Binary gas mixtures versus single precursor. Plasma Processes and Polymers, 15(7), p. 1800036.

Khan, H., Swati, I. K., Younas, M. & Ullah, A. (2017). Chelated nitrogen-sulphur-codoped TiO₂: synthesis, characterization, mechanistic, and UV/visible photocatalytic studies. International Journal of Photoenergy, 2017.

Khandal, D., Riedl, B., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2019). Tailoring cellulose nanocrystals rheological behavior in aqueous suspensions through surface functionalization with polyethyleneimine. Physics of Fluids, 31(2), 021207.

Kim, W.-Y., Pelton, A., Bale, C., Bélisle, E. & Decterov, S. (2013). Modeling the viscosity of silicate melts containing manganese oxide. Journal of Mining and Metallurgy, Section B: Metallurgy, 49(3), p. 323-337.

Labonté, V., Marion, A., Virgilio, N. & Tavares, J. R. (2016). Gas-phase surface engineering of polystyrene beads used to challenge automated particle inspection systems. Industrial & Engineering Chemistry Research, 55(27), p. 7362-7372.

Lafantaisie-Favreau, C.-H., Guzmán-Morales, J., Sun, J., Chen, G., Harris, A., Smith, T. D., ... Hoemann, C. D. (2013). Subchondral pre-solidified chitosan/blood implants elicit reproducible early osteochondral wound-repair responses including neutrophil and stromal cell chemotaxis, bone resorption and repair, enhanced repair tissue integration and delayed matrix deposition. BMC Musculoskeletal Disorders, 14.

Laflaquière, B., Leclercq, G., Choey, C., Chen, J., Peres, S., Ito, C. & Jolicoeur, M. (2018). Identifying biomarkers of Wharton's Jelly mesenchymal stromal cells using a dynamic metabolic model: the cell passage effect. Metabolites, 8(1).

Majeau-Bettez, G., Dandres, T., Pauliuk, S., Wood, R., Hertwich, E., Samson, R. & Strømman, A. H. (2018). Choice of allocations and constructs for attributional or consequential life cycle assessment and input-output analysis. Journal of Industrial Ecology, 22(4), p. 656-670.

Majeau-Bettez, G., Pauliuk, S., Wood, R., Bouman, E. A. & Strømman, A. H. (2016). Balance issues in input–output analysis: A comment on physical inhomogeneity, aggregation bias, and coproduction. Ecological Economics, 126, p. 188-197.

Majeau-Bettez, G., Wood, R. & Strømman, A. H. (2016). On the financial balance of input–output constructs: revisiting an axiomatic evaluation. Economic Systems Research, 28(3), p. 333-343.

Mehand, M. S., Srinivasan, B. & De Crescenzo, G. (2015). Optimizing Multiple Analyte Injections in Surface Plasmon Resonance Biosensors with Analytes having Different Refractive Index Increments. Scientific Reports, 5.

Merzouki, A., Alameh, M., DeJesus, D., Jean, M., Darras, V., Thibault, M., ... Buschmann, M. D. (2012). Low molecular weight chitosan nanoparticulate system at low N:P ratio for nontoxic polynucleotide delivery. International Journal of Nanomedicine, 7, p. 1399-1414.

Mighri, N., Mao, J., Mighri, F., Ajji, A. & Rouabhia, M. (2015). Chitosan-Coated Collagen Membranes Promote Chondrocyte Adhesion, Growth, and Interleukin-6 Secretion. Materials, 8(11), p. 7673-7689.

Mukherjee, A., Knoch, S., Chouinard, G., Tavares, J. R. & Dumont, M.-J. (2019). Use of bio-based polymers in agricultural exclusion nets: A perspective. Biosystems Engineering, 180, p. 121-145.

Nada, O., Marian, A., Tran-Khanh, N., Buschmann, M., Podtetenev, M., Vidal, F., ... Brunette, I. (2014). Effect of Corneal Hydration on the Quality of the Femtosecond Laser Anterior Lamellar Cut. PloS One, 9(6).

Nasri Lari, H., Chaouki, J. & Tavares, J. R. (2017). De-agglomeration of nanoparticles in a jet impactor-assisted fluidized bed. Powder Technology, 316, p. 455-461.

Nasri Lari, H., Farhanian, D., Boffito, D. C., Patience, G. S., De Crescenzo, G., Chaouki, J. & Tavares, J. R. (2017). Shedding light on iron pentacarbonyl photochemistry through a CVD case study. Catalysis Communications, 100, p. 19-23.

Patience, G. S., Patience, C. A., Blais, B. & Bertrand, F. (2017). Citation analysis of scientific categories. Heliyon, 3(5).

Pavelka, M., Klika, V. & Grmela, M. (2018). Thermodynamic explanation of Landau damping by reduction to hydrodynamics. Entropy, 20(6).

Peres, S., Jolicoeur, M., Moulin, C., Dague, P. & Schuster, S. (2017). How important is thermodynamics for identifying elementary flux modes? PLoS ONE, 12(2), p. 1-20.

Pérez-Rocha, D., Morales-Cepeda, A. B., Navarro-Pardo, F., Lozano-Ramírez, T. & Lafleur, P. G. (2015). Carbon Fiber Composites of Pure Polypropylene and Maleated Polypropylene Blends Obtained from Injection and Compression Moulding. International Journal of Polymer Science, 2015, p. 1-8.

Petiot, E., Jacob, D., Lanthier, S., Lohr, V., Ansorge, S. & Kamen, A. A. (2011). Metabolic and Kinetic analyses of influenza production in perfusion HEK293 cell culture. BMC Biotechnology, 11, p. 84.

Pickenhahn, V., Darras, V., Dziopa, F., Biniecki, K., De Crescenzo, G., Lavertu, M. & Buschmann, M. (2015). Regioselective thioacetylation of chitosan end-groups for nanoparticle gene delivery systems. Chemical Science, 6(8), p. 4650.

Pickenhahn, V., Grange, M., De Crescenzo, G., Lavertu, M. & Buschmann, M. (2017). Regioselective chitosan end-group activation: the triskelion approach. RSC Advances, 7(30), p. 18628-18638.

Poliquin, P. O., Chen, J., Cloutier, M., Trudeau, L.-É. & Jolicoeur, M. (2013). Metabolomics and in-silico analysis reveal critical energy deregulations in animal models of Parkinson’s disease. PloS One, 8(7).

Rajagopalan, S., Sawan, M., Ghafar-Zadeh, E., Savadogo, O. & Chodavarapu, V. (2008). A Polypyrrole-based Strain Sensor Dedicated to Measure Bladder Volume in Patients with Urinary Dysfunction. Sensors, 8(8).

Raphael, W., Martel, T., Landry, V. & Tavares, J. R. (2018). Surface engineering of wood substrates to impart barrier properties: a photochemical approach. Wood Science and Technology, 52(1), p. 193-207.

Ren, X., Zhao, X., Turcotte, F., Deschênes, J.-S., Tremblay, R. & Jolicoeur, M. (2017). Current lipid extraction methods are significantly enhanced adding a water treatment step in Chlorella protothecoides. Microbial Cell Factories, 16, p. 1-13.

Reyjal, M., Tavares, J. R., Virgilio, N. & Fradette, L. (2013). Is the Maxwell–Garnett continuum model valid to predict the thermal conductivity of particle-stabilized (Pickering) emulsions? Industrial & Engineering Chemistry Research, 52(13), p. 4962-4966.

Robitaille, J., Chen, J. & Jolicoeur, M. (2015). A Single Dynamic Metabolic Model Can Describe mAb Producing CHO Cell Batch and Fed-Batch Cultures on Different Culture Media. PloS One, 10(9).

Rodríguez Varela, F. J., Luna, S. & Savadogo, O. (2009). Synthesis and Evaluation of Highly Tolerant Pd Electrocatalysts as Cathodes in Direct Ethylene Glycol Fuel Cells (DEGFC). Energies, 2(4), p. 944-956.

Rokbani, H., Daigle, F. & Ajji, A. (2018). Combined effect of ultrasound stimulations and autoclaving on the enhancement of antibacterial activity of ZnO and SiO₂/ZnO nanoparticles. Nanomaterials, 8(3).

Sabri, F., Berthomier, K., Marion, A., Fradette, L., Tavares, J. R. & Virgilio, N. (2018). Sodium alginate-grafted submicrometer particles display enhanced reversible aggregation/disaggregation properties. Carbohydrate Polymers, 194, p. 61-68.

Sabri, F., Berthomier, K., Wang, C.-S., Fradette, L., Tavares, J. R. & Virgilio, N. (2019). Tuning particle–particle interactions to control Pickering emulsions constituents separation. Green Chemistry, 21(5), p. 1065-1074.

Seifitokaldani, A., Gheribi, A. E., Phan, A. T., Chartrand, P. & Dollé, M. (2016). Important variation in vibrational properties of LiFePO4 and FePO4 induced by magnetism. Scientific Reports, 6, p. 1-10.

Simard, P., Galarneau, H., Marois, S., Rusu, D., Hoemann, C. D., Poubelle, P. E., ... Fernandes, M. J.G. (2009). Neutrophils exhibit distinct phenotypes toward chitosans with different degrees of deacetylation: implications for cartilage repair. Arthritis Research and Therapy, 11(3).

Somé, A., Dandres, T., Gaudreault, C., Majeau-Bettez, G., Wood, R. & Samson, R. (2018). Coupling input-output tables with macro-life cycle assessment to assess worldwide impacts of biofuels transport policies. Journal of Industrial Ecology, 22(4), p. 643-655.

Stucchi, M., Boffito, D. C., Pargoletti, E., Cerrato, G., Bianchi, C. L. & Cappelletti, G. (2018). Nano-MnO₂ decoration of TiO₂ microparticles to promote gaseous ethanol visible photoremoval. Nanomaterials, 8(9).

Thalla, P. K., Contreras-García, A., Fadlallah, H., Barrette, J., De Crescenzo, G., Merhi, Y. & Lerouge, S. (2013). A Versatile Star PEG Grafting Method for the Generation of Nonfouling and Nonthrombogenic Surfaces. BioMed Research International, 2013.

Thibault, M., Nimesh, S., Lavertu, M. & Buschmann, M. (2010). Intracellular Trafficking and Decondensation Kinetics of Chitosan–pDNA Polyplexes. Molecular Therapy, 18(10), p. 1787-1795.

Thompson, C. M., Petiot, E., Lennaertz, A., Henry, O. & Kamen, A. A. (2013). Analytical technologies for influenza virus-like particle candidate vaccines: challenges and emerging approaches. Virology Journal, 10.

Thompson, C. M., Petiot, E., Mullick, A., Aucoin, M. G., Henry, O. & Kamen, A. A. (2015). Critical assessment of influenza VLP production in Sf9 and HEK293 expression systems. BMC Biotechnology, 15.

Toussaint, C., Henry, O. & Durocher, Y. (2016). Metabolic engineering of CHO cells to alter lactate metabolism during fed-batch cultures. Journal of Biotechnology, 217(C), p. 122-131.

Valenzuela, E., Ramos-Sanchez, V., Lambert Arista, A. A. & Savadogo, O. (2013). Nanostructured TiO2 doped with Nb as a novel support for PEMFC. Journal of Materials, 2013, p. 1-6.

Vergé, X.P.C., Maxime, D., Dyer, J.A., Desjardins, R.L., Arcand, Y. & Vanderzaag, A. (2013). Carbon footprint of Canadian dairy products: Calculations and issues. Journal of Dairy Science, 96(9), p. 6091-6104.

Viau, S., Majeau-Bettez, G., Spreutels, L., Legros, R., Margni, M. & Samson, R. (2020). Substitution modelling in life cycle assessment of municipal solid waste management. Waste Management, 102, p. 795-803.

Viveros Santos, I., Bulle, C., Levasseur, A. & Deschênes, L. (2018). Regionalized terrestrial ecotoxicity assessment of copper-based fungicides applied in viticulture. Sustainability, 10(7).

Zakeri, B., Khandal, D., Beuguel, Q., Riedl, B., Tavares, J. R., Carreau, P. J. & Heuzey, M.-C. (2018). Non-covalent surface modification of cellulose nanocrystals by polyethyleneimine. J-FOR The Journal of Science and Technology for Forest Products and Processes, 7(4), p. 6-12.

Zhao, X., Condruz, S., Chen, J. & Jolicoeur, M. (2016). A quantitative metabolomics study of high sodium response in Clostridium acetobutylicum ATCC 824 acetone-butanol-ethanol (ABE) fermentation. Scientific Reports, 6, p. 1-13.

Département de génie informatique et génie logiciel

Abbasi, H., Ezzati-Jivan, N., Bellaïche, M., Talhi, C. & Dagenais, M. R. (2019). Machine learning-based EDoS attack detection technique using execution trace analysis. Journal of Hardware and Systems Security, 3(2), p. 164-176.

Abondo, C. & Pierre, S. (2005). Dynamic location and forwarding pointers for mobility management. Mobile Information Systems, 1, p. 3-24.

Adegbindin, M., Hertz, A. & Bellaïche, M. (2016). A new efficient RLF-like algorithm for the vertex coloring problem. Yugoslav Journal of Operations Research, 26(4), p. 441-456.

Aloise, D. & Contardo, C. (2018). A sampling-based exact algorithm for the solution of the minimax diameter clustering problem. Journal of Global Optimization, 71(3), p. 613-630.

Beamonte, R. & Dagenais, M. R. (2016). Detection of common problems in real-Time and multicore systems using model-based constraints. Scientific Programming, 2016, p. 1-18.

Beaubrun, R., Llano-Ruiz, J.-F. & Quintero, A. (2012). An approach for designing and implementing middleware in wireless sensor networks. Sensors & Transducers, 14-2, p. 150-163.

Beltrame, G. (2015). Triple Modular Redundancy verification via heuristic netlist analysis. PeerJ Computer Science.

Benbachir, A. & Dagenais, M. R. (2018). Hypertracing: Tracing through virtualization layers. IEEE Transactions on Cloud Computing, p. 1-17.

Bertauld, T. & Dagenais, M. R. (2017). Low-level trace correlation on heterogeneous embedded systems. EURASIP Journal on Embedded Systems, 2017(1), p. 1-14.

Biancheri, C. & Dagenais, M. R. (2016). Fine-grained multilayer virtualized systems analysis. Journal of Cloud Computing, 5(1), p. 1-14.

Bonguet, A. & Bellaïche, M. (2017). A survey of denial-of-service and distributed denial of service attacks and defenses in cloud computing. Future Internet, 9(3).

Charton, E., Meurs, M.-J., Jean-Louis, L. & Gagnon, M. (2013). Using collaborative tagging for text classification: from text classification to opinion mining. Informatics, 1(1), p. 32-51.

Chen, C. & Beltrame, G. (2017). An adaptive Markov model for the timing analysis of probabilistic caches. ACM Transactions on Design Automation of Electronic Systems, 23(1), p. 1-24.

Chevrefils, C., Cheriet, F., Grimard, G., Miron, M.-C. & Aubin, C.-É. (2012). Quantitative evaluation of an automatic segmentation method for 3D reconstruction of intervertebral scoliotic disks from MR images. BMC Medical Imaging, 12.

Clément, É. & Dagenais, M. R. (2009). Traces synchronization in distributed networks. Journal of Computer Systems, Networks, and Communications, 2009, p. 1-11.

Côté, J., Cossette, S., Ramirez-Garcia, P., De Pokomandy, A., Worthington, C., Gagnon, M.-P., ... Tremblay, C. (2015). Evaluation of a Web-based tailored intervention (TAVIE en santé) to support people living with HIV in the adoption of health promoting behaviours: an online randomized controlled trial protocol. BMC Public Health, 15.

Côté, J., Godin, G., Guéhéneuc, Y.-G., Rouleau, G., Ramirez-Garcìa, P., Otis, J., ... Fadel, G. (2012). Evaluation of a real-time virtual intervention to empower persons living with HIV to use therapy self-management: study protocol for an online randomized controlled trial. Trials, 13.

Dallaire, F., Picot, F., Tremblay, J.-P., Sheehy, G., Lemoine, É., Agarwal, R., ... Leblond, F. (2020). Quantitative spectral quality assessment technique validated using intraoperative in vivo Raman spectroscopy measurements. Journal of Biomedical Optics, 25(4).

Desfossez, J., Desnoyers, M. & Dagenais, M. R. (2016). Runtime latency detection and analysis. Software: Practice and Experience, 46(10), p. 1397-1409.

Doray, F. & Dagenais, M. R. (2016). Diagnosing performance variations by comparing multi-level execution traces. IEEE Transactions on Parallel and Distributed Systems, 28(2), p. 462-474.

Ezzati-Jivan, N. & Dagenais, M. R. (2015). Cube data model for multilevel statistics computation of live execution traces. Concurrency and Computation: Practice and Experience, 27(5), p. 1069-1091.

Ezzati-Jivan, N. & Dagenais, M. R. (2013). A framework to compute statistics of system parameters from very large trace files. ACM SIGOPS Operating Systems Review, 47(1), p. 43-54.

Ezzati-Jivan, N. & Dagenais, M. R. (2017). Multi-scale navigation of large trace data: A survey. Concurrency and Computation: Practice and Experience, 29(10), p. 1-20.

Gebai, M. & Dagenais, M. R. (2018). Survey and analysis of kernel and userspace tracers on Linux : design, implementation, and overhead. ACM Computing Surveys, 51(2), 26:1-26:33.

Giraldeau, F. & Dagenais, M. R. (2016). Wait analysis of distributed systems using kernel tracing. IEEE Transactions on Parallel and Distributed Systems, 27(8), p. 2450-2461.

Gonçalves-e-Silva, K., Aloise, D., Xavier-De-Souza, S. & Mladenović, N. (2018). Less is more: simplified Nelder-Mead method for large unconstrained optimization. Yugoslav Journal of Operations Research, 28(2), p. 153-169.

Hafnaoui, I., Ayari, R., Nicolescu, G. & Beltrame, G. (2017). Scheduling real-time systems with cyclic dependence using data criticality. Design Automation for Embedded Systems, 21(2), p. 117-136.

Harmouche, R., Cheriet, F., Labelle, H. & Dansereau, J. (2013). Multimodal image registration of the scoliotic torso for surgical planning. BMC Medical Imaging, 13.

Heidari, P. & Boucheneb, H. (2013). Controller synthesis of time petri nets using stopwatch. Journal of Engineering, 2013, p. 1-13.

Kerzazi, N., Lavallée, M. & Robillard, P. N. (2013). A knowledge-based perspective for software process modeling. e-Informatica Software Engineering Journal, 7(1), p. 25-33.

Kosmas, P., Chen, Y. & Martel, S. (2013). A Feasibility Study for Microwave Breast Cancer Detection Using Contrast-Agent-Loaded Bacterial Microbots. International Journal of Antennas and Propagation, 2013, p. 1-11.

Lafrance, S. (2004). Symbolic approach to the analysis of security protocols. Journal of Universal Computer Science, 10(9), p. 1156-1198.

Lafrance, S. & Mullins, J. (2003). An information flow method to detect denial of service vulnerabilities. Journal of Universal Computer Science, 9(11), p. 1350-1369.

Lange Di Cesare, K., Zouaq, A., Gagnon, M. & Jean-Louis, L. (2018). A machine learning filter for the slot filling task. Information, 9(6).

Lavallée, M. & Robillard, P. N. (2018). Are we working well with others? How the multi team systems impact software quality. e-Informatica Software Engineering Journal, 12(1), p. 117-131.

Martel, S. (2013). Combining Pulsed and DC Gradients in a Clinical MRI-Based Microrobotic Platform to Guide Therapeutic Magnetic Agents in the Vascular Network. International Journal of Advanced Robotic Systems, 10(1).

Martel, S. & Mohammadi, M. (2016). Switching between magnetotactic and aerotactic displacement controls to enhance the efficacy of MC-1 magneto-aerotactic bacteria as cancer-fighting nanorobots. Micromachines, 7(6), p. 1-12.

Nadeau, D., Ezzati-Jivan, N. & Dagenais, M. R. (2019). Efficient large-scale heterogeneous debugging using dynamic tracing. Journal of Systems Architecture, 98, p. 346-360.

Nemati, H. & Dagenais, M. R. (2018). virtFlow: guest independent execution flow analysis across virtualized environments. IEEE Transactions on Cloud Computing, p. 1-15.

Phan, T. V., Seoud, L., Chakor, H. & Cheriet, F. (2016). Automatic screening and grading of age-related macular degeneration from texture analysis of fundus images. Journal of Ophthalmology, 2016, p. 1-11.

Pinciroli, C. & Beltrame, G. (2016). Swarm-Oriented Programming of Distributed Robot Networks. Computer, 49(12), p. 32-41.

Prieur-Drevon, L., Beamonte, R. & Dagenais, M. R. (2018). R-SHT: A state history tree with R-Tree properties for analysis and visualization of highly parallel system traces. Journal of Systems and Software, 135, p. 55-68.

Reumont-Locke, F., Ezzati-Jivan, N. & Dagenais, M. R. (2019). Efficient methods for trace analysis parallelization. International Journal of Parallel Programming, 47(5-6), p. 951-972.

Rohrbach, A., Torabi, A., Rohrbach, M., Tandon, N., Pal, C., Larochelle, H., ... Schiele, B. (2017). Movie description. International Journal of Computer Vision, 123(1), p. 94-120.

Shameli-Sendi, A., Desfossez, J., Dagenais, M. R. & Jabbarifar, M. (2013). A retroactive-burst framework for automated intrusion response system. Journal of Computer Networks and Communications, 2013, p. 1-8.

Shameli-Sendi, A., Jabbarifar, M., Dagenais, M. R. & Shajari, M. (2012). System health monitoring using a novel method : security unified process. Journal of Computer Networks and Communications, 2012, p. 1-20.

Sharma, S. D. & Dagenais, M. R. (2016). Hardware-assisted instruction profiling and latency detection. The Journal of Engineering, 2016(10), p. 367-376.

Trajkovic, J., Abdi, S., Nicolescu, G. & Gajski, D. D. (2012). Automated generation of custom processor core from C code. Journal of Electrical and Computer Engineering, 2012, p. 1-26.

Varcheie, P. D. Z., Sills-Lavoie, M. & Bilodeau, G.-A. (2010). A Multiscale Region-Based Motion Detection and Background Subtraction Algorithm. Sensors, 10(2), p. 1041-1061.

Vazquez, D., Bernal, J., Sánchez, F. J., Fernández-Esparrach, G., López, A. M., Romero, A., ... Courville, A. (2017). A benchmark for endoluminal scene segmentation of colonoscopy images. Journal of Healthcare Engineering, 2017.

Vergé, A., Ezzati-Jivan, N. & Dagenais, M. R. (2017). Hardware-assisted software event tracing. Concurrency and Computation: Practice and Experience, 29(10), p. 1-9.

Wininger, F., Ezzati-Jivan, N. & Dagenais, M. R. (2017). A declarative framework for stateful analysis of execution traces. Software Quality Journal, 25(1), p. 201-229.

Zalzal, V., Gava, R., Kelouwani, S. & Cohen, P. (2009). Acropolis: A Fast Protoyping Robotic Application. International Journal of Advanced Robotic Systems, 6(1), p. 8.

Zins, P. & Dagenais, M. R. (2019). Tracing and profiling machine learning dataflow applications on GPU. International Journal of Parallel Programming, 47(5-6), p. 973-1013.

Département de génie mécanique

Aïssa, B., Therriault, D., Haddad, E. & Jamroz, W. (2012). Self-Healing Materials Systems: Overview of Major Approaches and Recent Developed Technologies. Advances in Materials Science and Engineering, 2012, p. 1-17.

Allet, A. & Paraschivoiu, I. (1995). Viscous flow and dynamic stall effects on vertical-axis wind turbines. International Journal of Rotating Machinery, 2(1), p. 1-14.

Alzahrani, M. M., Anam, E. A., Makhdom, A. M., Villemure, I. & Hamdy, R. C. (2014). The effect of altering the mechanical loading environment on the expression of bone regenerating molecules in cases of distraction osteogenesis. Frontiers in Endocrinology, 5.

Appio, F. P., Achiche, S., Martini, A. & Beaudry, C. (2017). On designers’ use of biomimicry tools during the new product development process: an empirical investigation. Technology Analysis & Strategic Management, p. 1-15.

Belzile, B. & Birglen, L. (2018). Practical considerations on proprioceptive tactile sensing for underactuated fingers. Transactions of the Canadian Society for Mechanical Engineering, 42(1), p. 71-79.

Benjelloun, K. & Boukas, E.-K. (1997). Stochastic stability of linear time-delay system with Markovian jumping parameters. Mathematical Problems in Engineering, 3(3), p. 187-201.

Benjelloun, K., Boukas, E.-K., Costa, O. L. V. & Shi, P. (1998). Design of robust controller for linear systems with Markovian jumping parameters. Mathematical Problems in Engineering, 4(4), p. 269-288.

Bennacer, R., Reggio, M., Pellerin, N. & Ma, X. (2017). Differentiated heated lid driven cavity interacting with tube: a lattice Boltzmann study. Thermal Science, 21(1A), p. 89-104.

Bensadoun, F., Kchit, N., Billotte, C., Bickerton, S., Trochu, F. & Ruiz, E. (2011). A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding. International Journal of Polymer Science, 2011.

Bensadoun, F., Kchit, N., Billotte, C., Trochu, F. & Ruiz, E. (2011). A Comparative Study of Dispersion Techniques for Nanocomposite Made with Nanoclays and an Unsaturated Polyester Resin. Journal of Nanomaterials, 2011, p. 406087.

Bernier, M. (2019). A review of vertical ground heat exchanger sizing tools including an inter-model comparison. Renewable and Sustainable Energy Reviews, 110, p. 247-265.

Bernier, M. & Brussieux, Y. (2019). Universal short time g*-functions : generation and application. Science and Technology for the Built Environment, 25(8), p. 993-1006.

Billotte, C., Roland Fotsing, E. & Ruiz, E. (2017). Optimization of alumina slurry for oxide-oxide ceramic composites manufactured by injection molding. Advances in Materials Science and Engineering, 2017.

Birglen, L. (2019). Design of a partially-coupled self-adaptive robotic finger optimized for collaborative robots. Autonomous Robots, 43(2), p. 523-538.

Birglen, L. (2010). From flapping wings to underactuated fingers and beyond: a broad look to self-adaptive mechanisms. Mechanical Sciences, 1(1), p. 5-12.

Birglen, L. (2011). The kinematic preshaping of triggered self-adaptive linkage-driven robotic fingers. Mechanical Sciences, 2(1), p. 41-49.

Bouheret, S. & Bernier, M. (2018). Modelling of a water-to-air variable capacity ground-source heat pump. Journal of Building Performance Simulation, 11(3), p. 1-11.

Boukas, E. K. & Al-Muthairi, N. F. (2004). ℋ∞constant gain state feedback stabilization of stochastic hybrid systems with Wiener process. Mathematical Problems in Engineering, 2004(4), p. 333-345.

Boukas, E.-K. (2006). Discrete-time systems with time-varying time delay: Stability and stabilizability. Mathematical Problems in Engineering, 2006, p. 42489.

Boukas, E.-K., Shi, P., Karan, M. & Kaya, C. Y. (2002). Linear discrete-time systems with Markovian jumps and mode dependent time-delay: Stability and stabilizability. Mathematical Problems in Engineering, 8(2), p. 123-133.

Boukas, E.-K. & Yang, H. (1996). Stability of stochastic systems with jumps. Mathematical Problems in Engineering, 3(2), p. 173-185.

Brahimi, M. T., Allet, A. & Paraschivoiu, I. (1995). Aerodynamic analysis models for vertical-axis wind turbines. International Journal of Rotating Machinery, 2(1), p. 15-21.

Castro, L., Urquiza, G., Adamkowski, A. & Reggio, M. (2011). Experimental and numerical simulations predictions comparison of power and efficiency in hydraulic turbine. Modelling and Simulation in Engineering, 2011, p. 1-8.

Causse, P., Ravey, C. & Trochu, F. (2018). Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding. Journal of Composites Science, 2(2).

Chevrefils, C., Cheriet, F., Grimard, G., Miron, M.-C. & Aubin, C.-É. (2012). Quantitative evaluation of an automatic segmentation method for 3D reconstruction of intervertebral scoliotic disks from MR images. BMC Medical Imaging, 12.

Cimmino, M. (2018). Fast calculation of the g-functions of geothermal borehole fields using similarities in the evaluation of the finite line source solution. Journal of Building Performance Simulation, 11(6), p. 655-668.

Cimmino, M. (2018). A finite line source simulation model for geothermal systems with series- and parallel-connected boreholes and independent fluid loops. Journal of Building Performance Simulation, 11(4), p. 414-432.

Cobetto, N., Aubin, C.-É., Clin, J., Le May, S., Desbiens-Blais, F., Labelle, H. & Parent, S. (2014). Braces optimized with computer-assisted design and simulations are lighter, more comfortable, and more efficient than plaster-cast braces for the treatment of adolescent idiopathic scoliosis. Spine Deformity, 2(4), p. 276-284.

Cobetto, N., Aubin, C.-É., Parent, S., Barchi, S., Turgeon, I. & Labelle, H. (2017). 3D correction of AIS in braces designed using CAD/CAM and FEM: a randomized controlled trial. Scoliosis and Spinal Disorders, 12(1).

Cobetto, N., Aubin, C.-É., Parent, S., Clin, J., Barchi, S., Turgeon, I. & Labelle, H. (2016). Effectiveness of braces designed using computer-aided design and manufacturing (CAD/CAM) and finite element simulation compared to CAD/CAM only for the conservative treatment of adolescent idiopathic scoliosis: a prospective randomized controlled trial. European Spine Journal, 25(10), p. 3056-3064.

Corcoran, A., Eslami-Nejad, P., Bernier, M. & Badache, M. (2019). Calibration of thermal response test (TRT) units with a virtual borehole. Geothermics, 79, p. 105-113.

Delcroix, B., Le Ny, J., Bernier, M., Azam, M., Qu, B. & Venne, J.-S. (2020). Autoregressive neural networks with exogenous variables for indoor temperature prediction in buildings. Building Simulation.

Demers, V., Demarquette, N. R., Turenne, S. & Scalzo, O. (2016). Molding Properties of Inconel 718 Feedstocks Used in Low-Pressure Powder Injection Molding. Advances in Materials Science and Engineering, 2016, p. 1-7.

Dupuis, S., Fortin, C., Caouette, C., Leclair, I. & Aubin, C.-É. (2018). Global postural re-education in pediatric idiopathic scoliosis: a biomechanical modeling and analysis of curve reduction during active and assisted self-correction. BMC Musculoskeletal Disorders, 19.

Faucheux, P. A., Gosselin, F. P. & Lévesque, M. (2018). Simulating shot peen forming with eigenstrains. Journal of Materials Processing Technology, 254, p. 135-144.

Fedorov, D. & Birglen, L. (2018). Differential noncircular pulleys for cable robots and static balancing. Journal of Mechanisms and Robotics, 10(6), p. 1-8.

Fedorov, D. & Birglen, L. (2018). Geometric optimization of a self-adaptive robotic leg. Transactions of the Canadian Society for Mechanical Engineering, 42(1), p. 49-60.

Fradet, L., Arnoux, P.-J., Callot, V. & Petit, Y. (2016). Geometrical variations in white and gray matter affect the biomechanics of spinal cord injuries more than the arachnoid space. Advances in Mechanical Engineering, 8(8), p. 168781401666470.

Gagné-Boisvert, L. & Bernier, M. (2018). Integrated model for comparison of one- and two-pipe ground-coupled heat pump network configurations. Science and Technology for the Built Environment, 24(7), p. 726-742.

Gervais, J., Périé-Curnier, D., Parent, S., Labelle, H. & Aubin, C.-É. (2012). MRI signal distribution within the intervertebral disc as a biomarker of adolescent idiopathic scoliosis and spondylolisthesis. BMC Musculoskeletal Disorders, 13.

Grmela, M., Grazzini, G., Lucia, U. & Yahia, L. (2013). Multiscale Mesoscopic Entropy of Driven Macroscopic Systems. Entropy, 15(11), p. 5053-5064.

Hajj-Hassan, M., Gonzalez, T., Ghafar-Zadeh, E., Djeghelian, H., Chodavarapu, V., Andrews, M. & Therriault, D. (2008). Direct-Dispense Polymeric Waveguides Platform for Optical Chemical Sensors. Sensors, 8(12).

Harmouche, R., Cheriet, F., Labelle, H. & Dansereau, J. (2013). Multimodal image registration of the scoliotic torso for surgical planning. BMC Medical Imaging, 13.

Kuhn, M. & Napporn, T. (2010). Single-Chamber Solid Oxide Fuel Cell Technology—From Its Origins to Today’s State of the Art. Energies, 3(1), p. 57-134.

Le Cunff, C., Biolley, F., Fontaine, E., Étienne, S. & Facchinetti, M. L. (2002). Vortex-induced vibrations of risers: theoretical, numerical and experimental investigation. Oil & gas science and technology, 57(1), p. 59-69.

Lemire, S., Vo, H. D. & Benner, M. W. (2009). Performance improvement of axial compressors and fans with plasma actuation. International Journal of Rotating Machinery, 2009, p. 1-13.

Mahmud, A., Mayer, R. & Baron, L. (2015). Modeling of Laterally Sliding Motion of a Magnetic Clamp. Advances in Acoustics and Vibration, 2015.

Malouin, B., Trépanier, J.-Y. & Gariépy, M. (2013). Interpolation of Transonic Flows Using a Proper Orthogonal Decomposition Method. International Journal of Aerospace Engineering, 2013, p. 1-11.

Marcotte, B. & Bernier, M. (2019). Experimental validation of a TRC model for a double U-tube borehole with two independent circuits. Applied Thermal Engineering, 162, p. 1-34.

Masson, C., Ammara, I. & Paraschivoiu, I. (1997). An aerodynamic method for the analysis of isolated horizontal-axis wind turbines. International Journal of Rotating Machinery, 3(1), p. 21-32.

Masson, C., Leclerc, C. & Paraschivoiu, I. (1998). Appropriate dynamic-stall models for performance predictions of VAWTs with NLF blades. International Journal of Rotating Machinery, 4(2), p. 129-139.

Mehdi, D. & Boukas, E.-K. (2003). Stability and stabilizability of dynamical systems with multiple time-varying delays: delay-dependent criteria. Mathematical Problems in Engineering, 2003(4), p. 137-152.

Mehdi Zadeh, F., Trépanier, J.-Y. & Petro, E. (2013). Development and Validation of a New Boundary Condition for Intake Analysis with Distortion. International Journal of Aerospace Engineering, 2013, p. 1-12.

Michaud, M., Milan, P. & Vo, H. D. (2016). Low-Cost Rotating Experimentation in Compressor Aerodynamics Using Rapid Prototyping. International Journal of Rotating Machinery, 2016.

Périé-Curnier, D. & Curnier, D. (2010). Effect of pathology type and severity on the distribution of MRI signal intensities within the degenerated nucleus pulposus: application to idiopathic scoliosis and spondylolisthesis. BMC Musculoskeletal Disorders, 11.

Périé-Curnier, D., Dahdah, N., Foudis, A. & Curnier, D. (2013). Multi-parametric MRI as an indirect evaluation tool of the mechanical properties of in-vitro cardiac tissues. BMC Cardiovascular Disorders, 13.

Rahman, M. M. & Mayer, R. (2016). Measurement Accuracy Investigation of Touch Trigger Probe with Five-Axis Machine Tools. Archive of Mechanical Engineering, 63(4), p. 495-510.

Recuerda, M., Périé-Curnier, D., Gilbert, G. & Beaudoin, G. (2012). Assessment of mechanical properties of isolated bovine intervertebral discs from multi-parametric magnetic resonance imaging. BMC Musculoskeletal Disorders, 13.

Rostamzadeh, R., Sabaghi, M. & Esmaili, A. (2013). Evaluation of cost-effectiveness criteria in supply chain management : case study. Advances in Decision Sciences, 2013.

Salem, O., Wang, H., Alaseem, A. M., Ciobanu, O., Hadjab, I., Gawri, R., ... Mwale, F. (2014). Naproxen affects osteogenesis of human mesenchymal stem cells via regulation of Indian hedgehog signaling molecules. Arthritis Research and Therapy, 16.

Stip, E., Lungu, O. V., Anselmo, K., Letourneau, G., Mendrek, A., Stip, B., ... Bentaleb, L. A. (2012). Neural changes associated with appetite information processing in schizophrenic patients after 16 weeks of olanzapine treatment. Translational Psychiatry, 2(6).

Villalpando, F., Reggio, M. & Ilinca, A. (2011). Assessment of turbulence models for flow simulation around a wind turbine airfoil. Modelling and Simulation in Engineering, 2011, p. 1-8.

Vo, H. D. (2007). Active suppression of rotating stall inception with distributed jet actuation. International Journal of Rotating Machinery, 2007, p. 1-16.

Wang, X., Larson, A. N., Crandall, D. G., Parent, S., Labelle, H., Ledonio, C. G. T. & Aubin, C.-É. (2017). Biomechanical effect of pedicle screw distribution in AIS instrumentation using a segmental translation technique: computer modeling and simulation. Scoliosis and Spinal Disorders, 12.

Xing, K., Mayer, R. & Achiche, S. (2018). Machine tool volumetric error features extraction and classification using principal component analysis and K-means. Journal of Manufacturing and Materials Processing, 2(3).

Département de génie physique

Abadias, G., Chason, E., Keckes, J., Sebastiani, M., Thompson, G. B., Barthel, E., ... Martinu, L. (2018). Stress in thin films and coatings: current status, challenges, and prospects. Journal of Vacuum Science & Technology A, 36(2).

Andriessen, E. M.M.A., Wilson, A. M., Mawambo, G., Dejda, A., Miloudi, K., Sennlaub, F. & Sapieha, P. (2016). Gut microbiota influences pathological angiogenesis in obesity‐driven choroidal neovascularization. EMBO Molecular Medicine, 8(12), p. 1366.

Beaulieu, E., Laurence, A., Birlea, M., Sheehy, G., Angulo-Rodriguez, L., Latour, M., ... Leblond, F. (2020). Wide-field optical spectroscopy system integrating reflectance and spatial frequency domain imaging to measure attenuation-corrected intrinsic tissue fluorescence in radical prostatectomy specimens. Biomedical Optics Express, 11(4), p. 2052-2072.

Berlín, G., Brassard, G., Bussières, F., Godbout, N., Slater, J. A. & Tittel, W. (2011). Experimental loss-tolerant quantum coin flipping. Nature Communications, 2.

Bostani, A., Tehranchi, A. & Kashyap, R. (2017). Super-tunable, broadband up-conversion of a high-power CW laser in an engineered nonlinear crystal. Scientific Reports, 7.

Brunet, A. R., Labelle, F., Wong, P. & Gervais, T. (2017). Reconfigurable microfluidic magnetic valve arrays: towards a radiotherapy-compatible spheroid culture platform for the combinatorial screening of cancer therapies. Sensors, 17(10).

Dallaire, F., Picot, F., Tremblay, J.-P., Sheehy, G., Lemoine, É., Agarwal, R., ... Leblond, F. (2020). Quantitative spectral quality assessment technique validated using intraoperative in vivo Raman spectroscopy measurements. Journal of Biomedical Optics, 25(4).

Elhadi, A., Bouchoucha, A., Jomaa, W., Zedan, Y., Schmitt, T. & Bocher, P. (2016). Study of surface wear and damage induced by dry sliding of tempered AISI 4140 steel against hardened AISI 1055 steel. Tribology in Industry, 38(4), p. 475-485.

Ghali, H., Bianucci, P. & Peter, Y.-A. (2017). Wavelength shift in a whispering gallery microdisk due to bacterial sensing: a theoretical approach. Sensing and Bio-Sensing Research, 13, p. 9-16.

Ghane Motlagh, B., Choueib, M., Hajhosseini Mesgar, A., Hasanuzzaman, M. & Sawan, M. (2016). Direct growth of carbon nanotubes on new high-density 3D pyramid-shaped microelectrode arrays for brain-machine interfaces. Micromachines, 7(9), p. 1-17.

Iezzi, V. L., Büttner, T. F. S., Tehranchi, A., Loranger, S., Kabakova, I. V., Eggleton, B. J. & Kashyap, R. (2016). Temporal characterization of a multi-wavelength Brillouin–erbium fiber laser. New Journal of Physics, 18(5), p. 1-11.

Jacobberger, R. M., Kiraly, B., Fortin-Deschenes, M., Levesque, P. L., McElhinny, K. M., Brady, G. J., ... Arnold, M. S. (2015). Direct oriented growth of armchair graphene nanoribbons on germanium. Nature Communications, 6.

Kasparek, E., Tavares, J. R., Wertheimer, M. R. & Girard-Lauriault, P.-L. (2018). VUV Photodeposition of Thiol-Terminated Films: A Wavelength-Dependent Study. Langmuir, 34(41), p. 12234-12243.

Kasparek, E., Thiry, D., Tavares, J. R., Wertheimer, M. R., Snyders, R. & Girard-Lauriault, P.-L. (2018). Growth mechanisms of sulfur-rich plasma polymers: Binary gas mixtures versus single precursor. Plasma Processes and Polymers, 15(7), p. 1800036.

Krishnaiah, K. V., Soares de Lima Filho, E., Ledemi, Y., Nemova, G., Messaddeq, Y. & Kashyap, R. (2016). Development of ytterbium-doped oxyfluoride glasses for laser cooling applications. Scientific Reports, 6, p. 1-12.

Lapointe, J. & Kashyap, R. (2017). A simple technique to overcome self-focusing, filamentation, supercontinuum generation, aberrations, depth dependence and waveguide interface roughness using fs laser processing. Scientific Reports, 7.

Lavoie-Cardinal, F., Salesse, C., Bergeron, É., Meunier, M. & De Koninck, P. (2016). Gold nanoparticle-assisted all optical localized stimulation and monitoring of Ca2+ signaling in neurons. Scientific Reports, 6, p. 1-9.

Leblanc-Hotte, A., Chabot-Roy, G., Odagiu, L., Richaud, M., Lesage, S., Delisle, J.-S. & Peter, Y.-A. (2018). High-throughput refractive index-based microphotonic sensor for enhanced cellular discrimination. Sensors and Actuators B: Chemical, 266, p. 255-262.

Machado, R. R. P., Soares de Lima Filho, E., Dutra, R. C., Barbosa Raposo, N. R., Duarte, R. S., Soares, G. L. G., ... Kaplan, M. A. C. (2012). Metabolic Activity Interferometer: A Powerful Tool for Testing Antibiotics. Journal of Sensors, 2012, p. 1-7.

Mireles, L.-K., Sacher, E., Yahia, L., Laurent, S. & Stanicki, D. (2016). Washing effect on superparamagnetic iron oxide nanoparticles. Data in Brief, 7, p. 1296-1301.

Mwale, F., Wang, H., Petit, A., Girard-Lauriault, P.-L., Hunter, C. J., Ouellet, J. A., ... Antoniou, J. (2007). The effect of novel nitrogen-rich plasma polymer coatings on the phenotypic profile of notochordal cells. BioMedical Engineering OnLine, 6, p. 33.

Nemova, G. & Kashyap, R. (2016). Silica bottle resonator sensor for refractive index and temperature measurements. Sensors, 16(1), p. 1-9.

Petit, A., Demers, C. N., Girard-Lauriault, P.-L., Stachura, D., Wertheimer, M. R., Antoniou, J. & Mwale, F. (2011). Effect of nitrogen-rich cell culture surfaces on type X collagen expression by bovine growth plate chondrocytes. BioMedical Engineering OnLine, 10(4).

Roa Gonzalez, I. R., Lima, B. C., Pincheira, P. I.R., Brum, A. A., Macêdo, A. M.S., Vasconcelos, G. L., ... Kashyap, R. (2017). Turbulence hierarchy in a random fibre laser. Nature Communications, 8, p. 1-8.

Rousset, N., Monet, F. & Gervais, T. (2017). Simulation-assisted design of microfluidic sample traps for optimal trapping and culture of non-adherent single cells, tissues, and spheroids. Scientific Reports, 7.

Safavieh, M., Qasaimeh, M. A., Vakil, A., Juncker, D. & Gervais, T. (2015). Two-Aperture Microfluidic Probes as Flow Dipoles: Theory and Applications. Scientific Reports, 5.

Shirazi, A. H., Namaki, A., Roohi, A. A. & Jafari, G. R. (2013). Transparency effect in the emergence of monopolies in social networks. Journal of Artificial Societies and Social Simulation, 16(1), p. 1-8.

Skorobogatiy, M. (2009). Microstructured and photonic bandgap fibers for applications in the resonant bio- and chemical sensors. Journal of Sensors, 2009, p. 1-20.

Stone, A., Jain, H., Dierolf, V., Sakakura, M., Shimotsuma, Y., Miura, K., ... Kashyap, R. (2015). Direct laser-writing of ferroelectric single-crystal waveguide architectures in glass for 3D integrated optics. Scientific Reports, 5.

Tarun, A., Hayazawa, N., Balois, M. V., Kawata, S., Reiche, M. & Moutanabbir, O. (2013). Stress redistribution in individual ultrathin strained silicon nanowires: a high-resolution polarized Raman study. New Journal of Physics, 15(5).

Département de génie électrique

Abd Elaal, M. & Ghannouchi, F. (2007). A2×1LINC transceiver for enhanced power transmission in wireless systems. Research Letters in Communications, 2007, p. 1-4.

Abobakr, S. A., Sadid, W. H. & Zhu, G. (2018). Game-theoretic decentralized model predictive control of thermal appliances in discrete-event systems framework. IEEE Transactions on Industrial Electronics, 65(8), p. 6446-6456.

Abou-Abbas, L., Tadj, C., Gargour, C. & Montazeri, L. (2017). Expiratory and inspiratory cries detection using different signals' decomposition techniques. Journal of Voice, 31(2), 259.E13-259.E28.

Achouri, K. & Caloz, C. (2018). Design, concepts, and applications of electromagnetic metasurfaces. Nanophotonics, 7(6), p. 1095-1116.

Amiri, M., Pouliot, P., Bonnéry, C., Leclerc, P.-O., Desjardins, M., Lesage, F. & Joanette, Y. (2014). An exploration of the effect of hemodynamic changes due to normal aging on the fNIRS response to semantic processing of words. Frontiers in Neurology, 5.

Arab, H., Dufour, S., Moldovan, E., Akyel, C. & Tatu, S. O. (2018). A 77-GHz six-port sensor for accurate near-field displacement and Doppler measurements. Sensors, 18(8), p. 1-19.

Azarfar, A., Frigon, J.-F. & Sansò, B. (2014). Priority queueing models for cognitive radio networks with traffic differentiation. EURASIP Journal on Wireless Communications and Networking, 2014.

Benzerrouk, H., Nebylov, A. & Li, M. (2018). Multi-UAV Doppler information fusion for target tracking based on distributed high degrees information filters. Aerospace, 5(1), p. 1-21.

Borowczyk, A., Nguyen, D.-T., Nguyen, A. P.-V., Nguyen, D. Q., Saussié, D. & Le Ny, J. (2017). Autonomous landing of a quadcopter on a high-speed ground vehicle. Journal of Guidance, Control, and Dynamics, 40(9), p. 2378-2385.

Bostani, A., Tehranchi, A. & Kashyap, R. (2017). Super-tunable, broadband up-conversion of a high-power CW laser in an engineered nonlinear crystal. Scientific Reports, 7.

Boucher, P., Atrash, A., Kelouwani, S., Honoré, W., Nguyen, H., Villemure, J., ... Pineau, J. (2013). Design and validation of an intelligent wheelchair towards a clinically-functional outcome. Journal of NeuroEngineering and Rehabilitation, 10.

Boutayeb, H. & Nedil, M. (2016). High gain slot array with Fabry-Perot cavity feeding circuit. International Journal of Antennas and Propagation, 2016, p. 1-5.

Caloz, C. (2009). Perspectives on EM metamaterials. Materials Today, 12(3), p. 12-20.

Castonguay, A., Thomas, S., Lesage, F. & Casanova, C. (2014). Repetitive and Retinotopically Restricted Activation of the Dorsal Lateral Geniculate Nucleus with Optogenetics. PloS One, 9(4).

Chyu, M.-C., Austin, T., Calisir, F., Chanjaplammootil, S., Davis, M. J., Favela, J., ... Zhang, Y.-T. (2015). Healthcare Engineering Defined: A White Paper. Journal of Healthcare Engineering, 6(4), p. 635-648.

Corinthios, M. J. (2016). Chrestenson transform FPGA embedded factorizations. SpringerPlus, 5(1), p. 1-23.

Delcroix, B., Le Ny, J., Bernier, M., Azam, M., Qu, B. & Venne, J.-S. (2020). Autoregressive neural networks with exogenous variables for indoor temperature prediction in buildings. Building Simulation.

Diaz-Bolado, A., Laurin, J.-J. & Barriere, P.-A. (2013). Study of microwave tomography measurement setup configurations for breast cancer detection based on breast compression. International Journal of Antennas and Propagation, 2013, p. 1-12.

Dupuy, O., Gauthier, C. J., Fraser, S. A., Desjardins-Crépeau, L., Desjardins, M., Mekary, S., ... Bherer, L. (2015). Higher levels of cardiovascular fitness are associated with better executive function and prefrontal oxygenation in younger and older women. Frontiers in Human Neuroscience, 9.

El Mendili, M.-M., Cohen-Adad, J., Pelegrini-Issac, M., Rossignol, S., Morizot-Koutlidis, R., Marchand-Pauvert, V., ... Pradat, P.-F. (2014). Multi-Parametric Spinal Cord MRI as Potential Progression Marker in Amyotrophic Lateral Sclerosis. PloS One, 9(4).

Fraser, S. A., Dupuy, O., Pouliot, P., Lesage, F. & Bherer, L. (2016). Comparable cerebral oxygenation patterns in younger and older adults during dual-task walking with increasing load. Frontiers in Aging Neuroscience, 8, p. 1-9.

Ghane Motlagh, B., Choueib, M., Hajhosseini Mesgar, A., Hasanuzzaman, M. & Sawan, M. (2016). Direct growth of carbon nanotubes on new high-density 3D pyramid-shaped microelectrode arrays for brain-machine interfaces. Micromachines, 7(9), p. 1-17.

Guevara, E., Berti, R., Londono, I., Xie, N., Bellec, P., Lesage, F. & Lodygensky, G. A. (2013). Imaging of an inflammatory injury in the newborn rat brain with photoacoustic tomography. PloS One, 8(12).

Hou, Y., Liu, J. R., Buchanan, M., Thorpe, A. J. S., Poole, P. J., Liu, H. C., ... Zhang, X. P. (2012). Terahertz Generation Using Implanted InGaAs Photomixers and Multi-wavelength Quantum Dot Lasers. Nano-Micro Letters, 4(1), p. 10-13.

Iezzi, V. L., Büttner, T. F. S., Tehranchi, A., Loranger, S., Kabakova, I. V., Eggleton, B. J. & Kashyap, R. (2016). Temporal characterization of a multi-wavelength Brillouin–erbium fiber laser. New Journal of Physics, 18(5), p. 1-11.

Jimenez-Triana, A., Zhu, G. & Saydy, L. (2014). Output-Feedback Control of a Chaotic MEMS Resonator for Oscillation Amplitude Enhancement. Mathematical Problems in Engineering, 2014, p. 1-13.

Kairy, D., Rushton, P., Archambault, P., Pituch, E., Torkia, C., El Fathi, A., ... Gourdeau, R. (2014). Exploring Powered Wheelchair Users and Their Caregivers’ Perspectives on Potential Intelligent Power Wheelchair Use: A Qualitative Study. International Journal of Environmental Research and Public Health, 11(2).

Kassem, A., Sawan, M., Boukadoum, M. & Haidar, A. (2005). Perception SoC based on an ultrasonic array of sensors : efficient DSP core implementation and subsequent experimental results. EURASIP Journal on Advances in Signal Processing, 2005(7), p. 1071-1081.

Khaddaj Mallat, N., Moldovan, E., Wu, K. & Tatu, S.O. (2009). Millimeter-Wave Ultra-Wideband Six-Port Receiver Using Cross-Polarized Antennas. EURASIP Journal on Wireless Communications and Networking, 2009(1), p. 508678.

Krishnaiah, K. V., Soares de Lima Filho, E., Ledemi, Y., Nemova, G., Messaddeq, Y. & Kashyap, R. (2016). Development of ytterbium-doped oxyfluoride glasses for laser cooling applications. Scientific Reports, 6, p. 1-12.

Krouchev, N. I., Danner, S. M., Vinet, A., Rattay, F. & Sawan, M. (2014). Energy-Optimal Electrical-Stimulation Pulses Shaped by the Least-Action Principle. PloS One, 9(3).

Krouchev, N. I., Rattay, F., Sawan, M. & Vinet, A. (2015). From Squid to Mammals with the HH Model through the Nav Channels’ Half-Activation-Voltage Parameter. PloS One, 10(12).

Lam, T., Avti, P. K., Pouliot, P., Maafi, F., Tardif, J.-C., Rhéaume, É., ... Kakkar, A. (2016). Fabricating water dispersible superparamagnetic iron oxide nanoparticles for biomedical applications through ligand exchange and direct conjugation. Nanomaterials, 6(6), p. 1-15.

Lapointe, J. & Kashyap, R. (2017). A simple technique to overcome self-focusing, filamentation, supercontinuum generation, aberrations, depth dependence and waveguide interface roughness using fs laser processing. Scientific Reports, 7.

Le Ny, J. & Mohammady, M. (2018). Differentially private MIMO filtering for event streams. IEEE Transactions on Automatic Control, 63(1), p. 144-157.

Lebel, K., Duval, C., Nguyen, H. P., Plamondon, R. & Boissy, P. (2018). Cranio-caudal kinematic turn signature assessed with inertial systems as a marker of mobility deficits in Parkinson's disease. Frontiers in Neurology, 9.

Lebel, K., Nguyen, H., Duval, C., Plamondon, R. & Boissy, P. (2017). Capturing the Cranio-Caudal Signature of a Turn with Inertial Measurement Systems: Methods, Parameters Robustness and Reliability. Frontiers in Bioengineering and Biotechnology, 5.

Lhachemi, H., Saussié, D. & Zhu, G. (2019). Boundary Control of a Nonhomogeneous Flexible Wing with Bounded Input Disturbances. IEEE Transactions on Automatic Control, 64(2), p. 854-861.

Lhachemi, H., Saussié, D. & Zhu, G. (2017). An Extension of Lyapunov’s First Method to Nonlinear Systems With Non-Continuously Differentiable Vector Fields. IEEE Control Systems Letters, 1(1), p. 74-79.

Li, M., Zhu, G., Savaria, Y. & Lauer, M. (2017). Reliability Enhancement of Redundancy Management in AFDX Networks. IEEE Transactions on Industrial Informatics, 13(5), p. 2118-2129.

Loranger, S., Gagné, M., Lambin-Iezzi, V. & Kashyap, R. (2015). Rayleigh scatter based order of magnitude increase in distributed temperature and strain sensing by simple UV exposure of optical fibre. Scientific Reports, 5.

Martin, A. R., Aleksanderek, I., Cohen-Adad, J., Tarmohamed, Z., Tetreault, L., Smith, N., ... Fehlings, M. G. (2015). Translating state-of-the-art spinal cord MRI techniques to clinical use: A systematic review of clinical studies utilizing DTI, MT, MWF, MRS, and fMRI. NeuroImage - Clinical, 10.

Miled, M., Gagne, A. & Sawan, M. (2013). Hybrid modeling method for a DEP based particle manipulation. Sensors, 13(2).

Mirzaei, M. & Sawan, M. (2014). Microelectronics-Based Biosensors Dedicated to the Detection of Neurotransmitters: A Review. Sensors, 14(10).

Nadeau, A., Lungu, O., Bore, A., Plamondon, R., Duchesne, C., Robillard, M.-È., ... Doyon, J. (2018). A 12-week cycling training regimen improves upper limb functions in people with Parkinson's disease. Frontiers in Human Neuroscience, 12.

Nadeau, A., Lungu, O., Duchesne, C., Robillard, M.-È., Bore, A., Bobeuf, F., ... Doyon, J. (2017). A 12-week cycling training regimen improves gait and executive functions concomitantly in people with Parkinson’s disease. Frontiers in Human Neuroscience, 10, p. 1-10.

Nemova, G. & Kashyap, R. (2016). Silica bottle resonator sensor for refractive index and temperature measurements. Sensors, 16(1), p. 1-9.

O'Reilly, C., Plamondon, R. & Lebrun, L.-H. (2014). Linking brain stroke risk factors to human movement features for the development of preventive tools. Frontiers in Aging Neuroscience.

Perea-Vega, D., Girard, A. & Frigon, J.-F. (2013). Dual-based bounds for resource allocation in zero-forcing beamforming OFDMA-SDMA systems. EURASIP Journal on Wireless Communications and Networking, 2013.

Plamondon, R. (2018). General relativity: an erfc metric. Results in Physics, 9, p. 456-462.

Plamondon, R., O'Reilly, C., Rémi, C. & Duval, T. (2013). The lognormal handwriter: learning, performing, and declining. Frontiers in Psychology, 4.

Rajagopalan, S., Sawan, M., Ghafar-Zadeh, E., Savadogo, O. & Chodavarapu, V. (2008). A Polypyrrole-based Strain Sensor Dedicated to Measure Bladder Volume in Patients with Urinary Dysfunction. Sensors, 8(8).

Roa Gonzalez, I. R., Lima, B. C., Pincheira, P. I.R., Brum, A. A., Macêdo, A. M.S., Vasconcelos, G. L., ... Kashyap, R. (2017). Turbulence hierarchy in a random fibre laser. Nature Communications, 8, p. 1-8.

Sadid, W. H., Abobakr, S. A. & Zhu, G. (2017). Discrete-Event Systems-Based Power Admission Control of Thermal Appliances in Smart Buildings. IEEE Transactions on Smart Grid, 8(6), p. 2665-2674.

Safi, D., Béland, R., Nguyen, D. K., Pouliot, P., Mohamed, I. S., Vannasing, P., ... Gallagher, A. (2016). Recruitment of the left precentral gyrus in reading epilepsy: A multimodal neuroimaging study. Epilepsy & Behavior Case Reports, 5, p. 19-22.

Salam, M., Sawan, M. & Nguyen, D. (2010). Low-Power Implantable Device for Onset Detection and Subsequent Treatment of Epileptic Seizures: A Review. Journal of Healthcare Engineering, 1(2), p. 169-184.

Salam, M. T., Gelinas, S., Desgent, S., Duss, S., Bernier Turmel, F., Carmant, L., ... Nguyen, D. K. (2014). Subdural porous and notched mini-grid electrodes for wireless intracranial electroencephalographic recordings. Journal of Multidisciplinary Healthcare, 7, p. 573-586.

Salhab, R., Malhame, R. P. & Le Ny, J. (2018). A dynamic game model of collective choice in multi-agent systems. IEEE Transactions on Automatic Control, 63(3), p. 768-782.

Saliani, A., Perraud, B., Duval, T., Stikov, N., Rossignol, S. & Cohen-Adad, J. (2017). Axon and myelin morphology in animal and human spinal cord. Frontiers in Neuroanatomy, 11.

Srinivasan Ramanagopal, M., Nguyen, A. P.-V. & Le Ny, J. (2018). A motion planning strategy for the active vision-based mapping of ground-level structures. IEEE Transactions on Automation Science and Engineering, 15(1), p. 356-368.

Stikov, N., Campbell, J. S. W., Stroh, T., Lavelee, M., Frey, S., Novek, J., ... Pike, G. B. (2015). Quantitative analysis of the myelin g-ratio from electron microscopy images of the macaque corpus callosum. Data Brief, 4, p. 368-373.

Stone, A., Jain, H., Dierolf, V., Sakakura, M., Shimotsuma, Y., Miura, K., ... Kashyap, R. (2015). Direct laser-writing of ferroelectric single-crystal waveguide architectures in glass for 3D integrated optics. Scientific Reports, 5.

Stroman, P.W., Wheeler-Kingshott, C., Bacon, M., Schwab, J.M., Bosma, R., Brooks, J., ... Tracey, I. (2014). The current state-of-the-art of spinal cord imaging: Methods. NeuroImage, 84, p. 1070.

Tan, S., Soulez, G., Diez Martinez, P., Larrivée, S., Stevens, L.-M., Goussard, Y., ... Chartrand-Lefebvre, C. (2016). Coronary stent artifact reduction with an edge-enhancing reconstruction kernel : a prospective cross-sectional study with 256-slice CT. PLOS ONE, 11(4), e0154292-e0154305.

Tardif, P.-L., Bertrand, M.-J., Abran, M., Castonguay, A., Lefebvre, J., Stähli, B. E., ... Lesage, F. (2016). Validating intravascular imaging with serial optical coherence tomography and confocal fluorescence microscopy. International Journal of Molecular Sciences, 17(12), p. 1-12.

Teixeira, T., Hafyane, T., Stikov, N., Akdeniz, C., Greiser, A. & Friedrich, M. G. (2016). Comparison of different cardiovascular magnetic resonance sequences for native myocardial T1 mapping at 3T. Journal of Cardiovascular Magnetic Resonance, 18, p. 1-12.

Tokuda, T., Ishizu, T., Nattakarn, W., Haruta, M., Noda, T., Sasagawa, K., ... Ohta, J. (2018). 1 mm3-sized optical neural stimulator based on CMOS integrated photovoltaic power receiver. AIP Advances, 8(4).

Vahdat, S., Lungu, O., Cohen-Adad, J., Marchand-Pauvert, V., Benali, H. & Doyon, J. (2015). Simultaneous Brain–Cervical Cord fMRI Reveals Intrinsic Spinal Cord Plasticity during Motor Sequence Learning. PLoS Biology, 13(6).

Wang, K., Laurin, J.-J., Zhang, Q., Zhang, Q. & Wu, K. (2020). Three-dimensional scattering from uniaxial objects with a smooth boundary using a multiple infinitesimal dipole method. IEEE Access, 8, p. 80842-80854.

Yahyaoui, A., Rmili, H., Achouri, K., Sheikh, M., Dobaie, A., Affandi, A. & Aguili, T. (2017). Transmission control of electromagnetic waves by using quarter-wave plate and half-wave plate all-dielectric metasurfaces based on elliptic dielectric resonators. International Journal of Antennas and Propagation, 2017.

Yang, K., Li, M., Zhu, G. & Savaria, Y. (2017). A DAQM-Based Load Balancing Scheme for High Performance Computing Platforms. IEEE Access, 5, p. 22504-22513.

Yiannakas, M. C., Mustafa, A. M., De Leener, B., Kearney, H., Tur, C., Altmann, D. R., ... Gandini Wheeler-Kingshott, C. A.M. (2015). Fully automated segmentation of the cervical cord from T1-weighted MRI using PropSeg: Application to multiple sclerosis. NeuroImage - Clinical, 10.

Zalzal, V., Gava, R., Kelouwani, S. & Cohen, P. (2009). Acropolis: A Fast Protoyping Robotic Application. International Journal of Advanced Robotic Systems, 6(1), p. 8.

Zhang, C., Bélanger, S., Pouliot, P. & Lesage, F. (2015). Measurement of Local Partial Pressure of Oxygen in the Brain Tissue under Normoxia and Epilepsy with Phosphorescence Lifetime Microscopy. PloS One, 10(8).

Zhang, Q., Wong, S. W., Jin, C., Zhang, X. Y., Chen, Y., Sounas, D. & Chamanara, N. (2015). LTE Technology: Antenna, RF Front-Ends, and Channel Modeling. International Journal of Antennas and Propagation, 2015.

Zhang, Y., Jin, Y., Yao, J., Zhu, G. & Wen, B. (2017). Power peak shaving with data transmission delays for thermal management in smart buildings. IEEE Transactions on Industrial Informatics.

Zhang, Z. H., Bai, L., Hu, C. M., Hemour, S., Wu, K., Fan, X. L., ... Houssameddine, D. (2015). The tunneling magnetoresistance current dependence on cross sectional area, angle and temperature. AIP Advances, 5(3).

Zheng, J. & Zhu, G. (2019). A De Giorgi Iteration-based Approach for the Establishment of ISS Properties for Burgers' Equation with Boundary and In-domain Disturbances. IEEE Transactions on Automatic Control, 64(8).

Zheng, J. & Zhu, G. (2015). In-Domain Control of a Heat Equation: An Approach Combining Zero-Dynamics Inverse and Differential Flatness. Mathematical Problems in Engineering, 2015, p. 1-10.

Département de mathématiques et de génie industriel

Abrignani, M. D., Giupponi, L., Lodi, A. & Verdone, R. (2018). Scheduling M2M traffic over LTE uplink of a dense small cell network. EURASIP Journal on Wireless Communications and Networking, 2018(1).

Adegbindin, M., Hertz, A. & Bellaïche, M. (2016). A new efficient RLF-like algorithm for the vertex coloring problem. Yugoslav Journal of Operations Research, 26(4), p. 441-456.

Al Salman, J.M., Hani, S., de Marcellis-Warin, N. & Isa, S. F. (2015). Effectiveness of an electronic hand hygiene monitoring system on healthcare workers' compliance to guidelines. Journal of Infection and Public Health, 8(2), p. 117-126.

Appio, F. P., Achiche, S., Martini, A. & Beaudry, C. (2017). On designers’ use of biomimicry tools during the new product development process: an empirical investigation. Technology Analysis & Strategic Management, p. 1-15.

Arab, H., Dufour, S., Moldovan, E., Akyel, C. & Tatu, S. O. (2018). A 77-GHz six-port sensor for accurate near-field displacement and Doppler measurements. Sensors, 18(8), p. 1-19.

Armellini, F., Kaminski, P. C. & Beaudry, C. (2014). The Open Innovation Journey in Emerging Economies: An Analysis of the Brazilian Aerospace Industry. Journal of Aerospace Technology and Management, 6(4), p. 462-474.

Barirani, A., Agard, B. & Beaudry, C. (2013). Competence maps using agglomerative hierarchical clustering. Journal of Intelligent Manufacturing, 24(2), p. 373-384.

Barirani, A., Agard, B. & Beaudry, C. (2013). Discovering and assessing fields of expertise in nanomedicine: a patent co-citation network perspective. Scientometrics, 94(3), p. 1111-1136.

Barirani, A., Beaudry, C. & Agard, B. (2015). Distant recombination and the creation of basic inventions: An analysis of the diffusion of public and private sector nanotechnology patents in Canada. Technovation, 36-37, p. 39-52.

Bassis, N. F. & Armellini, F. (2018). Systems of innovation and innovation ecosystems: a literature review in search of complementarities. Journal of Evolutionary Economics, 28(5), p. 1053-1080.

Beaudry, C. (2014). Impact of collaboration and funding on the propensity to patent of Canadian biotechnology firms 1999-2005. International Journal of Biotechnology, 13(1/2/3), p. 22-52.

Beaudry, C. & Allaoui, S. (2012). Impact of public and private research funding on scientific production: The case of nanotechnology. Research Policy, 41(9), p. 1589-1606.

Beaudry, C. & Kananian, R. (2013). Follow the (Industry) Money: The Impact of Science Networks and Industry-to-University Contracts on Academic Patenting in Nanotechnology and Biotechnology. Industry & Innovation, 20(3), p. 241-260.

Beaudry, C. & Schiffauerova, A. (2011). Impacts of collaboration and network indicators on patent quality: The case of Canadian nanotechnology innovation. European Management Journal, 29(5), p. 362-376.

Beaudry, C. & Schiffauerova, A. (2011). Is Canadian intellectual property leaving Canada? A study of nanotechnology patenting. The Journal of Technology Transfer, 36(6), p. 665-679.

Beaudry, C. & Schiffauerova, A. (2009). Who's right, Marshall or Jacobs? The localization versus urbanization debate. Research Policy, 38(2), p. 318-337.

Beaudry, C. & Swann, G. M. P. (2009). Firm growth in industrial clusters of the United Kingdom. Small Business Economics, 32(4), p. 409-424.

Bendavid, Y., Castro, L., Lefebvre, L. A. & Lefebvre, É. (2006). Explorando los impactos de la RFID en los procesos de negocios de una cadena de suministro. Journal of Technology Management & Innovation, 1(4), p. 30-42.

Brunet, C., Savadogo, O., Baptiste, P. & Bouchard, M. A. (2018). Shedding some light on photovoltaic solar energy in Africa – A literature review. Renewable and Sustainable Energy Reviews, 96, p. 325-342.

Castro, L. & Fosso Wamba, S. (2007). An inside look at RFID technology. Journal of Technology Management & Innovation, 2(1), p. 128-141.

Dahlby, B., Feehan, J., Ferede, E. & Joanis, M. (2014). Four Studies on the Canadian Equalization System. SPP Communiqués, 6.

Devaraj, V., Lopez, L. F., Beaman, J. J. & Prudhomme, S. (2015). Model-Based Control of a Continuous Coating Line for Proton Exchange Membrane Fuel Cell Electrode Assembly. International Journal of Chemical Engineering, 2015.

El Khalil, A., El Manouni, S. & Ouanan, M. (2005). Simplicity and stability of the first eigenvalue of a nonlinear elliptic system. International Journal of Mathematics and Mathematical Sciences, 2005(10), p. 1555-1563.

Farnia, F., Frayret, J.-M., Beaudry, C. & Lebel, L. (2015). Time-based combinatorial auction for timber allocation and delivery coordination. Forest Policy and Economics, 50, p. 143-152.

Farnia, F., Frayret, J.-M., LeBel, L. & Beaudry, C. (2013). Multiple-round timber auction design and simulation. International Journal of Production Economics, 146(1), p. 129-141.

Fosso Wamba, S., Lefebvre, L. A. & Lefebvre, E. (2007). Integrating RFID technology and EPC network into a B2B retail supply chain: a step toward intelligent business processes. Journal of Technology Management & Innovation, 2(2), p. 114-124.

Gertz, E., Hiekkalinna, T., Le Digabel, S., Audet, C., Terwilliger, J. D. & Schäffer, A. A. (2014). PSEUDOMARKER 2.0: efficient computation of likelihoods using NOMAD. BMC Bioinformatics, 15.

Hertz, A., Marcotte, O. & Schindl, D. (2014). On the maximum orders of an induced forest, an induced tree, and a stable set. Yugoslav Journal of Operations Research, 24(2), p. 199-215.

Hertz, A. & Ries, B. (2014). A note on r-equitable k-colorings of trees. Yugoslav Journal of Operations Research, 24(2), p. 293-298.

Joanis, M. (2014). The politics of chequebook federalism: can electoral considerations affect federal-provincial transfers? SPP Research Papers, 7(25).

Labelle, A. & Frayret, J.-M. (2018). Agent-based model for end-of-life product flow analysis. Resources, 7(3), p. 1-20.

Lefebvre, M. (2005). A filtered renewal process as a model for a river flow. Mathematical Problems in Engineering, 2005(1), p. 49-59.

Lefebvre, M. (2011). LQG homing in a finite time interval. Journal of Control Science and Engineering, 2011, p. 1-3.

Lefebvre, M. (2011). Maximizing the mean exit time of a brownian motion from an interval. International Journal of Stochastic Analysis, 2011, p. 1-5.

Lefebvre, M. (2002). Modeling and forecasting the peak flows of a river. Mathematical Problems in Engineering, 8(6), p. 553-562.

Lefebvre, M. (2016). Optimal and Suboptimal Control of a Standard Brownian Motion. Archives of Control Sciences, 26(3), p. 383-394.

Lefebvre, M. (2011). Similarity solutions of partial differential equations in probability. Journal of Probability and Statistics, 2011, p. 1-13.

Lefebvre, M. (2002). Survival maximization for a Laguerre population. Mathematical Problems in Engineering, 8(6), p. 563-574.

Lefebvre, M. & Bensalma, F. (2014). An application of filtered renewal processes in hydrology. International Journal of Engineering Mathematics, 2014.

Lefebvre, M. & Guilbault, J.-L. (2009). First hitting place probabilities for a discrete version of the Ornstein-Uhlenbeck Process. International Journal of Mathematics and Mathematical Sciences, 2009, p. 1-12.

Lefebvre, M. & Zitouni, F. (2012). General LQG homing problems in one dimension. International Journal of Stochastic Analysis, 2012, p. 1-15.

Lonca, G., Lesage, P., Majeau-Bettez, G., Bernard, S. & Margni, M. (2020). Assessing scaling effects of circular economy strategies: A case study on plastic bottle closed-loop recycling in the USA PET market. Resources, Conservation and Recycling, 162, p. 105013.

Marinova, M., Beaudry, C., Taoussi, A., Trepanier, M. & Paris, J. (2008). Economic Assessment of Rural District Heating by Bio-Steam Supplied by a Paper Mill in Canada. Bulletin of Science, Technology & Society, 28(2), p. 159-173.

Martin, A. & Beaudry, C. (2015). Measuring Collaboration Mechanisms in the Canadian Space Sector. New Space, 3(3), p. 172-178.

Martin, A., Sullivan, P., Beaudry, C., Kuyumjian, R. & Comtois, J.-M. (2012). Space medicine innovation and telehealth concept implementation for medical care during exploration-class missions. Acta Astronautica, 81(1), p. 30-33.

Mhada, F. Z., Ouzineb, M., Pellerin, R. & El Hallaoui, I. (2016). Multilevel hybrid method for optimal buffer sizing and inspection stations positioning. SpringerPlus, 5(1), p. 1-21.

Mirnezami, S. R. & Beaudry, C. (2016). The effect of holding a research chair on scientists’ productivity. Scientometrics, 107(2), p. 399-454.

Mirnezami, S. R., Beaudry, C. & Larivière, V. (2016). What determines researchers’ scientific impact? A case study of Quebec researchers. Science and Public Policy, 43(2), p. 262-274.

Mok, E. & Cheung, B. K. S. (2013). An improved neural network training algorithm for wi-fi fingerprinting positioning. ISPRS International Journal of Geo-Information, 2(3), p. 854-868.

Mongeon, P., Brodeur, C., Beaudry, C. & Larivière, V. (2016). Concentration of research funding leads to decreasing marginal returns. Research Evaluation, 25(4), p. 396-404.

Paredes Valencia, A., Doyen, A., Benoit, S., Margni, M. & Pouliot, Y. (2018). Effect of ultrafiltration of milk prior to fermentation on mass balance and process efficiency in greek-style yogurt manufacture. Foods, 7(9).

Paula Pinheiro, M. A., Jugend, D., Demattê Filho, L. C. & Armellini, F. (2018). Framework proposal for ecodesign integration on product portfolio management. Journal of Cleaner Production, 185, p. 176-186.

Rosenbaum, R. K., Meijer, A., Demou, E., Hellweg, S., Jolliet, O., Lam, N. L., ... McKone, T. E. (2015). Indoor Air Pollutant Exposure for Life Cycle Assessment: Regional Health Impact Factors for Households. Environmental Science & Technology, 49(21), p. 12823-12831.

Rotaba, Z. & Beaudry, C. (2012). How do high, medium, and low tech firms innovate? A system of innovation (SI) approach. International Journal of Innovation and Technology Management, 09(05).

Rotaba, Z. & Beaudry, C. (2009). The renewal and transformation of high, medium and low tech: a comparative approach. International Journal of Technology Marketing, 4(4), p. 292.

Santa-Eulalia, L. A., Halladjian, G., D'Amours, S. & Frayret, J.-M. (2011). Integrated methodological frameworks for modelling agent-based advanced supply chain planning systems: A systematic literature review. Journal of Industrial Engineering and Management, 4(4), p. 624-668.

Schiffauerova, A. & Beaudry, C. (2009). Canadian nanotechnology innovation networks: intra-cluster, inter-cluster and foreign collaboration. Journal of Innovation Economics, 4(2), p. 119.

Schiffauerova, A. & Beaudry, C. (2012). Collaboration spaces in Canadian biotechnology: A search for gatekeepers. Journal of Engineering and Technology Management, 29(2), p. 281-306.

Schiffauerova, A. & Beaudry, C. (2011). Star scientists and their positions in the Canadian biotechnology network. Economics of Innovation and New Technology, 20(4), p. 343-366.

Schiffauerova, A. & Beaudry, C. (2012). Who owns the intellectual property and where? The case of Canadian biotechnology. International Journal of Biotechnology, 12(3), p. 147.

Tahmooresnejad, L. & Beaudry, C. (2015). Does government funding have the same impact on academic publications and patents? The case of nanotechnology in Canada. International Journal of Innovation Management, 19(03).

Tahmooresnejad, L., Beaudry, C. & Schiffauerova, A. (2015). The role of public funding in nanotechnology scientific production: Where Canada stands in comparison to the United States. Scientometrics, 102(1), p. 753-787.

Viau, S., Majeau-Bettez, G., Spreutels, L., Legros, R., Margni, M. & Samson, R. (2020). Substitution modelling in life cycle assessment of municipal solid waste management. Waste Management, 102, p. 795-803.

Zitouni, F. & Lefebvre, M. (2014). Linearization of a matrix riccati equation associated to an optimal control problem. International Journal of Differential Equations, 2014.

Département des génies civil, géologique et des mines

Aboulfadl, K., De Potter, C., Prévost, M. & Sauvé, S. (2010). Time-dependent integrity during storage of natural surface water samples for the trace analysis of pharmaceutical products, feminizing hormones and pesticides. Chemistry Central Journal, 4.

Aceves, M. C. & Fuamba, M. (2016). Methodology for selecting Best Management Practices integrating multiple stakeholders and criteria. Part 1: methodology. Water, 8(2), p. 1-14.

Aceves, M. C. & Fuamba, M. (2016). Methodology for selecting Best Management Practices integrating multiple stakeholders and criteria. Part 2: case study. Water, 8(2), p. 1-19.

AlQasimi, E. & Mahdi, T.-F. (2019). Flooding of the Saguenay region in 1996. Part 1: Modeling River Ha! Ha! flooding. Natural Hazards, 96(1).

AlQasimi, E., Pelletier, P. & Mahdi, T.-F. (2019). Flooding of the Saguenay region in 1996. Part 2: Aux Sables River flood mitigation and environmental impact assessment. Natural Hazards, 96(1), p. 17-32.

Baptiste, N. & Chapuis, R. P. (2015). What maximum permeability can be measured with a monitoring well? Engineering Geology, 184(C), p. 111-118.

Bédard, É., Boppe, I., Kouame, S., Martin, P., Pinsonneault, L., Valiquette, L., ... Prévost, M. (2016). Combination of heat shock and enhanced thermal regime to control the growth of a persistent Legionella pneumophila strain. Pathogens, 5(2).

Bédard, É., Prévost, M. & Déziel, É. (2016). Pseudomonas aeruginosa in premise plumbing of large buildings. MicrobiologyOpen, 5(6), p. 937-956.

Bove, P., Claveau-Mallet, D., Boutet, É., Lida, F. & Comeau, Y. (2018). Development and modelling of a steel slag filter effluent neutralization process with CO₂-enriched air from an upstream bioprocess. Water Research, 129, p. 11-19.

Brosseau, C., Émile, B., Labelle, M.-A., Laflamme, É., Dold, P. L. & Comeau, Y. (2016). Compact secondary treatment train combining a lab-scale moving bed biofilm reactor and enhanced flotation processes. Water Research, 106, p. 571-582.

Brown, A.-C. (2017). Constraints on conceptual and quantitative modeling of early diagenetic sediment-hosted stratiform copper mineralization. Minerals, 7(10).

Brunet, C., Savadogo, O., Baptiste, P. & Bouchard, M. A. (2018). Shedding some light on photovoltaic solar energy in Africa – A literature review. Renewable and Sustainable Energy Reviews, 96, p. 325-342.

Burnet, J.-B., Faraj, T., Cauchie, H.-M., Joaquim-Justo, C., Servais, P., Prévost, M. & Dorner, S. (2017). How does the cladoceran Daphnia pulex affect the fate of Escherichia coli in water? PLoS ONE, 12(2), p. 1-16.

Chazarenc, F., Naylor, S., Comeau, Y., Merlin, G. & Brisson, J. (2010). Modeling the effect of plants and peat on evapotranspiration in constructed wetlands. International Journal of Chemical Engineering, 2010, p. 1-6.

Chiganne, F., Marche, C. & Mahdi, T.-F. (2014). Evaluation of the overflow failure scenario and hydrograph of an embankment dam with a concrete upstream slope protection. Natural Hazards, 71(1), p. 21-39.

Chiganne, F., Marche, C. & Mahdi, T.-F. (2014). Modélisation probabiliste du débit de rupture par submersion d’un barrage en remblai. Canadian Journal of Civil Engineering, 41(8), p. 677-685.

Claveau-Mallet, D., Boutet, É. & Comeau, Y. (2018). Steel slag filter design criteria for phosphorus removal from wastewater in decentralized applications. Water Research, 143, p. 28-37.

Claveau-Mallet, D. & Comeau, Y. (2020). Chemical clogging and evolution of head losses in steel slag filters used for phosphorus removal. Water, 12(6).

Claveau-Mallet, D., Courcelles, B., Pasquier, P. & Comeau, Y. (2017). Numerical simulations with the P-Hydroslag model to predict phosphorus removal by steel slag filters. Water Research, 126, p. 421-432.

Claveau-Mallet, D., Seltani, H. & Comeau, Y. (2020). Phosphorus removal and carbon dioxide capture in a pilot conventional septic system upgraded with a sidestream steel slag filter. Water, 12(1).

Claveau-Mallet, D., Wallace, S. & Comeau, Y. (2012). Model of phosphorus precipitation and crystal formation in Electric Arc Furnace steel slag filters. Environmental Science & Technology, 46(3), p. 1465-1470.

Deshommes, E., Tardif, R., Edwards, M., Sauvé, S. & Prévost, M. (2012). Experimental determination of the oral bioavailability and bioaccessibility of lead particles. Chemistry Central Journal, 6.

Deslauriers, S. & Mahdi, T.-F. (2018). Flood modelling improvement using automatic calibration of two dimensional river software SRH-2D. Natural Hazards, 91(2), p. 697-715.

Dibike, Y., Shakibaeinia, A., Eum, H.-I., Prowse, T. & Droppo, I. (2018). Effects of projected climate on the hydrodynamic and sediment transport regime of the lower Athabasca River in Alberta, Canada. River Research and Applications, 34(5), p. 417-429.

Domingo-Pinillos, J., Senent-Aparicio, J., García-Aróstegui, J. & Baudron, P. (2018). Long term hydrodynamic effects in a semi-arid mediterranean multilayer aquifer: Campo de Cartagena in south-eastern Spain. Water, 10(10), p. 1-21.

Farooq, B., Miller, E. J. & Haider, M. (2013). A multidimensional decisions modeling framework for built space supply. Journal of Transport and Land Use, 6(3).

Fayad, P. B., Zamyadi, A., Broseus, R., Prévost, M. & Sauvé, S. (2013). Degradation of progestagens by oxidation with potassium permanganate in wastewater effluents. Chemistry Central Journal, 7.

Freitas, M., Favre, E., Léger, P. & Pedroso, L. J. (2020). Stability Evaluation of Overtopped Concrete Hydraulic Structures Using Computational Fluid Dynamics. Canadian Journal of Civil Engineering.

Fu, T., Stipancic, J., Zangenehpour, S., Miranda-Moreno, L. & Saunier, N. (2017). Automatic traffic data collection under varying lighting and temperature conditions in multimodal environments: thermal versus visible spectrum video-based systems. Journal of Advanced Transportation, 2017, p. 1-15.

Gagnon-Ouellette, C. & Fuamba, M. (2016). Discussion of "Role of Watershed Geomorphic Characteristics on Flooding in Indiana, United States" by Kuk-Hyun Ahn and Venkatesh Merwade. Journal of Hydrologic Engineering, 21(9), 07016011.

Goulet, J.-A. (2017). Bayesian dynamic linear models for structural health monitoring. Structural Control and Health Monitoring, 24(12), e2035.

Goulet, J.-A., Coutu, S. & Smith, I. F.C. (2013). Model falsification diagnosis and sensor placement for leak detection in pressurized pipe networks. Advanced Engineering Informatics, 27(2), p. 261-269.

Goulet, J.-A., Kiureghian, A. D. & Li, B. (2015). Pre-posterior optimization of sequence of measurement and intervention actions under structural reliability constraint. Structural Safety, 52, p. 1-9.

Goulet, J.-A. & Koo, K. (2018). Empirical validation of bayesian dynamic linear models in the context of structural health monitoring. Journal of Bridge Engineering, 23(2), p. 1-15.

Goulet, J.-A., Kripakaran, P. & Smith, I. F. C. (2010). Multimodel structural performance monitoring. Journal of Structural Engineering, 136(10), p. 1309-1318.

Goulet, J.-A., Michel, C. & Kiureghian, A. D. (2015). Data-driven post-earthquake rapid structural safety assessment. Earthquake Engineering & Structural Dynamics, 44(4), p. 549-562.

Goulet, J.-A., Michel, C. & Smith, I. F.C. (2013). Hybrid probabilities and error-domain structural identification using ambient vibration monitoring. Mechanical Systems and Signal Processing, 37(1-2), p. 199-212.

Goulet, J.-A. & Smith, I. F. C. (2013). Performance-driven measurement system design for structural identification. Journal of Computing in Civil Engineering, 27(4), p. 427-436.

Goulet, J.-A. & Smith, I. F. C. (2013). Predicting the usefulness of monitoring for identifying the behavior of structures. Journal of Structural Engineering, 139(10), p. 1716-1727.

Goulet, J.-A. & Smith, I. F.C. (2013). Structural identification with systematic errors and unknown uncertainty dependencies. Computers & Structures, 128, p. 251-258.

Goulet, J.-A., Texier, M., Michel, C., Smith, I. F. C. & Chouinard, L. (2014). Quantifying the effects of modeling simplifications for structural identification of bridges. Journal of Bridge Engineering, 19(1), p. 59-71.

Javadi, N. & Mahdi, T.-F. (2014). Experimental investigation into rockfill dam failure initiation by overtopping. Natural Hazards, 74(2), p. 623-637.

Lajeunesse, A., Blais, M., Barbeau, B., Sauvé, S. & Gagnon, C. (2013). Ozone oxidation of antidepressants in wastewater – Treatment evaluation and characterization of new by-products by LC-QToFMS. Chemistry Central Journal, 7.

Lavoie, B. & Mahdi, T.-F. (2017). Comparison of two-dimensional flood propagation models: SRH-2D and Hydro_AS-2D. Natural Hazards, 86(3), p. 1207-1222.

Lavoie, B. & Mahdi, T.-F. (2020). Manning's roughness coefficient determination in laboratory experiments using 2D modeling and automatic calibration. La Houille Blanche (1), p. 22-33.

Lemieux, J.-M., Hassaoui, J., Molson, J., Therrien, R., Therrien, P., Chouteau, M. & Ouellet, M. (2015). Simulating the impact of climate change on the groundwater resources of the Magdalen Islands, Québec, Canada. Journal of Hydrology: Regional Studies, 3, p. 400-423.

Levasseur, M., Généreux, M., Bruneau, J.-F., Vanasse, A., Chabot, É., Beaulac, C. & Bédard, M.-M. (2015). Importance of proximity to resources, social support, transportation and neighborhood security for mobility and social participation in older adults: results from a scoping study. BMC Public Health, 15.

Liu, G., Li, L., Yao, M., Landry, D., Malek, F., Yang, X. & Guo, L. (2017). An investigation of the Uniaxial Compressive Strength of a cemented hydraulic backfill made of alluvial sand. Minerals, 7(1), p. 1-13.

Mahdi, T.-F., Jain, G., Patel, S. & Sidhu, A. K. (2019). A review of cyclone track shifts over the Great Lakes of North America: implications for storm surges. Natural Hazards, 98(1), p. 119-135.

Moniruzzaman, M., Páez, A. & Morency, C. (2014). Compliance potential mapping: a tool to assess potential contributions of walking towards physical activity guidelines. BMC Public Health, 14.

Moradin, N., Torre, S., Gauthier, S., Tam, M., Hawari, J., Vandercruyssen, K., ... Gros, P. (2016). Cysteamine broadly improves the anti-plasmodial activity of artemisinins against murine blood stage and cerebral malaria. Malaria Journal, 15, p. 1-12.

Naldi, A. C., Fayad, P. B., Prévost, M. & Sauvé, S. (2016). Analysis of steroid hormones and their conjugated forms in water and urine by on-line solid-phase extraction coupled to liquid chromatography tandem mass spectrometry. Chemistry Central Journal, 10.

Nguyen, B., Claveau-Mallet, D., Hernandez, L. M., Xu, E. G., Farner, J. M. & Tufenkji, N. (2019). Separation and analysis of microplastics and nanoplastics in complex environmental samples. Accounts of chemical research, 52(4), p. 858-866.

Nguyen, L. H. & Goulet, J.-A. (2018). Anomaly detection with the Switching Kalman Filter for structural health monitoring. Structural Control and Health Monitoring, 25(4), p. 1-18.

Nguyen, L. H. & Goulet, J.-A. (2018). Structural health monitoring with dependence on non-harmonic periodic hidden covariates. Engineering Structures, 166, p. 187-194.

Oligny, L., Bérubé, P. R. & Barbeau, B. (2016). Impact of PAC Fines in Fouling of Polymeric and Ceramic Low-Pressure Membranes for Drinking Water Treatment. Membranes, 6(3).

Paez, A., Mercado, R. G., Farber, S., Morency, C. & Roorda, M. (2010). Accessibility to health care facilities in Montreal Island: an application of relative accessibility indicators from the perspective of senior and non-senior residents. International Journal of Health Geographics, 9.

Pagé, P., Li, L., Yang, P. & Simon, R. (2019). Numerical investigation of the stability of a base-exposed sill mat made of cemented backfill. International Journal of Rock Mechanics and Mining Sciences, 114, p. 195-207.

Pasquier, R., D’Angelo, L., Goulet, J.-A., Acevedo, C., Nussbaumer, A. & Smith, I. F. C. (2016). Measurement, data interpretation, and uncertainty propagation for fatigue assessments of structures. Journal of Bridge Engineering, 21(5), 04015087-1-04015087-13.

Pasquier, R., Goulet, J.-A., Acevedo, C. & Smith, I. F. C. (2014). Improving fatigue evaluations of structures using in-service behavior measurement data. Journal of Bridge Engineering, 19(11), p. 1-10.

Pasquier, R., Goulet, J.-A. & Smith, I. F.C. (2017). Measurement system design for civil infrastructure using expected utility. Advanced Engineering Informatics, 32, p. 40-51.

Pelletier, K. & Léger, P. (2017). Nonlinear seismic modeling of reinforced concrete cores including torsion. Engineering Structures, 136, p. 380-392.

Pourahmad, H., Haddad, M., Claveau-Mallet, D. & Barbeau, B. (2019). Impact of media coating on simultaneous manganese removal and remineralization of soft water via calcite contactor. Water Research, 161, p. 601-609.

Puigagut, J., Chazarenc, F. & Comeau, Y. (2014). Influence of tubificid worms on nutrient fluxes across water-sediment interface in fish farm settling ponds. Knowledge and Management of Aquatic Ecosystems (413), p. 1-12.

Quach, A. N.-O., Tabor, L., Dumont, D., Courcelles, B. & Goulet, J.-A. (2017). A machine learning approach for characterizing soil contamination in the presence of physical site discontinuities and aggregated samples. Advanced Engineering Informatics, 33, p. 60-67.

Sioui, L., Morency, C. & Verreault, H. (2018). An Octopus and a circle at the basis of a framework for the evaluation of sustainable mobility. Transport, 33(1), p. 242-248.

Stipancic, J., Miranda-Moreno, L., Labbe, A. & Saunier, N. (2019). Measuring and visualizing space–time congestion patterns in an urban road network using large-scale smartphone-collected GPS data. Transportation Letters, 11(7), p. 391-401.

Tabor, L., Goulet, J.-A., Charron, J.-P. & Desmettre, C. (2018). Probabilistic modeling of heteroscedastic laboratory experiments using Gaussian process regression. Journal of Engineering Mechanics, 144(6), p. 1-10.

Tardif-Drolet, M., Li, L., Pabst, T., Zagury, G. J., Mermillod-Blondin, R. & Genty, T. (2020). Revue de la réglementation sur la valorisation des résidus miniers hors site au Québec. Dossiers environnement/Environmental Reviews, p. 1-13.

Tournerie, B. & Chouteau, M. (2002). Analysis of magnetotelluric data along the Lithoprobe seismic line 21 in the Blake River Group, Abitibi, Canada. Earth, Planets and Space, 54(5), p. 575-589.

van Wendel de Joode, B., Barbeau, B., Bouchard, M. F., Mora, A. M., Skytt, Å., Córdoba, L., ... Mergler, D. (2016). Manganese concentrations in drinking water from villages near banana plantations with aerial mancozeb spraying in Costa Rica: Results from the Infants' Environmental Health Study (ISA). Environmental Pollution, 215(C), p. 247-257.

Virolainen, A., Maurice, C. & Pabst, T. (2020). Effective oxygen diffusion coefficient of till and green liquor dregs (GLD) mixes used in sealing layer in mine waste covers. Water, Air, & Soil Pollution, 231(2).

Vulliet, F., Ben Ftima, M. & Léger, P. (2017). Stability of cracked concrete hydraulic structures by nonlinear quasi-static explicit finite element and 3D limit equilibrium methods. Computers & Structures, 184, p. 25-35.

Wang, R., Li, L. & Simon, R. (2019). A model for describing and predicting the creep strain of rocks from the primary to the tertiary stage. International Journal of Rock Mechanics and Mining Sciences, 123, p. 104087.

Winter, J., Barbeau, B. & Bérubé, P. (2017). Nanofiltration and tight ultrafiltration membranes for natural organic matter removal-contribution of fouling and concentration polarization to filtration resistance. Membranes, 7(3).

Yang, P., Li, L. & Aubertin, M. (2018). Theoretical and numerical analyses of earth pressure coefficient along the centerline of vertical openings with granular fills. Applied Sciences, 8(10).

Yu, C., Ji, S. & Li, Q. (2016). Effects of porosity on seismic velocities, elastic moduli and Poisson's ratios of solid materials and rocks. Journal of Rock Mechanics and Geotechnical Engineering, 8(1), p. 35-49.

Institut de génie biomédical

Amiri, M., Pouliot, P., Bonnéry, C., Leclerc, P.-O., Desjardins, M., Lesage, F. & Joanette, Y. (2014). An exploration of the effect of hemodynamic changes due to normal aging on the fNIRS response to semantic processing of words. Frontiers in Neurology, 5.

Avti, P. K., Maysinger, D. & Kakkar, A. (2013). Alkyne-Azide “click” chemistry in designing nanocarriers for applications in biology. Molecules (Basel, Switzerland), 18(8), p. 9531-9549.

Brunet, A. R., Labelle, F., Wong, P. & Gervais, T. (2017). Reconfigurable microfluidic magnetic valve arrays: towards a radiotherapy-compatible spheroid culture platform for the combinatorial screening of cancer therapies. Sensors, 17(10).

Cadotte, A., Cadotte, D. W., Livne, M., Cohen-Adad, J., Fleet, D., Mikulis, D. & Fehlings, M. G. (2015). Spinal Cord Segmentation by One Dimensional Normalized Template Matching: A Novel, Quantitative Technique to Analyze Advanced Magnetic Resonance Imaging Data. PloS One, 10(10).

Chevrefils, C., Cheriet, F., Grimard, G., Miron, M.-C. & Aubin, C.-É. (2012). Quantitative evaluation of an automatic segmentation method for 3D reconstruction of intervertebral scoliotic disks from MR images. BMC Medical Imaging, 12.

Craddock, R. C., Margulies, D. S., Bellec, P., Nichols, B. N., Alcauter, S., Barrios, F. A., ... Xu, T. (2016). Brainhack: a collaborative workshop for the open neuroscience community. GigaScience, 5(1), p. 1-8.

Dupuy, O., Gauthier, C. J., Fraser, S. A., Desjardins-Crépeau, L., Desjardins, M., Mekary, S., ... Bherer, L. (2015). Higher levels of cardiovascular fitness are associated with better executive function and prefrontal oxygenation in younger and older women. Frontiers in Human Neuroscience, 9.

Jacobs, M., Benovoy, M., Chang, L.-C., Arai, A. E. & Hsu, L.-Y. (2016). Evaluation of an automated method for arterial input function detection for first-pass myocardial perfusion cardiovascular magnetic resonance. Journal of Cardiovascular Magnetic Resonance, 18, p. 1-11.

Martel, S. & Mohammadi, M. (2016). Switching between magnetotactic and aerotactic displacement controls to enhance the efficacy of MC-1 magneto-aerotactic bacteria as cancer-fighting nanorobots. Micromachines, 7(6), p. 1-12.

Martin, C.-O., Pontbriand-Drolet, S., Daoust, V., Yamga, E., Amiri, M., Hubner, L. C. & Ska, B. (2018). Narrative discourse in young and older adults: behavioral and NIRS analyses. Frontiers in Aging Neuroscience, 10.

Mingasson, T., Duval, T., Stikov, N. & Cohen-Adad, J. (2017). AxonPacking: an open-source software to simulate arrangements of axons in white matter. Frontiers in Neuroinformatics, 11, p. 1-12.

Nada, O., Marian, A., Tran-Khanh, N., Buschmann, M., Podtetenev, M., Vidal, F., ... Brunette, I. (2014). Effect of Corneal Hydration on the Quality of the Femtosecond Laser Anterior Lamellar Cut. PloS One, 9(6).

Phan, T. V., Seoud, L., Chakor, H. & Cheriet, F. (2016). Automatic screening and grading of age-related macular degeneration from texture analysis of fundus images. Journal of Ophthalmology, 2016, p. 1-11.

Pickenhahn, V., Darras, V., Dziopa, F., Biniecki, K., De Crescenzo, G., Lavertu, M. & Buschmann, M. (2015). Regioselective thioacetylation of chitosan end-groups for nanoparticle gene delivery systems. Chemical Science, 6(8), p. 4650.

Pickenhahn, V., Grange, M., De Crescenzo, G., Lavertu, M. & Buschmann, M. (2017). Regioselective chitosan end-group activation: the triskelion approach. RSC Advances, 7(30), p. 18628-18638.

Plantard, P., Auvinet, E., Pierres, A.-S. & Multon, F. (2015). Pose Estimation with a Kinect for Ergonomic Studies: Evaluation of the Accuracy Using a Virtual Mannequin. Sensors, 15(1).

Rousset, N., Monet, F. & Gervais, T. (2017). Simulation-assisted design of microfluidic sample traps for optimal trapping and culture of non-adherent single cells, tissues, and spheroids. Scientific Reports, 7.

Saliani, A., Perraud, B., Duval, T., Stikov, N., Rossignol, S. & Cohen-Adad, J. (2017). Axon and myelin morphology in animal and human spinal cord. Frontiers in Neuroanatomy, 11.

Samson, R. S., Lévy, S., Schneider, T., Smith, A. K., Smith, S. A., Cohen-Adad, J. & Gandini Wheeler-Kingshott, C. A. M. (2016). ZOOM or non-ZOOM? Assessing spinal cord diffusion tensor imaging protocols for multi-centre studies. PLoS ONE, 11(5), p. 1-14.

Simard, P., Galarneau, H., Marois, S., Rusu, D., Hoemann, C. D., Poubelle, P. E., ... Fernandes, M. J.G. (2009). Neutrophils exhibit distinct phenotypes toward chitosans with different degrees of deacetylation: implications for cartilage repair. Arthritis Research and Therapy, 11(3).

Stroman, P.W., Wheeler-Kingshott, C., Bacon, M., Schwab, J.M., Bosma, R., Brooks, J., ... Tracey, I. (2014). The current state-of-the-art of spinal cord imaging: Methods. NeuroImage, 84, p. 1070.

Tardif, P.-L., Bertrand, M.-J., Abran, M., Castonguay, A., Lefebvre, J., Stähli, B. E., ... Lesage, F. (2016). Validating intravascular imaging with serial optical coherence tomography and confocal fluorescence microscopy. International Journal of Molecular Sciences, 17(12), p. 1-12.

Thibault, M., Nimesh, S., Lavertu, M. & Buschmann, M. (2010). Intracellular Trafficking and Decondensation Kinetics of Chitosan–pDNA Polyplexes. Molecular Therapy, 18(10), p. 1787-1795.

Trpevski, I., Dimitrova, T., Boshkovski, T., Stikov, N. & Kocarev, L. (2016). Graphlet characteristics in directed networks. Scientific Reports, 6, p. 1-8.

Watson, M., Sawan, M. & Dancause, N. (2016). The duration of motor responses evoked with intracortical microstimulation in rats is primarily modulated by stimulus amplitude and train duration. PLoS ONE, 11(7), p. 1-16.

Zaimi, A., Duval, T., Gasecka, A., Côté, D., Stikov, N. & Cohen-Adad, J. (2016). AxonSeg: open source software for axon and myelin segmentation and morphometric analysis. Frontiers in Neuroinformatics, 10, p. 1-13.

Institut de génie nucléaire

Harrisson, G. & Marleau, G. (2013). Simulation strategy for the evaluation of neutronic properties of a Canadian SCWR fuel channel. Science and Technology of Nuclear Installations, 2013, p. 1-10.

Non applicable

Beaudry, C. (2001). Entry, Growth and Patenting in Industrial Clusters: A Study of the Aerospace Industry in the UK. International Journal of the Economics of Business, 8(3), p. 405-436.

Beaudry, C. & Breschi, S. (2003). Are firms in clusters really more innovative? Economics of Innovation and New Technology, 12(4), p. 325-342.

This list was generated on Thu Aug 13 01:37:23 2020 EDT.