<  Retour au portail Polytechnique Montréal

Documents avec le centre de recherche "Non applicable"

Monter d'un niveau
Exporter au format [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Aller à : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | V | W | Y | Z
Nombre de documents à ce niveau: 259.

A

Abobakr, S. A., Sadid, W. H. & Zhu, G. (2018). Game-theoretic decentralized model predictive control of thermal appliances in discrete-event systems framework. IEEE Transactions on Industrial Electronics, 65(8), p. 6446-6456.

Abou-Abbas, L., Tadj, C., Gargour, C. & Montazeri, L. (2017). Expiratory and inspiratory cries detection using different signals' decomposition techniques. Journal of Voice, 31(2), 259.E13-259.E28.

Aceves, M. C. & Fuamba, M. (2016). Methodology for selecting Best Management Practices integrating multiple stakeholders and criteria. Part 1: methodology. Water, 8(2), p. 1-14.

Aceves, M. C. & Fuamba, M. (2016). Methodology for selecting Best Management Practices integrating multiple stakeholders and criteria. Part 2: case study. Water, 8(2), p. 1-19.

Ali, N. (2010). Traceability improvement for software miniaturization. (Rapport technique n° EPM-RT-2010-05).

Ali, N., Wu, W., Antoniol, G., Di Penta, M., Guéhéneuc, Y.-G. & Hayes, J. H. (2010). A novel process and its implementation for the multi-objective miniaturization of software. (Rapport technique n° EPM-RT-2010-04).

Aloise, D. & Contardo, C. (2018). A sampling-based exact algorithm for the solution of the minimax diameter clustering problem. Journal of Global Optimization, 71(3), p. 613-630.

Andriessen, E. M.M.A., Wilson, A. M., Mawambo, G., Dejda, A., Miloudi, K., Sennlaub, F. & Sapieha, P. (2016). Gut microbiota influences pathological angiogenesis in obesity‐driven choroidal neovascularization. EMBO Molecular Medicine, 8(12), p. 1366.

Appio, F. P., Achiche, S., Martini, A. & Beaudry, C. (2017). On designers’ use of biomimicry tools during the new product development process: an empirical investigation. Technology Analysis & Strategic Management, p. 1-15.

Armellini, F., Kaminski, P. C. & Beaudry, C. (2014). The Open Innovation Journey in Emerging Economies: An Analysis of the Brazilian Aerospace Industry. Journal of Aerospace Technology and Management, 6(4), p. 462-474.

Arnaoudova, V. (2010). Defining linguistic antipatterns towards the improvement of source code quality. (Rapport technique n° EPM-RT-2010-07).

Avti, P. K., Maysinger, D. & Kakkar, A. (2013). Alkyne-Azide “click” chemistry in designing nanocarriers for applications in biology. Molecules (Basel, Switzerland), 18(8), p. 9531-9549.

B

Bakhtiari, M., Lakis, A. & Kerboua, Y. (2018). Nonlinear vibration of truncated conical shells : Donnell, Sanders and Nemeth theories. (Rapport technique n° EPM-RT-2018-01).

Barirani, A., Agard, B. & Beaudry, C. (2013). Competence maps using agglomerative hierarchical clustering. Journal of Intelligent Manufacturing, 24(2), p. 373-384.

Barirani, A., Agard, B. & Beaudry, C. (2013). Discovering and assessing fields of expertise in nanomedicine: a patent co-citation network perspective. Scientometrics, 94(3), p. 1111-1136.

Beaini, D., Achiche, S., Law-Kam Cio, Y.-S. & Raison, M. (2018). Novel convolution kernels for computer vision and shape analysis based on electromagnetism. (Autre).

Beamonte, R. & Dagenais, M. R. (2016). Detection of common problems in real-Time and multicore systems using model-based constraints. Scientific Programming, 2016, p. 1-18.

Beaudry, C. (2001). Entry, Growth and Patenting in Industrial Clusters: A Study of the Aerospace Industry in the UK. International Journal of the Economics of Business, 8(3), p. 405-436.

Beaudry, C. & Breschi, S. (2003). Are firms in clusters really more innovative? Economics of Innovation and New Technology, 12(4), p. 325-342.

Beaudry, C. & Schiffauerova, A. (2009). Who's right, Marshall or Jacobs? The localization versus urbanization debate. Research Policy, 38(2), p. 318-337.

Beaudry, C. & Swann, G. M. P. (2009). Firm growth in industrial clusters of the United Kingdom. Small Business Economics, 32(4), p. 409-424.

Belzile, B. & Birglen, L. (2018). Practical considerations on proprioceptive tactile sensing for underactuated fingers. Transactions of the Canadian Society for Mechanical Engineering, 42(1), p. 71-79.

Benbachir, A., Melo, I. F. D., Dagenais, M. R. & Adams, B. (2017, juillet). Automated performance deviation detection across software versions releases. Communication écrite présentée à 2017 IEEE International Conference on Software Quality, Reliability and Security (QRS), Prague, Czech Republic (8 pages).

Benjelloun, K. & Boukas, E.-K. (1997). Stochastic stability of linear time-delay system with Markovian jumping parameters. Mathematical Problems in Engineering, 3(3), p. 187-201.

Benjelloun, K., Boukas, E.-K., Costa, O. L. V. & Shi, P. (1998). Design of robust controller for linear systems with Markovian jumping parameters. Mathematical Problems in Engineering, 4(4), p. 269-288.

Bérard, A., Patience, G. S., Chouinard, G. & Tavares, J. R. (2016). Photo initiated chemical vapour deposition to increase polymer hydrophobicity. Scientific Reports, 6(1).

Bertauld, T. & Dagenais, M. R. (2017). Low-level trace correlation on heterogeneous embedded systems. EURASIP Journal on Embedded Systems, 2017(1), p. 1-14.

Bhattacharya, N. (2010). Verification of software-hardware hybrid systems. (Rapport technique n° EPM-RT-2010-10).

Biancheri, C. & Dagenais, M. R. (2016). Fine-grained multilayer virtualized systems analysis. Journal of Cloud Computing, 5(1), p. 1-14.

Biancheri, C., Ezzati-Jivan, N. & Dagenais, M. R. (2016, août). Multilayer virtualized systems analysis with kernel tracing. Communication écrite présentée à 4th International Conference on Future Internet of Things and Cloud Workshops (FiCloudW 2016), Vienna, Austria (7 pages).

Blanc, L. & Raimbault, V. (2003). Contrôle en température d'un four cylindrique à trois zones de chauffe. (Rapport technique n° EPM-RT-2003-09).

Boughanmi, F. (2010). Change impact analysis of multi-language and heterogeneously-licensed software. (Rapport technique n° EPM-RT-2010-06).

Bouheret, S. & Bernier, M. (2018). Modelling of a water-to-air variable capacity ground-source heat pump. Journal of Building Performance Simulation, 11(3), p. 1-11.

Boukas, E.-K., Shi, P., Karan, M. & Kaya, C. Y. (2002). Linear discrete-time systems with Markovian jumps and mode dependent time-delay: Stability and stabilizability. Mathematical Problems in Engineering, 8(2), p. 123-133.

Boukas, E.-K. & Yang, H. (1997). Robust stability of nonlinear piecewise deterministic systems under matching conditions. Mathematical Problems in Engineering, 3(3), p. 203-215.

Boukas, E.-K. & Yang, H. (1996). Stability of stochastic systems with jumps. Mathematical Problems in Engineering, 3(2), p. 173-185.

Boutayeb, H. & Nedil, M. (2016). High gain slot array with Fabry-Perot cavity feeding circuit. International Journal of Antennas and Propagation, 2016, p. 1-5.

Brosseau, C., Émile, B., Labelle, M.-A., Laflamme, É., Dold, P. L. & Comeau, Y. (2016). Compact secondary treatment train combining a lab-scale moving bed biofilm reactor and enhanced flotation processes. Water Research, 106, p. 571-582.

C

Cadotte, A., Cadotte, D. W., Livne, M., Cohen-Adad, J., Fleet, D., Mikulis, D. & Fehlings, M. G. (2015). Spinal Cord Segmentation by One Dimensional Normalized Template Matching: A Novel, Quantitative Technique to Analyze Advanced Magnetic Resonance Imaging Data. PloS One, 10(10).

Castonguay, A., Thomas, S., Lesage, F. & Casanova, C. (2014). Repetitive and Retinotopically Restricted Activation of the Dorsal Lateral Geniculate Nucleus with Optogenetics. PloS One, 9(4).

Chapuis, R. P. (2015). Effective porosity and dispersion in stratified aquifers: closed-form solutions. (Rapport technique n° EPM-RT-2015-01).

Chapuis, R. P. (2007). References on field permeability tests performed in boreholes and monitoring wells. (Rapport technique n° EPM-RT-2007-04).

Chapuis, R. P. (2002). Solution analytique de l'écoulement en régime permanent dans un aquifère incliné à nappe libre, et comparaison de cette solution avec des solutions numériques plus complétes. (Rapport technique n° EPM-RT-2002-03).

Chapuis, R. P. & Aubertin, M. (2003). Predicting the coefficient of permeability of soils using the Kozeny-Carman equation. (Rapport technique n° EPM-RT-2003-03).

Chen, C. & Beltrame, G. (2017). An adaptive Markov model for the timing analysis of probabilistic caches. ACM Transactions on Design Automation of Electronic Systems, 23(1), p. 1-24.

Cherry, S. & Robillard, P. N. (2004). Mesure et analyse des activités collaboratives AD HOC retrouvées au cours d'un processus de génie logiciel. (Rapport technique n° EPM-RT-2004-03).

Chevrefils, C., Cheriet, F., Grimard, G., Miron, M.-C. & Aubin, C.-É. (2012). Quantitative evaluation of an automatic segmentation method for 3D reconstruction of intervertebral scoliotic disks from MR images. BMC Medical Imaging, 12.

Chyu, M.-C., Austin, T., Calisir, F., Chanjaplammootil, S., Davis, M. J., Favela, J., ... Zhang, Y.-T. (2015). Healthcare Engineering Defined: A White Paper. Journal of Healthcare Engineering, 6(4), p. 635-648.

Cimmino, M. (2018). Fast calculation of the g-functions of geothermal borehole fields using similarities in the evaluation of the finite line source solution. Journal of Building Performance Simulation, 11(6), p. 655-668.

Cimmino, M. (2018). A finite line source simulation model for geothermal systems with series- and parallel-connected boreholes and independent fluid loops. Journal of Building Performance Simulation, 11(4), p. 414-432.

Claveau-Mallet, D., Courcelles, B., Pasquier, P. & Comeau, Y. (2017). Numerical simulations with the P-Hydroslag model to predict phosphorus removal by steel slag filters. Water Research, 126, p. 421-432.

Cobetto, N., Aubin, C.-É., Clin, J., Le May, S., Desbiens-Blais, F., Labelle, H. & Parent, S. (2014). Braces optimized with computer-assisted design and simulations are lighter, more comfortable, and more efficient than plaster-cast braces for the treatment of adolescent idiopathic scoliosis. Spine Deformity, 2(4), p. 276-284.

Cobetto, N., Aubin, C.-É., Parent, S., Barchi, S., Turgeon, I. & Labelle, H. (2017). 3D correction of AIS in braces designed using CAD/CAM and FEM: a randomized controlled trial. Scoliosis and Spinal Disorders, 12(1).

Cobetto, N., Aubin, C.-É., Parent, S., Clin, J., Barchi, S., Turgeon, I. & Labelle, H. (2016). Effectiveness of braces designed using computer-aided design and manufacturing (CAD/CAM) and finite element simulation compared to CAD/CAM only for the conservative treatment of adolescent idiopathic scoliosis: a prospective randomized controlled trial. European Spine Journal, 25(10), p. 3056-3064.

Corinthios, M. J. (2016). Chrestenson transform FPGA embedded factorizations. SpringerPlus, 5(1), p. 1-23.

Corthésy, R., Leite, M. H. & Gill, D. E. (1996). Mesures des contraintes in-situ à la mine Kiena : projet IRSST. (Rapport technique n° EPM/RT-96/06).

Côté, J., Godin, G., Guéhéneuc, Y.-G., Rouleau, G., Ramirez-Garcìa, P., Otis, J., ... Fadel, G. (2012). Evaluation of a real-time virtual intervention to empower persons living with HIV to use therapy self-management: study protocol for an online randomized controlled trial. Trials, 13.

Craddock, R. C., Margulies, D. S., Bellec, P., Nichols, B. N., Alcauter, S., Barrios, F. A., ... Xu, T. (2016). Brainhack: a collaborative workshop for the open neuroscience community. GigaScience, 5(1), p. 1-8.

D

Daoud, H., Ezzati-jivan, N. & Dagenais, M. R. (2017, septembre). Dynamic trace-based sampling algorithm for memory usage tracking of enterprise applications. Communication écrite présentée à 2017 IEEE High Performance Extreme Computing Conference, Waltham, MA, USA (7 pages).

Dawood, I. & Aubertin, M. (2012). Influence of internal layers on water flow inside a large waste rock pile. (Rapport technique n° EPM-RT-2012-01).

Demers, V., Demarquette, N. R., Turenne, S. & Scalzo, O. (2016). Molding Properties of Inconel 718 Feedstocks Used in Low-Pressure Powder Injection Molding. Advances in Materials Science and Engineering, 2016, p. 1-7.

Demers-Roy, C. & Beaudry, J. (2003). Un véhicule robotisé pour le prototypage rapide de stratégies de guidage intelligent. (Rapport technique n° EPM-RT-2003-14).

Demers-Roy, C., Miralles, F. & Olivier, J.-F. (2003). Guidage assisté par ordinateur d'un tracteur remorque. (Rapport technique n° EPM-RT-2003-08).

Desfossez, J., Desnoyers, M. & Dagenais, M. R. (2016). Runtime latency detection and analysis. Software: Practice and Experience, 46(10), p. 1397-1409.

Deshommes, E., Tardif, R., Edwards, M., Sauvé, S. & Prévost, M. (2012). Experimental determination of the oral bioavailability and bioaccessibility of lead particles. Chemistry Central Journal, 6.

Diaz-Bolado, A., Laurin, J.-J. & Barriere, P.-A. (2013). Study of microwave tomography measurement setup configurations for breast cancer detection based on breast compression. International Journal of Antennas and Propagation, 2013, p. 1-12.

Dibike, Y., Shakibaeinia, A., Eum, H.-I., Prowse, T. & Droppo, I. (2018). Effects of projected climate on the hydrodynamic and sediment transport regime of the lower Athabasca River in Alberta, Canada. River Research and Applications, 34(5), p. 417-429.

Djioua, M. & Plamondon, R. (2008). The kinematic theory and minimum principles in motor control : a conceptual comparison. (Rapport technique n° EPM-RT-2008-03).

Djioua, M. & Plamondon, R. (2008). A new algorithm and system for the extraction of delta-lognormal parameters. (Rapport technique n° EPM-RT-2008-04).

Djioua, M., Plamondon, R. & Mathieu, P. A. (2008). Experimental observation of the proportional effect hypothesis of the kinematic theory : preliminary report. (Rapport technique n° EPM-RT-2008-07).

Doray, F. & Dagenais, M. R. (2016). Diagnosing performance variations by comparing multi-level execution traces. IEEE Transactions on Parallel and Distributed Systems, 28(2), p. 462-474.

Dorval Dion, C. A., Raphael, W., Tong, E. & Tavares, J. R. (2014). Photo-initiated chemical vapor deposition of thin films using syngas for the functionalization of surfaces at room temperature and near-atmospheric pressure. Surface and Coatings Technology, 244, p. 98-108.

Dorval Dion, C.-A. & Tavares, J. R. (2013). Photo-initiated chemical vapor deposition as a scalable particle functionalization technology (a practical review). Powder Technology, 239, p. 484-491.

E

Eca, L., Hoekstra, M., Hay, A. & Pelletier, D. (2005). A manufactured solution for a two-dimensional steady wall-bounded incompressible turbulent flow. (Rapport technique n° EPM-RT-2005-08).

Eca, L., Hoekstra, M., Hay, A. & Pelletier, D. (2006). Manufactured solutions for one-equation turbulence models in a two-dimensional steady wall-bounded incompressible turbulent flow. (Rapport technique n° EPM-RT-2006-02).

Edake, M., Darabi Mahboub, M. J., Dubois, J.-L. & Patience, G. S. (2017). Catalytic glycerol hydrogenolysis to 1,3-propanediol in a gas–solid fluidized bed. RSC Advances, 7(7), p. 3853-3860.

El Mendili, M.-M., Cohen-Adad, J., Pelegrini-Issac, M., Rossignol, S., Morizot-Koutlidis, R., Marchand-Pauvert, V., ... Pradat, P.-F. (2014). Multi-Parametric Spinal Cord MRI as Potential Progression Marker in Amyotrophic Lateral Sclerosis. PloS One, 9(4).

Eshkevari, L. M. (2010). Restructuring source code identifiers. (Rapport technique n° EPM-RT-2010-11).

Esmailzadeh, M. & Lakis, A. (2009). Prediction of the response of a thin structure subjected to a turbulent boundary-layer-induced random pressure field. (Rapport technique n° EPM-RT-2009-06).

Esmailzadeh, M., Lakis, A., Thomas, M. & Marcouiller, L. (2006). Three-dimensional modeling of curved structures partially or completely containing and/or submerged in fluid. (Rapport technique n° EPM-RT-2006-06).

Ezzati-Jivan, N. & Dagenais, M. R. (2015). Cube data model for multilevel statistics computation of live execution traces. Concurrency and Computation: Practice and Experience, 27(5), p. 1069-1091.

Ezzati-Jivan, N. & Dagenais, M. R. (2013). A framework to compute statistics of system parameters from very large trace files. ACM SIGOPS Operating Systems Review, 47(1), p. 43-54.

Ezzati-Jivan, N. & Dagenais, M. R. (2017). Multi-scale navigation of large trace data: A survey. Concurrency and Computation: Practice and Experience, 29(10), p. 1-20.

F

Fadlaoui, K. & Galinier, P. (2010). Covering design problem constructed by using the TS-CD algorithm. (Rapport technique n° EPM-RT-2010-01).

Fala, O., Molson, J., Dawood, I., Aubertin, M., Buissière, B. & Chapuis, R. P. (2011). Simulating water flow and reactive transport in waste rock piles using stochastic properties. (Rapport technique n° EPM-RT-2011-03).

Farand, P. & Tavares, J. R. (2017). A concept inventory for knowledge base evaluation and continuous curriculum improvement. Education for Chemical Engineers, 21, p. 33-39.

Farhanian, D., De Crescenzo, G. & Tavares, J. R. (2017). Kinetics, Chemistry, and Morphology of Syngas Photoinitiated Chemical Vapor Deposition. Langmuir, 33(8), p. 1780-1791.

Farhanian, D., Dorval Dion, C. A., Raphael, W., De Crescenzo, G. & Tavares, J. R. (2014). Combined extraction and functionalization of low-cost nanoparticles from municipal solid waste fly ash through PICVD. Journal of Environmental Chemical Engineering, 2(4), p. 2242-2251.

Farnia, F., Frayret, J.-M., Beaudry, C. & Lebel, L. (2015). Time-based combinatorial auction for timber allocation and delivery coordination. Forest Policy and Economics, 50, p. 143-152.

Farnia, F., Frayret, J.-M., LeBel, L. & Beaudry, C. (2013). Multiple-round timber auction design and simulation. International Journal of Production Economics, 146(1), p. 129-141.

Fayad, P. B., Zamyadi, A., Broseus, R., Prévost, M. & Sauvé, S. (2013). Degradation of progestagens by oxidation with potassium permanganate in wastewater effluents. Chemistry Central Journal, 7.

Fedorov, D. & Birglen, L. (2018). Differential noncircular pulleys for cable robots and static balancing. Journal of Mechanisms and Robotics, 10(6), p. 1-8.

Fedorov, D. & Birglen, L. (2018). Geometric optimization of a self-adaptive robotic leg. Transactions of the Canadian Society for Mechanical Engineering, 42(1), p. 49-60.

Fradet, L., Arnoux, P.-J., Callot, V. & Petit, Y. (2016). Geometrical variations in white and gray matter affect the biomechanics of spinal cord injuries more than the arachnoid space. Advances in Mechanical Engineering, 8(8), p. 168781401666470.

Fraser, S. A., Dupuy, O., Pouliot, P., Lesage, F. & Bherer, L. (2016). Comparable cerebral oxygenation patterns in younger and older adults during dual-task walking with increasing load. Frontiers in Aging Neuroscience, 8, p. 1-9.

Fu, T., Stipancic, J., Zangenehpour, S., Miranda-Moreno, L. & Saunier, N. (2017). Automatic traffic data collection under varying lighting and temperature conditions in multimodal environments: thermal versus visible spectrum video-based systems. Journal of Advanced Transportation, 2017, p. 1-15.

G

Gagné-Boisvert, L. & Bernier, M. (2018). Integrated model for comparison of one- and two-pipe ground-coupled heat pump network configurations. Science and Technology for the Built Environment, 24(7), p. 726-742.

Gagnon-Ouellette, C. & Fuamba, M. (2016). Discussion of "Role of Watershed Geomorphic Characteristics on Flooding in Indiana, United States" by Kuk-Hyun Ahn and Venkatesh Merwade. Journal of Hydrologic Engineering, 21(9), 07016011.

Gervais, J., Périé-Curnier, D., Parent, S., Labelle, H. & Aubin, C.-É. (2012). MRI signal distribution within the intervertebral disc as a biomarker of adolescent idiopathic scoliosis and spondylolisthesis. BMC Musculoskeletal Disorders, 13.

Ghorbaniaghdam, A., Chen, J., Henry, O. & Jolicoeur, M. (2014). Analyzing Clonal Variation of Monoclonal Antibody-Producing CHO Cell Lines Using an In Silico Metabolomic Platform. PloS One, 9(3).

Gill, D. E., Corthésy, R. & Leite, M. H. (2003). Les valeurs pratiques des propriétés mécaniques des roches. (Rapport technique n° EPM-RT-2003-05).

Gill, D. E., Leite, M. H. & Corthésy, R. (2002). Les instabilités structurales : guide d'analyse par stéréographie et de calcul des ancrages. (Rapport technique n° EPM-RT-2002-05).

Giraldeau, F. & Dagenais, M. R. (2016). Wait analysis of distributed systems using kernel tracing. IEEE Transactions on Parallel and Distributed Systems, 27(8), p. 2450-2461.

Girard, A. (2007). Identification des coefficients aérodynamiques et commande de vol non-linéaire. (Rapport technique n° EPM-RT-2007-02).

Girardin, G. & DeSantis, R. (2004). Contribution à l’élaboration d’un système de stationnement autonome : approche par les algorithmes de stabilisation. (Rapport technique n° EPM-RT-2005-03).

Goulet, J.-A. (2017). Bayesian dynamic linear models for structural health monitoring. Structural Control and Health Monitoring, 24(12), e2035.

Goulet, J.-A., Coutu, S. & Smith, I. F.C. (2013). Model falsification diagnosis and sensor placement for leak detection in pressurized pipe networks. Advanced Engineering Informatics, 27(2), p. 261-269.

Goulet, J.-A., Kiureghian, A. D. & Li, B. (2015). Pre-posterior optimization of sequence of measurement and intervention actions under structural reliability constraint. Structural Safety, 52, p. 1-9.

Goulet, J.-A. & Koo, K. (2018). Empirical validation of bayesian dynamic linear models in the context of structural health monitoring. Journal of Bridge Engineering, 23(2), p. 1-15.

Goulet, J.-A., Michel, C. & Kiureghian, A. D. (2015). Data-driven post-earthquake rapid structural safety assessment. Earthquake Engineering & Structural Dynamics, 44(4), p. 549-562.

Goulet, J.-A., Michel, C. & Smith, I. F.C. (2013). Hybrid probabilities and error-domain structural identification using ambient vibration monitoring. Mechanical Systems and Signal Processing, 37(1-2), p. 199-212.

Goulet, J.-A. & Smith, I. F. C. (2013). Performance-driven measurement system design for structural identification. Journal of Computing in Civil Engineering, 27(4), p. 427-436.

Goulet, J.-A. & Smith, I. F. C. (2013). Predicting the usefulness of monitoring for identifying the behavior of structures. Journal of Structural Engineering, 139(10), p. 1716-1727.

Goulet, J.-A. & Smith, I. F.C. (2013). Structural identification with systematic errors and unknown uncertainty dependencies. Computers & Structures, 128, p. 251-258.

Goulet, J.-A., Texier, M., Michel, C., Smith, I. F. C. & Chouinard, L. (2014). Quantifying the effects of modeling simplifications for structural identification of bridges. Journal of Bridge Engineering, 19(1), p. 59-71.

Granger, É., Savaria, Y. & Lavoie, P. (2002). A pattern reordering approach based on ambiguity detection for on-line category learning. (Rapport technique n° EPM-RT-2001-02).

Grmela, M., Grazzini, G., Lucia, U. & Yahia, L. (2013). Multiscale Mesoscopic Entropy of Driven Macroscopic Systems. Entropy, 15(11), p. 5053-5064.

Guerrouj, L. (2010). Automatic derivation of concepts based on the analysis of identifiers. (Rapport technique n° EPM-RT-2010-09).

H

Hafnaoui, I., Ayari, R., Nicolescu, G. & Beltrame, G. (2017). Scheduling real-time systems with cyclic dependence using data criticality. Design Automation for Embedded Systems, 21(2), p. 117-136.

Hajj-Hassan, M., Gonzalez, T., Ghafar-Zadeh, E., Djeghelian, H., Chodavarapu, V., Andrews, M. & Therriault, D. (2008). Direct-Dispense Polymeric Waveguides Platform for Optical Chemical Sensors. Sensors, 8(12).

Hamelin, B., Goussard, Y. & Dussault, J.-P. (2009). On the stopping criterion for numerical methods for linear systems with additive Gaussian noise. (Rapport technique n° EPM-RT-2009-10).

Hammami, I., Chen, J., Murschel, F., Bronte, V., De Crescenzo, G. & Jolicoeur, M. (2012). Immunosuppressive activity enhances central carbon metabolism and bioenergetics in myeloid-derived suppressor cells in vitro models. BMC Cell Biology, 13.

Hardy, S. & Robillard, P. N. (2003). Modélisation et simulation de processus de biologie moléculaire basée sur les réseaux de Pétri : une revue de littérature. (Rapport technique n° EPM-RT-2003-10).

Harmouche, R., Cheriet, F., Labelle, H. & Dansereau, J. (2013). Multimodal image registration of the scoliotic torso for surgical planning. BMC Medical Imaging, 13.

Harvey, V. C., Farand, P., Legros, R. & Tavares, J. R. (2015). On the average perception of perceived averages. Education for Chemical Engineers, 12, p. 12-19.

Hasan, S. R., Bélanger, N. & Savaria, Y. (2008). All digital skew tolerant synchronous interfacing methods for high-Performance point-to-point communication in DSM SoCs. (Rapport technique n° EPM-RT-2008-10).

Hassaine, S. (2010). Évolution biologique et applications en génie logiciel. (Rapport technique n° EPM-RT-2010-03).

Hosseininasab, S., Faucheux, N., Soucy, G. & Tavares, J. R. (2017). Full range of wettability through surface modification of single-wall carbon nanotubes by photo-initiated chemical vapour deposition. Chemical Engineering Journal, 325, p. 101-113.

Hou, Y., Liu, J. R., Buchanan, M., Thorpe, A. J. S., Poole, P. J., Liu, H. C., ... Zhang, X. P. (2012). Terahertz Generation Using Implanted InGaAs Photomixers and Multi-wavelength Quantum Dot Lasers. Nano-Micro Letters, 4(1), p. 10-13.

I

Imbeau, D., Aubry, K. & Chiasson, M.-È. (2012). Suivi du déploiement d’un programme d’amélioration continue augmenté d’un volet SST/ergonomie dans une entreprise manufacturière au Québec : recherche-action 2003-2010. (Rapport technique n° EPM-RT-2012-04).

J

Jacobberger, R. M., Kiraly, B., Fortin-Deschenes, M., Levesque, P. L., McElhinny, K. M., Brady, G. J., ... Arnold, M. S. (2015). Direct oriented growth of armchair graphene nanoribbons on germanium. Nature Communications, 6.

Javanbakht, T., Bérard, A. & Tavares, J. R. (2016). Polyethylene glycol and poly(vinyl alcohol) hydrogels treated with photo-initiated chemical vapor deposition. Canadian Journal of Chemistry/Revue canadienne de chimie, 94(9), p. 744-750.

Javanbakht, T., Laurent, S., Stanicki, D., Raphael, W. & Tavares, J. R. (2015). Charge effect of superparamagnetic iron oxide nanoparticles on their surface functionalization by photo-initiated chemical vapour deposition. Journal of Nanoparticle Research, 17(12).

Jiang, H., Nguyen, T. H. & Prud’homme, M. (2005). Inverse unsteady heat conduction problem of second kind. (Rapport technique n° EPM-RT-2005-06).

Jiang, H., Nguyen, T. H. & Prud’homme, M. (2005). Optimal control of induction heating for semi-solid metal forming. (Rapport technique n° EPM-RT-2005-07).

Jimenez-Triana, A., Zhu, G. & Saydy, L. (2014). Output-Feedback Control of a Chaotic MEMS Resonator for Oscillation Amplitude Enhancement. Mathematical Problems in Engineering, 2014, p. 1-13.

K

Kairy, D., Rushton, P., Archambault, P., Pituch, E., Torkia, C., El Fathi, A., ... Gourdeau, R. (2014). Exploring Powered Wheelchair Users and Their Caregivers’ Perspectives on Potential Intelligent Power Wheelchair Use: A Qualitative Study. International Journal of Environmental Research and Public Health, 11(2).

Kerboua, Y., Lakis, A., Thomas, M. & Marcouiller, L. (2006). Analyse dynamique des systèmes de plaques en intéraction avec un fluide et applications. (Rapport technique n° EPM-RT-2006-01).

Kerboua, Y., Lakis, A., Thomas, M. & Marcouiller, L. (2005). Comportement dynamique des plaques rectangulaires submergées. (Rapport technique n° EPM-RT-2005-05).

Kerboua, Y., Lakis, A., Thomas, M. & Marcouiller, L. (2006). Vitesse critique induite par un écoulement potentiel sur un système de plaques. (Rapport technique n° EPM-RT-2006-05).

Kerzazi, N. & Robillard, P. N. (2010). DSL4SPM: Domain-specific language for software process modeling. (Rapport technique n° EPM-RT-2010-15).

Kerzazi, N. & Robillard, P. N. (2010). Introducing knowledge concepts in software process modeling. (Rapport technique n° EPM-RT-2010-14).

Khomh, F., Di Penta, M., Guéhéneuc, Y.-G. & Antoniol, G. (2009). An exploratory study of the impact of software changeability. (Rapport technique n° EPM-RT-2009-02).

Khomh, F., Guéhéneuc, Y.-G. & Antoniol, G. (2009). Playing roles in design patterns: an empirical descriptive and analytic study. (Rapport technique n° EPM-RT-2009-03).

Khomh, F., Moha, N. & Guéhéneuc, Y.-G. (2009). DEQUALITE : méthode de construction de modèles de qualité prenant en compte la conception des systèmes. (Rapport technique n° EPM-RT-2009-04).

Kosmas, P., Chen, Y. & Martel, S. (2013). A Feasibility Study for Microwave Breast Cancer Detection Using Contrast-Agent-Loaded Bacterial Microbots. International Journal of Antennas and Propagation, 2013, p. 1-11.

Kouamé, K. G., Ezzati-Jivan, N. & Dagenais, M. R. (2015, juin). A flexible data-driven approach for execution trace filtering. Communication écrite présentée à IEEE International Congress on Big Data (BigData Congress 2015), New York, NY, USA (6 pages).

Kpodjedo, S., Galinier, P. & Antoniol, G. (2008). A Google-inspired error-correcting graph matching algorithm. (Rapport technique n° EMP-RT-2008-06).

Krishnaiah, K. V., Soares de Lima Filho, E., Ledemi, Y., Nemova, G., Messaddeq, Y. & Kashyap, R. (2016). Development of ytterbium-doped oxyfluoride glasses for laser cooling applications. Scientific Reports, 6, p. 1-12.

L

Lacroix, A. B., Langlois, J.M. P., Boyer, F.-R., Gosselin, A. & Bois, G. (2016, mars). Node configuration for the Aho-Corasick algorithm in Intrusion Detection Systems. Communication écrite présentée à ACM/IEEE Symposium on Architectures for Networking and Communications Systems (ANCS 2016), Santa Clara, Californie (2 pages).

Lafantaisie-Favreau, C.-H., Guzmán-Morales, J., Sun, J., Chen, G., Harris, A., Smith, T. D., ... Hoemann, C. D. (2013). Subchondral pre-solidified chitosan/blood implants elicit reproducible early osteochondral wound-repair responses including neutrophil and stromal cell chemotaxis, bone resorption and repair, enhanced repair tissue integration and delayed matrix deposition. BMC Musculoskeletal Disorders, 14.

Lafrance, S. & Mullins, J. (2002). Using admissible interference to detect denial of service attacks. (Rapport technique n° EPM-RT-2002-01).

Lajeunesse, A., Blais, M., Barbeau, B., Sauvé, S. & Gagnon, C. (2013). Ozone oxidation of antidepressants in wastewater – Treatment evaluation and characterization of new by-products by LC-QToFMS. Chemistry Central Journal, 7.

Lavoie, B. & Mahdi, T.-F. (2017). Comparison of two-dimensional flood propagation models: SRH-2D and Hydro_AS-2D. Natural Hazards, 86(3), p. 1207-1222.

Lavoie, T. M. & Merlo, E. (2011). Levenshtein edit distance-based type III clone detection using metric trees. (Rapport technique n° EPM-RT-2011-01).

Le Cunff, C., Biolley, F., Fontaine, E., Étienne, S. & Facchinetti, M. L. (2002). Vortex-induced vibrations of risers: theoretical, numerical and experimental investigation. Oil & gas science and technology, 57(1), p. 59-69.

Leblanc-Hotte, A., Chabot-Roy, G., Odagiu, L., Richaud, M., Lesage, S., Delisle, J.-S. & Peter, Y.-A. (2018). High-throughput refractive index-based microphotonic sensor for enhanced cellular discrimination. Sensors and Actuators B: Chemical, 266, p. 255-262.

Lefebvre, M. (2002). Modeling and forecasting the peak flows of a river. Mathematical Problems in Engineering, 8(6), p. 553-562.

Lefebvre, M. (2002). Survival maximization for a Laguerre population. Mathematical Problems in Engineering, 8(6), p. 563-574.

Lhachemi, H., Saussié, D. & Zhu, G. (2017). An Extension of Lyapunov’s First Method to Nonlinear Systems With Non-Continuously Differentiable Vector Fields. IEEE Control Systems Letters, 1(1), p. 74-79.

Li, L. & Aubertin, M. (2008). An investigation of the stress state in inclined backfilled stopes using flac-2D. (Rapport technique n° EPM-RT-2008-01).

Li, L. & Aubertin, M. (2011). Numerical and analytical solutions for the pore water pressures within barricades made of waste rocks. (Rapport technique n° EPM-RT-2011-02).

Li, M., Zhu, G., Savaria, Y. & Lauer, M. (2017). Reliability Enhancement of Redundancy Management in AFDX Networks. IEEE Transactions on Industrial Informatics, 13(5), p. 2118-2129.

Liu, G., Li, L., Yao, M., Landry, D., Malek, F., Yang, X. & Guo, L. (2017). An investigation of the Uniaxial Compressive Strength of a cemented hydraulic backfill made of alluvial sand. Minerals, 7(1), p. 1-13.

M

Machado, R. R. P., Soares de Lima Filho, E., Dutra, R. C., Barbosa Raposo, N. R., Duarte, R. S., Soares, G. L. G., ... Kaplan, M. A. C. (2012). Metabolic Activity Interferometer: A Powerful Tool for Testing Antibiotics. Journal of Sensors, 2012, p. 1-7.

Maïga, A. (2010). Détection et correction automatique des défauts de conception au moyen de l’apprentissage automatique pour l’amélioration de la qualité des systèmes. (Rapport technique n° EPM-RT-2010-12).

Malouin, B., Trépanier, J.-Y. & Gariépy, M. (2013). Interpolation of Transonic Flows Using a Proper Orthogonal Decomposition Method. International Journal of Aerospace Engineering, 2013, p. 1-11.

Marinova, M., Beaudry, C., Taoussi, A., Trepanier, M. & Paris, J. (2008). Economic Assessment of Rural District Heating by Bio-Steam Supplied by a Paper Mill in Canada. Bulletin of Science, Technology & Society, 28(2), p. 159-173.

Marleau, S. (2003). Modélisation et contrôle d'un manipulateur à 3 degrés de liberté. (Rapport technique n° EPM-RT-2003-13).

Martel, S. (2013). Combining Pulsed and DC Gradients in a Clinical MRI-Based Microrobotic Platform to Guide Therapeutic Magnetic Agents in the Vascular Network. International Journal of Advanced Robotic Systems, 10(1).

Martin, A. R., Aleksanderek, I., Cohen-Adad, J., Tarmohamed, Z., Tetreault, L., Smith, N., ... Fehlings, M. G. (2015). Translating state-of-the-art spinal cord MRI techniques to clinical use: A systematic review of clinical studies utilizing DTI, MT, MWF, MRS, and fMRI. NeuroImage - Clinical, 10.

Martin, A. & Beaudry, C. (2015). Measuring Collaboration Mechanisms in the Canadian Space Sector. New Space, 3(3), p. 172-178.

Martin, A., Sullivan, P., Beaudry, C., Kuyumjian, R. & Comtois, J.-M. (2012). Space medicine innovation and telehealth concept implementation for medical care during exploration-class missions. Acta Astronautica, 81(1), p. 30-33.

Mehand, M. S., Srinivasan, B. & De Crescenzo, G. (2015). Optimizing Multiple Analyte Injections in Surface Plasmon Resonance Biosensors with Analytes having Different Refractive Index Increments. Scientific Reports, 5.

Mehdi, D. & Boukas, E.-K. (2003). Stability and stabilizability of dynamical systems with multiple time-varying delays: delay-dependent criteria. Mathematical Problems in Engineering, 2003(4), p. 137-152.

Mehdi Zadeh, F., Trépanier, J.-Y. & Petro, E. (2013). Development and Validation of a New Boundary Condition for Intake Analysis with Distortion. International Journal of Aerospace Engineering, 2013, p. 1-12.

Menaa, M. & Lakis, A. (2013). Hybrid finite element method applied to the analysis of free vibration of a spherical shell filled with fluid. (Rapport technique n° EPM-RT-2013-04).

Menaa, M. & Lakis, A. (2013). Hybrid finite element method applied to the analysis of free vibration of spherical shell. (Rapport technique n° EPM-RT-2013-02).

Merlo, E., Deslauriers, B., Antoniol, G., Brunelle, P.-L., Jomphe, M., Bouchard, G., ... Hamet, P. (2004). Layered founders : a novel approach to investigate the ancestral transmission of complex traits. (Rapport technique n° EPM-RT-2004-05).

Merlo, E. & Lavoie, T. M. (2009). Detection of redundant clone relations based on clone subsumption. (Rapport technique n° EPM-RT-2009-05).

Merlo, E., Letarte, D. & Antoniol, G. (2006). Insider threat resistant SQL-injection prevention in PHP. (Rapport technique n° EPM-RT-2006-04).

Merzouki, A., Alameh, M., DeJesus, D., Jean, M., Darras, V., Thibault, M., ... Buschmann, M. D. (2012). Low molecular weight chitosan nanoparticulate system at low N:P ratio for nontoxic polynucleotide delivery. International Journal of Nanomedicine, 7, p. 1399-1414.

Mirnezami, S. R. & Beaudry, C. (2016). The effect of holding a research chair on scientists’ productivity. Scientometrics, 107(2), p. 399-454.

Mirnezami, S. R., Beaudry, C. & Larivière, V. (2016). What determines researchers’ scientific impact? A case study of Quebec researchers. Science and Public Policy, 43(2), p. 262-274.

Montplaisir-Gonçalves, A., Ezzati-Jivan, N., Wininger, F. & Dagenais, M. R. (2013, septembre). State history tree: an incremental disk-based data structure for very large interval data. Communication écrite présentée à International Conference on Social Computing (SocialCom 2013), Alexandria, VA, USA (9 pages).

N

Nadeau, A., Lungu, O., Duchesne, C., Robillard, M.-È., Bore, A., Bobeuf, F., ... Doyon, J. (2017). A 12-week cycling training regimen improves gait and executive functions concomitantly in people with Parkinson’s disease. Frontiers in Human Neuroscience, 10, p. 1-10.

Naldi, A. C., Fayad, P. B., Prévost, M. & Sauvé, S. (2016). Analysis of steroid hormones and their conjugated forms in water and urine by on-line solid-phase extraction coupled to liquid chromatography tandem mass spectrometry. Chemistry Central Journal, 10.

Nasri Lari, H., Chaouki, J. & Tavares, J. R. (2017). De-agglomeration of nanoparticles in a jet impactor-assisted fluidized bed. Powder Technology, 316, p. 455-461.

Nasri Lari, H., Farhanian, D., Boffito, D. C., Patience, G. S., De Crescenzo, G., Chaouki, J. & Tavares, J. R. (2017). Shedding light on iron pentacarbonyl photochemistry through a CVD case study. Catalysis Communications, 100, p. 19-23.

Nemati, H. & Dagenais, M. R. (2016, octobre). Virtual CPU state detection and execution flow analysis by host tracing. Communication écrite présentée à IEEE International Conferences on Big Data and Cloud Computing, Social Computing and Networking, Sustainable Computing and Communications (BDCloud 2016) (SocialCom 2016) (SustainCom 2016), Atlanta, GA, USA (9 pages).

Nemati, H., Sharma, S. D. & Dagenais, M. R. (2017, mai). Fine-grained nested virtual machine performance analysis through first level hypervisor tracing. Communication écrite présentée à 17th IEEE/ACM International Symposium on Cluster, Cloud and Grid Computing (CCGRID 2017), Madrid, Espagne (6 pages).

Nemova, G. & Kashyap, R. (2016). Silica bottle resonator sensor for refractive index and temperature measurements. Sensors, 16(1), p. 1-9.

Nguyen, L. H. & Goulet, J.-A. (2018). Anomaly detection with the Switching Kalman Filter for structural health monitoring. Structural Control and Health Monitoring, 25(4), p. 1-18.

Nguyen, L. H. & Goulet, J.-A. (2018). Structural health monitoring with dependence on non-harmonic periodic hidden covariates. Engineering Structures, 166, p. 187-194.

O

O’Reilly, C., Djioua, M. & Plamondon, R. (2006). Système de synthèse de l'écriture manuscrite par l'utilisation du modèle Sigma-lognormal : bilan de la conception et documentation de l'application SIMSCRIPT. (Rapport technique n° EPM-RT-2005-09).

O'Reilly, C. & Plamondon, R. (2014). Development and evaluation of a test battery for the assessment of brain stroke susceptibility from human movement analysis. (Rapport technique n° EPM-RT-2013-06).

O'Reilly, C., Plamondon, R. & Lebrun, L.-H. (2013). Linking the main modifiable brain stroke risk factors with human movements features. (Rapport technique n° EPM-RT-2013-07).

Ouellet, M., Gauthier, F., Merlo, E., Sozen, N. & Gagnon, M. (2012). Mapping features to source code in dynamically configured avionics software. (Rapport technique n° EPM-RT-2012-02).

P

Pasquier, R., D’Angelo, L., Goulet, J.-A., Acevedo, C., Nussbaumer, A. & Smith, I. F. C. (2016). Measurement, data interpretation, and uncertainty propagation for fatigue assessments of structures. Journal of Bridge Engineering, 21(5), 04015087-1-04015087-13.

Pasquier, R., Goulet, J.-A., Acevedo, C. & Smith, I. F. C. (2014). Improving fatigue evaluations of structures using in-service behavior measurement data. Journal of Bridge Engineering, 19(11), p. 1-10.

Pasquier, R., Goulet, J.-A. & Smith, I. F.C. (2017). Measurement system design for civil infrastructure using expected utility. Advanced Engineering Informatics, 32, p. 40-51.

Paula Pinheiro, M. A., Jugend, D., Demattê Filho, L. C. & Armellini, F. (2018). Framework proposal for ecodesign integration on product portfolio management. Journal of Cleaner Production, 185, p. 176-186.

Pelletier, K. & Léger, P. (2017). Nonlinear seismic modeling of reinforced concrete cores including torsion. Engineering Structures, 136, p. 380-392.

Périé-Curnier, D. & Curnier, D. (2010). Effect of pathology type and severity on the distribution of MRI signal intensities within the degenerated nucleus pulposus: application to idiopathic scoliosis and spondylolisthesis. BMC Musculoskeletal Disorders, 11.

Périé-Curnier, D., Dahdah, N., Foudis, A. & Curnier, D. (2013). Multi-parametric MRI as an indirect evaluation tool of the mechanical properties of in-vitro cardiac tissues. BMC Cardiovascular Disorders, 13.

Picard-Krashevski, G. (2018). Optimisation des algorithmes de planification et d'évitement d'obstacle d'un bras robotique. (Rapport de stage).

Pickenhahn, V., Grange, M., De Crescenzo, G., Lavertu, M. & Buschmann, M. (2017). Regioselective chitosan end-group activation: the triskelion approach. RSC Advances, 7(30), p. 18628-18638.

Pinciroli, C. & Beltrame, G. (2016). Swarm-Oriented Programming of Distributed Robot Networks. Computer, 49(12), p. 32-41.

Plantard, P., Auvinet, E., Pierres, A.-S. & Multon, F. (2015). Pose Estimation with a Kinect for Ergonomic Studies: Evaluation of the Accuracy Using a Virtual Mannequin. Sensors, 15(1).

Prieur-Drevon, L., Beamonte, R., Ezzati-Jivan, N. & Dagenais, M. R. (2016, juin). Enhanced state history tree (eSHT): a stateful data structure for analysis of highly parallel system traces. Communication écrite présentée à IEEE International Congress on Big Data (BigData Congress 2016), San Francisco, CA, USA (8 pages).

Puigagut, J., Chazarenc, F. & Comeau, Y. (2014). Influence of tubificid worms on nutrient fluxes across water-sediment interface in fish farm settling ponds. Knowledge and Management of Aquatic Ecosystems (413), p. 1-12.

Q

Quach, A. N.-O., Tabor, L., Dumont, D., Courcelles, B. & Goulet, J.-A. (2017). A machine learning approach for characterizing soil contamination in the presence of physical site discontinuities and aggregated samples. Advanced Engineering Informatics, 33, p. 60-67.

R

Rechka, S., Roy, G., Dennetière, S. & Mahseredjian, J. (2004). Modélisation de systèmes électromécaniques multi-masses à base de machines asynchrones, à l'aide des outils MATLAB et EMTP, avec application aux éoliennes. (Rapport technique n° EPM-RT-2004-04).

Recuerda, M., Périé-Curnier, D., Gilbert, G. & Beaudoin, G. (2012). Assessment of mechanical properties of isolated bovine intervertebral discs from multi-parametric magnetic resonance imaging. BMC Musculoskeletal Disorders, 13.

Reyjal, M., Tavares, J. R., Virgilio, N. & Fradette, L. (2013). Is the Maxwell–Garnett continuum model valid to predict the thermal conductivity of particle-stabilized (Pickering) emulsions? Industrial & Engineering Chemistry Research, 52(13), p. 4962-4966.

Riahi, D., St-Onge, P.-L. & Bilodeau, G.-A. (2012). RECTGAUSS-Tex : block-based background subtraction. (Rapport technique n° EPM-RT-2012-03).

Robillard, L. (2003). Contrôle automatisé de la fréquence d'une corde de clavecin. (Rapport technique n° EPM-RT-2003-07).

Robitaille, J., Chen, J. & Jolicoeur, M. (2015). A Single Dynamic Metabolic Model Can Describe mAb Producing CHO Cell Batch and Fed-Batch Cultures on Different Culture Media. PloS One, 10(9).

Rohrbach, A., Torabi, A., Rohrbach, M., Tandon, N., Pal, C., Larochelle, H., ... Schiele, B. (2017). Movie description. International Journal of Computer Vision, 123(1), p. 94-120.

Rotaba, Z. & Beaudry, C. (2009). The renewal and transformation of high, medium and low tech: a comparative approach. International Journal of Technology Marketing, 4(4), p. 292.

S

Sabane, A. (2010). Améliorer la testabilité et les tests des systèmes à l'aide des patrons. (Rapport technique n° EPM-RT-2010-08).

Saborido, R., Beltrame, G., Khomh, F., Alba, E. & Antoniol, G. (2016). Optimizing user experience in choosing android applications. (Rapport technique n° EPM-RT-2016-03).

Sadid, W. H., Abobakr, S. A. & Zhu, G. (2017). Discrete-Event Systems-Based Power Admission Control of Thermal Appliances in Smart Buildings. IEEE Transactions on Smart Grid, 8(6), p. 2665-2674.

Samson, R. S., Lévy, S., Schneider, T., Smith, A. K., Smith, S. A., Cohen-Adad, J. & Gandini Wheeler-Kingshott, C. A. M. (2016). ZOOM or non-ZOOM? Assessing spinal cord diffusion tensor imaging protocols for multi-centre studies. PLoS ONE, 11(5), p. 1-14.

Saussié, D., Akhrif, O. & Saydy, L. (2005). Longitudinal flight control design with handling quality requirements. (Rapport technique n° EPM-RT-2005-01).

Schiffauerova, A. & Beaudry, C. (2009). Canadian nanotechnology innovation networks: intra-cluster, inter-cluster and foreign collaboration. Journal of Innovation Economics, 4(2), p. 119.

Schiffauerova, A. & Beaudry, C. (2011). Star scientists and their positions in the Canadian biotechnology network. Economics of Innovation and New Technology, 20(4), p. 343-366.

Schiffauerova, A. & Beaudry, C. (2012). Who owns the intellectual property and where? The case of Canadian biotechnology. International Journal of Biotechnology, 12(3), p. 147.

Sharma, S. D., Bastien, G., Nemati, H. & Dagenais, M. R. (2016, décembre). Low overhead hardware-assisted virtual machine analysis and profiling. Communication écrite présentée à 2016 IEEE Globecom Workshops (GC Wkshps), Washington, DC, USA (6 pages).

Sharma, S. D. & Dagenais, M. R. (2016). Hardware-assisted instruction profiling and latency detection. The Journal of Engineering, 2016(10), p. 367-376.

Shirazi, A., Li, L. & Aubertin, M. (2006). Numerical implementation of an elasto-plastic model based on the MSDPu multiaxial criterion. (Rapport technique n° EPM-RT-2006-08).

Simard, P., Galarneau, H., Marois, S., Rusu, D., Hoemann, C. D., Poubelle, P. E., ... Fernandes, M. J.G. (2009). Neutrophils exhibit distinct phenotypes toward chitosans with different degrees of deacetylation: implications for cartilage repair. Arthritis Research and Therapy, 11(3).

Soh, Z. & Guéhéneuc, Y.-G. (2013). Towards the exploration strategies by mining Mylyns' interaction histories. (Rapport technique n° EPM-RT-2013-01).

Stip, E., Lungu, O. V., Anselmo, K., Letourneau, G., Mendrek, A., Stip, B., ... Bentaleb, L. A. (2012). Neural changes associated with appetite information processing in schizophrenic patients after 16 weeks of olanzapine treatment. Translational Psychiatry, 2(6).

Stone, A., Jain, H., Dierolf, V., Sakakura, M., Shimotsuma, Y., Miura, K., ... Kashyap, R. (2015). Direct laser-writing of ferroelectric single-crystal waveguide architectures in glass for 3D integrated optics. Scientific Reports, 5.

Stroman, P.W., Wheeler-Kingshott, C., Bacon, M., Schwab, J.M., Bosma, R., Brooks, J., ... Tracey, I. (2014). The current state-of-the-art of spinal cord imaging: Methods. NeuroImage, 84, p. 1070.

T

Tabor, L., Goulet, J.-A., Charron, J.-P. & Desmettre, C. (2018). Probabilistic modeling of heteroscedastic laboratory experiments using Gaussian process regression. Journal of Engineering Mechanics, 144(6), p. 1-10.

Tahmooresnejad, L. & Beaudry, C. (2015). Does government funding have the same impact on academic publications and patents? The case of nanotechnology in Canada. International Journal of Innovation Management, 19(03).

Tahmooresnejad, L., Beaudry, C. & Schiffauerova, A. (2015). The role of public funding in nanotechnology scientific production: Where Canada stands in comparison to the United States. Scientometrics, 102(1), p. 753-787.

Tan, S., Soulez, G., Diez Martinez, P., Larrivée, S., Stevens, L.-M., Goussard, Y., ... Chartrand-Lefebvre, C. (2016). Coronary stent artifact reduction with an edge-enhancing reconstruction kernel : a prospective cross-sectional study with 256-slice CT. PLOS ONE, 11(4), e0154292-e0154305.

Tan, S., Soulez, G., Diez Martinez, P., Larrivée, S., Stevens, L.-M., Goussard, Y., ... Chartrand-Lefebvre, C. (2016). Coronary stent artifact reduction with an edge-enhancing reconstruction kernel – A prospective cross-sectional study with 256-clice CT. PLoS ONE, 11(4), p. 1-14.

Thalla, P. K., Contreras-García, A., Fadlallah, H., Barrette, J., De Crescenzo, G., Merhi, Y. & Lerouge, S. (2013). A Versatile Star PEG Grafting Method for the Generation of Nonfouling and Nonthrombogenic Surfaces. BioMed Research International, 2013.

Tournerie, B. & Chouteau, M. (2002). Analysis of magnetotelluric data along the Lithoprobe seismic line 21 in the Blake River Group, Abitibi, Canada. Earth, Planets and Space, 54(5), p. 575-589.

Toussaint, C., Henry, O. & Durocher, Y. (2016). Metabolic engineering of CHO cells to alter lactate metabolism during fed-batch cultures. Journal of Biotechnology, 217(C), p. 122-131.

Trabelsi, A., Boyer, F.-R. & Savaria, Y. (2006). On the application of minimum noise tracking to cancel cosine shaped residual noise. (Rapport technique n° EPM-RT-2006-09).

Trpevski, I., Dimitrova, T., Boshkovski, T., Stikov, N. & Kocarev, L. (2016). Graphlet characteristics in directed networks. Scientific Reports, 6, p. 1-8.

V

Vahdat, S., Lungu, O., Cohen-Adad, J., Marchand-Pauvert, V., Benali, H. & Doyon, J. (2015). Simultaneous Brain–Cervical Cord fMRI Reveals Intrinsic Spinal Cord Plasticity during Motor Sequence Learning. PLoS Biology, 13(6).

van Wendel de Joode, B., Barbeau, B., Bouchard, M. F., Mora, A. M., Skytt, Å., Córdoba, L., ... Mergler, D. (2016). Manganese concentrations in drinking water from villages near banana plantations with aerial mancozeb spraying in Costa Rica: Results from the Infants' Environmental Health Study (ISA). Environmental Pollution, 215(C), p. 247-257.

Vergé, A. (2013). Conception d'un analyseur de binaire ARM. (Rapport technique n° EPM-RT-2013-03).

Vergé, A., Ezzati-Jivan, N. & Dagenais, M. R. (2017). Hardware-assisted software event tracing. Concurrency and Computation: Practice and Experience, 29(10), p. 1-9.

Vulliet, F., Ben Ftima, M. & Léger, P. (2017). Stability of cracked concrete hydraulic structures by nonlinear quasi-static explicit finite element and 3D limit equilibrium methods. Computers & Structures, 184, p. 25-35.

W

Wininger, F., Ezzati-Jivan, N. & Dagenais, M. R. (2017). A declarative framework for stateful analysis of execution traces. Software Quality Journal, 25(1), p. 201-229.

Wu, W., Guéhéneuc, Y.-G., Antoniol, G. & Kim, M. (2013). HALO : a multi-feature two-pass analysis to identify framework API evolution. (Rapport technique n° EPM-RT-2013-05).

Y

Yang, K., Li, M., Zhu, G. & Savaria, Y. (2017). A DAQM-Based Load Balancing Scheme for High Performance Computing Platforms. IEEE Access, 5, p. 22504-22513.

Z

Zaimi, A., Duval, T., Gasecka, A., Côté, D., Stikov, N. & Cohen-Adad, J. (2016). AxonSeg: open source software for axon and myelin segmentation and morphometric analysis. Frontiers in Neuroinformatics, 10, p. 1-13.

Zhang, C., Bélanger, S., Pouliot, P. & Lesage, F. (2015). Measurement of Local Partial Pressure of Oxygen in the Brain Tissue under Normoxia and Epilepsy with Phosphorescence Lifetime Microscopy. PloS One, 10(8).

Zhang, K. & Kummert, M. (2017). Impact of Maestro thermostats on heating energy use. (Rapport d'étude).

Zhang, Y., Jin, Y., Yao, J., Zhu, G. & Wen, B. (2017). Power peak shaving with data transmission delays for thermal management in smart buildings. IEEE Transactions on Industrial Informatics.

Zheng, J. & Zhu, G. (2015). In-Domain Control of a Heat Equation: An Approach Combining Zero-Dynamics Inverse and Differential Flatness. Mathematical Problems in Engineering, 2015, p. 1-10.

Liste produite: Sat Dec 15 01:33:29 2018 EST.