<  Back to the Polytechnique Montréal portal

Items where Research Center is "Autre"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | B | D | F | G | H | I | K | L | M | O | P | R | S | T | V | W | Y | Z
Number of items at this level: 67.


Abondo, C. & Pierre, S. (2005). Dynamic location and forwarding pointers for mobility management. Mobile Information Systems, 1, p. 3-24.

Aboulfadl, K., De Potter, C., Prévost, M. & Sauvé, S. (2010). Time-dependent integrity during storage of natural surface water samples for the trace analysis of pharmaceutical products, feminizing hormones and pesticides. Chemistry Central Journal, 4.

Arnold, E., Hammami, I., Chen, J., Gupte, S., Durocher, Y. & Jolicoeur, M. (2016). Overexpression of G6PDH does not affect the behavior of HEK-293 clones stably expressing interferon-α2b. AIMS Bioengineering, 3(3), p. 319-336.

Aubertin, M., Li, L., Simon, R. & Buissière, B. (2003). A general plasticity and failure criterion for materials of variable porosity. (Technical Report n° EPM-RT-2003-11).

Aubertin, M., Li, L., Simon, R. & Buissière, B. (2003). Un critère général de plasticité et de rupture pour les matériaux à porosité variable. (Technical Report n° EPM-RT-2003-06).

Aubertin, M., Mbonimpa, M., Buissière, B. & Chapuis, R. P. (2003). Development of a model to predict the water retention curve using basic geotechnical properties. (Technical Report n° EPM-RT-2003-01).

Aucoin, M. G., McMurray-Beaulieu, V., Poulin, F., Boivin, E. B., Chen, J., Ardelean, F. M., ... Jolicoeur, M. (2006). Identifying conditions for inducible protein production in E. coli: combining a fed-batch and multiple induction approach. Microbial Cell Factories, 5.


Bendavid, Y., Castro, L., Lefebvre, L. A. & Lefebvre, É. (2006). Explorando los impactos de la RFID en los procesos de negocios de una cadena de suministro. Journal of Technology Management & Innovation, 1(4), p. 30-42.

Bensadoun, F., Kchit, N., Billotte, C., Bickerton, S., Trochu, F. & Ruiz, E. (2011). A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding. International Journal of Polymer Science, 2011.

Bensadoun, F., Kchit, N., Billotte, C., Trochu, F. & Ruiz, E. (2011). A Comparative Study of Dispersion Techniques for Nanocomposite Made with Nanoclays and an Unsaturated Polyester Resin. Journal of Nanomaterials, 2011, p. 406087.

Berlín, G., Brassard, G., Bussières, F., Godbout, N., Slater, J. A. & Tittel, W. (2011). Experimental loss-tolerant quantum coin flipping. Nature Communications, 2.

Billotte, C., Roland Fotsing, E. & Ruiz, E. (2017). Optimization of alumina slurry for oxide-oxide ceramic composites manufactured by injection molding. Advances in Materials Science and Engineering, 2017.

Burnet, J.-B., Faraj, T., Cauchie, H.-M., Joaquim-Justo, C., Servais, P., Prévost, M. & Dorner, S. (2017). How does the cladoceran Daphnia pulex affect the fate of Escherichia coli in water? PLoS ONE, 12(2), p. 1-16.


Dandres, T., Farrahi Moghaddam, R., Nguyen, K. K., Lemieux, Y., Samson, R. & Cheriet, M. (2017). Consideration of marginal electricity in real-time minimization of distributed data centre emissions. Journal of Cleaner Production, 143, p. 116-124.

Denier, S., Khomh, F. & Guéhéneuc, Y.-G. (2008). Reverse-engineering the literature on design patterns and reverse-engineering. (Technical Report n° EPM-RT-2008-09).


Fosso Wamba, S., Lefebvre, L. A. & Lefebvre, E. (2007). Integrating RFID technology and EPC network into a B2B retail supply chain: a step toward intelligent business processes. Journal of Technology Management & Innovation, 2(2), p. 114-124.


Ghaedsharaf, M., Brunel, J.-E. & Laberge Lebel, L. (2017, July). Fiber-level bi-axial braid simulation for braid-trusion. Paper presented at 10th Canadian International Conference on Composites (CANCOM 2017), Ottawa, Ontario.

Ghane Motlagh, B., Choueib, M., Hajhosseini Mesgar, A., Hasanuzzaman, M. & Sawan, M. (2016). Direct growth of carbon nanotubes on new high-density 3D pyramid-shaped microelectrode arrays for brain-machine interfaces. Micromachines, 7(9), p. 1-17.

Goffaux, G., Hammami, I. & Jolicoeur, M. (2017). A dynamic metabolic flux analysis of myeloid-derived suppressor cells confirms immunosuppression-related metabolic plasticity. Scientific Reports, 7(1).


Houeto, F. & Pierre, S. (2007). Jitter characterization in admission control and pricing issues in integrated multiservice networks. Journal of Computer Science, 3(12), p. 965-979.


Issaad, O., Pierre, S., Ivascu, G. I. & Garcia, O. (2008). A novel approach to modeling and flooding in ad-hoc wireless networks. Journal of Computer Science, 4(12), p. 967-975.


Kassem, A., Sawan, M., Boukadoum, M. & Haidar, A. (2005). Perception SoC based on an ultrasonic array of sensors : efficient DSP core implementation and subsequent experimental results. EURASIP Journal on Advances in Signal Processing, 2005(7), p. 1071-1081.

Krouchev, N. I., Danner, S. M., Vinet, A., Rattay, F. & Sawan, M. (2014). Energy-Optimal Electrical-Stimulation Pulses Shaped by the Least-Action Principle. PloS One, 9(3).

Krouchev, N. I., Rattay, F., Sawan, M. & Vinet, A. (2015). From Squid to Mammals with the HH Model through the Nav Channels’ Half-Activation-Voltage Parameter. PloS One, 10(12).


Laflaquière, B., Leclercq, G., Choey, C., Chen, J., Peres, S., Ito, C. & Jolicoeur, M. (2018). Identifying biomarkers of Wharton's Jelly mesenchymal stromal cells using a dynamic metabolic model: the cell passage effect. Metabolites, 8(1).

Lafortune, P., Aubin, C.-É., Boulanger, H., Villemure, I., Bagnall, K. M. & Moreau, A. (2007). Biomechanical simulations of the scoliotic deformation process in the pinealectomized chicken: a preliminary study. Scoliosis and Spinal Disorders, 2, p. 16.

Lavoie-Cardinal, F., Salesse, C., Bergeron, É., Meunier, M. & De Koninck, P. (2016). Gold nanoparticle-assisted all optical localized stimulation and monitoring of Ca2+ signaling in neurons. Scientific Reports, 6, p. 1-9.

Lebel, K., Duval, C., Nguyen, H. P., Plamondon, R. & Boissy, P. (2018). Cranio-caudal kinematic turn signature assessed with inertial systems as a marker of mobility deficits in Parkinson's disease. Frontiers in Neurology, 9.

Lebel, K., Nguyen, H., Duval, C., Plamondon, R. & Boissy, P. (2017). Capturing the Cranio-Caudal Signature of a Turn with Inertial Measurement Systems: Methods, Parameters Robustness and Reliability. Frontiers in Bioengineering and Biotechnology, 5.

Li, P. L. (2019). Exosquelette passif pour réduction de chargement lombaire pour levée de charge symétrique. (Study Report - Graduate Studies).

Li, P. L. (2018). Modélisation multicorps du membre supérieur. (Internship Report - Graduate Studies).


Martel, S. & Mohammadi, M. (2016). Switching between magnetotactic and aerotactic displacement controls to enhance the efficacy of MC-1 magneto-aerotactic bacteria as cancer-fighting nanorobots. Micromachines, 7(6), p. 1-12.

Mbonimpa, M. & Aubertin, M. (2003). Mouvement des gaz en milieux poreux partiellement saturés. (Technical Report n° EPM-RT-2003-04).

Mbonimpa, M., Aubertin, M., Buissière, B. & Aachib, M. (2002). Oxygen diffusion and consumption in unsaturated cover materials. (Technical Report n° EPM-RT-2002-04).

Mingasson, T., Duval, T., Stikov, N. & Cohen-Adad, J. (2017). AxonPacking: an open-source software to simulate arrangements of axons in white matter. Frontiers in Neuroinformatics, 11, p. 1-12.

Mirzaei, M. & Sawan, M. (2014). Microelectronics-Based Biosensors Dedicated to the Detection of Neurotransmitters: A Review. Sensors, 14(10).


O'Reilly, C., Plamondon, R. & Lebrun, L.-H. (2014). Linking brain stroke risk factors to human movement features for the development of preventive tools. Frontiers in Aging Neuroscience.


Pagé, P., Li, L., Yang, P. & Simon, R. (2019). Numerical investigation of the stability of a base-exposed sill mat made of cemented backfill. International Journal of Rock Mechanics and Mining Sciences, 114, p. 195-207.

Paraschivoiu, I., Trifu, O. & Saeed, F. (2009). H-Darrieus wind turbine with blade pitch control. International Journal of Rotating Machinery, 2009, p. 505343.

Pelletier, S.-J., Pierre, S. & Hoang, H. H. (2003). Modeling a multi-agent system for retrieving information from distributed sources. Journal of Computing and Information Technology, 11(1), p. 15-39.

Peres, S., Jolicoeur, M., Moulin, C., Dague, P. & Schuster, S. (2017). How important is thermodynamics for identifying elementary flux modes? PLoS ONE, 12(2), p. 1-20.

Plamondon, R., Feng, C. & Djioua, M. (2008). The convergence of a neuromuscular impulse response towards a lognormal, from theory to practice. (Technical Report n° EPM-RT-2008-08).

Plamondon, R., O'Reilly, C., Rémi, C. & Duval, T. (2013). The lognormal handwriter: learning, performing, and declining. Frontiers in Psychology, 4.


Rajagopalan, S., Sawan, M., Ghafar-Zadeh, E., Savadogo, O. & Chodavarapu, V. (2008). A Polypyrrole-based Strain Sensor Dedicated to Measure Bladder Volume in Patients with Urinary Dysfunction. Sensors, 8(8).

Ren, X., Zhao, X., Turcotte, F., Deschênes, J.-S., Tremblay, R. & Jolicoeur, M. (2017). Current lipid extraction methods are significantly enhanced adding a water treatment step in Chlorella protothecoides. Microbial Cell Factories, 16, p. 1-13.

Rhazi, A. E., Pierre, S. & Boucheneb, H. (2007). A secure protocol based on a sedentary agent for mobile agent environments. Journal of Computer Science, 3(1), p. 35-42.

Roa Gonzalez, I. R., Lima, B. C., Pincheira, P. I.R., Brum, A. A., Macêdo, A. M.S., Vasconcelos, G. L., ... Kashyap, R. (2017). Turbulence hierarchy in a random fibre laser. Nature Communications, 8, p. 1-8.

Rodríguez Varela, F. J., Luna, S. & Savadogo, O. (2009). Synthesis and Evaluation of Highly Tolerant Pd Electrocatalysts as Cathodes in Direct Ethylene Glycol Fuel Cells (DEGFC). Energies, 2(4), p. 944-956.

Rokbani, H., Daigle, F. & Ajji, A. (2018). Combined effect of ultrasound stimulations and autoclaving on the enhancement of antibacterial activity of ZnO and SiO₂/ZnO nanoparticles. Nanomaterials, 8(3).


Safa, H. & Pierre, S. (2005). A new architecture for improving location management in PCS networks. Journal of Computer Science, 1(2), p. 249-258.

Safavieh, M., Qasaimeh, M. A., Vakil, A., Juncker, D. & Gervais, T. (2015). Two-Aperture Microfluidic Probes as Flow Dipoles: Theory and Applications. Scientific Reports, 5.

Salam, M., Sawan, M. & Nguyen, D. (2010). Low-Power Implantable Device for Onset Detection and Subsequent Treatment of Epileptic Seizures: A Review. Journal of Healthcare Engineering, 1(2), p. 169-184.

Salam, M. T., Gelinas, S., Desgent, S., Duss, S., Bernier Turmel, F., Carmant, L., ... Nguyen, D. K. (2014). Subdural porous and notched mini-grid electrodes for wireless intracranial electroencephalographic recordings. Journal of Multidisciplinary Healthcare, 7, p. 573-586.

Saliani, A., Perraud, B., Duval, T., Stikov, N., Rossignol, S. & Cohen-Adad, J. (2017). Axon and myelin morphology in animal and human spinal cord. Frontiers in Neuroanatomy, 11.

Sato, F.-K., Pierre, S. & Glitho, R. H. (2005). Retrieving information from the invisible web using mobile agents. Journal of Computer Science, 1(2), p. 283-289.

Segovia, A. (2017). Guide d’utilisation des capteurs Trigno IM dans un contexte de réadaptation des membres supérieurs avec le REA plan. (Internship Report - Graduate Studies).


Tardif-Drolet, M., Li, L., Pabst, T., Zagury, G. J., Mermillod-Blondin, R. & Genty, T. (2020). Revue de la réglementation sur la valorisation des résidus miniers hors site au Québec. Dossiers environnement/Environmental Reviews, p. 1-13.

Teixeira, T., Hafyane, T., Stikov, N., Akdeniz, C., Greiser, A. & Friedrich, M. G. (2016). Comparison of different cardiovascular magnetic resonance sequences for native myocardial T1 mapping at 3T. Journal of Cardiovascular Magnetic Resonance, 18, p. 1-12.


Valenzuela, E., Ramos-Sanchez, V., Lambert Arista, A. A. & Savadogo, O. (2013). Nanostructured TiO2 doped with Nb as a novel support for PEMFC. Journal of Materials, 2013, p. 1-6.

Viau, S., Majeau-Bettez, G., Spreutels, L., Legros, R., Margni, M. & Samson, R. (2020). Substitution modelling in life cycle assessment of municipal solid waste management. Waste Management, 102, p. 795-803.

Virolainen, A., Maurice, C. & Pabst, T. (2020). Effective oxygen diffusion coefficient of till and green liquor dregs (GLD) mixes used in sealing layer in mine waste covers. Water, Air, & Soil Pollution, 231(2).


Wang, R., Li, L. & Simon, R. (2019). A model for describing and predicting the creep strain of rocks from the primary to the tertiary stage. International Journal of Rock Mechanics and Mining Sciences, 123, p. 104087.

Watson, M., Sawan, M. & Dancause, N. (2016). The duration of motor responses evoked with intracortical microstimulation in rats is primarily modulated by stimulus amplitude and train duration. PLoS ONE, 11(7), p. 1-16.


Yang, P., Li, L. & Aubertin, M. (2018). Theoretical and numerical analyses of earth pressure coefficient along the centerline of vertical openings with granular fills. Applied Sciences, 8(10).

Yiannakas, M. C., Mustafa, A. M., De Leener, B., Kearney, H., Tur, C., Altmann, D. R., ... Gandini Wheeler-Kingshott, C. A.M. (2015). Fully automated segmentation of the cervical cord from T1-weighted MRI using PropSeg: Application to multiple sclerosis. NeuroImage - Clinical, 10.


Zalzal, V., Gava, R., Kelouwani, S. & Cohen, P. (2009). Acropolis: A Fast Protoyping Robotic Application. International Journal of Advanced Robotic Systems, 6(1), p. 8.

Zhao, X., Condruz, S., Chen, J. & Jolicoeur, M. (2016). A quantitative metabolomics study of high sodium response in Clostridium acetobutylicum ATCC 824 acetone-butanol-ethanol (ABE) fermentation. Scientific Reports, 6, p. 1-13.

This list was generated on Mon Mar 8 01:38:57 2021 EST.